Unable to integrate BRFplus (NW 702) with NWBC
Dear Gurus,
I'm finding it hard to integrate BRFplus into NWBC. I have added the BRFplus related roles for the my ID. Within NWBC, each time I click on BRFplus, it popups up BRFplus on Internet Explorer.
How can BRFplus be viewed within NWBC? Am I missing some pieces?
Thanks,
Ajay
Hi, Ajay
NWBC is used for calling Web Dynpro applications. You can use any standard rol like SAP_FMCA_CA_ALL_EHP5_TRM_NWBC
to see examples of Webdynpros....
To run rhe BRFplus application you'd need to configure, at least, the following objects:
- Form Bundle type, revenue type and form scenario.
Configuring Form Bundle type you can specify the BRFplus application to be usedfor processing the form bundle type....
Web dynpro Appl. FMCA_WDY_FPF allows you to call your Form Bundle Type and run the BRFplus application.....
Asall of these tasks requires deep knowledge of Tax and Rev. Mgt I'd suggest to read carefully the SAP help documentation or contact with a TRM expert.....
I hope it should be useful....
Kind regards
Similar Messages
-
Unable to integrate Oracle Reports with Express--(To oracle Team also)
Hi
Unable to integrate Oracle Reports with Express. While defining
the Express database connection using the olap connection editor
iam getting the following error "Error locating the XCONEDIT.INI
file. Try re-installing the software".
what should be done?
Atleat,If anybody has successfully connected to Express via
Reports6i. Kindly give the details like what softwares to be
installed in what HOME? and also other steps involved in the
process.
YOur help !!!
kindly respond...(Oracle Team do respond with something)
with rgdshello,
check out the notes
Note:112542.1
Note:167049.1
on oracle metalink for further information.
if you still have issues, please contact oracle support services
for furhter assistence.
regards,
the oracle reports team --pw -
Unable to Integrate UCCX 9 with SocialMiner 9
Hi All,
I am unable to integrate the UCCX with the SocialMiner as the error message is "Unable to communicate to the SocialMiner on the IP address(Hostname) provided. Please verify whether SocialMiner is running on this IP address(Hostname) or check the network connection and make sure that SocialMiner is reachable from CCX".
As the SocialMiner is running on this IP. Please guide me.
Regards,
Durraze Khan
UCCE Support EngineerHi All,
After doing the latest patch for the SocialMiner i have integrated the UCCX 9 with the SocialMiner 9 now i am able able to Pull the agents from the Active Directory to the SocialMiner Please guide me that how to rectify this issue, looking forward to hear from you.
Best Regards,
Durraze Khan -
Unable to integarte Oracle business rules with BPEL
hi'
I am unable to integrate Business rules with BPEL, I am using JDeveloper to do this.
I have successfully made a connection to rule repository and using decision service in synchronous BPEL process.
In the decision service wizard step 1 of 2
1.) Selected 'Execute Ruleset' in Invocation pattern
2.) Selected rules set which I have cretead before.
the problem is coming when nothing is geting displayed in the
window below for Fact name, assert name, watch fact.
please help me why Fact name, assert name, watch fact are not coming.
thanks
YatanThanks Anirudh,
Do I need to make some changes in the java classes or in the XSD file which I am importing while creating new BPEL process
I am importing the same XSD file in input and output, actually I am updating the database in the BPEL process so I am taking the
input from the payload and updating the DB.
Do I need to make two different <complexType name="updatingDB"> and <complexType name="businessrules">in the XSD
if you have some example which shows the Integration of BPEL and Business rules
with Java facts please share it with me.
thanks
Yatan
Edited by: user10681871 on May 25, 2009 11:51 PM
Edited by: user10681871 on May 26, 2009 12:02 AM -
How to integrate flex 4 SDK with Flex builder 3
Hi,
I am trying to integrate flex sdk 4 with flex builder 3 but I am unable to run the code and as well as I am unable to see the design screen while creating.
Can anyone please suggest me how to integrate sdk 4 with flex builder 3.
Thanks,
SriSo you've unpacked the SDK, added it in the list in properties, and confirmed your project is using the new SDK, right ?
If you create a brand new project with a simple file in, exactly what happens ? -
Integrate intelliJ 4.0 with weblogic 7.0
hi gurus:
I tried to debug ejb or data access objects in wls inside intelliJ IDEA IDE
ver 4.0. But because our application has customized config file and classloader,
based on integration docs on intelliJ website I was unable to integrate wls and
intelliJ. I'm wondering any of you has similar experience? I greatly appreicate
any suggestion. The restarting weblogic server is just way slow for debugging.
yingThanks a lot for your replay.I do agree with your statement.
But I am assigned to do this task. All I know is, it is possible to deploy an application in JBoss using Websphere Application developer. -
Unable to edit document using "Edit with Word" option
Hi All,
i am having an issue with Office web apps. i am using SharePoint 2013 and Office web apps 2013. all the configurations have been done successfully. but i have a different kind of issue.
i am able to open documents in browser
i am able to edit document using " edit with word/excel web" option
but i am unable to edit document using "edit with word/excel" option
i have Office 2010 installed on my local machine.
do we need to have MS office of 2013 version? or is there anything missing from configuration part.
Please help me.
Thank You,
Bhaskar.Hi,
According to your post, my understanding is that you could not use the "edit with word/excel" option.
I had tested the issue with the Office 2010, the option worked well.
You don’t need to install the Office 2013 to use this option.
What did you mean “but i am unable to edit document using "edit with word/excel" option
Did you mean the option gray out? Did the issue occur in other browsers?
You can use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
You can also add the site into Trusted sites.
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
What's more, you can also use other browsers to check whether it works, such as Firefox, Chrome.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Integrate BW 3.5 with EP 7.0
If someone can help me resolving this issue that if we can integrate BW 3.5 with EP 7.0. If yes, then would like to know the steps involved in this integration.
Thanks
MonaThe Portal capabailities of SAP NetWeaver 2004s (or EP 7.0) is backward compatible with SAP NetWeaver BI 3.5. Therefore the SAP NetWeaver Portal 6.0 documentation should be applicable.
Making Settings for SAP BW 3.5 and SAP EP 6.0 (SAP Library - SAP Business Information Warehouse (BW))
http://help.sap.com/saphelp_nw04/helpdata/en/ab/9659400d9d1059e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6b1472a7-0301-0010-64bd-dc96509db6f7
Hope it Helps
Chetan
@CP.. -
I am so angry at messages because when i am trying to sign in, they want my email adress. when i put my email adress it says unable to verify adress. an email with a verification link has been sent to the above email adress. I did that like over a billon times and i am so desprate to talk with my friends. please please help this is really troubling me. i even tried to put in my apple id and still didn't work all it said check mail but i delete it. plz plz help
The message you go says that Apple sent to the email account you used an email to verify your email account. You have to open up that email message and then click on the link inside to complete verifying the email address.
-
Unable to charge my Ipad 4 with my Laptop (HP 7010tx) USB . I am Getting error message as "Not Charging" . Please give a solution for this ...???
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
Unable to connect to Wi-Fi with password
Hello,
I'm having a slight issue with an iPod and iPad. As the title says, I'm unable to connect to wi-fi with password encryption (WPA2). I don't understand why! I can connect to wi-fi when I take the password encryption off. I've been able to connect to wi-fi previously with password encryption enabled. I live in a complex with three other neighbors. I'd prefer to not leave the encryption off. Does anyone have an idea as to how to solve this problem? I've already tried restatarting the iPod and restarting the wireless router. I tried to forget the network as well on both devices and reconnect them, however, when I try to reconnect them it tells me "unable to connect to the network". I do not wish to do a factory reset for either devices. Also, I'm unsure whether this is related or not, but I just updated my software recently to OS 6.1.2 ...my problem began a day after doing so.
Any feedback would be much appreciated! Thanks in advance. 8]
I have a Netgear WNDR3400 wireless router.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
I would try another encryption but still use encryption. Also try changing the PW.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
How to enable Billing plan tab in sales order (lean) with NWBC
Dear All,
The Billing plan tab in sales order (lean) is not availabe with NWBC. How to enable this tab?
Is there is any documentation to do the modifications of NWBC's webdynpro screens?
for example, there is a standard webdynpro screen in NWBC from SAP best practices to create sales order (lean). The lean sale order screen having restricted elements and tabs when compare with standard SAP GUI (t code va01).
So I want to include the few missing tabs for data entry.
any documentation or solution?
thanks in advance,
Suresh Yerra.Dear All,
Is there is any documentation to do the modifications of NWBC's webdynpro screens?
for example, there is a standard webdynpro screen in NWBC from SAP best practices to create sales order (lean). The lean sale order screen having restricted elements and tabs when compare with standard SAP GUI (t code va01).
So I want to include the few missing tabs for data entry.
any documentation or solution?
Thanks,
Suresh Yerra. -
I am unable to upload Quicktime movies made with imovie to the web. I've tried using Filezilla (which worked well until recently) or even going directly to the webhost via Cox (my internet provider). The upload always gets caught in a loop. I have repaired permissions. I've been successfully uploading movies each week to my church website (or intermediary like Filezilla) for over a year. I cannot figure out why I'm no longer successful. Your feedback is desired and welcome. nojo99
I am unable to upload Quicktime movies made with imovie to the web. I've tried using Filezilla (which worked well until recently) or even going directly to the webhost via Cox (my internet provider). The upload always gets caught in a loop. I have repaired permissions. I've been successfully uploading movies each week to my church website (or intermediary like Filezilla) for over a year. I cannot figure out why I'm no longer successful. Your feedback is desired and welcome. nojo99
-
I am unable to get beyond the "sync with iTunes" splash page after connecting my iPhone; every tab is grey. What gives?
Is the computer the one the device normally syncs with?
If not, sync with the computer it normally syncs with.
If it is, place the device in DFU mode (google it) and restore. -
I am also unable to get the 551L working with Windows 8 Beta 1. Any advice?
I am also unable to get the 551L working with Windows 8 Beta 1 and Mac OS X 10.8 Mountain Lion Developer Preview 2. Any Advice?
It should be noted that I was previously in those Windows Beta's and I am also a member of both Microsoft Technet (Retail Subscription), and all 3 Apple Developer Programs (IOS, Mac and Safari), which is the reason why I am running Microsoft Windows 8 Beta 1 on 2 of my 3 Dell's (the oldest one has Microsoft Windows XP Service Pack 3 and Microsoft Office 2003 on it, which is the PC that I am using the 551L on), and the Mid Year 2010 Apple Mac Mini has Mac OS X 10.8 Mountain Lion Server Edition on it (something that I am technically am NOT supposed to be talking about here due to my NDA so this will be the last time I mention it here (as you can see I am known for being the type of Computer Nerd that loves Alpha and Beta Testing)! :-)
Maybe you are looking for
-
Indexing in alternate runs of a loop
I would like to send data out of a for loop only in alternate runs like i=1,3,5,7,9....etc...But i want to use the indexing feature to send the data out of the loop..so any idea how this can be done..or do i need to store in an array and then send th
-
My macbook pro cannot connect to the app store is there anyway of fixing this?
my macbook pro cannot connect to the app store does anyone know how to fix this?
-
Photoshop Error - Exception Type: EXC_BAD_ACCESS (SIGBUS)
Everytime I open files in Photoshop (even after installing the correct fonts), Photoshop crashes. Help! Process: Adobe Photoshop CS5 [4308] Path: /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photos
-
Hi All, Can anybody tell in which transaction we can see the deleted objects. I need to get the information of who has deleted ODS objects. Thanks & Regards, SGK
-
Did I permanently delete my contacts and calendar??
Hello, I finally upgraded my MacBook OS to 10.6.8, as well as getting up to date with the latest iphone OS. Before, I had an old OS (10.4 I believe) which was too old for my newer iphone to synch to. So, my laptop iTunes had old data from my old phon