Unable to install windows 7 and fedora in a dual boot even with windows 8 and fedora also

Unable to install fedora in dual boot please help me to install, is my system supports windows 7 or not with fedora or windows 8.1 with fedora please help me i need very urgent installation of fedora

Hi @siddu007 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP 15-r262tu Notebook and issues with Dual booting Fedora. Here is the support site for Linux for troubleshooting.
Here is a link to Microsoft on your Downgrade Rights. Some features will not be available in a different OS.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

HOW TO DUAL BOOT W540 with windows 8.1 / 7

I got my W540 recently with windows 8.1 pro on it. but as all engineers worst nightmare windows 8 has hard time with engineering softwares (for my case TIA Portal for PLC programming software which only support windows 7). so i need to have a windows 7. i prefer to keep my windows 8 and have dual boot system with windows 7 added. But i can't install windows 7. initially due to disk type (GPT), then i changed it to MBR without losing my files (which only was possible if i had deleted the recovery partition- now my recovery is on my flash drive). But there are already 4 partitions on the system (1 for C: drive and 3 for recovery and system files which came originally with the product) , how can i install a windows 7? i can't add another partition because that makes my disk a Dynamic disk (which i don't really know what is). all in all, i really need windows 7 on my system ASAP. If anyone know how to fix this please reply. Thanks guys.
Solved!
Go to Solution.

You are limited to four PRIMARY partitions on an MBR disk.
But other than the "active" partition (i.e. the small 100MB "system reserved" partition where Boot Manager is placed from doing a cold Windows install on an empty drive, or the 1.4GB equivalent Boot Manager partition that Lenovo provides along with other tools and utilities), all other partitions on the drive can be "logical". They are not required to be PRIMARY, although Lenovo delivers its partitions that way. But you can change that.
You can have up to 120 LOGICAL partitions on a drive (all of which live inside an originally PRIMARY partition which gets converted to an "extended partition" which houses all of the logical partitions. So if you have at least one logical partition (and thus have to give up one primary partition in order to build that required "extended partitions"), that means you can have up to three remaining primary partitions and up to 120 logical partitions... all on an MBR disk. No "dynamic", and no GPT.
Yes, that means even the Windows system partition itself (i.e. "C") can be on a LOGICAL partition. It's only that one "active" partition (where the BIOS goes to find Boot Manager and its menu, and kick off the rest of the system boot process) which truly must be PRIMARY. That's the only requirement.
So, if you want to use MiniTool's Partition Wizard to carve out sufficient free space for your second Windows 7 partition (by shrinking your existing Win8 partition), you can create one or more logical partitions inside that new free space, and do the Win7 install to one of those empty logical partitions. You can then use a second logical partition in that same free space for "data", if you want.
Note that Partition Wizard can even convert one of your existing primary partitions to logical (i.e. convert it to an "extended partition", inside of which will be then be the original primary partition now converted to logical). You can then shrink or move/resize the partitions on the drive (both primary and logical) however you want, to perhaps make room for additional "logical" partitions inside of that now present "extended partition" which can hold up to 120. You can even convert ALL of your primary partitions except for the one "active" partition (which MUST BE PRIMARY) to logical partitions, which gives you maximum flexibility in having even more than just two bootable OS's along with one or more data partitions, etc., up to 120 logical partitions... plus the one "active" primary Boot Manager "system reserved" partition which must be kept.

Can I dual boot Mac with Windows?

Hi all,
At the moment I have Windows 7 32 bit OS. I've always wanted either an iMac, or atleast the Mac OS. I've recently found out it's only £20.99, and i've always thought it was a lot more than that, which is a bargain! The only thing which is stopping me from buying it at the moment, is that certain programs which I use reguarlarly won't work on Mac, and I really need those programs. Is their anyway I could dual-boot it with Windows 7, so I give Windows 7 say only 8gb of my hard drive, and Mac the rest?
I will appreciate any answers, and thanks for tackling this for me!

ryanroks1 wrote:
Thanks for helping
Is an Intel Mac just an Intel Processor, with Mac OS?
Yes Macs changed to Intel Processors in about 2007. You can upgrade as far as Lion with a Core2Duel Processor or better. CoreDuos will only update as far as Snow Leopard.
Hope this helps
Pete

Unable to install iTunes 10.5 on Win 7 laptop - "Problem with Windows Installer program"

I get the following when trying to install version 10.5
I have uninstalled everything Apple, emptied temp files, restarted the computer and I'm still unable to install the lasted iTunes.
Any thoughts?

1. Go to softpedia.com
2. In the search box in softpedia.com web site type in 'Windows Installer Cleanup Utility'. Click on GO
3 On the next page, at the bottom you will see in blue 'Windows Installer CleanUp Utility 2.5.0.1 by Microsoft'
4 Click on that link and it will take you to another page. On the left side you will see a 'download' button in blue colour. Click on that button and it will take you to the next page.
5 Click on link that reads: 'Softpedia Mirror (US) exe', A download window will appear. Click on 'save file'.
6 Install 'Windows Installer ClenaUp Utility' program.
7 After installing program, open up the program and scroll down the list till you find 'Apple Software Update'
8 Highlight it and click remove.
9 Now you can install itunes 10.5
This is exactly what I did and it worked for me like a charm. I even updated my iphone with IOS 5 tonight.
There is another way which I learned later which is easier and faster. I am running Windows 7. Go to 'Control Panel'. Scroll down to 'Programs and Features' and click on it. Scroll down till you see 'Apple Software Update' and right click on it and click 'uninstall' and then install itunes 10.5. That should work also. I've heard that some people can't see it in control panel so the other way would be to do as I did and download the Windows Installer CleanUp Utility. I hope I've made this as simple as possible for you. Good luck.

Installing mac os x on an existing dual-booted laptop (with windows/linux)

Hey everybody,
I am wondering if any of you have advice for the best way of going about installing a version of the Mac operating system on my Dell laptop, considering that I already have Windows and Linux (SuSE) in a dual-boot environment, and an Intel Pentium 4-M processor (which I think is x86?)...
I've looked at the Mac store and it looks like OS X Tiger is only for PPC processors. Is there a way to get it to run on my processor?
The reason I am doing this is that I really want to test a website I am developing on Mac browsers, like Safari and IE on Mac, but I can't afford to buy a new Mac system (nor do I really want to, since I use this one computer for everything).
Also, would the Mac installer be able to partition my drive for me automatically?
Thanks!
Stephen

Just make your web site standards compliant and we'll be fine.
The only trouble we'd have is if you started coding your sites chock-full of Microsoft ActiveX garbage.
And don't bother coding your web site to function on IE for Mac. Most Mac users are smart enough to not use a dead web browser which hasn't been supported or updated in years. Microsoft ended its life long ago.

How to set time in Dual-boot config with Windows 8.1

Hi,
I have been trying to workaround this problem i am having with Arch linux and Windows 8.1 time settings.
According to Installation guide on Wiki I set hardware clock to UTC and added my local time zone too.
But my Windows 8.1 uses hardware clock a local time and it is really confusing me.
I did tried to setup Windows 8.1 to use UTC (http://superuser.com/questions/494432/f … bios-clock)
but that settings is not working on my side (most Windows 8.1 users are also getting the same problem)
Please help.

I have two laptops which are dual booted arch and Windows 8.1. For both of those machines I set the Windows clock to be UTC instead of local using the method in https://wiki.archlinux.org/index.php/Ti … in_Windows (i.e. creating the .reg file and executing it - take care that the .reg file is created correctly with the .reg extension or it won't execute). I still allow Windows 8.1 to update its time from the network and it does not cause a problem, though the advice is to let Arch do the time synchronisation. (That may be because it is not yet summertime so I will also disable time sync in Windows before the change to summertime at the end of this month). I also followed the normal install advice for Arch and have the hardware clock in UTC, and have chrony set up to keep time in sync. Additionally I use KDE and have my normal timezone with DST adjustments for summertime. I have not had any problem with that way of working on either of my two machines.
I presume that if the Windows clock registry hack is done after the dual boot install it should not matter but I made that change before installing Arch.
Last edited by mcloaked (2014-03-21 10:46:04)

Is it possible to have a dual boot system with Windows that can ALSO be booted into a virtual machine optionally?

I have been looking for a solution to this for some time now. I want the convenience of a virtual Windows environment that can run simultaneously with OS X Lion--something I have right now using Virtualbox. But at the same time, there are graphics and processor-intensive Windows applications (for me, games and engineering applications) that don't run well at all in a virtual machine. So, here is what I am looking for:
A dual boot (i.e. bootcamp) system running Windows 7 and OS X Lion in which the Windows 7 machine can EITHER be booted as a virtual machine while running OS X OR booted physically so as to utitlize all system resources. The real trick however, is that I I want the virtual machine and the physical machine to be the exact same system. Meaning, if I boot physically into Windows and change something... rename a file, run a program and create a file, etc... those changes will all appear in the virtual machine.
Now, what are my options? I have read about Virtualbox and VMWare Fusion's "Raw Disk access" function but I can't tell if that's what I'm looking for or not... I half-thought that they were talking about converting a physical OS into a virtual machine, but without the intention of booting the physical OS again...
Also, I'm open to any software, free or otherwise. Thanks!

both VMWare Fusion & Parallels Desktop for Mac can use a bootcamp Windows installation as VM exactly like you want.

Unable to connect to internet or print wirelessly on Boot Camp with Windows 7

I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
A month later, I am unable to connect to internet or print wirelessly.
It states that I am connected to my router.
When I trouble shoot, it cannot find the problem.
My wireless connection and cable connection are fine on the MAC side.
Please help.

looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router? Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.

Unable to install flash player. After downloading the Adobe FLash Player Installer and running it, a grey pop up window opens up but nothing is displayed in it. There is no progress bar or anything.

Unable to install flash player. After downloading the Adobe FLash Player Installer and running it, a grey pop up window opens up but nothing is displayed in it. There is no progress bar or anything and even after keeping it running for a long time there is no progress. Please help with this issue.

Hi Prat,
We are aware of this issue and are working on a fix. In the mean time, please use the offline installer, posted at the bottom of the help page corresponding with your OS and browser:
Installation problems | Flash Player | Windows
Installation problems | Flash Player | Mac
The installers are at the bottom of the page, in the 'Still having problems' section.
Maria

Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS

Another user,
Cheer08, has replied to a thread you have subscribed to in the
SQL Server Express Forum.
Here are the error messages:
Error 2
Error 1
Hello,
This error is related to Microsoft Visual C++ 2005. Could you try to download and install Microsoft Visual C++ 2005 with service pack 1 (SP1) included:
http://www.microsoft.com/en-us/download/details.aspx?id=5638 (x86 or 32-bit)
http://www.microsoft.com/en-us/download/details.aspx?id=18471
(x64 or 64-bit)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thread Title Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS.
Started by: FenixRising
Reply:
Fenix, this is SQL Server forum. Regarding the Visual C++ 2005 SP1 Redistributable setup issue, you need to post question in
visual studio forum to get better help.
After installing Visual C++ 2005 SP1 Redistributable successfully,are you able to install SQL Server? If not, share us SQL Server setup logs. This link
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx will help you View and Read SQL Server Setup Log Files
Im going to run it now. Get back to you.

Hi,
    I am unable to install SQL Server 2012. I have the install log, but I don't can't read them.
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2053898239
Start time:                    2015-02-08 23:03:01
End time:                      2015-02-08 23:07:31
Requested action:              Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS:        Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS:            Use the following information to resolve the error, and then try the setup process again.
Next step for RS:              Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine:       Use the following information to resolve the error, and then try the setup process again.
Next step for FullText:        Use the following information to resolve the error, and then try the setup process again.
Next step for Replication:     Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name:                  RLC_WORK
Machine processor count:       4
OS version:                    Future Windows Version
OS service pack:
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered Configured
SQL Server 2012
Client Tools Connectivity                1033
11.2.5058.0     No         Yes
SQL Server 2012
Client Tools Backwards Compatibility     1033
11.2.5058.0     No         Yes
SQL Server 2012
Client Tools SDK                         1033
11.2.5058.0     No         Yes
SQL Server 2012
SQL Server Data Tools                    1033                 Express Edition
11.2.5058.0     No         Yes
SQL Server 2012
LocalDB                                  1033
Express Edition      11.0.2100.60    No         Yes
Package properties:
Description:                   Microsoft SQL Server 2012
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
Installation location:         C:\76766b629842c4dc54646a47c04202\x64\setup\
Installation edition:          Express
Slipstream:                    True
SP Level                       2
Product Update Status:
Success: KB 2958429
Product Updates Selected for Installation:
Title:                         Service Pack 2
Knowledge Based Article:       KB 2958429
Version:                       11.2.5058.0
Architecture:                  x64
Language:                      1033
Update Source:                 Slipstream
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      true
AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Disabled
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASLOGDIR:                      Log
ASPROVIDERMSOLAP:              1
ASSERVERMODE:                  MULTIDIMENSIONAL
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 <empty>
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
BROWSERSVCSTARTUPTYPE:         Disabled
CLTCTLRNAME:                   <empty>
CLTRESULTDIR:                  <empty>
CLTSTARTUPTYPE:                0
CLTSVCACCOUNT:                 <empty>
CLTSVCPASSWORD:                <empty>
CLTWORKINGDIR:                 <empty>
COMMFABRICENCRYPTION:          0
COMMFABRICNETWORKLEVEL:        0
COMMFABRICPORT:                0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE:               0
CTLRSVCACCOUNT:                <empty>
CTLRSVCPASSWORD:               <empty>
CTLRUSERS:                     <empty>
ENABLERANU:                    true
ENU:                           true
ERRORREPORTING:                true
FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, RS, SSMS, ADV_SSMS
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD:                 <empty>
HELP:                          false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS:              false
INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    SQLEXPRESS
INSTANCENAME:                  SQLEXPRESS
ISSVCACCOUNT:                  NT AUTHORITY\Network Service
ISSVCPASSWORD:                 <empty>
ISSVCSTARTUPTYPE:              Automatic
MATRIXCMBRICKCOMMPORT:         0
MATRIXCMSERVERNAME:            <empty>
MATRIXNAME:                    <empty>
NPENABLED:                     0
PID:                           *****
QUIET:                         false
QUIETSIMPLE:                   false
ROLE:                          AllFeatures_WithDefaults
RSINSTALLMODE:                 DefaultNativeMode
RSSHPINSTALLMODE:              DefaultSharePointMode
RSSVCACCOUNT:                  NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD:                 <empty>
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         <empty>
SECURITYMODE:                  <empty>
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD:                <empty>
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           RLC_WORK\Robert
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  true
TCPENABLED:                    0
UIMODE:                        AutoAdvance
UpdateEnabled:                 true
UpdateSource:                  Slipstream
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\ConfigurationFile.ini
Detailed results:
Feature:                       Management Tools - Complete
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Management Tools - Basic
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Reporting Services - Native
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       Full-Text and Semantic Extractions for Search
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, and then try the setup process again.
Component name:                Microsoft .NET Framework 3.5
Component error code:          0x85940001
Error description:             Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\SystemConfigurationCheck_Report.htm
Fenix

I had an early version of photoshop (2.0 I think) that worked perfect on windows vista. I bought a new laptop with windows 8.1 and the photoshop won't install. Which version of Photoshop compatible with Windows 8.1 is closest to the older photoshop?

I had an early version of Photoshop (2.0 I think) that worked perfect on windows vista. I bought a new laptop with windows 8.1 and the Photoshop won't install. Which version of Photoshop compatible with Windows 8.1 is closest to the older Photoshop?

I think you mean Photoshop CS2. Photoshop 2 is from around 1992. The old Adobe activation servers were taken down. CS2 is about a decade old Adobe made a new download for old customers that legal customers can download and install. Download Acrobat 7 and CS2 products

I have Photoshop CS on my Windows XP PC and I am updating to a newer PC with Windows 8. Am I able to install my version of Photoshop or will it interfere with windows 8?.

I have Photoshop CS on my Windows XP PC and I am updating to a newer PC with Windows 8. Am I able to install my version of Photoshop or will it interfere with windows 8?.

It is quite easy to transfer your files to the new Mac.
When you start up your new Mac for the first time, it will guide you through the steps of setting up the operating system, and one of the steps will ask you to restore files from another PC, Mac or external drive.
At this point, you can install Windows Migration Assistant on your old PC, choose the option to transfer files from another PC on the Mac and follow the on-screen steps. It will let you choose what you want to transfer, so make sure you transfer the folder with your photographs (normally, Pictures).
After setting up your computer, you will have a lot to learn because it is a completely new operating system. Apple prepared some articles for new users that you may want to read in order to use your computer > http://www.apple.com/support/macbasics/ Also, if you live near an Apple Retail Store, there are workshops there to help you use your Mac

Hi there, Is it possible to install ESXi 5.5 on a PC i5 3770K with windows 7, 64bits and motherboard asus Z77 ?

Is it possible to install ESXi 5.5 on a PC I5 3770K with windows 7, 64bits and motherboard asus Z77 ?

Hi(Bonjour)!
Here's the follow up:
I took a chance and installed MAC OS X 10.4.9 COMBO and QT 7.1.6 update, installed FCS 2 suite and my old TRV 340 still works perfectly.
I erased livetype included with FCE HD as suggested by apple tech note, and the installing process worked like a charm.
I keep my version of FCE HD 3.5.1 and original soundtrack . Both applications work well side by side with FCP 6.
Great.
Michel Boissonneault

Can't install adobe photoshop elements on my new HP computer with windows 8

Can't install adobe photoshop elements on my new HP computer with windows 8.

Which version of PSE? Older versions are simply not compatible. Only 10 and 11 are.
Mylenium

Unable to view external webcam content. I'm using IE11 with Windows 7 64 bit. I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view

Unable to view external webcam content. I'm using IE11 with Windows 7 64 bit. I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view them on mobile phone via puffin browser. I can play Youtube videos etc just fine. So why not the webcam?

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

Unable to install windows 7 and fedora in a dual boot even with windows 8 and fedora also

Similar Messages

Maybe you are looking for