Unable to install the USB internet modem?

I would like to use internet USB modem, when i plug in it is not reading and unable to install. but the same i can use very well in windows computer. Need help on installing the modem.

You will have to contact and discuss your issue with the technical support unit of your provider.  Bimmer 7 Seriers makes an excellent point.  I too had to revert to Lion from Mt. Lion due to technical problems with a USB modem.  In my case, the modem cannot run in a 64-Bit environment.  I suspect that is your problem.
I think that the solution lies with your provider or a different one.  There is nothing more I can do to assist you.
Ciao.

Similar Messages

  • I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required.  Can you please help?

    I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required.  Can you please help?

    I fould a hack that makes the sites think you have the latest (Intel) version of Flash installed. So I installed it & it works with Firefox, TenFourFox & Safari. Here's the info.
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
     Cheers, Tom

  • How to connect my USB internet modem to iPad2?

    hi,
    I am looking for way to connect my USB internet modem stick to iPad2; I understand one way is to get a pocket Internet hub and thru that I can connect via WiFi.
    But is there any way that we can directly connect the USB modem to iPad and use it?

    A 3G wireless router may do the job. I have used that years ago.
    http://www.aztech.com/prod_3g_hw550.html

  • Unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw in windows 7 64 bit

    HI 
    am unable to install   the scanner on the  HP LaserJet Pro 200 color MFP M276nw Drivers in windows 7 64 bit  , after runing the setup ,the printer will finshing the installation process and and it will show that the HP Scan and HP fax failed. 

    Hi @Chembo ,
    I see you're experiencing issues installing the printer software. I will do my best to assist you with this issue.
    I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
    Restart the computer.
    Disconnect the USB cable from the printer.
    Run the uninstall from the CD.
    Go start, computer, right click on the CD for the printer, left click open in a new window, double click on uninstall.
    Make sure that the print spooler service is running.
    Right-click Print Spooler, and then click Properties.
    If the Startup type is set to Manual or Disabled, click the drop-down list, click Automatic, and then click Apply.
    Under Service status, click Stop and then Start, and then click OK.
    Run the installation again and don't connect the cable until prompted.
    Test the printer.
    Then you will have to go back and enable the Startup programs, Microsoft Services and turn the Antivirus Software back on again.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Unable to install the Novell File Upload extension to upload directories

    Using Firefox 9.0.1 on Windows 7 I'm unable to install the Novell File
    Upload extension to upload directories.
    As per the pop-up help page, I've added
    extensions.install.requireBuiltInCerts in about:config and set it to
    false but that has made no difference, even after restarting the browser.
    I've also tried this with Firefox 9.0.1 on Mac OS X Snow Leopard
    (10.6.8) - unsupported I know - with the same result.
    Do I really have to use Internet Explorer? Urgh!
    Simon
    Novell/SUSE/NetIQ Knowledge Partner
    Do you work with Novell technologies at a university, college or school?
    If so, your campus could benefit from joining the Novell Technology
    Transfer Partner (TTP) program. See novell.com/ttp for more details.

    On 19/01/2012 18:11, craig wilson wrote:
    > You should trust the ZCM CA and the error will go away.
    > It's not expected to get that error.
    > Managed Devices especially will have loads of issues if the ZCM CA is
    > not trusted.
    So, with Firefox, first hitting http://<server>/zenworks/ after install
    displays
    --begin--
    This Connection is Untrusted
    You have asked Firefox to connect securely to <server>, but we can't
    confirm that your connection is secure.
    Normally, when you try to connect securely, sites will present trusted
    identification to prove that you are going to the right place. However,
    this site's identity can't be verified.
    What Should I Do?
    If you usually connect to this site without problems, this error could
    mean that someone is trying to impersonate the site, and you shouldn't
    continue.
    [Get me out of here!]
    > Technical Details
    > I Understand the Risks
    ---end---
    so I click "I Understand the Risks", [Add Exception...] then [Confirm
    Security Exception] at which point http://<server>/zenworks/ correctly
    displays and I can log in. Checking Tools | Options | [View
    Certificates] shows an (Unknown) server certificate for <server> with a
    Permanent lifetime.
    Is that what you mean by trusting the ZCM CA?
    Perhaps this is why Firefox 9.x is not a supported browser though I
    thought that was more to do with Mozilla treating major version numbers
    as minor ones? Gee if only Firefox hadn't automatically upgraded itself
    from 8.x to 9.x!
    Thanks.
    Simon
    Novell/SUSE/NetIQ Knowledge Partner
    Do you work with Novell technologies at a university, college or school?
    If so, your campus could benefit from joining the Novell Technology
    Transfer Partner (TTP) program. See novell.com/ttp for more details.

  • Unable to install the 7.0.4 update

    Unable to install the 7.0.4 update it keeps on saying update could not be installed because you are not connected to the Internet even though I am connected to the Internet

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Connect to wifi and try again.
     Cheers, Tom

  • Unable to install the IOS version 4.3 on iPod Touch and iPhone 4 you know why?

    Unable to install the IOS version 4.3 on iPod Touch and iPhone 4 you know why?

    Wifi or USB update? Have you tried the other?
    Have you tried reseting the iPod? Notihng is lost?
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • My DVD player will not work. I am unable to install the snow leopard 10.6.3 because of it.

    My DVD player will not work. I am unable to install the snow leopard 10.6.3 because of it.

    Do you have a friend with an Intel Mac. If your MacBook and their Mac have firewire ports you can install by Target Disk Mode. You'll need a retail version of SL to do this with any Mac other than a MacBook.
    Start up your friend's Mac with your install disk. After you get to the install screen on your friend's Mac connect your MacBook to your friend's Mac in "Target Mode"with a firewire cable http://support.apple.com/kb/HT1661
    Then open "Disk Utility" from the "Utilities Menu" on the Menu Bar from the install disk on your friend's Mac. You should see both your MacBook and your friend's Mac hard drives in there. Erase and partition your MacBook drive and then choose that drive when you go back to the install screen. Or install over your existing OS on your drive if you have applications you want to keep.
    The only other way is to buy an external DVD drive on eBay. http://shop.ebay.com/i.html?_nkw=firewire+external+dvd+drive&_sacat=0&LH_BIN=1&_ sop=15&_dmpt=Apple_Laptops&_odkw=usb+external+dvd+drive&_osacat=0&_trksid=p3286. c0.m270.l1313 or at MacSales http://eshop.macsales.com/shop/firewire/optical-drives/
    And of course be sure your Macbook meets the system requirements. To upgrade to Snow Leopard or install Snow Leopard for the first time, you must have a Mac with:
    An Intel processor.
    An internal or external DVD drive, or DVD or CD Sharing.
    At least 1 GB of RAM (additional RAM is recommended).
    A built-in display or a display connected to an Apple-supplied video card supported by your computer.
    At least 5 GB of disk space available.

  • Why am I unable to install the ios 5.1 update on my ipod touch? Keep getting a message "unable to install".

    I am unable to install the ios 5.1 to my ipod touch.  I have tried over and over and get the message "unable to install update."  My touch has 100% battery charge so I know that is not the problem. 

    Wifi or USB update? Have you tried the other?
    Have you tried reseting the iPod? Notihng is lost?
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • HT4623 While updating ios6 through software update option, i am getting the error"unable to install the update an error occured installing IOS6"

    While updating ios6 through software update option, i am getting the error"unable to install the update an error occured installing IOS6"

    I am getting this message also.... mine cant update too...

  • I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

    I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

    Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
    I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
    At that point, a "Close" button is pulsating blue at the bottom of the window.
    Sorry for the tedious detail. Anything revealing there?
    Thanks!

  • Unable to install the latest version of Adobe Muse via Adobe Application Manager

    I´m a user of Creative Suite applications  and all of them have been updated successfully with the exception of the latest version of Adobe Muse.
    I´m unable to install it. I get error DW 050
    I´m using Windows 7 64 bit.
    All previous versions of Adobe Muse have been installed OK.
    Following a forum discussion I could read, I uninstalled the previous version, but the installation fails again.
    Does any body know how to solve this issue?

    Dear Sachin:
    Thank you for your help, however I have to get back to you to inform that after  downloading the new package based on the link that you´ve provided, I´m  still unable to execute the application.  I get the message: “block by the administrator”  and also another message: “the editor of this program is unknown and unsafe”. Please note that all other programs from Adobe´s Creative Cloud have been downloaded and installed with success. All Adobe Creative programs have been installed on my computer several months ago and all are working fine so far.  This morning I installed an update for Photoshop without  any problem. It seems that the problem persists only with Muse. I have to highlight that I´m the administrator of my PC and therefore all applications are currently being executed as administrator. I have never had the intention to block any program, including obviously Adobe´s Creative Suite programs.
    Could you please let me know how to splve this problem?
    Michael.
    De: Sachin Hasija [email protected]
    Enviado el: lunes, 28 de enero de 2013 18:57
    Para: retonxxy
    Asunto: Unable to install the latest version of Adobe Muse via Adobe Application Manager
    Re: Unable to install the latest version of Adobe Muse via Adobe Application Manager
    created by Sachin Hasija <http://forums.adobe.com/people/Sachin+Hasija>  in Help with using Adobe Muse - View the full discussion <http://forums.adobe.com/message/5028441#5028441

  • I'm unable to install the Mac os x 10.7.3 update.  I get an error message each time my macbook tries to install the downloaded updates.  Can anyone help me?

    Each time my macbook restarts and tries to install the downloaded software updates, I get an error message telling me that there might have been an error during the download process of the updates and that he's unable to install the updates.  What can I do?

    What are you trying to download? If you are referring to the recent security update, just ignore the error and select the option to open the installer. It's fine.

  • I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?

    I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?

    U44.. update error http://forums.adobe.com/thread/1289956 may help
    -more U44.. discussion http://forums.adobe.com/thread/1275963
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  • I am unable to install the creative cloud update - error 43 comes up at around 77%

    I am unable to install the creative cloud update - error 43 comes up at around 77%. I'm a relatively new user.

    WIthout proper system info and the detailed error report nobody can say much. Most likely you run out of disk space.
    Mylenium

Maybe you are looking for