Unable to install SP1 after reinstalling windows 7 from recovery disks from onekey revoery

Windows shows as activated but updates do not work, cannot install SP1 from download gives a critcal error.

hi Hozby,
Welcome to the Lenovo Forums.
Are you trying to install Windows 7 SP1 via the Windows Update? If you do and you get an error using this method, try to:
1. Check this Windows 7 Service Pack 1 Article
2. Run the Windows 7 SP1 Disk Cleanup Tool
2. Download and install Windows 7 SP1 from a Standalone Installer (see details below)
For Windows 7 64bit:
windows6.1-KB976932-X64.exe  - 903.2 MB
For Windows 7 32bit:
windows6.1-KB976932-X86.exe - 537.8 MB
Let me know your findings.
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Laptop keeps booting up after Reinstalling Windows with Recovery Disks

    My hard drive died. I replaced it and reinstalled windows using the recovery disks that came with it.
    After a successful installation (formatting the drive, installing software in 3 CDs) the computer keeps rebooting endlessly. The reboot process never leaves the intial TOSHIBA screen that access the CMOS therefore windows never starts.
    What is wrong? 
    Thanks in advance....
    Laptop: 2430-S255, Windows XP Pro, BIOS V1.6  
    Solved!
    Go to Solution.

    I got it to work..... The solution: Even though I was not getting any errors during the recovery (only when rebooting after the install) I read about issues with the software recognizing the computer as the one entitle for that installation. I downloaded the "DMI Update Utility" installed it and reinstalled the software again from the recovery CDs with no issues this time..... Thanks for your interest Techman....

  • New windows 8 recovery disks from HP installed but won't work

    I installed a new hard drive in a friends Dell G6-2249WM. She didn't make recovery disks so I ordered them from HP.
    They seem to install fine, I click "Finish" and the notebook shuts down. When I start it I get:
    Boot device not found
    Please install an operating system on your hard disk
    Hard disk (3F0)
    F2  System diagonstics
    for information, please visit: www.hp.com\go\techcenter\startup
    I've run Hard drive diagonstics, it passes.
    I've reset the bios to default.
    I've hit Esc at start up, then hit F11 - the notebook then just goes back to the above "Boot device not found" screen.
    I've removed all formating on the drive (on another computer). Reinstalled the Recovery disks and still have the same problem.
    I received 3 Windows 8 Recovery disks and 1 Application and Recovery DVD from HP.

    Sorry, your right, the one I'm working on is a HP G6-2249WM. MY laptop is a Dell. I did reseat the drive after the first install try. The hard drive test says it passes. I just tryed reinstalling the disks without the 4th "Application and driver disk".  still didn't work. It formats and loads all the files on the disks but then won't start the recovery after shut down.  I took the drive out and connected it to my desk top computer. I has 2 partitions, one with 18.9 gb with one boot.sdi, one boot.wim a seperate RM folder containing several base.swm files and one bild.wim file. The other partition is empty. Is there a way to force the recovery partition to unpack and start?

  • How to activate labview 2009 sp1 after reinstall window?

    hi
    my camputer was installed labview 2009 and it was activated by the academic license. Currently, i reinstalled the window and i cannot activate the labview 2009. So how can i activate it?

    Hi,
    In the license manager (Start » National Instruments » License Manager) you should set the correct parameters concerning your license server.
    Regards,
    Da Helmut

  • Did not know the key after reinstall Windows 8 - got invoice from notebook

    what is the normal way to become the key for windows 8 back?
    I ve got the original invoice for the notebook include the windows 8  ?

    Just wanted to update this thread...
    Apparently these issues were caused by incompatibility/installer issues between CS3 and CS4.
    I uninstalled CS3, the correct way through Windows 7 Uninstall/Remove Programs. I ran the CS5 Cleaner tool, though it said there was nothing found. I used a free registry cleaning tool - just in case.
    Then I reinstalled CS3 completely and everything seems to be in working order!
    Thanks to everyone on the forums and to Jeff Wright for his helpful answer.

  • When i insert my recovery disk from hp nothing comes up to start the recovery process

    i just got the three windows 7 recovery disks from hp in mail(application and driver recovery dvd, and the two system recovery dvds) and when i put first system recovery disk in nothing comes up for me to start recovery what can i do

    Hi:
    When you boot from the DVD drive with disk 1 in the DVD-ROM drive, nothing happens?
    You need to restart the PC, and at the HP welcome screen, tap the F9 key to get the boot menu.  You then select the DVD-Rom to boot from and then follow the on screen prompts and instructions.
    Paul

  • Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

    Unable to install iTunes after converting from Windows Vista to Windows 7.  Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).  I have my iPod plugged into my computer via USB port.  What am I doing wrong?

    i have the only account on my laptop so have checked and am the account administrator
    i run windows 7 home premium
    I have the same problem and
    have followed the link uninstalling in the correct order,
    then restarted as per instructions,
    went to Apple to download itunes,
    hit download now,
    Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
    did not get a save instead of run prompt
    Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
    If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
    i can only click run as administrator from right clicking the shortcut on my desktop screen
    If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
    sick of doing this
    at least 7 or 8 times i have re installed itunes to no avail
    troubleshooting no better
    please help. pulling my hair out at this stage
    it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
    not working since i clicked yes
    also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
    really dont want to have to restore factory settings

  • Installing network controller driver after reinstalling Windows 7 on HP TouchSmart 310-1038d

    Hi, I have a HP TouchSmart 310-1038d; Serial number 4CSO4309SH; Windows 7 64 bit. After reinstalling Windows 7, the following devices are not working properly (am not able to connect to any network). I tried installing the original drivers form the HP website but the network controller does not seem to install properly:
    Network Controller
    PCI\VEN_14E4&DEV_4357&SUBSYS_057014E4&REV_01
    PCI\VEN_14E4&DEV_4357&SUBSYS_057014E4
    PCI\VEN_14E4&DEV_4357&CC_028000
    PCI\VEN_14E4&DEV_4357&CC_0280
    Multimedia Video Controller
    PCI\VEN_1033&DEV_0165&SUBSYS_650B1461&REV_0B
    PCI\VEN_1033&DEV_0165&SUBSYS_650B1461
    PCI\VEN_1033&DEV_0165&CC_040000
    PCI\VEN_1033&DEV_0165&CC_0400
    Unknown device
    ACPI\ITE8715
    *ITE8715
    Kindly please help! thank you

    Hi:
    See if these drivers work...
    Wireless:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105719-1&cc=us&dlc=en&lc=en
    Unknown device:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-97502-1&cc=us&dlc=en&lc=en&...
    Multimedia Video Controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-77814-1&cc=us&dlc=en&lc=en&...

  • Acrobat 10 Pro: Unable to Install Updates After Virus Removed: Receive Error 1310 ?

    Acrobat 10 Pro: Unable to Install Updates After Virus Removed: Receive Error 1310 ?
    Attempted to re-install the original Adobe Acrobat 10 Pro from the disk provided with the purchase; and it has put me in a trial; and is requesting that I purchase the software I already paid for, two years ago.

    You can try a repair (may need to go to Control Panel>Programs & Features). A reinstall is a last resort, but if you go there be sure to uninstall from the control panel, run http://labs.adobe.com/downloads/acrobatcleaner.html, and remove any part left of the Acrobat folder. Then reboot as the administrator and reinstall. Be sure to disable antivirus during the install.

  • Sync problem after reinstalling windows

    Last week I had Windows XP with the latest version of iTunes and my iPod could sync without any problems. But after I installed Windows 7, even if I have the same iTunes version, it won't sync anymore. I even tried a reset on the iPod and reinstalling iTunes, nothing works. I don't even get an error message. All it says is this:
    The iPod 'Vicky' cannot be synced. An internal device error occured.
    The iPod 'Vicky' cannot be synced. A folder was specified instead of a file.
    The iPod 'Vicky' cannot be synced. An unknown error occured (0xE8004006).
    The iPod 'Vicky' cannot be synced. There are too many files open currently.
    Another one with a duplicate file, but I can't get it to appear right now.
    It's always a different one. And sometimes iTunes even crashes and I have to reopen it.
    What should I do?

    have chosen to manually manage my iTunes library rather than copying all these MP3s to the iTunes folder.
    Do you mean you checked *Manually manage music and videos* when the iPhone is selected? This is completely sepearate from managing yoru library. This allows you to manually manage the content on the iPhone.
    Can I backup iTunes without actually making a backup of all my music files?
    Yes. Copy /Music/iTunes/folder to the external drive.
    My problem is that after reinstalling Windows my iPhone now wants to erase itself
    So you have already reinstalled Windows?
    If so, you cannot backup anything that is not there since you you already erased it when you reinstalled Windows.
    BEFORE you reinstall Windows, you need to Deauthorize iTunes and backup /Music/iTunes/folder and all your media.

  • Cannot sync device after reinstall Windows

    Cannot sync device after reinstall Windows 7.
    It is fine when transfer from devices to itunes, but cannot transfer from iTunes to devices. Computer is authorize, same apple store login on both itunes and ipad, but it just wouldn't allow me transfer the apps.

    Was this installed from the CD or from a download from HP?
    With one system working and this one not working, it sounds like an issue with the software than anything else.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • TS1702 After reinstalling windows, I cannot transfer app purchases to my iphone.

    I had to wipe the hard drive on my computer after it got a virus that I was unable to remove. I backed everything up before wiping the hard drive. After reinstalling windows, I installed itunes and synced my iphone with my computer. Itunes recognizes that I purchased apps previously as they downloaded to my library, and I can make new purchases in the store. However, after purchasing an app, when I try to drag and drop the app to my phone through itunes, a little circle with a slash through it appears and it will not let me download the app to my phone. I can download apps through my phone, but I would like to be able to sync them with my computer as well since I have to put music on my iphone and I generally only purchase through amazon. How can I fix this? Thanks!

    I am having the same issue. I tried rebooting/resetting my iPhone 4s running 5.0.1. Restarted iTunes. Still unable to update Apps.  Screen is clouded/gray.  Cannot even move the Apps on the screen. When I press/hold an App on the iPhone to make them jiggle, I use to get the circle X on the App to delete. That is no longer available.

  • Unable to Install ERP Software on Windows 8.1 Pro

    Dear Team,
    PLease be informed as i am using window 8.1 Single Language  and unable to install ERP software. its getting hanged during the phase of installation of Microsoft data acess 2.0.
    your Valuable support be highly appreciated.
    Thanks,
    Prabhu Nath Gupta
    +91-9540685870

    Sandeep,
    I downloaded the file, but it will not open.  It has a .dmg extension, and apparently I don't have the necessary app to unpack it.Help please.
    Gary
          From: Sandeep Singh <[email protected]>
    To: Gary Tibbals <[email protected]>
    Sent: Wednesday, February 25, 2015 11:17 AM
    Subject:  Unable to install Elements 12 on Windows 8.1
    Unable to install Elements 12 on Windows 8.1
    created by Sandeep Singh in Photoshop Elements - View the full discussionHi Gary , Thanks for posting on Adobe forums. Could you please share a screen shot of the error ?Are you trying to install from a Disc ?If Yes, please try to download and install Photoshop Elements from this link:Download Photoshop Elements products
    13, 12, 11, 10 Regards,Sandeep If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7229289#7229289 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7229289#7229289 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Unable to install Elements 12 on Windows 8.1

    When I try to install Elements 12 on Windows 8.1, the install fails.  It says it needs DirectPlay, but according to Microsoft, that has been depricated.  I'm caught in a vicious loop trying to get Elements 12 installed on my PC.  What's up with that? 

    Sandeep,
    I downloaded the file, but it will not open.  It has a .dmg extension, and apparently I don't have the necessary app to unpack it.Help please.
    Gary
          From: Sandeep Singh <[email protected]>
    To: Gary Tibbals <[email protected]>
    Sent: Wednesday, February 25, 2015 11:17 AM
    Subject:  Unable to install Elements 12 on Windows 8.1
    Unable to install Elements 12 on Windows 8.1
    created by Sandeep Singh in Photoshop Elements - View the full discussionHi Gary , Thanks for posting on Adobe forums. Could you please share a screen shot of the error ?Are you trying to install from a Disc ?If Yes, please try to download and install Photoshop Elements from this link:Download Photoshop Elements products
    13, 12, 11, 10 Regards,Sandeep If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7229289#7229289 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7229289#7229289 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Can't open PSD file after reinstall windows 7 64 bit

    After reinstalling windows 7 stopped opening some files PSD files. I try to open them with Photoshop version 6, it does not work. I tried to open them on the laptop, same garbage. Tell me what the problem is. And how to fix it.
    Thank you.

    Perhaps these files were corrupted. I can not say how it happened, but it is quite possible. And the files are no longer open, immediately after reinstalling windows? Or not?
    If so, it is quite rare in my opinion. You are very unlucky. Try reinstalling photoshop. Then check these files were opened or not. If not. Then the only option is a special software. I would use on your site this program
    http://www.photoshop.recoverytoolbox.com/
     (it is not free but is very good and is not expensive. But in the future you will immune from such situations. )
    As well you can learn more about your problem here:
    http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/207-can-t-open-a-psd-file-through-photoshop

Maybe you are looking for