Unable to install Windows 7 on Macbook Pro (mid2014)

I have been trying unsuccessfully to install  Windows 7 using Bootcamp on a Macbook Pro  15" Retina display (mid 2014)
I have made a usb stick with  Windows 7 and drivers using bootcamp, and was able to partition a 50gb windows drive on the 500gb SSD drive in the Macbook.
Windows Setup seems to boot normally, and I get to the part where I am supposed to select and format the  Bootcamp partition.  I select format, but when I select Next after I format the Bootcamp partition,  Windows Setup tells me it was unable to create a new system partition or locate an existing system partition. I can't go any further.  I also noticed that the partition Name  BOOTCAMP disappeared when I formatted  the boot camp partition (partition 4).  I just run the bootcamp assistant and delete the windows partition, but I would like to install a Windows version.   Perhaps Windows 7 is not compatible with this macbook and I need to install Windows 8.1

Here is the output copied from Terminal. The first time that I tried to use Bootcamp, I lost 50gb when it failed, so I used Carbon Copy drive to restore my missing info.  I may try to delete it all, and recover then use time machine to reset everything back to original.
MacBook-Pro:~ John$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            499.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             784.2 MB   disk0s3
MacBook-Pro:~ John$ diskutil cs list
No CoreStorage logical volume groups found
MacBook-Pro:~ John$ sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=500277790720; sectorsize=512; blocks=977105060
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 977105059
      start       size  index  contents
          0          1         PMBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6        
         40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640  975163704      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
  975573344    1531680      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
  977105024          3        
  977105027         32         Sec GPT table
  977105059          1         Sec GPT header
MacBook-Pro:~ John$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 60821/255/63 [977105060 sectors]
Signature: 0xAA55
         Starting       Ending
#: id  cyl  hd sec -  cyl  hd sec [     start -       size]
1: EE 1023 254  63 - 1023 254  63 [         1 -  977105059] <Unknown ID>
2: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused     

Similar Messages

  • Installing windows on MacBook Pro

    I am looking into installing Windows on my Pro because I need Visual Studio for programming and just need some questions answered.
    1. Is there a Mac native alternative to Visual Studio? I am using it for a Visual basic class I am taking and we are creating windows applications.
    2. Can I buy an external hard drive to run Windows OS from? I opted for the ~256gb SSD MacBook Pro and am not wanting to waste storage space on Windows OS, especially since I do not foresee using it after this class.
    3. If I cannot run Windows from an external hard drive:  How easy is Windows installation, as well as how easy is it to remove Windows OS when I am finished using Visual Studio? Are there risks to my MacBook accompanied with Windows installation?

    1, No
    2, No, Microsoft doesn't allow that
    3, Read http://manuals.info.apple.com/MANUALS/1000/MA1583/en_US/boot_camp_install-setup_ 10.7.pdf

  • Installing Windows on Macbook Pro, NO BOOTCAMP

    I have a 15 inch core 2 duo Macbook Pro and I went to restore my computer to tiger once again and when I did I relised that the disk is too scratched up, I can only get about 90 percent of the minimal installation done.
    After a while of trying diffrent things i got fet up and partitioned my hard drive to Master boot record and poped in my Win7 install disk, I installed Windows 7 perfectly with no problems but now when I go to boot it up all I get is a grey screen and after a while a folder icon pops up with a question mark on it.
    How can I fix this without using another mac or bootcamp, because I DON'T have access to one and i DON'T have access to another mac cd, so don't give me that option, lol.. The only thing I have access to is another windows 7 computer.
    Please help, I thought mac was suppose to be one of the top brand computers. especially with the price of them, but so far I've had more trouble with this mac than what I did with my HP, I had my HP 3 years now and my macbook not even a year.
    Thanks,

    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the desired disk icon from which you want to boot.
      5. Click on the arrow button below the icon.
    Select the Windows disk icon and click on the arrow button.
    Where did you get the Windows installer from? Your HP? That's an OEM disc that cannot be used except on your HP. You need a retail Windows disc if you want to boot the Mac exclusively with Windows. Of course you will not have any of the hardware drivers for Windows for use on the Mac hardware.
    I don't understand your complaints about a computer you don't seem to know how to use, your installer discs are all scratched up and no longer usable, but you have had lots of trouble with it. And, all your doing is trying to use it as a Windows computer. Defies logic.

  • Installing windows on macbook pro without bootcamp. Will this allow for switchable graphics?

    Hi everyone, I was thinking of buying a new Macbook Pro Retina 15 Inch with the discrete nvidia graphics card inbuilt with it.
    I love windows and I am planning on running windows 7/8 on the macbook pro as my primary OS (because of advantages of gaming and being familarized with windows os), however I have heard the issue of running windows on bootcamp severally drains battery life as apple does not allow you to switch the nvidia graphics to the integrated graphics. Is this true? I have heard that running windows 7/8 on bootcamp allows for only around 3:30 hours of battery life, whilst OSX allows for 8+ since it uses the integrated graphics primarily when not running GPU demanding applications.
    I am wondering if you can install windows 7 without bootcamp which will wipe apple OS from the laptop completely. Will this allow for the laptop to do switable graphics without problems allowing the laptop to save much needed battery life?
    Thanks in advance.
    Michael

      Sorry it seems to have taken so long for you to get an answer on this question!
      Your last post was mostly right... It IS a bad idea to go that route!
      While it's technically POSSIBLE to get Windows in place without OSX, it's a MAJOR technical hassle and you need to jump through several hoops to get to that point.
      In addition to the hassle required, having an OSX partition can be incredibly useful at times - I've had my Windows system break several times in the past where the automated (and even manual) startup-repair process failed to get Windows booting again, but a short boot into OSX later, I have the problem resolved (via OSX) and am able to get back into Windows.
      Finally, you need to be aware that the graphics card situation isn't because of the presence of OSX. Just because you get rid of MacOS doesn't mean you suddenly will be able to use either graphics card! The limitation comes into play with the hardware drivers necessary to get all your hardware working in Windows - they just don't have the facility to switch graphics cards built into them.
      I'm afraid you're stuck with the NVidia card when using Windows, one way or another!
      Bootcamp is a prerequisite BTW. Without it you won't be able to get Windows installed at all (at least not without MAJOR stumbling block, again!), and again, the graphics card limitation isn't due to OSX or Bootcamp.
      Also, battery life... Yes. You'll have significantly less in Windows, and this isn't entirely because of the graphics card situation either. MacOS is just built so well, with the limited hardware used by Apple in mind, that power-management when using OSX os significantly better! The legendary battery life of Apple systems is actually primarily due to the operating system, not the batteries themselves!
      As a helpful indication: On my 2009 17" MBP I get about 7 hours on the integrated chip in OSX (8 is pusing it, but is possible sometimes); about 5 hours in OSX when using the NVidia; and about 3 and a half when I'm in Windows.
      Hope this all helps you. If you have any further questions feel free!
      Apologies for the scattered approach to answering your posts - it's LATE where I am and I"m kinda rushing through things... :-)

  • Not possible to install windows on macbook pro

    I have one Macbook pro 2011 late version . My boot camp assistant not showing option ” Create a Windows 7 install disk ” only showing download the latest windows support software from apple and remove windows partition. Please help me

    If you have a built-in Optical drive, you will not get an option to create a USB.

  • Unable to install Windows 8.1 pro 64 bit on my HP Pavilion g6 1318ax

    Hello,
    I have Windows 8.1 pro OS on my machine but that's 32 bit. I am trying to install 64 bit of the same but it says "This app can't run on your PC". The machine I am using is Pavilion g6 1318ax.
    Please advise.
    Thanks in anticipation.
    Regards,
    Dev

    Hi:
    You have to boot from the 64 bit installation media and do a clean (custom) install.
    It will not run from a 32 bit Windows desktop.
    No 64 bit operating system will.
    In other words, you can't upgrade from a 32 bit to a 64 bit operating system, and retain your programs and files.
    So back up any files you don't want to lose.

  • Unable to install Leopard on MacBook Pro G4

    I have a 2.16 GHz PowerBook G4 with 2 Gig of memory. When I try to install Leopard, I get as far as the restart. That it won't do. It comes up and says that it cannot be used as a start up disk and to make sure that the install disk is loaded. Well it is loaded, obviously, so what is happening? Why won't it continue into the installation. This is a brand new purchased disk.

    I do not recall it being a G5
    There was never a laptop from Apple with a G5 processor.
    so it must be a G4 unless that designation is not used for the Core 2's.
    "PowerBook" and "G4" only applied to the earlier laptops from Apple that contained the PowerPC G4 processor. Neither term applies to the current Intel-based Mac laptops of which the MacBook and MacBook Pro are examples. It's not a "technicality"; it's critical to identify correctly what model of Mac you have so that people give you appropriate advice. What works on one model of Mac doesn't always work on a different model.
    That said, I repeat my question: have you tried booting it by inserting the CD, restarting, and holding down the "c" key? If not, try that and see if that will boot the system.

  • How to install windows on macbook pro me294 using downloaded drivers?

    Recently I bought a MBP and I'am going to install windows on it because of my job. I have a problem with bootcamp assistant: I have downloaded the bootcamp drivers but when I am creating the setup disk it automatically chooses to download the drivers again! What should I do?

    i have done this steps but when i boot the usb key it freezes in the first screen ( selecting languages ) ! but i believe it doesn't freezes, it is because it doesn't recognize my hardware. when i was installing win8 there were no problems like this!

  • Can't Install windows on Macbook Pro Early 2011 with SSD upgrade

    Dear all,
        A few months ago I had an SSD upgrade and I purchased a Caddy and installed my old HDD on it, and I also changed my Battery because the old one only lasted for 15 inutes after 40 cycles :O
    Anyways when I insert a windows 7 or 8 x64 DVD in my USB Samsung DVD Drive, My mac book detects Windows (with the windows 7 DVD) and Detects Windows and EFI Boot (with Windows 8),  I have tried every option of those doesn't work.
    With EFI it just boots Mac
    With Windows it boots to a screen with one blinking cursor top left and then it ejects the DVD ROM and that it :s
    I do not know what is wrong :/
    P.S. when i installed the SSD I had windows on the old drive it didn't work after the upgrade (this is what made me link both incidents).

    I am willing to try this, but I was kinda trying to find a solution that doesn't need me to unscrew stuff ..etc

  • Hi, I would like to know if is it possible to install windows on mac pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

    hi, I would like to know if is it possible to install windows on macbook pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

    Windows on a Mac

  • Can you install Windows 8.1 Pro using Parallels on a new MacBook Pro without retina display?

    I am starting a graduate school program and I would like to purchase a MacBook Pro. The options for the non-retina display fit my needs best, but it sounds like the resolution requirements for Windows 8.1 Pro do not match the MacBook Pro without retina. I need Windows to run a statistics program (SAS) and ArcGIS for mapping. Any thoughts or experience installing Windows 8.1 Pro on MBP without retina?

    The native res on my 13-inch non-Retina is 1280x800. You might check with Parallels support or their forums to see if this is a problem.
    If you go with the non-Retina 13-inch, I'd recommend getting 8GB RAM (standard is 4GB) because Win emulators need a fair bit of memory.

  • Can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or other than purchasing an external drive??

    can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or any method other than purchasing an external drive??

    Note: These types of discs or activities are not supported by DVD or CD sharing:
    DVD movies.
    Audio CDs.
    Copy protected discs such as game discs.
    Install discs for an operating system such as Microsoft Windows (for use with Boot Camp), or Mac OS X.
    Burn a CD or DVD

  • My USB hub driver is not installing on my macbook pro windows 7 partition ?

    hey there, my USB hub driver is not installing on my macbook pro windows 7 partition .. any clue?

    yes am talking about windows 7 on my mac pro ... i did the following troubleshooting steps but no use and still the device is not recognized.
           - i changed the usb port .
           - i changed the hub it self .
         - i seaarched online for the driver automatically
            - i searched online for the driver manually ie. hardware id ..
             - i checked the connections,,
    anything else should i do ??

  • Unable to install Windows 7 RC x64 on macbook 2.2

    hi
    im unable to install windows 7 x64 rc on my macbook. i have a macbook 2.2 (white)
    after creating the partion using boot camp my comp restarts and gets stuck on a black screen that says
    1.
    2.
    choose CD-ROM boot type :
    thats it.. nothing more.. jst a blinking cursor.
    any idea wat the error is.
    1. can my macbook 2.2 (white) run x64?
    2. i have downloaded a patch for bootcamp (bootcampx64.msi) , wat do i do with it?
    3. what should i do next?

    http://jowie.com/blog/post/2008/02/24/Select-CD-ROM-Boot-Type-prompt-while-tryin g-to-boot-from-Vista-x64-DVD-burnt-from-iso-file.aspx
    Read carefuly that article. It describes step by step how-to modify Windows 7 64x RC DVD image to boot smoothly on any Mac. Be sure to creat 8 sector disk instead of 4
    Thanks to Jowie I was able to install Windows 7 64x on my early Aluminium iMac.
    PS: Be sure to download Boot Camp version 2.1.1 and modify it so setup will run without errors. I can't hel you with direct links but I can at least warn you. Have fun and good luck

  • I have Windows 8.1 installed on my Macbook Pro Retina (Late 2013) and it keeps on crashing with a WHEA_UNCORRECTABLE_ERROR BSOD error

    I have Windows 8.1 installed on my Macbook Pro Retina (Late 2013) and it keeps on crashing with a WHEA_UNCORRECTABLE_ERROR BSOD error. Is this an issue with the bootcamp driver not compatible with Windows 8.1? or is there something I can do to fix this.
    I also keep getting WHEA-Logger Event-ID 19 warning events in the Windows Event Logs with the following details.
    A corrected hardware error has occurred.
    Reported by component: Processor Core
    Error Source: Corrected Machine Check
    Error Type: Cache Hierarchy Error
    Processor APIC ID: 3
    The details view of this entry contains further information.

    likely win8.1 dont have official bootcamp support yet
    1/3 of my logins into win8.1 result in a fatal bluescreen
    was the same deal when I installed win8 before official support
    and when the drivers with official support was released the issue went away

  • HT5628 Is it possible to install MS-Windows on MacBook Pro as the only OS

    Is it possible to install MS-Windows on MacBook Pro as the only OS, using all the space of the SSD, by de-isntalling thus completely the Mac OS?

    Yes.
    but
    You will have to erase the drive completely and install Windows, you can't achieve it just by deleting OSX
    I do not recommend that you do it.

Maybe you are looking for

  • 10.4.11 upgrading to Snow Leopard - DVD won't load

    Hello fellow users, I could use a bit of help updating my macbook from 10.4.11 to Snow Leopard. I have 10.4.11 and i'm updating to 10.6, Snow Leopard. I've already checked basic requirements, backed up and i'm ready to install... I chatted with a app

  • G/L in transaction F110

    Dear Expert, We have changed bank for our pyment. Regarding this i have two questions : 1. If we retain same house bank id of the existing bank then how to assign new G/L to  this which will replace existing G/L. 2. I need to know whether the option

  • Extended withholding Taxes

    We are facing issues while adjusting TDS on down payment against invoice. The Ecess amount is not getting calculated properly. Can anyone please let me know what are the settings required in the "Tax type for payment" for adjusting TDS on downpayment

  • Sales Order Workflow to trigger when there is change in PO date

    Hi All      I have a requirement, I have to  trigger a work flow when ever there is a change in a po date of Sales Order(VA02). I have created a workflow and added entry into events tab of header, and in SWEC I have added an entry as follows Change d

  • Cross Dissolves: quick way to add just ONE!?

    So i've updated to the newest update of final cut x, but i'm still hung up on adding cross dissolves i have two clips on my timeline, i want to add a cross dissolve between the two cuts. so i right click between the two and choose 'add cross dissolve