Unable to install WSUS role
Hi, I'm trying to install WSUS for SCCM purposes for SUP role. Here are the steps I did:
1. Install SQL Server 2012 with instancename: SCCM
2. Installed Configuration Manager 2012 R2
3. Trying to install WSUS but it always says that it requires a restart.
Tried to restart the server but same results. In installing the WSUS, I followed based on this instructions:
http://social.technet.microsoft.com/wiki/contents/articles/10020.installing-wsus-server-role-on-windows-server-2012-with-microsoft-sql-database.aspx
Is there something I'm missing in this?
Thanks
Jeff
Sorry for the late feedback, here's my situation right now.
At first I was having issues adding WSUS role in my machine, so what I did, knowing I might did something wrong, I format the whole server and reinstall the whole thing and here's my procedure.
1. Install OS: Windows Server 2012 R2
2. Perform WIndows Updates
3. Install SQL Server 2012
4. Install SCCM 2012 R2
When I tried to add the role WSUS again, it gave me the same error eventhough I already added the MSSQL$WID## credential into the "Log on as a service" BUT BUT here's the difference, inspite seeing this error message saying it requires a restart,
checked the WSUS services and it was disabled, tried to manually enabled it and start the service, I can see the WSUS inside tools and when I clicked it, it run the WSUS setup wizard and I was able to finish the setup wizard. It also showed me the WSUS GUI/Window.
Here's the weird stuff. Although it did setup the WSUS, since there's a pending restart from the adding of WSUS role, I tried to restart the server and after the restart, the role is gone again, as in the WSUS role is not on the tools, WSUS service is not
located under services anymore. So when I click on add roles again, it is not checked again for WSUS.
Regards
Jeff
Similar Messages
-
I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR -
Unable to install WSUS Updates KB720211 x64 and KB2734608-x64 on windows server 2012 r2 standard
Hi,
Am testing SCCM 2012 R2 in virtual environment. To handle Windows 8 clients, need to install KB2734608 update, which is failing.
Not able to install WSUS Updates KB720211 x64 too. The server is on Windows Server Standard 2012 R2 x64.
Any help will be appreciated.Hi,
Agree with Michael. KB2734608 is applied to the WSUS 3.0 SP2. If we install the WSUS on Windows Server 2012 or later, the version of the WSUS becomes to v6.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Unable to install Essentials Role on Windows Server Technical Preview (VHD)?
Hi
Having a problem trying to install Essentials Role on Windows Server Technical Preview (VHD)
After reboots, AD installs, I get Configuration encountered some issues in Results wizard.
Updating an preparing your server... 68% completed then it fails with following error.
"An error occurred while configuring Windows Server Essentials. Please try again."
Trying again same error.
Anyone able to get this installed?
TIAHi,
I did the same test without any problem.
You could try it again to check the result.
If it does not help, please refer to this kb article:
http://support.microsoft.com/kb/2914651
Regards.
Vivian Wang -
Unable to install WSUS 3.0 console
The installation program said that WSUS 3.0 console is not compatible with the OS. The WSUS server is running on a Windows Server 2008 R2.
Any suggestion?
Thank you.
CarloHi,
If you want to install WSUS console on Windows 10 Technical preview, please download RSAT tool from this link and it will contain the tool you would like:
Remote Server Administration Tools for Windows 10 Technical Preview
http://www.microsoft.com/en-us/download/details.aspx?id=44280
Kate Li
TechNet Community Support -
Hi.
I am having a strange problem with my SCCM 2012 R2 installation running on Windows Server 2008 R2.
I am not able to add any new roles to the server.
Event log reports: "Product: Application Web Service -- There is not enough available disk space on to complete this operation. Installation requires at least 10MB free disk space."
awebsvcMSI.log reports: "Product: Application Web Service -- Configuration failed."
and
"Windows Installer reconfigured the product. Product Name: Application Web Service. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 1603."
I have three disks in the server.
C: (OS) ~8.7 GB free space
D: (SCCM) ~7.69 GB free space
E: (data) ~52.4 GB free space
I have NO_SMS_ON_DRIVE.SMS files on C: and D:. I tried removing it from D: and restarting the server without any effect.
Does anyone have a solution to this?
Thanks in advance!
/MichaelThat error says the same as the event log:
"Action start 11:49:28: CcmCheckFreeDiskSpace.
MSI (s) (38:F4) [11:49:28:274]: Product: Application Web Service -- There is not enough available disk space on to complete this operation. Installation requires at least 10MB free disk space.
There is not enough available disk space on to complete this operation. Installation requires at least 10MB free disk space.
Action ended 11:49:28: CcmCheckFreeDiskSpace. Return value 3.
Action ended 11:49:28: INSTALL. Return value 3." -
Hi,
After running the prerequisiteinstaller.exe of SharePoint 2013 I am getting the below error in the logs
The tool was unable to install Application Server Role, Web Server (IIS) Role.
Web server role,application server role is already there in the server.
Ran the necessary power shell commands but still not able to proceed with this error.
Please share your inputs to cross over this issue.
Regards,
Sudheer
Thanks & Regards, SudheerHI Sudheer,Please check the link below that explains the solution for the same issues.
http://expertsharepoint.blogspot.de/2014/01/the-tool-was-unable-to-install.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
I have been banging my head over and over searching for the fix and nothing has worked. Google used to be my friend. I am having doubts.
Windows 2012 Server with IIS installed during the server creation using VMware Vshpere. Here is the log from the SP prep tool.
2014-06-23 10:13:12 - Processor architecture is (9)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Common Startup
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-06-23 10:13:12 - Trying to remove the startup task if there is any.
2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-06-23 10:13:12 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-06-23 10:13:12 - Locating the following command line arguments file:
2014-06-23 10:13:12 - C:\sp2013\PrerequisiteInstaller.Arguments.txt
2014-06-23 10:13:12 - Error: This file does not exist
2014-06-23 10:13:12 - Details of the current operating system:
2014-06-23 10:13:12 - Major version number of the operating system: (6)
2014-06-23 10:13:12 - Minor version number of the operating system: (2)
2014-06-23 10:13:12 - Build number of the operating system: (0X23F0=9200)
2014-06-23 10:13:12 - Major version number of the latest Service Pack: (0)
2014-06-23 10:13:12 - Minor version number of the latest Service Pack: (0)
2014-06-23 10:13:12 - Platform ID of the operating system: (2)
2014-06-23 10:13:12 - Product suites available on the operating system: (0X110=272)
2014-06-23 10:13:12 - Product type of the operating system: VER_NT_SERVER
2014-06-23 10:13:12 - Product type: (7)
2014-06-23 10:13:12 - OS type: (0)
2014-06-23 10:13:12 - Configuring the application's property sheet...
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Management Framework 3.0
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - PowerShellVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 4.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft .NET Framework 4.5
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - Install
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 4.5.51641
2014-06-23 10:13:12 - A post release .NET 4.5 is installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 6.1.7600.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-23 10:13:12 - Reading version of the following file...
2014-06-23 10:13:12 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-23 10:13:12 - The version is...
2014-06-23 10:13:12 - 1.0.3010.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 10.51.2500.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Server AppFabric
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCC
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheClient is Installed.
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCS
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheService is Installed.
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCA
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheAdmin is Installed.
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 2.0.1230.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft Information Protection and Control Client
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.0.959.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft WCF Data Services 5.0
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 5.0.51212.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - IsInstalled
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:19 - Beginning download/installation
2014-06-23 10:13:19 - Created thread for installer
2014-06-23 10:13:20 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\2\PreA98B.tmp.XML"
2014-06-23 10:13:20 - Error: Unable to install (2)
2014-06-23 10:13:20 - Error: [In HRESULT format] (-2147024894)
2014-06-23 10:13:20 - Last return code (2)
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - Flags
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - PendingFileRenameOperations
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-06-23 10:13:20 - Reading the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-06-23 10:13:20 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-06-23 10:13:20 - Last return code (2)
2014-06-23 10:13:20 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
command line options.
2014-06-23 10:13:20 - Cannot retry
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Management Framework 3.0
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - PowerShellVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 4.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft .NET Framework 4.5
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - Install
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 4.5.51641
2014-06-23 10:13:20 - A post release .NET 4.5 is installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 6.1.7600.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-23 10:13:20 - Reading version of the following file...
2014-06-23 10:13:20 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-23 10:13:20 - The version is...
2014-06-23 10:13:20 - 1.0.3010.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 10.51.2500.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Server AppFabric
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCC
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheClient is Installed.
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCS
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheService is Installed.
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCA
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheAdmin is Installed.
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 2.0.1230.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft Information Protection and Control Client
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.0.959.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft WCF Data Services 5.0
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 5.0.51212.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - IsInstalled
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:16:23 - Opening log file
2014-06-23 10:16:23 - Opened action for user
2014-06-23 10:16:23 - C:\Users\ADMINI~1\AppData\Local\Temp\2\prerequisiteinstaller.2014.06.23-10.13.12.logIt looks like you may have extracted the files to C:\sp2013. Can you try installing from a mounted ISO instead? Can you also validate that this is Server 2012 and not 2012 R2?
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Windows Server 2012 R2 running on Hyper-V VM. File services, App server & IIS roles installed
SQL Server 2012 installed
Tried:
kb 2765260 method 1 which is kb 2771431 which ends with "not applicable to computer"
kb 2765260 method 2 with no effect (this was power shell commands for PC's connected to the internet)
One post suggested "aspnet_regii - enable -i" but my OS doesn't have aspnet_regii on it (not sure what that implies)
One post suggested ServerManagerCmd.exe needed to be installed which sounds true as shown below (but where do I find this exe?)
There are some errors in the log file, I only included the portions where the errors are listed. The initial lines are at the top of the log file, then I skipped to the section where the other errors were. I can include the whole log if
it becomes necessary.
9:47:11 Processor architecture is (9)
9:47:11 Reading the following string value/name...
9:47:11 Common Startup
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
9:47:11 The value is...
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
9:47:11 Trying to remove the startup task if there is any.
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
9:47:11 Error: Startup task doesn't exist. This is not a continuation after a restart.
9:47:11 Locating the following command line arguments file:
9:47:11 E:\PrerequisiteInstaller.Arguments.txt
9:47:11 Error: This file does not exist
9:47:11 Details of the current operating system:
9:47:11 Check whether the following prerequisite is installed:
9:47:11 Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
9:47:11 Reading the following DWORD value/name...
9:47:11 IsInstalled
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
9:47:17 Beginning download/installation
9:47:17 Created thread for installer
9:47:17 "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\1\PreE0DB.tmp.XML"
9:47:17 Error: Unable to install (2)
9:47:17 Error: [In HRESULT format] (-2147024894)
9:47:17 Last return code (2)
9:47:17 Reading the following DWORD value/name...
9:47:17 Flags
9:47:17 from the following registry location...
9:47:17 SOFTWARE\Microsoft\Updates\UpdateExeVolatile
9:47:17 Reading the following string value/name...
9:47:17 PendingFileRenameOperations
9:47:17 from the following registry location...
9:47:17 SYSTEM\CurrentControlSet\Control\Session Manager
9:47:17 Reading the following registry location...
9:47:17 SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
9:47:17 Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
9:47:17 Last return code (2)
9:47:17 Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
9:47:17 Cannot retry
I'm presuming the first 2 errors are OK and just indicate optional startup modes for prerequisiteinstaller.exe
The 2nd set of errors seems more serious. I don't see ServerManagerCmd.exe on my PC that's listed in the error
I don't understand the last error which I'm supposing triggered the listed error even though there are other errors in the log.
Many of the existing posts don't match the configuration I'm using, and the ones that do match didn't seem to provide a usable answer. Any help is appreciated. Do these problems exist using Sever 2012 Standard? I will try that, but would
like to resolve the issue here with R2.
Thanks.
Best Regards,
AlanServerManagerCMD.exe is a deprecated utility and (as far as I know) is only found on Server 2008 versions, so I'm surprised it's needed for the preinstaller. Are you trying to install SharePoint 2010?
Running this page through Google Translate should give you an clearer idea on getting this installed.
http://blog.hand-net.com/sharepoint/2010-06-10-error-lors-de-linstallation-des-office-web-apps-2010-sur-windows-7.htm
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
When you try to install RDS role on server 2012 R2 using standard deployment, this issue may occur (Figure 1).
“Unable to connect to the server by using Windows PowerShell remoting”.
Figure 1: Unable to connect to the server by using Windows PowerShell remoting
First of all, we need to verify the configurations as it suggested:
1. The server must be available by using Windows PowerShell remotely.
2. The server must be joined to a domain.
3. The server must be running at least Windows Server 2012 R2.
4. The currently logged on user must be a member of the local Administrators group on the server.
5. Remote Desktop Services connections must be enabled by using Group Policy.
In addition, we need to check if the “Windows Remote Management “service is running and related firewall exceptions have been created for WinRM listener.
To enabling PowerShell remoting, we can run this PowerShell command as administrator (Figure 2).
Enable-PSRemoting -Force
Figure 2: Enable PowerShell Remoting
However, if issue persists, we need to check whether it has enough memory to work.
By default, remote shell allots only 150 MB of memory. If we have IIS or SharePoint App pool, 150 MB of memory is not sufficient to perform the remoting task. Therefore, we need to increase
the memory via the PowerShell command below:
Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000
Then, you need to restart the server and the issue should be resolved.
You can get more information regarding Remote Troubleshooting by below link:
about_Remote_Troubleshooting
If you need further assistance, welcome to post your questions in the
RDS forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.i found another possible reason, this solution worked for me:
http://oyvindnilsen.com/solution-for-powershell-remoting-error-it-cannot-determine-the-content-type-of-the-http-response-from-the-destination-computer/
I tried to set up powershell remoting on a server and kept getting this error:
Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client cann
ot process the request. It cannot determine the content type of the HTTP response from the destination comput
er. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help to
pic.
After a bit of troubleshooting I discovered that the problem was that the authentication packets was to big (over 16k), this will cause WinRM to reject the request. The reason for authentication packets getting too big can be because the user is member of very
many security groups or in my case because of the SidHistory attribute.
The solution was to increase the MaxFieldLength and MaxRequestBytes keys in the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP\Parameters
If the keys does not exists you can create them, be sure to use the DWORD type.
I sat MaxFieldLength to DEC value 40000 and MaxRequestBytes to DEC value 32768 and rebooted the server. Problem solved. -
Can I install WSUS alongside Windows Essentials Experience Role without killing IIS & Remote web access?
I have recently installed Windows Server 2012 Essentials R2, but I want to use WSUS on the same server. Is this possible, if so how? Last time I tried this I lost my Remote Web Access.
I did post this in the Windows server 2012 essentials thread but didn't get any replies so thought I'd try posting it here to see if I got any hits here?
Is there a way to get WSUS to install to different web ports i.e. 880 & 8443? Or can I get it to install in a new site in IIS? Its just I know that the Essentials Experience role sets up RWA in IIS and installing the WSUS on top just overwrites
the RWA site & settings? I assume this is also why Remote Desktop Services does the same?
Thanks
JK MCPCan I install WSUS alongside Windows Essentials Experience Role without killing IIS & Remote web access?
http://blogs.technet.com/b/sbs/archive/2013/06/25/how-to-install-wsus-3-0-sp2-on-windows-server-2012-essentials.aspx
Last time I tried this I lost my Remote Web Access.
Remote Web Access uses the Default Web Site. If you install WSUS to the Default Web Site, it will break things. Install WSUS to the alternate "WSUS Administration" site on port 8530.
Is there a way to get WSUS to install to different web ports i.e. 880 & 8443?
No.
Or can I get it to install in a new site in IIS?
Just select the option during the installer to do that.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Install issue of WSUS role on VMWare VM
Trying to put WSUS on a domain controller is a bad idea, for many reasons. Here's a good Technet Blog post that lists out a few of the reasons:
http://social.technet.microsoft.com/wiki/contents/articles/4236.guidance-about-wsus-on-a-domain-cont...
This is entirely unrelated to VMware, and would happen on other virtualization platforms or baremetal install servers.I am attempting to install the WSUS role to a VM on ESXI 5.0. I have made it to the progress bar and it seems to be stuck about half way. It was been this was for about 48 hours. I do not have an option to cancel or
-
Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS
Another user,
Cheer08, has replied to a thread you have subscribed to in the
SQL Server Express Forum.
Here are the error messages:
Error 2
Error 1
Hello,
This error is related to Microsoft Visual C++ 2005. Could you try to download and install Microsoft Visual C++ 2005 with service pack 1 (SP1) included:
http://www.microsoft.com/en-us/download/details.aspx?id=5638 (x86 or 32-bit)
http://www.microsoft.com/en-us/download/details.aspx?id=18471
(x64 or 64-bit)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thread Title Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS.
Started by: FenixRising
Reply:
Fenix, this is SQL Server forum. Regarding the Visual C++ 2005 SP1 Redistributable setup issue, you need to post question in
visual studio forum to get better help.
After installing Visual C++ 2005 SP1 Redistributable successfully,are you able to install SQL Server? If not, share us SQL Server setup logs. This link
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx will help you View and Read SQL Server Setup Log Files
Im going to run it now. Get back to you.Hi,
I am unable to install SQL Server 2012. I have the install log, but I don't can't read them.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2053898239
Start time: 2015-02-08 23:03:01
End time: 2015-02-08 23:07:31
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: RLC_WORK
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012
Client Tools Connectivity 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools Backwards Compatibility 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools SDK 1033
11.2.5058.0 No Yes
SQL Server 2012
SQL Server Data Tools 1033 Express Edition
11.2.5058.0 No Yes
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\76766b629842c4dc54646a47c04202\x64\setup\
Installation edition: Express
Slipstream: True
SP Level 2
Product Update Status:
Success: KB 2958429
Product Updates Selected for Installation:
Title: Service Pack 2
Knowledge Based Article: KB 2958429
Version: 11.2.5058.0
Architecture: x64
Language: 1033
Update Source: Slipstream
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, SSMS, ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: RLC_WORK\Robert
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: Slipstream
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\SystemConfigurationCheck_Report.htm
Fenix -
SCCM 2012 - Install WSUS Off Box SQL
Hi all,
installed SCCM 2012 R2 CAS on a 2012 server. The SQL is off box on a server cluster. I've installed WSUS through the 'Add Roles and Features'. I configured it to have local storage for the content and a remote DB instance
(called SQL1 on our cluster). All this worked well and the install completed as expected. I checked the SQL cluster and the "SUSDB" database was created ok.
As a final step, i went to Tools in Server Manager and launched Windows Server Update Services. This brought up the 'Complete WSUS Installation' dialogue box. I entered the exact same DB info as i had done when completing
the initial install of WSUS:
Yet when i hit 'run' the following message returns:
The relevant bit of logging is shown here:
2015-01-14 16:58:42 Starting service W3SVC
2015-01-14 16:58:42 Configuring IIS...
2015-01-14 16:58:42 Start: ConfigureWebsite
2015-01-14 16:58:42 System.Runtime.InteropServices.COMException (0x80070422): The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
So i guess i have two question;
1] is this Post-installation failure something i need to fix? (I presume it is)
2] If i do need to fix this to get sccm running properly, does anyone have any suggestions as to where i should start?
Thanks(for three forests which have no trust relationships).
That's not a valid technical reason to have multiple primary sites at all. ConfigMgr does not care about, use, or rely on domain or forest boundaries or client membership in any way for client management. Using multiple primary sites and a CAS will
significantly increase complexity and latency, will add additional points of failure, and will increase overall operational costs.
Concur with Jason here. CAS not needed. You can add in untrusted forests to the Configmgr Console so log as you have an account with permissions in the destination forest, extend the schema, create the system management container and open up any firewall
ports that are need for communication from site server to dc.
Neil Peterson has a great set of blogs on how to achieve this
http://blogs.technet.com/b/neilp/archive/2012/08/20/cross-forest-support-in-system-center-2012-configuration-manager-part-1.aspx
and ports are listed in this TechNet article under site server -- > Domain Controller. Ensure your RPC ports match the OS of the DC.
http://technet.microsoft.com/en-gb/library/hh427328.aspx
Final agreement with Jason - push to get that SQL local.
Cheers
Paul | sccmentor.wordpress.com -
WSUS Role on Server 2012 R2 fails - SQL Server Error "Schema Verification Failed SUSDB"
Server is Windows Server 2012R2
After installing the WSUS role with WID, when running the post installation task it installs the SUSDB in single user mode, runs all its scripts but then when it tries to set it it MULTI mode it fails with the error:
Schema Verification Failed SUSDB
If I log onto SQL Management Studio and try to set the database SUSDB to MULTI user mode manually it fails with the same error.
Detaching, deleting the susdb.mdf and .ldf files and re-running the post-installation task fails on the same error.
Uninstalling the WSUS and WID roles, deleting the C:\Windows\WID folder and reinstalling everything once again gives the same error during post installation.
Seems like a nasty bug.
Does anyone have any ideas? Perhaps there is a way to debug "Schema Verification Failed" errors in SQL Server?Hi,
If the WID can't access "C:\Windows\WID\Binn\DBVerify\SUSDBVerify.dll", this issue may occur.
Please change the account of WID to local system account in services.msc, then restart the WID service.
Then try to start the post-install again.
If issue persists, please check the detailed information of WID log.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
Weblogic Managed server not starting after installing OIM 11g
Hi All, I have installed OIM 11g successfully and I am able to start the WL Admin Server. But when I try to start the Managed Server for OIM (oim_server1), the screen just disappears and do not generate any logs. I haven't used the WL JDK while insta
-
Hi, I have installed the MSS BP 60.1. I have set up the necessary systems. When i click on any of the iviews , it shows a blank screen, where each of the Iviews is present. Previously i was getting the "Access denied" error, which i corrected by assi
-
Problems referencing a primary key field in a master-detail
Hello, I am making an application where I have a master-detail page. In the detail section it is possible to add new rows using the standard "Add row"-button that the wizard creates. The detail section has a column with a link in it. This link leads
-
Automatic determination of User Status in based on sales Stages
Hi All, Can we determine the user status of Opportunity document based on the completion of sale stages. can we do it in configuration itself or we need to go for development . Suggest some logical solution. Regards, Omer
-
Cannot check in files or undo checkout
Robohelp HTML 7.0 indicates that some files are checked out but when I try to check in it says: "Nothing to CheckIn, files are identical". When I try to check in from Robosource Control the same message appears. And I can't unCheckout as well. The sa