Unable to install Windows 7 pro after restart by Boot Camp Assistant

Hello,
I have an issue with installing windows 7 pro 64bit on my MBP 13" mid 2009.
It has 500GB Samsung HDD.
I tried to install windows 7 on a boot camp partition with boot Camp assistant and also during the process, I
downloaded the driver helpers from apple website and burned it on dvd. after system restart, It starts to load windows
files and then asks me to give it the cd of drivers [ right after I select the country and language in the start of the setup ]
I tried to select the files of the cd [ which I burned by the boot camp assistant ] but it just keeps telling me there is
NO suitable driver matches my mac.
I have downloaded the genuine windows 7 and burned it on dvd.
Also I have Lion, Boot Camp 4.0.1
Can someone please help on this issue?
Many thanks,

The partition table needs to be repaired.
That is why the guide asks to backup before you begin.
Try Lion Recovery and check health of all the partitions.
Sometimes repairing or try shrink and expand the partition.
But it is not uncommon for what happened to you to render the drive with smaller HFS and then require erase the drive in some cases and restore.
Carbon Copy Cloner 3.4.2
Cloning as a Backup Strategy
CCC is now able to also clone Lion's Recovery Partition as well.
Check partition table health in Lion's Disk Utility
Create Lion Recovery Drive
Lion Recovery Mode

Similar Messages

Can I install Windows on my Mac without Boot Camp Assistant?

I was wondering if this was possible, or does Boot Camp Assistant format the hard drive in such a way that makes it possible for Windows to be installed, or can I just create a new partition myself and format it and install Windows without having to touch Boot Camp Assistant?

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

HT5628 i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks).

Cannot install Windows 7 32-bit using Boot Camp

I have one of the new iMacs (late 2012) and I can't install Windows 7 32-bit using Boot Camp. Whenever I try to being the installation using the Boot Camp Assistant, I always get the following message: "Need 64-bit Windows installation USB drive or DVD. Boot Camp only supports 64-bit Windows installation on this platform. Please use an USB drive or DVD which contains 64-bit Windows". I have successfully installed 32-bit Windows on my Macbook Pro that is running the same version of Mac OS X and Boot Camp, but I don't know why on this new iMac it doesn't allow me to. Apple's documentation states that I should be able to install either 32-bit and 64-bit without any problem, but this is not the case here. I can't find anything about this problem/error on the Internet either. HELP!!!

AidenT wrote:
Yes, circumstances do change but if Apple is, as they claim to be, serious about seamlessly migrating what is still a large and dominant market share of users from Windows, supporting 32 bit versions is not a nice to have, but a must have.
I don't see why users have to make excuses when there is a clear shortfall of what is promised.
In other discussions, there is talk of an opportunity for Apple to make a significant impact, as Windows 8 has deviated so much from the comfort zone of traditional Windows users. But to make that change, Macs have to support what is still a primarily 32 bit environment in the installed base.
As for the use of VMs, I had a tough time migrating out of Parallels 6 after an upgrade to Mountain Lion broke compatibility so IMHO it is not a long term solution unless you are happy to hand out $50 every 2-3 years just to support the same functionality.
Use Virtual Box, it's free.
32 bit may have a reasonable user base but it's going away fast, if you must use 32 bit Windows and won't use a VM your choice is limited.
Buy a PC, or buy an older Mac.
The rest of your post is speculative and I won't go there.

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

Install Windows XP 64-bit on Boot Camp.

Can I install Windows XP 64-bit on Boot Camp (Tiger)? Where can i find all the driver for 64-bit? Thank you.

Hi Amen,
XP 64-bit was never supported by Apple.
Therefor you are left to find the needed drivers all by yourself and for Apple-specific hardware you won't find any drivers at all.
Use the System Profiler in OS X to determine what hardware is in your Mac and then go to the websites for these hardware manufacturers to see/find drivers for XP 64-bit.
Personally I am not sure if all this hassle is worth the outcome.
Regards
Stefan

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

yeah I use a windows keyboard both in OS X and in windows on my imac I pref the split ms type of keyboard over the tiny apple keyboard and I pref the razor mouse so those are my main input sources in both yosemite and windows8.1

HT1338 I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for windows to complete installation it will hook at that stage please i need help.

I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for window to complete installation it will hook. the installation cannot be able to complete and i really install windows on it, please i need an assistance on how to go about it.

Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
Thanks to BobTheFisherman for the link.
There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
Give it a try. You might like it or it may not be your cup of tea.

I am having problems with downloading Windows Support Software by using Boot Camp Assistant. Is there somewhere else I can download from?

I am having problems with downloading Windows Support Software by using Boot Camp Assistant. Is there somewhere else I can download from?

No. There is no other location. Be patient. Read the posts in the Bootcamp Forum. There are hundreds of posts about your issue and what to do. https://discussions.apple.com/community/windows_software/boot_camp

Install Windows XP in Leopard WITHOUT Boot Camp - No More Disk Error

For those of you having problems installing Windows XP in Boot Camp because of the formatting screen never showing up and then the system restarting with the dreaded:
Press any key to boot from CD .....
Disk Error
Press any key to restart
I too spent many frustrating hours trying to find a solution that worked. I searched these threads, tried many of the solutions suggested here and elsewhere, including recreating the Windows CD without a specific file, using the FreeDOS boot CD (couldn't ever get it to work, though I understand some people have had success), Reinstalling Leopard and trying again, dancing around the laptop with incense three times counter clockwise while chanting the name of my childhood pet... etc.
I FOUND A NEW SOLUTION!!!! A much easier solution!!!!
For anyone who is having this problem and is planning to run virtualization software.
(Something that let's you run Windows from inside Leopard)
SKIP BOOT CAMP ALTOGETHER!!!
USE VMware Fusion to install Windows.
I decided to try a different approach entirely and did a completely fresh install of Leopard (not sure if that was necessary or not but with everything else I had been trying I wanted to clean it up anyhow) and then installed the 30 day trial version of Fusion w/ the unlock key VMware emailed me.
I entered my information and Windows product key into Fusion's "Easy Install" Interface, clicked install, and about 30 minutes later I was browsing around in XP.
I HIGHLY recommend this option for anyone having difficulty with the formatting screen not showing up. I have a Bachelors Degree in Information Systems and still spent the better part of 2 days working on this boot camp problem, including numerous hours with the higher tier of apple's tech support. I suspect that those of us having this problem may have an OEM or systembuilder copy of XP... but that is for Apple to deal with - not me, I have better things to do with my time.
If you are planning to run Windows from within Leopard anyhow, just buy Fusion and to **** with the hassle.
You can go to VMware's website and get a 30 day evaluation copy to see if this will work for you before you decide if you want to purchase it, they will email you the unlock key.
Best of luck, hope this saves someone some time!

For what it's worth, I've used the OEM version (copper disk), Select version (bulk license), and an NFR (partner program) version of XP Pro with SP2 and they all worked. On my MacBook Pro's I use boot camp to split the disk in two, reboot using the Windows CD, and pick the partition to format it.
Apple states that you need a full version of Windows, and the OEM versions are slightly different from the commercial versions, but both should work. On my Mac Pro, I created a 3-disk OS X RAID-0, and left the 4th disk alone. I rebooted with the Windows CD and installed Windows to the 4th disk without Bootcamp at all. Once Windows was installed, I used the Leopard disk to install the Bootcamp drivers. The Mac side has no Bootcamp installation but I can still choose between the volumes by holding down the option key at boot time or by setting the startup volume in the OS X Startup disk preference pane.
The solution to use virtualization, unfortunately, will not work for many situations where graphics are involved. Most current major products, such as AutoCAD, 3dsMax, and so forth, will not run properly or at all without specific DirectX 9 or OpenGL support. To date both Parallels and VMWare do not completely support DirectX or OpenGL.

How to install Windows? Missing checkbox in Boot Camp.

When I try to install windows 8 Boot Camp seems not want me to create an installation disk. The support pages show me some Boot Camp screen where one can choose to create an installation disk, but my Boot Camp does not show the same three options.
I cannot select "Maak een installatieschijf voor Windows 7 of hoger aan" (create installation disk).
If I prepare an USB stick with an Windows 8 iso myself and go on from there, Boot Camp seems not to recognize the Windows 8 iso, even if the Boot Camp help files are installed on the same stick.
What to do?
My Boot Camp assistant:

Thnx. My MBP has a built-in optical drive, so that explains the first screen without the option to create the installation disk.
So the problem remains to get Boot Camp recognize the installation disk. I tried to create an 8 GB (and after that even a 16 GB) installation disk on a USB stick and add the Boot Camp files to this stick. Next screen, Boot Camp still asks to insert the Windows Installation Disk. After that I burned the iso on a new DVD to be able to insert an original disk in the optical drive, but even this did not work out.
Today I called Microsoft to tell me whether I was taking the right steps, but this guy couldn't help me either. "I should not install windows in a partition, but I should use parallels to install it under iOS..." ?
The iso I have is an original disk image of Windows 8.1 Pro NL, meant to make a clean install. So what am I doing wrong?

How can I uncheck the option to 'download latest windows support software' in the boot camp assistant? The option to uncheck is locked

MBP 2013 Retina running OSX 10.9.2
I am trying to install Boot Camp using Boot Camp Assistant 5.1.2 (481)
I have a Windows 7 Pro ISO from MS.
When I open the Boot Camp assistant and try to create a bootable USB, it freezes on the 'downloading windows support software' part. I have tried multiple times.
I was able to download the latest support software from Apple, but no matter what I try I am unable to uncheck the box to download the software in the boot camp assistant
Ideas?

Me too have the same problem where i couldnt uncheck the 'download windows support software' option when im installing Windows 8 Pro (ISO in bootable USB 3.0) using Boot Camp on my MBP retina OS X 10.9.2.
And if i have to follow these steps, it takes too much time and im not sure if it will be finished or not (im stopping the process for i have waiting for at least 3 hours downloading). And im pretty sure my internet connection is doing good when downloading this thing. What's happening here?
Please help.

MANY issues after installing Windows XP Home Edition with Boot Camp

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: "This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?" When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: Some of these problems may not be specifically "Application" related, but the top one mainly is. (in my views)
~Twilight

Twilight:
Is it possible that you installed Windows XPSP1 instead of the required SP2? If yes then that is cause of all of your issues listed in your post. You have no sound and you cannot connect wirelessly because you still have been unable to install the boot camp drivers when you inserted the leopard disk.
Please double check to see which version of windows XP did you install. Remember, you need windows XPSP2 for all this to work.
Now, in the event that you installed XPSP1 then you will need to get to the microsoft windows site on a different computer and burn the Service Pack 2 for windows XP on a CD. After that boot your apple mac to XP side and insert the Service Pack 2 disk and install the pack. After that, it will ask you to restart the computer which you must and then once fully booted into XP then insert the leopard CD again and see if takes and installs all the necessary drivers.
Axel F.

Installing Windows 7 Without Using The Boot Camp Installer (MacBook Pro)

I don't know if anyone knows this or not, but I was able to install Windows 7 on my MacBook Pro just using the Windows 7 install disk.
I restarted with the windows CD in, and when the screen said press any key to boot from CD, I pressed the space bar. When it got to the part to select the installation drive, I went into advanced and removed all the partitions and formatted the whole thing. There was a small system partition the cannot be deleted (probably reserved for the system). I was able to install Windows 7 and use the whole drive for it.
After running Windows 7, I was still able to install the Boot Camp Control Panel to set the keyboard, track pad, sound, and all the other funtions. If I tell it to reboot to the Apple OS, it just reboots to Window 7 with no problems.
Anyway, I thought it was pretty cool and might be helpful for people who want to run only Widows 7 on their MacBook Pro.
CAUTION... DO THIS AT YOUR OWN RISK!!!

People have been using Mac as Windows-only.
On Mac Pro, with 4 internal drives, it is normal to not use anything other than the Windows DVD and install onto a dedicated drive, same as you did, only change it from GPT to MBR first.
There is no risk.
(Well, some feel that someone might 'need' OS X to do something like a firmware update I guess.)

Unable to install Windows 8.1 on Macbook using BootCamp Assistant

Hi, I own a Macbook Pro 13" Mid 2012 model.
I am trying to install Windows 8.1 on my Macbook using BootCamp Assistant, but i always get this error :
"No Bootable device detected, Insert Boot disk and press any key".
I've tried pressing the option key during boot to startup the boot manager and this is what i get :
I notice that the Windows boot disk doesn't show EFI Boot like it is supposed to when installing windows on a Mac.
I know this because I once had successfully installed Win 8.1 using BootCamp before on my MacBook.
However I'm not sure what the problem is this time.

On pre-2013 Macs, EFI installation does not work or partially succeeds, because these models are preUEFI models. The Late 2013+ models will support EFI boot correctly, without any driver issues. Your specific model supports installing from a DVD+USB or USB (I have the same 13" 2012 MBP).
You need to ensure that the USB device used is a USB2 and not a USB3 device. Please verify the integrity of the Windows ISO file (if used) using Microsoft FCIV tool. The same applies to the DVD. Do not connect any other external storage to your MBP. Do not use Alt/Option key to interrupt the BCA-initiated installation.
Using Alt/Option works when installing EFI-based on Windows, but you can directly boot into EFI installer from System Preferences -> Startup Disk -> EFI Boot Media.

Unable to install Windows 7 pro after restart by Boot Camp Assistant

Similar Messages

Maybe you are looking for