Unable to install the Netbeans 4.1 Mobility Pack

Hi,
I have Netbeans 4.1 installed on my machine and I have just installed Java Studio Enterprise 8 so that I can compare them. I have been trying to install the Netbeans 4.1 Mobility Pack into the Java Studio Enterprise 8 IDE as described on the website but it will not install. Should I uninstall Netbeans 4.1 first?

The installer included with JSE CD should work fine; also the current installer hosted on netbeans.org should work fine too.
But there were some earlier installers that were specifically looking for 'nb41' directory (which exists in netbeans41 but not in jse).
If the installer is looking for this directory, one workaround is to create an empty directory named 'nb41' in jse8 install directory ( parallel to ide5, platform5 etc). The installer merely checks for the existence of this directory and the contents do not matter; installation should proceed without issues if this dir exists.
Ref: http://www.netbeans.org/issues/show_bug.cgi?id=60850

Similar Messages

TS3212 I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message "Service 'Apple Mobile Device' failed to start, verify that you have sufficient Privileges to start

I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backups

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

Unable to install the AIR on Samsung Galaxy Fit

Hi,
I am unable to install the Adobe Air on Samsung Galaxy Fit GT-S5670.
I have adroid Version 2.2.1.
Whenever i am trying to load an appilication from Adobe flex ver 4.5,I am getting error called
Error occurred while installing the application:
pkg: /data/local/tmp/Runtime.apk
Failure [INSTALL_FAILED_INVALID_APK]
1857 KB/s (6108444 bytes in 3.212s)
Command is given below
<?xml version="1.0" encoding="utf-8"?>
<s:ViewNavigatorApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark" firstView="views.saaHomeView">
<fx:Declarations>

</fx:Declarations>
</s:ViewNavigatorApplication>
But the same is working on Samsung glaxy tab or HTC desire.
can any one please help me
thanks
Suren

Could be possible that Samsung Galaxy Fit Processor doesn't match with the system requirements of AIR. It should be ARMv7
http://www.adobe.com/products/air/systemreqs/MOBILE SYSTEM REQUIREMENTS
Android devices
VGA: Dedicated Cortex A8 (ARMv7) 550MHz App Processor with Neon for A8 only; Hardware Vector FPU
WVGA: Dedicated Cortex A8 (ARMv7) 800MHz App Processor; Hardware Vector FPU
Google Android™ 2.2 or later
-Pahup

Cisco Network Setup Assistant Unable to install the certificate on Android KitKat

Greetings,
I'm having issues with deploying the CA. Although the Cisco app fails, the user cert (but no CA) appears to install and is accessible during wifi setup. I am running the latest version of Cisco Network Setup Assistant 1.2.42. The phone is running Android KitKat 4.4.4, not rooted, running stock T-Mobile rom. I'm able to authenticate with the guest side, and get as far as Installing Certificates... Reference the screen shots attached.
Error message cisco Network Setup Assistant: "Unable to install the certificate. Exit the application and run it again to continue to the installation."
I have ran the application several times, it keeps returning to this same message.
After failure of the Cisco app, I noticed there is a certificate manager with CA cert and key, and than subsequently one new key continues to loop after until I cancel (also in screenshots).
I have tried decryption, removing all security, and clearing credentials, yet the problem persists. Any help is appreciated.

Greetings,
I'm having issues with deploying the CA. Although the Cisco app fails, the user cert (but no CA) appears to install and is accessible during wifi setup. I am running the latest version of Cisco Network Setup Assistant 1.2.42. The phone is running Android KitKat 4.4.4, not rooted, running stock T-Mobile rom. I'm able to authenticate with the guest side, and get as far as Installing Certificates... Reference the screen shots attached.
Error message cisco Network Setup Assistant: "Unable to install the certificate. Exit the application and run it again to continue to the installation."
I have ran the application several times, it keeps returning to this same message.
After failure of the Cisco app, I noticed there is a certificate manager with CA cert and key, and than subsequently one new key continues to loop after until I cancel (also in screenshots).
I have tried decryption, removing all security, and clearing credentials, yet the problem persists. Any help is appreciated.

HT4623 While updating ios6 through software update option, i am getting the error"unable to install the update an error occured installing IOS6"

While updating ios6 through software update option, i am getting the error"unable to install the update an error occured installing IOS6"

I am getting this message also.... mine cant update too...

Unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw in windows 7 64 bit

HI
am unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw Drivers in windows 7 64 bit , after runing the setup ,the printer will finshing the installation process and and it will show that the HP Scan and HP fax failed.

Hi @Chembo ,
I see you're experiencing issues installing the printer software. I will do my best to assist you with this issue.
I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
Restart the computer.
Disconnect the USB cable from the printer.
Run the uninstall from the CD.
Go start, computer, right click on the CD for the printer, left click open in a new window, double click on uninstall.
Make sure that the print spooler service is running.
Right-click Print Spooler, and then click Properties.
If the Startup type is set to Manual or Disabled, click the drop-down list, click Automatic, and then click Apply.
Under Service status, click Stop and then Start, and then click OK.
Run the installation again and don't connect the cable until prompted.
Test the printer.
Then you will have to go back and enable the Startup programs, Microsoft Services and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
At that point, a "Close" button is pulsating blue at the bottom of the window.
Sorry for the tedious detail. Anything revealing there?
Thanks!

Unable to install the latest version of Adobe Muse via Adobe Application Manager

I´m a user of Creative Suite applications and all of them have been updated successfully with the exception of the latest version of Adobe Muse.
I´m unable to install it. I get error DW 050
I´m using Windows 7 64 bit.
All previous versions of Adobe Muse have been installed OK.
Following a forum discussion I could read, I uninstalled the previous version, but the installation fails again.
Does any body know how to solve this issue?

Dear Sachin:
Thank you for your help, however I have to get back to you to inform that after downloading the new package based on the link that you´ve provided, I´m still unable to execute the application. I get the message: “block by the administrator” and also another message: “the editor of this program is unknown and unsafe”. Please note that all other programs from Adobe´s Creative Cloud have been downloaded and installed with success. All Adobe Creative programs have been installed on my computer several months ago and all are working fine so far. This morning I installed an update for Photoshop without any problem. It seems that the problem persists only with Muse. I have to highlight that I´m the administrator of my PC and therefore all applications are currently being executed as administrator. I have never had the intention to block any program, including obviously Adobe´s Creative Suite programs.
Could you please let me know how to splve this problem?
Michael.
De: Sachin Hasija [email protected]
Enviado el: lunes, 28 de enero de 2013 18:57
Para: retonxxy
Asunto: Unable to install the latest version of Adobe Muse via Adobe Application Manager
Re: Unable to install the latest version of Adobe Muse via Adobe Application Manager
created by Sachin Hasija <http://forums.adobe.com/people/Sachin+Hasija> in Help with using Adobe Muse - View the full discussion <http://forums.adobe.com/message/5028441#5028441

I'm unable to install the Mac os x 10.7.3 update. I get an error message each time my macbook tries to install the downloaded updates. Can anyone help me?

Each time my macbook restarts and tries to install the downloaded software updates, I get an error message telling me that there might have been an error during the download process of the updates and that he's unable to install the updates. What can I do?

What are you trying to download? If you are referring to the recent security update, just ignore the error and select the option to open the installer. It's fine.

I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?

I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?

U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

I am unable to install the creative cloud update - error 43 comes up at around 77%

I am unable to install the creative cloud update - error 43 comes up at around 77%. I'm a relatively new user.

WIthout proper system info and the detailed error report nobody can say much. Most likely you run out of disk space.
Mylenium

Unable to install the Novell File Upload extension to upload directories

Using Firefox 9.0.1 on Windows 7 I'm unable to install the Novell File
Upload extension to upload directories.
As per the pop-up help page, I've added
extensions.install.requireBuiltInCerts in about:config and set it to
false but that has made no difference, even after restarting the browser.
I've also tried this with Firefox 9.0.1 on Mac OS X Snow Leopard
(10.6.8) - unsupported I know - with the same result.
Do I really have to use Internet Explorer? Urgh!
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

On 19/01/2012 18:11, craig wilson wrote:
> You should trust the ZCM CA and the error will go away.
> It's not expected to get that error.
> Managed Devices especially will have loads of issues if the ZCM CA is
> not trusted.
So, with Firefox, first hitting http://<server>/zenworks/ after install
displays
--begin--
This Connection is Untrusted
You have asked Firefox to connect securely to <server>, but we can't
confirm that your connection is secure.
Normally, when you try to connect securely, sites will present trusted
identification to prove that you are going to the right place. However,
this site's identity can't be verified.
What Should I Do?
If you usually connect to this site without problems, this error could
mean that someone is trying to impersonate the site, and you shouldn't
continue.
[Get me out of here!]
> Technical Details
> I Understand the Risks
---end---
so I click "I Understand the Risks", [Add Exception...] then [Confirm
Security Exception] at which point http://<server>/zenworks/ correctly
displays and I can log in. Checking Tools | Options | [View
Certificates] shows an (Unknown) server certificate for <server> with a
Permanent lifetime.
Is that what you mean by trusting the ZCM CA?
Perhaps this is why Firefox 9.x is not a supported browser though I
thought that was more to do with Mozilla treating major version numbers
as minor ones? Gee if only Firefox hadn't automatically upgraded itself
from 8.x to 9.x!
Thanks.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Unable to install the updated version of iTunes

Hi All.
I am unable to install the updated version i.e. 10.7 iTunes. I have downloaded it and while installing process it moves until the last and rolls it back.
I have uninstalled itunes and tried again. Could not downloaded. Sowhow I have donloaded the version 10.1 which is no more compatible for my iPhone 4S with iOs 6.
I have read through many threads on the same topic but did not help. Please help here with any suitable idea.
Thanks,
Shan

"There is a probelem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your suppor personnel or package vendor."
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

How to install the Netbeans?

Hello...
The present is so that they help me with the installation of the Netbeans, my problem is the following one:
I want to program in Java with all that offers me the J2EE platform, but when I go to will install the Netbeans it requests me the Virtual Machine (JVM) and it requests me SDK (JDK), but the J2EE include the JDK, therefore my problem is that I want to know like I can install the Netbeans if to have to install the JDK and in that way to save me spaces in the Disk.
My other problem is that the Netbeans includes the Tomcat, but the Tomcat that includes the alone Netbeans it can be manipulated by the Netbeans (that is to say to run and to turn off the Tomcat; and it is not even necessary to keep the files since in the webapps Folder, the Netbeans It makes all that for us), I find that very well, because that makes that the Netbeans is a program that it facilitates the programming in Java, but if suddenly I want to make a program in which I have to make everything, that is to say that myself is the one that the Tomcat manipulates and not the Netbeans. In other words my problem it is that if I want to manipulate the Tomcat directly, then I have to install it apart from the Netbeans, although the Netbeans includes it and to use unnecessary space in the Disk?
I hope you give me an answer.

It would be helpful to know which version of Java SE you are using, what NetBeans modules are you attemping to install, and any pertinent error messages that arise when you try to install the modules. As Jin_B pointed out, check the system/ide.log file in your .jstudio directory for possible error messages.

Unable to Install the update in my JDeveloper 10.3.1

Please help me what is the exact problem as i am unable to install the update in my JDeveloper

Can you be more specific about your problem? What did you try to do? what problems did you encounter?

Unable to install the Netbeans 4.1 Mobility Pack

Similar Messages

Maybe you are looking for