Unable to install Xcode 4.3.2 with Mac OS X Lion 10.7.4 (on my Mac mini)

I tried to install Xcode 4.3.2 from application store, after clicking the Install button, a message displayed as "Installing". (but no progress bar appeared)
After about 30 minutes, (while installation was on progress), my Mac mini crashed and I had to turn off the power and restart it again.
Now, if I try to install the Xcode again, nothing happens after I click the install button except the Apple store login dialog pops in and ask to login.
(No folder named "Developer" has been created in my Application folder yet)

Developer folder was not created anywhere, I had checked.
But, latter I found an icon named "paused" in the 2nd page of my Launchpad. When clicking installating simply started and completed without any problems.

Similar Messages

  • Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7

    Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
    I get the below error
    Could not find vsjitdebugger.exe
    Blogs say anti-virus is stopping but I dont have one on the system.
    Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
    Now i could not install both the software.
    Can I get some help regarding this?

    Hi Nandu,
    As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012.  If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
    in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
    Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
    To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
    http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
    1. You could execute the sfc /scannow command following steps below.
    a. Press "Windows+R", type in cmd and then right click "Run as administrator"
    b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
    c. Wait until the System File Checker finishes the check.
    2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
    3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
    4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
    In addition, if you are unable to install  Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup  . It is appropriate and more experts will assist you.
    Regards,
    Michelle Li

  • I am unable to install extensions, they show up with "will be installed after you restart Firefox" even after I restart.

    Hi,
    I am unable to install extensions, they show up with "will be installed after you restart Firefox" even after I restart.
    The "Staged" folder is present and remains after a restart, but the extensions do not get installed. They show in the extensions page with the "will be installed after you restart Firefox" message and remain like this no matter how many times I restart.
    Any Idea's?
    Running Firefox 24.0 on Windows 8.1
    Many Thanks,
    BD
    P.S. Just tried to install the "troubleshooter" add-on before posting the question and I got an error saying it cannot install because it cannot modify the needed file. (I did it manually instead)

    It is possible that there is a problem with the file(s) that store the extensions registry.
    Delete the extensions.* files (e.g. extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled or not compatible extensions in "Firefox/Tools > Add-ons > Extensions" then click the Tools button at the left end side of the Search Bar to check if there is a compatibility update available.
    If this hasn't helped then also delete the addons.sqlite file.

  • Unable to install itunes for new computer with windows 8

    unable to install itunes for new computer with windows 8
    states this app unable to run on this PC

    Hello jgrn76,
    It sounds like you are getting an error stating that the iTunes installer cannot be run on your computer. I would try downloading the 64 bit version of iTunes from here:
    iTunes 11.1.3 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    If issues persist when trying to install it, I would try running through the steps in the article named:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Otherwise, would you mind elaborating a bit on what the error message says, word for word?
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Unable to install KB2264107 on 2008 Server with SP2 X86 X64

    Hi All,
    Is there a reason why iam unable to install KB2264107 on sever 2008 with Sp2 ?
    I tried installing the  patch and iam getting This update does not apply to your computer
    Any troubleshooting steps for finding the fix for the same would really help me 
    Thanks In Advance !

    Hi All,
    Is there a reason why iam unable to install KB2264107 on sever 2008 with Sp2 ?
    I tried installing the  patch and iam getting This update does not apply to your computer
    Please let me know , this is really urgent 
    Thanks In Advance !
    maybe you already have a newer version of NTDLL.DLL installed?
    https://support.microsoft.com/en-us/kb/2264107
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • HT4407 Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?

    Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?
    My first thoughts were that 'bootcamp' was out of date...needed an upgrade to register windows 7. Since then I am once again met with the same problem... how can it not see the I have already have a paritioned drived ready to be used for installition, is there a way to fix this problem? I don't really want to pay out for 'i-parition' only to merge my 2 drives back into one and start again from scratch =/. Seems silly to do so...what are my options?
    Regards Swishi...p.s If anyone can help me...it'll make my day :3.

    ONE PARTITION.
    You don't need to buy anything but you should have backups.
    you can delete #2 you created. Then resize to full drive.
    There are already
    GPT
    EFI
    Mac
    Recovery
    and there needs to be Windows which cannot be higher ID
    Reading the instructions first and just swallow whatever pride or inidignation. It is a "my way or highwar" setup and utility,.
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    create a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
    https://support.apple.com/kb/HT4569
    Installation Guide  Instructions for all features and settings.
    Boot Camp 4.0 FAQ  Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ  Answers to commonly asked Windows 7 questions.
    http://www.apple.com/support/bootcamp/

  • Unable to instal Win 8 on iMac with Bootcamp & Win 7. Help please.

    Unable to install windows 8 on my imac with boot camp running Win 7. Instal gets reset to windows 7 with error message "unable to instal Win 8"

    V
    You need to go to the computer maker and get a copy of the OEM for your system.  YOu cannot download a non OEM and repair "it" with the OEM CD'S.  The cd's are probably for repair not install.  Does your system have a restore partition?
    Wanikiya and Dyami--Team Zigzag

  • HT1926 Unable to install iTunes update on pc with Windows 7 x64 bit

    Unable to install iTunes upgrade (11.0.1 on pc running Windows 7 x64 bit. Running old version of iTunes ok.  Have tried opening with new administrator but to no avail. Following download message that 'problems with installation'  and to tray manually.  Same outcome.
    Anybody got any ideas?
    Thanks
    Ian

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • Unable to unlock encrypted disk images created with Snow Leopard using Lion

    Anyone else unable to unlock encrypted disk images created with Leopard and Snow Leopard with Lion?  I know that they made changes with the release of FileVault 2 on Lion and Snow Leopard cannot use Lion encrypted disks but I thought it was backwards compatible where Lion should still be able to work with Snow Leopard created images (it was in the pre-release versions of Lion).
    When attempting to mount an encrypted disk image created with Snow Leopard on Lion the normal password prompt appears but then just reappears every time the password is entered and does not unlock and mount the image.  I'm positive the correct password is being entered and it works just fine when done on a machine running Snow Leopard.

    Not in cases when the computer successfully boots to one OS but produces three beeps when an attempt is made to boot it to another. If it really was a RAM problem that serious, the computer wouldn't get as far as checking the OS version, and it has no problems booting Lion. In the event of a minor RAM problem, it wouldn't produce three beeps like that at all.
    (67955)

  • Unable to install SQL Server Express 2012 with advanced services

     Unable to get file (SQLEXPRADV_x64_ENU) to execute (to start installation process).  I'm on Window7-64 - did move file from download area to its own folder within C drive.  Did find post about converting file to a zip (I'm using winRAR) but
    I only get AUTORUN text file with but will not unzip.
    [autorun]
    OPEN=SETUP.EXE
    ICON=SETUP.EXE,0
    Help  Thanks Brian

    Hello,
    Can you use below site to downloadSQL express with advanced services.1-3 G file is one you need to download .this would be direct executable file.
    http://www.microsoft.com/en-gb/download/details.aspx?id=29062
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Unable to install Xcode 3.2.6 on Snow Leopard 10.6.8

    I am trying to install the Xcode 3.2.6 on my Mac OS X 10.6.8.
    But I am getting stuck at the following:
    It says that there has been an unidentified installation error. Please contact Apple.
    Anybody knows what I am doing wrong?

    Thx for the reply brody.
    Indeed, I got the xcode_3.2.6_and_ios_sdk_4.3.dmg file from the apple site:
    Really have no idea what the problem could be.

  • Unable to install OS X 10.4 with external display

    My display died quite awhile ago (broken hinges, broken cables, etc etc) but since then I've used an external LCD display without problems. Once I set the display to mirror, everything has been working great.
    However, I tried to install OS X 10.4 and discovered that, after booting up from the disc, the install program wants to display everything only on the nonexistent original monitor. If I keep moving the mouse to the right, it eventually appears on my external monitor. But pressing F7 won't toggle back to mirror mode -- the toggle capability seems to be disabled or something.
    Any suggestions? Is there some way (hardware-based or maybe command line?) to tell the machine that the original display no longer exists and to only use the external display?
    Thanks for any help!

    Hi, llkohler. The limited-purpose OS on the installer disc that underlies the installer application and boots the computer probably doesn't expect to have its life complicated by a second monitor, and doesn't contain the code that would allow you to toggle the display mode. If I were you, I'd look to connnect the Powerbook to another Mac in Firewire Target Disk Mode (with the PB as the Target) and perform the installation on it from the host Mac. Once you get Tiger installed, you should be able to toggle the display mode on it in the usual way.

  • Unable to install Chrome on MacBookPro Retina, with 10.93/10.9.4

    I have had Chrome installed over many years and Operating systems.
    Something has happened and I am unable to update or install Chrome.  I have used all online instructions on how to remove all traces of Chrome from the Harddrive, used "AppZapper" etc, and have apparently no residue.
    I download the latest version of Chrome, but when i try to access ANTHING, I get the SadSack "Aw, Snap!" error message.
    Not one menu item displays without this.  I have tried the Google Forums, but receive no help/guidance at all.
    Any suggestions?  Peter

    Thanks Loner T!
    Great suggestion!  I now have data!
    In the system.log, there is a detailed track of the issues, all from today.  I now have the ammo to talk to Google directly.  My company uses GoogleApps and I know I can try to get support there.
    Best, Peter

  • I am unable to install ios8 to an iphone with 8gb storage capacity

    my wifes iphone 5c will not install ios8 even though she has deleted 95% of her storage usage????

    Perform the update using iTunes on her computer.

  • Unable to install an Adobe AIR application with -location to correct path

    Hi
    Im trying to silent install an air app on the command line (Windows).  But the path i use after -location is ignored.
    This is the code im using:
    "C:\Program Files\Common Files\Adobe AIR\Versions\1.0\Adobe AIR Application Installer.exe" "-silent" "-location" "C:\Program Files\my_app_name" "C:\Program Files\my_app_name.air"
    What ever i add after -location isnt used and it gets added to the default location.  Has anybody else found this?
    Thanks
    James

    Thanks and see this article, the detail is not what is the command that allows me themassive installation of AIR application.

Maybe you are looking for