Unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw in windows 7 64 bit

HI 
am unable to install   the scanner on the  HP LaserJet Pro 200 color MFP M276nw Drivers in windows 7 64 bit  , after runing the setup ,the printer will finshing the installation process and and it will show that the HP Scan and HP fax failed. 

Hi @Chembo ,
I see you're experiencing issues installing the printer software. I will do my best to assist you with this issue.
I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
Restart the computer.
Disconnect the USB cable from the printer.
Run the uninstall from the CD.
Go start, computer, right click on the CD for the printer, left click open in a new window, double click on uninstall.
Make sure that the print spooler service is running.
Right-click Print Spooler, and then click Properties.
If the Startup type is set to Manual or Disabled, click the drop-down list, click Automatic, and then click Apply.
Under Service status, click Stop and then Start, and then click OK.
Run the installation again and don't connect the cable until prompted.
Test the printer.
Then you will have to go back and enable the Startup programs, Microsoft Services and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

  • Identifying the scan file for the Laserjet Pro 200 color MFP M276nw on a MacBookPro

    In order to scan to a file on my Laserjet Pro 200 Color MFP M276nw, I need to register a file on my MacBookPro that the scan file can be sent.  The Mac is using Mac OS 10.10 which is claimed to be supported by HP.  But, I am unable to provide the registration information so that the scan file can be sent to the Mac.  Can someone help me with this problem?

    Hi @NeilPayze ,
    I see that you are having issues setting up the scan file. I would like to help you out today.
    If you are trying to setup a scan to a network folder, please follow these steps:
    Create a folder on the desktop.
    Hold down the control button and click on the folder you just created and select Get Info.
    Check Share folder.
    Under Sharing & Permissions select Read & Write.
    Close that window.
    Go to the Apple, System Preferences, Sharing.
    Check File Sharing, select the folder created, then select Read & Write.
    Click on options.
    Check Share files and folders using SMB.
    Check Share files and folders using AFP.
    Below check Account name.
    Then click on Done.
    On the same windows, with File Sharing highlighted, to the right of that under File Sharing: ON, write down the
    IP address.
    Then close that window.
    Open the Embedded Web Server for the printer.
    Click on the Scan tab.
    Click on Network Folder Setup.
    Delete any old entries.
    Then click on New.
    Display Name: Type in any display name.
    Network Path: \\computer's IP\folder name
    Example: \\192.168.22.104\scan
    Username:Computers User name.
    Password: Computers Password.
    Then click on Save and Test at the bottom right corner.
    Please let me know the results.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP LaserJet Pro 200 color MFP M276nw. The fax forwarding feature no longer will forward a fax.

    I am using the HP LaserJet Pro 200 color MFP M276nw.  Is it possible to forward the fax as a email instead of printing it out?  The current fax forwarding feature only supports forwarding to another fax number but not email.  If fax forwarding to email is not support, is there any other solution?
    Albert

    Hi @Albert1024 ,  I understand that you aren't able to forward the faxes. I can help you today.
    You can only forward that faxes from the printer to the fax number.
    Check to make sure the Fax Forwarding didn't get turned off and it is still showing the correct fax number.
    1.  From the Home screen, touch the Fax button.
    2. Touch the Fax Menu button.
    3. Touch the Receive Options button.
    4. Touch the Forward Fax button, and touch the On button.
    5. Use the keypad to enter the fax-forwarding number, and then touch the OK button.
    Turn off the Private Receive.
    1.  From the Home screen, touch the Setup button.
    2. Touch the Fax Setup menu.
    3. Touch the Advanced Setup menu.
    4. Scroll to and touch the Private Receive button, and then touch the Off button.
    Clear out the saved faxes, to make sure this isn't causing any issues.
    Go to Setup on the printer, Services, Fax Service and select Clear Saved Faxes.
    Update the printer's firmware. HP LaserJet Pro 200 color MFP M276nw Drivers.
    If you are still having issues, we can try a full reset on the printer.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • LaserJet Pro 200 color MFP M276nw/ a code 79 service error turn off then on, on screen the product

    I have an HP LaserJet Pro 200 color MFP M276nw. I keep getting a code 79 service error turn off then on, on screen the product

    I have same problem - this doesn't help. Did you did something that worked?

  • HP LaserJet Pro 200 Color MFP M276nw: cannot install on Windows XP Profession​al 64-bit

    Hi all,
    I am trying to install (via USB) the printing driver for my HP LaserJet Pro 200 Color MFP M276nw printer, but my operating system is Windows XP Professional 64-bit, Service Pack 2. The installer stops with an error saying that the system is not supported. Are there any basic drivers available to fix this problem, or do I necessarily need to upgrade my OS?
    Thank you,
    Alessio

    XP 64-bit is not supported. (see system requirements)
    Now is a good time to consider a O/S upgrade because of the end of life come April/2014 for Windows XP.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • [LaserJet Pro 200 color MFP M276nw] only vertical lines when scanning, scanner broken?

    Hi all! I have a problem with the scanner in my HP all in one. If I scan (using the printer function or apples ImageCapture: same result) the output is just a lot of vertical stripes (in colors when in color mode). Not a trace of the image I try to scan. The lines are there even if i scan an empty white page. I see the stripes both when doing a preview scan and an actual scan. The problems are very similar regardless of if I use the flatbed or the feeder scanner (they are separate scanner hardware, yes?). I have updated to the latest software for the printer/scanner and I am connecting over bonjour via wireless. I am on Os X 10.9.1. Anybody having similar problems or is my scanner just plain broken? Thanks in advance!Jon

    , , I understand that both of you are seeing vertical lines when scanning from your Laserjet M276nw. First, make sure the printer is plugged directly into a wall outlet and not a surge protector. Now, so I know where to begin I'd need to know the following:If you are seeing the vertical lines when you copy as well as scan?Are you seeing the vertical lines when you copy from the flatbed? The document feeder? both?If you are seeing the lines from both the flatbed and the feeder are they in the same place?Once I know this I'll be better able to assist you.

  • Unable to Add Printer (HP LaserJet Pro 200 color MFP m276nw) as a New Device to HP Connected Account

    (A)  When I click "Print Information Sheet" on the HP Web Services tab/ "Web Service Setup" to obtain my printer's email address to use in the claim code box...NOTHING HAPPENS.  No claim code, No email address
    (B) When I click "Print Information Sheet" on the HP Web Services tab/ "HP ePrint" to obtain my printer's email address to use in the claim code box, I get the following error message:
    Connection error.  Check Internet connection
    [email protected]
    If I try to enter the xxxxxx before the @ sign in the claim code box I get "Unexpected Error"
    (C) If I use the printer's email address obtained from the Printer's Configuration Report and enter the xxxxxx before the @ sign in the claim code box I get "Unexpected Error"
    What do I need to do to correct this?

    Seems that HP is not supporting your printer, it is written on the specs that it supports but in fact its not the case!!!
    Check on the following website if your printer is available
    http://support.hp.com/hr-en/document/c02814760

  • LaserJet Pro 200 color MFP M276nw cant install

    while it gets ready for installation setup to appear, dont send or send error will appear but installation setup loading doesnt stop, after i pass the first page of the setup (accepting T&C) it says fatal error occrured preventing product use. :/

    Hi Flaming,
    Thanks for providing the screen shot.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    How is the printer connected? (USB/Ethernet/Wireless)
    Did you get this error before connecting the USB cable or after connecting the cable? (if using a USB cable)
    What did the printer entry show in the device manager?
    Were you not able to update the printer driver from the device manager?
    If you are getting that error before the connection type window, then something on the computer is stopping the installation. Did you do the msconfig and turn off the Antivirus software before installing the printer again?
    Please let me know what you have tried, so I can assist you better.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP LaserJet Pro 200 Color MFP M276n issue with the software

    Dear Members,
    When i'm trying to install the drivers for the printer HP LaserJet Pro 200 Color MFP M276n, on Windows Xp the issue is specific on windows xp only i tried on two machines its the same and its fine when i try to intall on windows 7. 
    Error Message:
    A problem occured while preparing to install software to your system please restart your computer, and run this installer agian. 
    Please assist me for the above issue and thanks.
    Regards
    mbsiddiqui

    Hi mbsiddiqui,
    When a printer is connected by USB,  the computer recognizes it and it will show up in the device manager, if it didn't fully install it will still be listed in the device manager and will not find it again when the printer is reconnected. We have to remove the old entry first.
    Leave the printer connected by the USB cable.
    Check the device manager to see if the printer is listed.
    Go to start, right click my computer, left click properties, click on the hardware tab, then device manager.
    Look for the printer entry, it might be listed as other devices, unknown device, delete the entry by right clicking it and select uninstall, it might show up under universal serial bus controllers as USB printing support, if USB composite device is listed then also delete it,  delete the entry by right clicking it and select uninstall.
    Since the software is already installed for the Ethernet connection, from device manager, click on Action and select scan for new hardware.
    If it doesn't find the printer then it might have a ghost key in the registry causing the printer not to be detected again.
    Let me know the results.
    How is the printer listed?
    Were you able to find new hardware?
    What is the printer entry showing now in the device manager?
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Scanner icon lost HP LaserJet Pro 100 color MFP M177fw

    HP Model:  HP LaserJet Pro 100 color MFP M177fw
    After "updating" drivers on my IMac my Scanner disappeared and I have not been able to Scan for over a month.  I just started a new business and this is debilitating!  Can anyone shed any light on this? I do have Yosemite and will unintall it to get my Scanner back if that's what it takes.  However, HP should "fix" this issue immediately; afterall, I spent close to $400 on this JetPrinter and am willing to return it.

    Hi @BertieBaby ,
    I see that you are having issues with scanning after updating drivers on the Mac. I will certainly do my best to help you.
    Did you download and install the Full Feature Software when you first setup the printer?
    If you didn't, please download and install them from this link. HP Color LaserJet Pro MFP M176/M177 Series Software.
    If you already have the Full Feature Software installed, try the following steps:
    Repair the Disk Permissions on the Mac:
    Close all applications.
    On the Apple menu bar, click Go, click Applications and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left.
    Click Verify and then Repair Disk Permissions.
    Restart the computer..
    Reset the Printing System:
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Click the Apple icon and then click System Preferences.
    Click Printers & Scanners.
    Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system.
    Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name-LaserJet Pro 100 color MFP M177fw Bonjour) Then click on the Add button.
    Test the printing and scanning.
    If there is anything else I can help you with, just let me know.
    Have a nice weekend!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hp scan not installed (HP Laserjet Pro 200 Color MFP)

    Hi all,
    My "HP Scan" desktop icon stopped working.
    HP "Pring & Scan Doctor" could find the software on my laptop.
    As the next step I uninstalled the software (Scanner software).
    At HP Smart Install I reinstalled the printer.
    Owever, the installation didn't install the scanner applicaktion.
    How should I proceed to get the scanning app back?
    The printer is working fine when it comes to printing.
    I use a wireless connection to my printer.
    Grateful for any good tips!
    This question was solved.
    View Solution.

    Hi @TobySweden ,
    I see that you are having issues with the scanning application not installing over the wireless network. I would like to help you resolve this issue, but I will need some more information to provide the proper steps.
    What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
    There are a few Laserjet 200 series models.
    In the mean time, I would uninstall the printer software, download the latest drivers and software for Windows 8.1 and install it this way without the Smart Install.
    Have a wonderful day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Scanner error 6: HP LaserJet Pro 400 color MFP M475dw does not get through initialization phase

    My lJ400 MFP475 detects a problem with the scanner unit after chewing on it for several minutes and never finishes intitialization. Initially you can hear the scanner head move softly, but after less than a minute it starts rattling at the end of every move.
    After a few minutes I get the message "Scanner error 6, Turn off then turn on".
    I did that, again and again. Also with cables removed, waiting for some time etc.
    In the Event log I can see the following:
    Entry # Code Page Description
    10 54.2100 1035 BD error
    9 54.2100 1023 BD error
    8 54.2100 1016 BD error
    7 54.2100 1015 BD error
    6 54.2100 1014 BD error
    5 54.2100 1011 BD error
    4 54.2100 887 BD error
    3 41.3000 260 Unexpected Paper Size
    2 54.2100 43 BD error
    1 54.2100 39 BD error
    I have used this MFP sparingly and am only halfway the first set of color toner cartridges, so I'm a bit disappointed about how quickly this printer gives up. My previous printer was an Apple Laserwriter Select 360 that lasted for 20 years (no, I'm not kidding, bought it in 1993).
    Any clue?

    Hello Nazdrovje,
    Welcome to the HP Forums.
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Which inf file to use for HP LaserJet Pro 200 color m251nw, when updating the driver?

    My printer is LaserJet Pro 200 color Printer M251nw. I visited the support page and found there is a newer driver.
    Driver (61.117.01.15301)
    Currently my driver version is 61.117.1.11493. I want to upgrade the driver.
    After downloading and unzipping the files into the folder, I found there are 3 inf files in the folder:
    hpcm251u.inf
    hpcm251c.inf
    hpbuio70l.inf
    So which one should I install? I am disappointed at the lack of information and inconvenience in upgrading the driver.
    June

    Hi CJKim,
    Welcome to the HP Forums.
    I see that you are trying to update the driver and are not sure which .inf to choose.
    I will be happy to help you.
    Since it is running through the add printer wizard you can select any one of the .inf files you listed
    to update the drivers.
    Thank you for posting on the HP Forums.
    Have a great day.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Loading the laserjet pro 200 color m251 nw one sheet at a time?

    How are you supposed to load the laserjet pro 200 color m251 nw one sheet at a time?

    Hi Choffman,
    Thank you for visiting the HP Support Forums! To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
    I hope this helps!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • How to lock the Printer of LaserJet Pro 500 Color MFP m570dw

    how to lock the Printer of LaserJet Pro 500 Color MFP m570dw

    You can set a control panel lock security level and password for your HP LaserJet series printer. To lock your printer, follow below link:
    http://h20564.www2.hp.com/hpsc/doc/public/display?​docId=emr_na-bpl03612

Maybe you are looking for