"Unable to install the GEAR driver set." in Vista Premium solution!

If you're getting the "Unable to install the GEAR driver set." error, go into regedit, navigate to HKEYLOCALMACHINESYSTEMCurrentControlSetServicesGearAspiWDM and delete the DeleteFlag key. Run the iTunes upgrade/setup package and iTunes should install correctly.
If you get an error about explorer.exe being open, use the Tasks section of Task Manager to stop the explorer.exe application.

Is this 64 or 32 bit Vista?

Similar Messages

Installing 7.2. Says "Unable to install the gear driver set at this time...

Hello, Im trying to Install ITunes 7.2, and I get this error:
"Unable to install the gear driver set at this time. The GEARAspiWDM service use by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run itunes again"
I am installing ITunes for the very first time on my comp, cuz I just received a new 2GB Nano.
I've tried rebooting,tried uninstalling my Quicktime and removing it from my comp, uninstalled and cleaned any remnants of previous ITunes using the windows cleaner, disabling both my mcafee and pccillin, and it still comes up with the error.
I'd be indebted to any suggestions or resolutions!
Thank you!
E Machines T6216 Windows XP

Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP

"Unable to install the GEAR driver set at this time...."

Hello, I have been having trouble installing iTunes. I uninstalled it because I wasn't able to put songs on my iPod. And when I tried to reinstall it, I got this error:
"Unable to install the GEAR driver set at this time. The GEARAspiWDM service use by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run iTunes again"
First off, I don't even have iTunes installed any more. Second, I don't know what the heck the GEAR driver is.
Please help!
--Jon

When you get this message, you may need to manually remove your gear drivers, see the following post which links to full instructiosn:
http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452
It requires editing the registry so be careful.

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

All,
A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
So happy to be done w/this one!
Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
TC

When trying to install itunes i get a message saying it can't install the gear driver. Anyone have the same problem?

Trying to install iTunes but keep getting the message, " Can't install GEAR driver" Any help?

Error referring to aam protocol when you click download button | CC

Unable to install GEAR driver set

When install intunes on my laptop then I got the error report as below:
"Unable to install the GEAR driver set at this time. The GEARAspiWDM service used by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run itunes again."
ALso try to search solution from several forum but this is highlighted with CAUTION because it change registry on system:
http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452
Anyone have other solution to solve this? please help.
Thanks

If you're worried about messing up GEAR, you might try reinstalling it:
http://www.gearsoftware.com/rss/GEAR-drivers-feed.php
Presuming that doesn't help, go ahead and remove it per that article you found, but just backup your registry first, just to be safe:
http://support.microsoft.com/kb/322756

Gear driver set

I am having problems with this gear driver set unable to install it started doing this when I tried to upgrade to 7.6 what is the problem with this now I can't even get my itune back on my lap top. please help i have a party coming up soon and i need my music.

I am having problems with this gear driver set unable to install
Are you getting the following message?
+Unable to install the GEAR driver set at this time. The GEARAspiWDM used by the GEAR driver set is scheduled to be deleted during the next system reboot. Please reboot the system and run iTunes again.+
With that one, try the solution described in the following GEARSoft support forum thread:
http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452

Satellite P750: Unable to install Bluetooth Stack driver on Windows 7 (x64)

Hello.
I own a *Satellite P750-02T* (Part no. *PSAY3A-02T001*).
In the order what I did:
1) I formatted its HDD and reinstalled OS to *Windows 7 x64 Ultimate SP1*.
Then I downloaded *ONLY BIOS and the drivers* from [its Downloads page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] :
2) I updated its BIOS to *v1.90* (the laptop came with v1.80)
3) I installed all the drivers:
- both LAN and WiFi
- Intel Chipset (latest available)
- all video drivers (Intel HD Graphics, NVIDIA Graphics, and Intel HDMI)
- Card Reader
- Realtek HD Audio (latest)
- Synaptics Touchpad
- USB3.0
- IR
- TV-Tuner
However, I'm *unable to install the Bluetooth driver (v8.00.06(T)* )...
When I run setup from the [above-mentioned page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it partially detects *'Bluetooth USB Controller-10 from TOSHIBA'* (USB\VID_0930&PID_0215&REV_001)
and then installation simply freezes displaying +'Installing the Bluetooth Driver. Please wait+.' and stays like that forever...
I also tried downloading a driver from [another location|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for TOSHIBA notebooks - v8.00.02(T):
and followed installation instructions displayed under 'Details'
but there was the same outcome - the setup simply freezes...
Installing Hotfix (*KB978258*) recommended there didn't work either - the message '+The update is not applicable to your computer+' pops up.
And I understand why - this Hotfix is [already included|http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] into Service Pack 1 for MS Windows 7.
I spent hours searching on the Internet for a solution. Although there were some similar cases none of the recommendations actually worked. I tried installing:
- WiFi driver before installing Bluetooth (someone suggested that those two are the parts of the same card);
- resuming installation in Safe Mode;
- *Toshiba Value Added Package* hoping those tools somehow will kick in.
Nothing worked...
It's interesting that when for the sake of experiment I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything run smoothly!
*Using Bluetooth connection on this laptop is very crucial for me.*
I hope I shall not have to return this wonderful notebook as I know TOSHIBA is one of the best manufactures and am sure there is a solution to this problem.
Thank you very much.
Evgeny.
Message was edited by: CVD
clarified about using another generic Bluetooth adapter with non-TOSHIBA driver

For FN functionality you must install Toshba Value added package. Toshiba flash cards utility is part of this package.
I dont know if P750 has WLAN switch but before you start BT installation be sure WLAN LED is ON.
BTW here is installation order for Win7 on Satellite P750 (European but the same order must be for your Australian model):
Win7 64bit SP1
PatchFiles V1.0
PlayReady PC Runtime V1.3
Sun Java2 Runtime Environment 1.6.0_20
TOSHIBA Assist 4.02.02
TOSHIBA Bulletin Board 2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Chipset SW Installation Utility 9.2.0.1015
Intel Management Engine Interface V7.0.4.1197
Intel Display Driver 8.15.10.2353
NVIDIA Display Driver 267.44
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Supervisor Password Utility 1.63.51.2C
TOSHIBA HW Setup Utility 1.63.1.34C
TOSHIBA Flash Cards Support Utility 1.63.0.12
TOSHIBA Value Added Package 1.5.4.64
NVIDIA HD Audio Driver 1.1.13.1
Realtek Audio Driver 6.0.1.6305
TOSHIBA Wireless LAN Indicator 1.0.3
Intel Wireless LAN Driver
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA HDD Protection 2.2.1.13
Atheros Bluetooth Filter Driver Package v1.0.4
Bluetooth Stack for Windows by Toshiba v8.00.06(T)
Realtek LAN Driver 7.038.0113.2011
Jmicron Card Reader 1.00.57.02
ENE CIR Driver V3.2
YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
USB3.0 Driver 2.0.34.0
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition 3.1.9
TOSHIBA eco Utility 1.2.24.64
Intel Proset 14.0.2.0.1.s64_wCAT
TOSHIBA HDD/SSD Alert 3.1.64.8
TOSHIBA Service Station 2.1.52
HDMI Control Manager 2.0.0.7.64
TOSHIBA Remote Control Manager 3.0.6.1
TOSHIBA PC Health Monitor 1.7.5.64
ConfigFree
TOSHIBA Web Camera Application
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
Intel Wireless Display 2.0.29T2
PatchFiles PCIIDEREG-1.2
PatchFiles
I hope this will help you a bit.

T510 unable to install the Nvidia NVS3100 under XP

Hi for some reason we had to install windows XP instead of windows 7 on a T510 with the NVS3100 video card;
I'm unable to install the Nvidia driver 6md136ww.exe! The program gives me an error cannot find the driver for your hardware.
I really need help.
ref:
PCI\VEN_10DE&DEV_0A6C&SUBSYS_21D817AA&REV_A2\4&26E957CF&0&0008
T510
4313-cto
Solved!
Go to Solution.

Hi and welcome to the forum!
Do you have Nvidia Optimus model or just plain Nvidia with switchable graphics? See this support page, verify and then let us know.
Keep us posted.
Edit: Also, did you change switchable to discrete in the BIOS before installing the driver? I don't believe XP supports switchable graphics, further is your XP updated to SP3? This is a requirement.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
  Lenovo Deutsche Community     Lenovo Comunidad en Español
Visit my YouTube Channel

Unable to install officejet 6100 driver on windows 7

Hi I am unable to install the HP6100 Officejet All in one driver for WIndows 7 enterprise. I keep receiving an error indicating that MSVCR90.dll is missing, but the file is there. Any help would be appreciated.

Hello jm092749.
Welcome to the HP Forums.
I understand you are seeing a "MSVCR90.dll is missing" error when trying to install your printer. I will do my best to assist you with this.
This issue can be hardware or software-related. I located a complete guide to troubleshoot this issue. If you follow the instructions in order, you should be able to resolve the issue: How To Fix Msvcr90.dll Not Found or Missing Errors
I believe the issue will be resolved after following these steps. If not, the computer is facing a hardware issue, and will likely need to be repaired. Either way, please post your results. If this was the information you are looking for, please mark this post with an Accepted Solution and Kudos. Doing this will allow others to locate this information easily.
Thank you for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw in windows 7 64 bit

HI
am unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw Drivers in windows 7 64 bit , after runing the setup ,the printer will finshing the installation process and and it will show that the HP Scan and HP fax failed.

Hi @Chembo ,
I see you're experiencing issues installing the printer software. I will do my best to assist you with this issue.
I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
Restart the computer.
Disconnect the USB cable from the printer.
Run the uninstall from the CD.
Go start, computer, right click on the CD for the printer, left click open in a new window, double click on uninstall.
Make sure that the print spooler service is running.
Right-click Print Spooler, and then click Properties.
If the Startup type is set to Manual or Disabled, click the drop-down list, click Automatic, and then click Apply.
Under Service status, click Stop and then Start, and then click OK.
Run the installation again and don't connect the cable until prompted.
Test the printer.
Then you will have to go back and enable the Startup programs, Microsoft Services and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to install a software driver for Canon film scanner on mac OSX 10.6

I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Unable to install the Novell File Upload extension to upload directories

Using Firefox 9.0.1 on Windows 7 I'm unable to install the Novell File
Upload extension to upload directories.
As per the pop-up help page, I've added
extensions.install.requireBuiltInCerts in about:config and set it to
false but that has made no difference, even after restarting the browser.
I've also tried this with Firefox 9.0.1 on Mac OS X Snow Leopard
(10.6.8) - unsupported I know - with the same result.
Do I really have to use Internet Explorer? Urgh!
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

On 19/01/2012 18:11, craig wilson wrote:
> You should trust the ZCM CA and the error will go away.
> It's not expected to get that error.
> Managed Devices especially will have loads of issues if the ZCM CA is
> not trusted.
So, with Firefox, first hitting http://<server>/zenworks/ after install
displays
--begin--
This Connection is Untrusted
You have asked Firefox to connect securely to <server>, but we can't
confirm that your connection is secure.
Normally, when you try to connect securely, sites will present trusted
identification to prove that you are going to the right place. However,
this site's identity can't be verified.
What Should I Do?
If you usually connect to this site without problems, this error could
mean that someone is trying to impersonate the site, and you shouldn't
continue.
[Get me out of here!]
> Technical Details
> I Understand the Risks
---end---
so I click "I Understand the Risks", [Add Exception...] then [Confirm
Security Exception] at which point http://<server>/zenworks/ correctly
displays and I can log in. Checking Tools | Options | [View
Certificates] shows an (Unknown) server certificate for <server> with a
Permanent lifetime.
Is that what you mean by trusting the ZCM CA?
Perhaps this is why Firefox 9.x is not a supported browser though I
thought that was more to do with Mozilla treating major version numbers
as minor ones? Gee if only Firefox hadn't automatically upgraded itself
from 8.x to 9.x!
Thanks.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Why can't I install the RAID driver?

I'm a newbie with a newly built system, I originally wanted to set up a RAID0 with my two drives but I ran into a problem using the instructions in the user's guide. No matter how many times I pressed F6 to install the RAID driver, it just won't load and pressing CTRL+I does nothing. Eventually I gave up and just install the drives as IDE drives and installed the OS on the first drive. After installing the OS, I tried to install the IAA RAID Edition but it keeps saying that I don't have the right I/O Controller installed even though I know I do because I checked it using Intel's chipid program. I'm running out of ideas, can anyone help me?

In Bios>>Integrated Peripherals>>On-Chip IDE Config:
You must have 'Configure SATA As Raid" set to "yes"
Then if you have the drives attached to Serial1&2 properly(data and power), you'll be able to use control-I to enter the Raid Utility and configure the Raid.
Then load the XP setup CD and hit F6 to install the Raid drivers and continue the WinXP installation.
The Intel IAA Raid Edition will Not install if it detects the Bios setting mentioned above is not enabled OR if there are no Raid configured drives.

"Unable to install the GEAR driver set." in Vista Premium solution!

Similar Messages

Maybe you are looking for