Unable to install XP Pro sp2 on K8M890M2-V (msi-7139)board

Hello all,
Well first time for everything but I am at a loss. everything is new Board is new, chip is a Athlon64 X2 3800, 1 gig DDR Ultra, ATI 1650 pro PCIE, 2 WD250 SATA in Raid 1 jumpered to 150 mode. 1 DVDRW Samsung as master on the ide bus and of course a floppy. Bios version 5.1
Bios is set with Sata to RAID
power supply- for once I kept the one with the case
450W
+3.3 +5 +12 -12 -5 +5sb
26 35 15 .8 .5 2
I post with no issues, can get into the bios, will even go as far as a stop because of no operating system loaded if I let it.
But if I try to install windows XP Pro SP2 Windows stops at -
Setup is Inspecting your configuration
I have:
Removed and replaced all parts individually with reboots after each step with the same result
Replaced all parts (except the CPU and MB) individually with the same result ( yes I had spares)
Removed the vid card and run with on board VGA with the same result
followed the steps on the MS website dealing with the issue with the same results - Bios was already at 5.1 so could not update
I am unsure what other options i have left at this point
Kind regards
javascript:void(0);
bonk

Get a decent PSU with single rail, that means only one +12V line on the PSU, and to have high amperes on the 12V line 30A or more are recommended.
Look here as well:
PSU's---2 x 12v---The Dual Rail Myth
Is your problem caused by your PSU?
Good suggestion can be found here:
https://forum-en.msi.com/index.php?topic=111097.msg827745#msg827745
https://forum-en.msi.com/index.php?topic=111616.msg831994#msg831994
https://forum-en.msi.com/index.php?topic=103299.msg757739#msg757739
https://forum-en.msi.com/index.php?topic=105635.msg783148#msg783148

Similar Messages

I want to install XP Pro SP2 on a Mac Mini from a 2003 RIS server.

I want to install XP Pro SP2 on a Mac Mini from a 2003 RIS server. Is this possiIble? How is it done?
The mac has 10.5 which has bootcamp to enable Windows install. I have created a partition but the bootcamp utility asks for a CD. I want to install a RIS build. The Mac has a option for network boot but this seems to only work with Mac Server. I assume the network adapter is not PXE compatible and so a boot disk of some kind will be needed to kick this off?.

Hallo, I installed the program as you said. Everything ok.
When i have to give my serialnummer, it is not accepted. Code is not valid he said
1160-4008-7475-7547-5706-0812
Op 21-sep.-2014, om 17:44 heeft Rikk Flohr <[email protected]> het volgende geschreven:
Hi, I want to install my lightroom version on a new mac pro. How do i get started. Can't find it on this site. Thx
created by Rikk Flohr in Photoshop Lightroom - View the full discussion
www.adobe.com
Hit the Download link at the bottom the page.
Hit Lightroom
Hit Free Trial
When you are done downloading, launch, and enter your serial number from your previous installation.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6749435#6749435
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Re: Installing WinXP Pro SP2 / Boot Camp - Drive Bay 2 - which partition?

I am stuck and I can't seem to find the answer through Google searches.
I have a Mac Pro and I am working on installing WinXP Pro SP2 on a second SATA drive. It is a 500gb drive by Western Digital and it happens to be the same size as the Mac OSX drive - 500gb.
Because they are alike in size I can't tell which is which in the installer. Here are my options:
476938mb Drive
H: Partition 1 (Unknown) - 476938 free
476938mb Drive
I: Partition 1 (Unknown) - 200mb free
C: Partion 2 (Unknown) - 476938 free
My guess is to install WinXP on the H: partition and I just want to confirm this as I don't really wish to wipe out my MacOS on the drive in Bay 1.
Can anyone confirm this? I wished this was addressed in the Boot Camp Installation Guide. They only address one drive that is partitioned, not two seperate drives. Also nothing listed shows up with the label BOOTCAMP.
Thanks in advance.
Rob

Pull your OS X drive.
XP and Vista 32-bit only give you 1.9GB of RAM.
If you don't need native access or 3D you might just want to later use it with Fusion, VirtualBox or Parallels.
Apple uses GPT (GUID) which creates those small 200MB and 128MB partitions you see that are essential.
For me, I would just format the drive as MBR, and FAT/MSDOS or if you have NTFS from MacFUSE or Paragon, format as NTFS (preferable), and pull OS X and then install.

Unable to install Premiere Pro update 7.1

I've been unable to install Premiere Pro update 7.1 on a Mac running Mavericks. I've made three attempts over as many days.
For what it may reveal, here is the install log. Any ideas?
[Please don't post full longs to the user forum.]

Try using the "adobe cleaner tool" (you'll find it online) to uninstall Premiere Pro. Reboot. Install Premiere Pro with the creative cloud panel from the apps list. It should work fine

Unable to install Acrobat Pro 6 Upgrade on Mac Mini single CPU, OS 10.4.5

I have a Mac Mini (1.5 GHz, Intel Core Solo) with 512 mb RAM running OS X (10.4.5)
Unable to install Adobe Acrobat Professional 6 upgrade because I am unable to install earlier version full version (I own Acrobat 4 and 5 full versions). Finalizing install of 6 asks me to "Manually identify prior install", "Search hard drive for prior install", or "Manually locate on orig. CD". None of these options are possible (Version 5 CD is not a drag-and-drop app). How do I work around this?

I tried "Manually select..." but when I insert original CD of Acrobat 5, I'm not able to select it. Version 5 is not a drag and drop install,...i must click on the installer to install 5.

K8T Neo2 - SATA problem when installing XP pro SP2

hardware
MSI k8t neo 2 with athlon 3200+
2*512MB corsair and no name
ATI radeon 9200
HDD maxtor 200GB and HDD samsung 200GB
The mainboard offer 2 sata controller, but i can't success to install windows on,
1) If I use the promise fasttrack sata controller :
I boot from my xp installing CD, hit F6 and load the drivers from the floppy drivers, I choose where installing xp, and when he start to copy the data he ask again the ftsata2.sys load from the previous floppy disk drivers, and here he refuses to copy the file(but he is accessing to the floppy).
I'm stuck here because without this ftsata2.sys files he refuses to continue the process.
2) If I use the VIA sata raid driver :
first, he found only one HDD the maxtor.
I boot from my xp installing CD, hit F6 and load the drivers from the floppy drivers, but there the process stop because he cannot found the HDD.
PS: sorry for my English, I'm french speaker but not french, (Switzerland ) x)

Quote from: Hans on 06-January-07, 17:14:20
Yep, I agree.
But: what are you trying to set up? Are you trying some RAID with these drives? If so, it is preferable to use two disks that are the same size (you have that) but also the same make and model.
I'm just trying to install windows xp sp2. I don't use any raid settings.

Why am I unable to install Premiere Pro and After Effects

I have been all through that on the live chat. There is no solution it appears. i am paying a subscription for what i am now unable to use. Even the free trials it wont let me down load on my laptop. I tried on my desktop and it will let me sign into the application manger in creative cloud but half the software is missing. Premier Pro and After effects ( these were the main reason for me doing the subscription). It let me download Photoshop as the free trial which is annoying as i'm paying for it. I tried entering the serial number which said invalid. In answer to your question I am a home user.

Branching this message out to a separate discussion. If you are missing the option to install After Effects and Premiere Pro then it is due to your computer not meeting the minimum system requirements. Please see the system requirements for each application:
Premiere Pro - http://www.adobe.com/products/premiere/tech-specs.html
After Effects - http://www.adobe.com/products/aftereffects/tech-specs.html

Unable to install officejet pro k550 in windows 7

Driver failed to install. Have also tried info from this page http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02663702&lc=en&dlc=en&cc=us and still cannot get printer to install. Either as a network or when connecting via USB. USB printing gets installed and is ready and working but not the printer driver. I am doing everything on the Win 7 laptop as an administrator. I've installed Dell, Lexmark and an HP Color LJ CP1215 with out any problem but not this officejet pro k550.

Hello jm092749.
Welcome to the HP Forums.
I understand you are seeing a "MSVCR90.dll is missing" error when trying to install your printer. I will do my best to assist you with this.
This issue can be hardware or software-related. I located a complete guide to troubleshoot this issue. If you follow the instructions in order, you should be able to resolve the issue: How To Fix Msvcr90.dll Not Found or Missing Errors
I believe the issue will be resolved after following these steps. If not, the computer is facing a hardware issue, and will likely need to be repaired. Either way, please post your results. If this was the information you are looking for, please mark this post with an Accepted Solution and Kudos. Doing this will allow others to locate this information easily.
Thank you for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Unable to install Officejet Pro L7590 print driver in Windows 8.1

I have lost days of time trying to get my OfficeJet Pro L7590 to print properly and otherwise operate in a stable manner. My computer is a new Dell XPS8700 running Windows 8, upgraded to Windows 8.1 via the "Store" app after purchase. My problems started soon after the 8.1 update.
The primary problem symptom is the printing of about a half page of text fine, then the printer spits the page out and prints several more pages of mostly blank paper with random symbols around a top or side edge. This occurs regardless of the program doing the printing, i.e., MS Word, Excel, Acrobat, etc.
I have run the Printing Doctor program many times which doesn't fix anything, despite its claims to the contrary (more below).
I have been on this forum many times and tried multiple instances of uninstall/reinstall without success. The HP Installer may make it through the whole installation process but unstable performance of the printer is the outcome. Uninstalling the printer software using HP's uninstaller ALWAYS crashes before it can finish uninstalling. I get a message of "HP Installer Uninstaller has stopped working". I would attach a screenshot here but I does not seem an option in this window.
I have run multiple versions of HP's scrubber programs which also crash by level 2 with same message. I still ran L4 regardless but that crashes, too. That's the constant of every uninstallation or scrubbing effort using HP's programs: a crash without an error message given beyond the "HP Installer Uninstaller has stopped working".
I run the Printer/Scanner Doctor tool when the software was malfunctioning and it always finds a Print Spooler problem, "fixes" it but the problem remains. This posting is coming after the "Doctor" tool told me to uninstall the program. HP's uninstaller crashed, as usual, but the I was told to use Windows Add/Remove programs to finish the job. I did. I have not tried to install the program again and am becoming close to 'Refreshing' my entire Windows program, which will require reinstalling and updating Windows and every program I use - which will take days. I hope to avoid that step.
Dell's hardware analysis utility tells me everything hardware is great!
I truly believe HP's software IS THE PROBLEM and would love to figure this out. The printer has always worked great - until the Windows 8.1 update. The scanner will work fine (usually) after I reinstall the software. I used the printer before on my prior computer running Windows 7 with no trouble.
Going into today's crash info, via Event Viewer, I have this message from the error log:
Application 'C:\Program Files (x86)\HP\Digital Imaging\bin\hpqbam08.exe' (pid 3960) cannot be restarted - Application SID does not match Conductor SID..
And this error occurred just after:
Faulting application name: svchost.exe, version: 6.3.9600.16384, time stamp: 0x5215dfe3
Faulting module name: combase.dll, version: 6.3.9600.17031, time stamp: 0x53087867
Exception code: 0xc0000005
Fault offset: 0x0000000000005fc4
Faulting process id: 0x1284
Faulting application start time: 0x01cfe34585c8f1c4
Faulting application path: C:\WINDOWS\system32\svchost.exe
Faulting module path: C:\WINDOWS\SYSTEM32\combase.dll
Report Id: a118ba71-4ff5-11e4-bea6-34238711e0a0
Faulting package full name:
Faulting package-relative application ID:
There was an earlier - about 30 minutes earlier - warning saying:
The application (HP Solution Center, from vendor Hewlett-Packard) has the following problem: To function properly, HP Solution Center must be reinstalled after you upgrade Windows.
I have reinstalled it many times. I have used HP's installation & uninstallation utilities, including the Installation failure utility, none of which install the program properly, CERTAINLY not well enough that I can EVER uninstall it without a crashed uninstallation per description above...
I think I have reviewed and tried every "canned" HP quick solution, and not so quick solution, on this forum.
Comments?
Richard_L

Added Info for original posting:
Windows 8.1 64 bit OS. Dell box shipped with Windows 8 and upgraded to 8.1 via the Windows store. As stated in original post, computer is Dell XPS 8700, I7 cpu with 16 gbs of RAM.
Happy to answer any more specific questions.
Richard

N9A2 Platinum, Installing XP Pro, SP2, Cannot find SATA Hard Drives

I am lost here. I cannot get the bios to recognize the HDs as SATA drives, and XP Pro does not find the HDs (of course), and I do not know why. Do I need a SATA driver floppy for the Install Win drivers <f6> ? I thought not from the other threads here. I am not using Raid.
I have downloaded and read the manual from the support site, Support knowledgebase and every thread that I could find here in this forum.
My setup is the N9A2 Platinum, V1.
Bios v 1.4, 3/112/08
Phenom X3 720
Ultra 750W power Supply
Seagate 500GB SATA HD
WD 80GB SATA HD (for Photoshop scratch drive)
My Bios is set up as follows>
Integrated Peripherals
Extra RAID Controller - Disabled
On-Chip ATA Devices
PCI IDE Busmaster - Enabled
RAID mode - IDE
OK, Any ideas? You folk have a lot more experience with me. Thanks for all/any help.

Ports 5 and 6 ,the red ones ,are for the Promise Extra RAID controller ,which as per BIOS settings was turned off ,thats why the HDD was not detected .You can use that Promise controller with HDD-s ,even if they are not in RAID config ,but drivers are required.
Glad i could help you!

Unable to install OfficeJet Pro 8000 firmware upgrade BZM1FN1006BR

My OfficeJet Pro 8000 A809n has the original firmware, 0842BR. My understanding is that the upgrade to 1006BR will address some issues I'm having with paper handling and network connectivity.
When I use the HP Download and Install Utility (DAIU), it downloads the firmware download utility (HP Officejet Pro Firmware - OfficejetPro8000_R1006BR_ENG.exe) to my hard drive. However, when I use the "Install" feature, I get this error:
"Firmware Download Utility has stopped working A problem caused the program to stop working correctly. Please close the program."
I've tried to run the software directily from my hard drive as well but it gives the same results. Some have reported that the issue may be related to running firewall software on my laptop (Lenovo W530 with Windows 7 64-bit) but I get the same problem when I disable Symantec Endpoint Protection.
I would appreciate any help in resolving this issue!

Hello there
I have some more suggestions for you! I would first suggest printing out a test page, see the below image for instructions on how to print out a quality page. I ask you to try this to see if the printer will produce a test page from the unit itself (without involving the computer). Basically, this makes sure the printer is in good working order before we continue software troubleshooting. If this page prints, continue the steps below the image, if not, let me know!
Also, please let me know some more about the paper handling and network connectivity problem you have been facing. Ex: Does the printer loose it's wireless connection? Will it not pick the paper and feed the paper through?
Source
Software troubleshooting if the printer printed a quality page fine:
Run the Microsoft Fix it tool here, to uninstall the printer: Fix problems that programs cannot be installed or uninstalled
Restart the PC.
Perform a Clean Boot again and restart the PC afterwards.
Disable any firewalls and anti-virus.
Run the installation again.
Happy Wednesday!
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Unable to install premiere pro cc 2014

Hello,
I am running OSX 10.8.5
3.4 GHz Intel Core i7
16 Go
I already have Premiere Pro CS 6 installed and would like to test CC 2014, without deintalling the previous version.
Via Adobe Creative Cloud, I cannot install it..... I verified the permissions, as recommended, but everything seems allright...
What is the problem ? How can I test CC 2014 ?
Thank you

It seems to be working now, the software is downloading.
It seems I just had to update Creative Cloud.
Thank You !

If I install XP Pro-SP2 do I need to install the AMD64 CPU driver?

I thought I read somewhere that the XP with SP2 disc now comes with the AMD64 CPU driver. Is this true and if so do I forgo installing the AMD Athlon 64 Processor Driver v1.1.0.18?
thanx

Quote from: Supershanks on 24-March-05, 04:20:36
AMD64 CPU driver is included with SP2. (v5.1.2600.0)
luck
No ('C'n'Q)

Unable to install Officejet pro 8600 printer on work network using HP software on Win10

I have recently updated my Surface pro 3 to Win 11. I am trying to install my printer using the HP setup software. This had worked with Win 8.1. The software was never able to detect my printer automatically but in the past I could enter the IP address and it would connect. This is not happening, when I select wired connection, it just fails never giving me the option to enter the ip address. I can install the printer using the W11 control panel but the Scanner features if the HP software (HP printer assistant) will not work this is frustrating for me. Please help.Regards,Michael

I found the solution to this problem. You just need to run the automatic install wired function twice and then it will ask for the IP address. Once I did that and entered the IP address it worked fine. It just should be an option to begin with or show up after one failure. The fact that I had to let it fail twice was confusing.Michael

Error message when installing XP PRO SP2 on MAC PRO

I have used BootCamp Assistant (in Leopard 10.5.1) to create a Windows partition on an internal 500GB disk (not the one with OSX on it). When I put in the install disk it starts loading everything in preparation and when it gets to "Starting Windows" I get this message on the typical Windows blue screen:
XXX STOP: 0x0000007E (0XC0000005, 0XF748E0BF, 0XF78DA208, 0XF78D9F08)
XXX pci.sys - Address F748E0BF base at F7487000, Datestamp 3b7d855c
I have unplugged everything except for the Studio Display and am using wireless keyboard and mouse.
Please, please advise because I need to use my community colleges online course material but they don't support MAC and this is the perfect answer for me to not have to buy another computer! I'm a die-hard MAC user but I must say thanks in advance!

It comes up saying error in boot camp installer and then a window comes up saying the installer finished and did not complete (or words to that effect). I have copied the latest bootcamp installer updates to a usb pen and tried to run the file then but it doesn't seem to work. Frustrating thing is that all runs fine in vm ware fusion

Unable to install XP Pro sp2 on K8M890M2-V (msi-7139)board

Similar Messages

Maybe you are looking for