Unable to install SQL server 2000 and 2005 on Satellite A205-s5831
Hello everyone.
I Needs some helps from all of you.
I have Toshiba Laptop Satellite A205-S5831.
Its Have Windows Vista Home Premium.
And I am unable to install SQL server 2000 and 2005.
I also Unable to Install Windows XP SP2.
Problem is SATA driver.
Plz Help me ...!
Response me
Hi
The Windows XP needs a SATA driver if you want to install it on the notebook with SATA HDD controller.
The SATA driver can be found in the Intel Storage Manager.
I would recommend using the nLite program to include a SATA driver into the new Windows XP CD and then to boot from the new created XP CD.
Here you will find all details regarding the nLite:
http://www.nliteos.com/
Regarding SQL server issue;
Maybe you will be able to install in on Windows XP. Possibly there is a compatibility issue between the Vista and the SQL server software
Similar Messages
-
Unable to install SQL Server CE Server Tool on SQL Server 2000 SP 4
Hi
I am facing problem with installing SQL Server CE Server Tool,
I have installed SQL Server 2000 SP 4 which is working fine.
While i am running Setup of "SQL Server 2000 Windows CE Edition version 2.0" ,Developer tools installed successfully but incase of SQL Server CE Server Tool i am getting following Error
"SQL Server CE Tool is compatible only with SQL Server 2000 Service pack 1 and higher.
When you install SQL Server CE Server Tools on a computer running both IIS and SQL Server 2000 , ensure the installer for SQL Server CE Server Tools corresponds To the version of SQL Server 2000."
I am sure that i have running SQL Server 2000 SP 4 (MSDE also SP 4) , IIS (Version 5.1) is also working fine , and one more thing i am trying to install SQL Server CE Server Tool setup is "sqlce20sql2ksp4.exe" (Which i downloaded from microsoft site.).Here all the requirement is fulfill but i dont know what is going to wrong.
I wasted my 2 days behind solving this issue , now i am tiered ,So please any one have solution for this issue.
Help me please.
Thanks in advance.
Regards,
Ketan Gohil
([email protected],[email protected],[email protected])Refer this link,
http://social.technet.microsoft.com/Forums/sqlserver/en-US/a8591747-689d-4a2e-b301-86094daf6cec/unable-to-install-sql-server-ce-server-tool-on-sql-server-2000-sp-4?forum=sqlce
http://www.vbforums.com/showthread.php?472623-Compatible-SQL-Server-CE-installer
Regards, RSingh -
Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS
Another user,
Cheer08, has replied to a thread you have subscribed to in the
SQL Server Express Forum.
Here are the error messages:
Error 2
Error 1
Hello,
This error is related to Microsoft Visual C++ 2005. Could you try to download and install Microsoft Visual C++ 2005 with service pack 1 (SP1) included:
http://www.microsoft.com/en-us/download/details.aspx?id=5638 (x86 or 32-bit)
http://www.microsoft.com/en-us/download/details.aspx?id=18471
(x64 or 64-bit)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thread Title Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS.
Started by: FenixRising
Reply:
Fenix, this is SQL Server forum. Regarding the Visual C++ 2005 SP1 Redistributable setup issue, you need to post question in
visual studio forum to get better help.
After installing Visual C++ 2005 SP1 Redistributable successfully,are you able to install SQL Server? If not, share us SQL Server setup logs. This link
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx will help you View and Read SQL Server Setup Log Files
Im going to run it now. Get back to you.Hi,
I am unable to install SQL Server 2012. I have the install log, but I don't can't read them.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2053898239
Start time: 2015-02-08 23:03:01
End time: 2015-02-08 23:07:31
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: RLC_WORK
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012
Client Tools Connectivity 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools Backwards Compatibility 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools SDK 1033
11.2.5058.0 No Yes
SQL Server 2012
SQL Server Data Tools 1033 Express Edition
11.2.5058.0 No Yes
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\76766b629842c4dc54646a47c04202\x64\setup\
Installation edition: Express
Slipstream: True
SP Level 2
Product Update Status:
Success: KB 2958429
Product Updates Selected for Installation:
Title: Service Pack 2
Knowledge Based Article: KB 2958429
Version: 11.2.5058.0
Architecture: x64
Language: 1033
Update Source: Slipstream
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, SSMS, ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: RLC_WORK\Robert
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: Slipstream
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\SystemConfigurationCheck_Report.htm
Fenix -
Unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1
Apologies if this is not the right place or this has been posted before (I looked and didn't find anything)
I am unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1, as I get an 'Operating System not Supported' error message right away.
What can I do to get this working?Hi Zgreve,
Usually, from
hardware and software requirements for installing SQL Server 2014, we can install SQL Server Express version on the Windows 8.1. For more information, see:
Microsoft SQL Server 2014 Express.
Before you install SQL Server 2014 Express version, you should ensure installing the .NET Framework 4, then run as administrator for the SQL Server setup.exe again.
There is a similar detail about install SQL Server Express LocalDB via GUI and command line. You can also review the following steps.
http://www.mssqltips.com/sqlservertip/2694/getting-started-with-sql-server-2012-express-localdb/
If the same error about OS still exists, I recommend you submitting a feedback to Microsoft such issues at
https://connect.microsoft.com/SQLServer/Feedback, Your feedback enables Microsoft to offer the best software and deliver superior services, meanwhile you can learn more about and contribute to the
exciting projects on Microsoft Connect.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Unable to install Sql Server 2008 R2 express on windows 2003
Hi,
I am unable to install sql server express edition with management tools, on windows server 2003. During rules check, it gives an error that minimum os version is not supported.
.net framework requirements have been met.
Is there something that I am missing ? Any pointers would be of immense help
thanks
SaagarHello,
Whats is Service Pack edition of Windows 2003 server.As per prerequisites it requires SP2 for windows Server 2003 I guess your server is not updated to latest SP.Please refer below link for hardware and software requirement
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx#SSE_x64
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Unable to install SQL server 2008 r2 standard edition on windows server 2008 r2 sp1
I am unable to install sql server 2008 r2 standard edition on windows server 2008 r2 sp1.
On the Setup Support Files page, choose Install this step I don't get any other window i.e. nothing happens I waited for 5-10 min. Then I checked the log file.
Final result: Failed: see details below
Exit code (Decimal): -2068053929
Exit facility code: 1212
Exit error code: 87
Exit message: Failed: see details below
Start time: 2014-03-18 14:59:31
End time: 2014-03-18 15:00:25
=== Verbose logging started: 3/19/2014 9:45:47 Build type: SHIP UNICODE 5.00.7601.00 Calling process: E:\SQL Server 2008 R2 Standard\x64\setup100.exe ===
MSI (c) (10:34) [09:45:47:496]: Note: 1: 2203 2: E:\SQL Server 2008 R2 Standard\x64\redist\watson\dw20sharedamd64.msi 3: -2147287038
MSI (c) (10:34) [09:45:47:496]: MsiOpenPackageEx is returning 2.
=== Verbose logging stopped: 3/19/2014 9:45:47 ===
Please help As i am running out of time as i have to upgrade TFS for that first step is to install SQL server.Hello,
The following are a few things you can try:
Copy the media to the local disk drive, unzip it (in case you are installing from an ISO file, and run SQL Server setup from there.
Try to unregister and register the Windows Installer with the following two commands:
msiexec /unregister
msiexec /regserver
Try to use Process Monitor to log the detailed error produced when the installation of dw20sharedamd64.msi fails. You can download Process Monitor from the following link:
http://technet.microsoft.com/en-us/sysinternals/bb896645
Share with us the error captured by Process Monitor.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7
Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
I get the below error
Could not find vsjitdebugger.exe
Blogs say anti-virus is stopping but I dont have one on the system.
Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
Now i could not install both the software.
Can I get some help regarding this?Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li -
Error: "PackageFromTheweb" when install SQL Server 2000 cluster
Hi,
I am trying to setup a WAS 6.40 system. When I am installing SQL Server 2000 on cluster, I got following error: "This program is used internally by PackageFromTheWeb. It should not be executed directly." Our OS is Windows 2003 Enterprise SP2. Search on the internet many have the same problem but seems no answers. We even completed rebuild OS and install again got the same error message. Very frustration! Realizing the installation has NOT even get to SAP part yet, but any of you see this kind error message when you install SQL Server? How do you fix it?
Any helpful anwsers are appreciated and reward points.
Thanks,
Yujun Ran
Edited by: Yujun Ran on Mar 18, 2008 3:53 PMSuhas,
Not sure I understand what you are asking. But to answer your question, No, I did not install any software on my desktop. I am logon to the server remotely to install SQL Server 2000.
Thanks,
Yujun Ran -
JDBC to access SQL server 2000 and Oracle.
hi,
I have the following requirement. I have an oracle database which contain sql data including BLOB and CLOB. Firstly, I should migrate the data to a SQL server 2000 database. That is, i should be able to have two databases, one on oracle and the other on sql server 2000. the two databases should contain the same data, which includes BLOB data. I guess, sql server 2000 does not have a BLOB data type. What is the equivalent data type i can use to save the Oracle's BLOB data in SQL server?? Should it be image type?
After i migrate the data to the sql server 2000 database, i should be able to connect to the two databases, oracle and sql server 2000, using the same JDBC code to retrieve, insert, update and delete the data. What are the drivers that i should use. I guess, the MS JDBC driver does not support BLOB and CLOB. Is there a driver that can support BLOB for sql server 2000 and is also free???!
Kindly help... Thanks.
Arthi.Hi,
I am new to jdbc... so, pls forgive my ignorance...
I shall try to map a BLOB data column in oracle to an IMAGE data column in sql server 2000. I am using oracle jdbc driver and microsoft's jdbc driver for connecting to the databases.
My question is, can i use setBlob() method in the preparedstatement in jdbc code for setting data to the sql server 2000 image column?
rs.getBlob() and preparedstatement.setBlob()code works fine for oralce's BLOB column using oracle's jdbc driver.... Will the same jdbc code work for sql server 2000's image column using microsoft's jdbc driver??
Kindly help.
Arthi. -
SQL Server 2000 and JDBC,Registering cursor as OUT param
hi
I am using JDK1.4,SQL Server 2000 and Microsoft's JDBC driver.
I am stuck in accessing cursors.
The SP i wrote is
USE pubs
IF EXISTS (SELECT name FROM sysobjects
WHERE name = 'spSelectEmployees' and type = 'P')
DROP PROCEDURE spSelectEmployees
GO
CREATE PROCEDURE spSelectEmployees @emp_cursor CURSOR VARYING OUTPUT
AS
SET @emp_cursor = CURSOR
FORWARD_ONLY STATIC FOR
SELECT *
FROM employee
OPEN @emp_cursor
GO
The problem I face is that when i register the output param in java code,what datatype do I specify..code is written below.
calStmt = conn.prepareCall("{CALL pubs.dbo.spSelectEmployees(?)}", ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_READ_ONLY);
calStmt.registerOutParameter(1,Types.?????);-->What goes here???
java.sql.Types does not give any datatype for cursor or object.Any one knows if there is an extended type given by Microsoft Driver??I am using JDK1.4,SQL Server 2000 and Microsoft's JDBC driver. Premably for 2000. Numerous posts here suggests that driver has problems. The jTDS driver would be a better choice.
java.sql.Types does not give any datatype for cursor or object.Any one knows if there is an extended type given by Microsoft Driver??You are correct that it would require a driver specific type. I have no idea what it is.
Why don't you modify the proc to return a result set. -
SQL Server 2000 and 2008 Standard Edition
Hi,
I was wondering if anyone knows if there are any auditing limitations in the standard editions of SQL server 2000 and 2008 R2.
I'm interested to know if there are audit functions for user auditing like creation, deletion and logons
Can't seem to find any information about this.In addition to Shanky notes, please have a look at these article:
DML Trigger Status Alerts
Implementing generic audit trail trigger in sql server
Saeid Hasani [sqldevelop] -
How do SQL server 2000 and Oracle linked?
Hi,
How do SQL server 2000 and Oracle linked?
Thanks in Advance
Baloch.use the like to setup ODBC and datasource
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
and then create link server in sql server after you test conenction with oracle -
Communication Failing with Corrupted Chars . Sql Server 2000 and AS400
Hi Experts,
I am facing this below error after 9 yrs. sql server 2000 and As400 on prod server. while on dev and stage it's running properly. Here username is ABCD, while it's showing BCD
The OLE DB provider "MSDASQL" for linked server "" reported an error. Authentication failed. [SQLSTATE 42000] (Error 7399) Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "xxxxx".
[SQLSTATE 42000] (Error 7303) OLE DB provider "MSDASQL" for linked server "" returned message "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
[SQLSTATE 01000] (Error 7412) OLE DB provider "MSDASQL" for linked server returned message "[IBM][iSeries Access ODBC Driver]Communication link failure. comm rc=8001 - CWBSY0001 -
User BCD on server does not exist, Password length = 8, Prompt Mode = Never, System IP Address = "xxxxx". [SQLSTATE 01000] (Error 7412). The step failed.
Here ABCD user is also disabling/locking the profile on AS400 server.
When we tried on Dev server, linked server through DSN working properly. Last time when it appeared 2 yrs ago, it resolved automatically. but now more than 10 days passed and still Failing.
Please Guide Me.
Regards,
ManishSo this setup has worked for nine years, and all of a sudden stopped working with this error message? Does not look trivial...
What does Here ABCD user is also disabling/locking the profile on AS400 server mean? Is ABCD able to log in directly on the AS400 box?
One possibility is that the user ABCD has been dropped or disabled, and then there is a bug in the ODBC driver where the first character of the username is distorted in the error message. I note that there are two spaces between "User" and "BCD".
The other possibility is that the AS400 is receiving a login attempt from BCD (or something that ends in BCD with an invisible leading character). This sounds very difficult to troubleshoot...
Erland Sommarskog, SQL Server MVP, [email protected] -
SQL Server 2000 and BPEL configuration issues
I am attempting to get SQL Server 2000 to work with BPEL PM Server, and have followed a similar set of instructions as provided in a previously posted document regarding the switch from oracle lite to oracle production. I am following the OC4J route. I've seen a previous posting on this, however, I am elaborating a little more on the configuration details here and the difficulties that I am encountering.
I'm am using the following software:
1) SQL Server 2000 (w/ SP3)
2) SQL Server 2000 JDBC Driver (SP3 latest version)
3) BPEL PM (GA release)
Here's what I've done:
1) setup the database in SQL Server 2000 (named: ORABPEL). then ran the ddl scripts that came with the BPEL installation for sql server. there were two scripts, one for domain and the other for server. the commandlines to run these scripts:
sql -Uuser -Ppassword -ddatabase
-i c:\orabpel\system\database\scripts\domain_sqlserver.ddl
-o c:\orabpel\system\database\scripts\domain_sqlserver.out
2) installed stored procedures for JTA. this is documented in the JDBC driver help file.
3) modified the library paths in application.xml as followed:
<!-- SQL2K JDBC LIBS -->
<library path="C:\Program files\Microsoft SQL Server 2000 Driver for JDBC\lib\msbase.jar"/>
<library path="C:\Program files\Microsoft SQL Server 2000 Driver for JDBC\lib\msutil.jar"/>
<library path="C:\Program files\Microsoft SQL Server 2000 Driver for JDBC\lib\mssqlserver.jar"/>
4) modified the datasources in the data-sources.xml:
- first comment out the oracle lite data-source
- add datasources for mssql 2000:
<data-source class="com.evermind.sql.DriverManagerDataSource"
name="BPELServerDataSource"
location="loc/BPELServerDataSource"
xa-location="BPELServerDataSource"
ejb-location="jdbc/BPELServerDataSource"
connection-driver="com.microsoft.jdbc.sqlserver.SQLServerDriver"
url="jdbc:microsoft:sqlserver://127.0.0.1:1433;SelectMethod=cursor;User=<username>;Password=<password>;DatabaseName=ORABPEL">
</data-source>
<data-source class="com.evermind.sql.DriverManagerDataSource"
name="BPELSamplesDataSource"
location="jdbc/BPELSamplesDataSource"
xa-location="BPELSamplesDataSource"
ejb-location="jdbc/BPELSamplesDataSource"
connection-driver="com.microsoft.jdbc.sqlserver.SQLServerDriver"
url="jdbc:microsoft:sqlserver://127.0.0.1:1433;SelectMethod=cursor;User=<username>;Password=<password>;DatabaseName=ORABPEL">
</data-source>
<data-source class="com.evermind.sql.DriverManagerDataSource"
name="AdminConsoleDateSource"
location="jdbc/AdminConsoleDateSource"
xa-location="AdminConsoleDateSource"
ejb-location="jdbc/AdminConsoleDateSource"
connection-driver="com.microsoft.jdbc.sqlserver.SQLServerDriver"
url="jdbc:microsoft:sqlserver://127.0.0.1:1433;SelectMethod=cursor;User=<username>;Password=<password>;DatabaseName=ORABPEL">
</data-source>
after starting the BPEL PM Server, I got the following set of error messages:
Loading processes for BPEL domain "default" ...
<2005-06-02 09:36:44,482> <ERROR> <default.collaxa.cube.sensor> <PCException::<i
nit>> Sensors not supported.
<2005-06-02 09:36:44,482> <ERROR> <default.collaxa.cube.sensor> <PCException::<i
nit>> Sensors are not supported on this database platform.
<2005-06-02 09:36:44,482> <ERROR> <default.collaxa.cube.sensor> <PCException::<i
nit>> If sensor functionality is required, please switch to a supported platform
After this I went and changed the class tags to: com.microsoft.jdbcx.sqlserver.SQLServerDataSource
restarted the server and got the following:
<2005-06-02 09:22:52,531> <INFO> <collaxa> <ConnectionFactoryImpl::init> Initial
ized connection factory jdbc/BPELServerDataSource
05/06/02 09:23:06 ORABPEL-04077
Cannot fetch a datasource connection.
The process domain was unable to establish a connection with the datasource with
the connection URL "loc/BPELServerDataSource". The exception reported is: Cann
ot fetch a datasource connection.
The process domain was unable to establish a connection with the datasource with
the connection URL "loc/BPELServerDataSource". The exception reported is: [Mic
rosoft][SQLServer 2000 Driver for JDBC]Unable to connect. DataSource property s
erverName must be specified.
Please check that the machine hosting the datasource is physically connected to
the network. Otherwise, check that the datasource connection parameters (user/p
assword) is currently valid.
Please check that the machine hosting the datasource is physically connected to
the network. Otherwise, check that the datasource connection parameters (user/p
assword) is currently valid.Hi,
I just saw your post message about configuring SQL server 2000 with Oracle BPLE. Have you configured it successfully or still encountered any problem.
I am new to Oracle BPEL. Want to know if Oracle BPEL can use MSFT SQL server 2000 as the repository entirely, therefore, we don't need Oracle (or Oracle light database).
Will really appreciate if you can share information and experience to configure SQL 2000 with Oracle BPEL.
Thank you so much in advance.
Leey -
Error in installing SQL SErver 2000 for SAp
When i try to install Ms SQL server 2000 for SAP it is giving me a message , "unable to validate product key"
Pls let me know how to solve itDear,
When u install original sql server, might be it should not ask for product key. In sql source there is one vbs script, just click on that vbs script and ur installation of sql server is going to start. This is upto my knowledge.
Thanking You.
Charanjit
Maybe you are looking for
-
Oracle 9i Database installation
Database : Oracle 9i (9.2.0.1.0) Linux : Redhat Enterprise Linux 4 (WS) Kernel : 2.6.9-5.EL Java : jre 1.5.0_08, jdk 1.5.0_07 With above mentioned setup, while I try to install Oracle, I faced following error : Unable to load nativelibrary : /tmp/Ora
-
All System Centre Stack on 1 Instance of SQL Server
Apologies : there does not appear to be a forum where this fits I am in the process of doing a design for a client who wants the whole system centre stack installed but on one instance of a SQL 2012 Cluster. I can find SQL Server Requirements for Sys
-
Running GB 1.1 on Intel-based cpu
I'd like to know if there will be any problem running GB 1.1 on an Intel-based Mac. I need to do this for my school music classroom, as all the computers there use that version on eMacs. All help will be appreciated.
-
Scrollbars/Viewports etc.
Hello, I am new to Swing, well, sort of, but I have a problem that I'm not really looking for the answer to, more just in case there's some sort of weird bug that I'm not aware of. I don't want to be banging my head against a brick wall! I'm trying t
-
Am I missing something? Is there an: ORDSYS.ORDDocument ?? ORDSYS.ORDDoc ?? ORDSYS.ORDFile ?? I would like to allow users to upload external documents to an application built upon JSP, EJB's and JDBC.. but I have yet to find any 1: documentation or 2