Unable to integrate CQ5.4 with SiteCatalyst

Hi,
I am a newbie to the Adobe Marketing Cloud and am trying to setup/test the connection between CQ5.4 and SiteCatalyst. I am following the documentation on http://dev.day.com/docs/en/cq/current/administering/integrating_with_omniture/sitecatalyst .html and am not able to cross step number 1 of the integration.
I've looged in to the Cloud Services section and am not able to authenticate the user. We have created a new test user on our Site Catalyst account and can confirm that this user has the Web Service Access priviledge. I am still not able to authenticate the user and constantly get the error " We were unable to login to Site Catalyst. Please check your credentials and try again".
I've confirmed that the credentials are correct and can log in to Site Catalyst UI directly with them. Any pointers on how I can get rid of this error ?

I've checked with our admin for Site Catalyst and the token count used is showing as 0. Here's a screenshot

Similar Messages

Unable to integrate Oracle Reports with Express--(To oracle Team also)

Hi
Unable to integrate Oracle Reports with Express. While defining
the Express database connection using the olap connection editor
iam getting the following error "Error locating the XCONEDIT.INI
file. Try re-installing the software".
what should be done?
Atleat,If anybody has successfully connected to Express via
Reports6i. Kindly give the details like what softwares to be
installed in what HOME? and also other steps involved in the
process.
YOur help !!!
kindly respond...(Oracle Team do respond with something)
with rgds

hello,
check out the notes
Note:112542.1
Note:167049.1
on oracle metalink for further information.
if you still have issues, please contact oracle support services
for furhter assistence.
regards,
the oracle reports team --pw

Unable to Integrate UCCX 9 with SocialMiner 9

Hi All,
I am unable to integrate the UCCX with the SocialMiner as the error message is "Unable to communicate to the SocialMiner on the IP address(Hostname) provided. Please verify whether SocialMiner is running on this IP address(Hostname) or check the network connection and make sure that SocialMiner is reachable from CCX".
As the SocialMiner is running on this IP. Please guide me.
Regards,
Durraze Khan
UCCE Support Engineer

Hi All,
After doing the latest patch for the SocialMiner i have integrated the UCCX 9 with the SocialMiner 9 now i am able able to Pull the agents from the Active Directory to the SocialMiner Please guide me that how to rectify this issue, looking forward to hear from you.
Best Regards,
Durraze Khan

Unable to integrate Perl files with weblogic 4.5.1

Hi
Does anyone know how to integrate perl with weblogic4.5.1 ?
Regards
Sandeep

Thanks for your reply. My .jsp files where working just fine before I changed the layout of the output. Even making changes to a simple file that contains: <% out.println("Welcome to the jsp page!"); %> to the following: <% out.println("Welcome to the jsp page! Today is the day!"); %> does not work. I have cleared the browser by deleting all cookies, temp files, history, etc. The changes to my file are not being compiled. I thought that in JSP 2.0 changes to your files where compiled automatically. Am I missing something? Please help!

Tagging Individual Pages with SiteCatalyst Variables in CQ5

Hey Guys,
I'm struggling with tagging individuals pages with SiteCatalyst variables in CQ5. I'm looking for insight/guidance around the following categories:
-CQ Variable documentation: Within the configuration environment, items under the CQ variable column (“pagedata.title”, “pagedata.path”, “pagedata.navTitle”, etc.) appear. Do you have any documentation for each term?
-SiteCatalyst variables: Within the configuration environment, users can drag and drop SiteCatalyst custom variables into any CQ Variable buckets (“pagedata.title”, “pagdata.path”, “pagedata.navTitle”, etc.). Do you have any examples successfully mapping SiteCatalyst and CQ5 variables together?
-SiteCatalyst view: Within the configuration environment, this page’s options are unclear. Any information or guidance would be highly appreciated.
- View pages within CQ5: After viewing the Connecting CQ with Adobe SiteCatlayst documentation, within the “ADDING CLICKSTREAM CLOUD VARIABLE MAPING” section, it appears users can tag pages with custom variables. Enabled within the “Page Properties” tab, I’m unable to find this section.
Any help would be HIGHLY appreciated!!!
Thanks
-Chad

Thanks Roland,
To give you more information. We discovered the source of the multiple instantiations of tabs from the page properties. We have a listener on the dialog.xml for our pages that listens for loadcontent events. In the course of its logic, the javascript for this listener will invoke dialog.loadContent(path) itself. Thus the double calls. Strictly speaking, we could look at ways to avoid the use of the loadContent call. But we also feel that there is something going on with regards to siteCatalyst and double-loading. This might be something you'll want to incorporate in your efforts to reproduce this. For posterity, here's a sample listener definition in our dialog.xml
<listeners
jcr:primaryType="nt:unstructured"
loadcontent="function(dialog, records, opts, success) {CQ.Acme.populateShortURL(dialog, records, opts, success);}"/>
Hope this helps!

Unable to integrate WLC with cisco ACS

Hi,
I am not able to integrate Cisco Tacas with WLC
Below are the error logs in Juniper firewall
WLC IP: 10.210.126.133
Cisco ACS: 10.116.45.131
Date/Time
Source Address/Port
Destination Address/Port
Translated Source Address/Port
Translated Destination Address/Port
Service
Duration
Bytes Sent
Bytes Received
Close Reason
2013-11-04 16:31:03
10.210.126.133:49098
10.116.45.131:49
10.210.126.133:49098
10.116.45.131:49
TCP PORT 49
2 sec.
591
428
Close - TCP FIN
2013-11-04 16:31:03
10.210.126.133:51759
10.116.45.131:49
10.210.126.133:51759
10.116.45.131:49
TCP PORT 49
2 sec.
525
326
Close - TCP FIN
2013-11-04 16:31:09
10.210.126.133:51759
10.116.45.131:49
10.210.126.133:51759
10.116.45.131:49
TCP PORT 49
9 sec.
475
238
Close - TCP FIN
2013-11-04 16:31:09
10.210.126.133:49098
10.116.45.131:49
10.210.126.133:49098
10.116.45.131:49
TCP PORT 49
9 sec.
519
318
Close - TCP FIN
Pls suggest further whether any changes needs to be done in any end
Cisco ACS Srver
11/04/2013
16:31:01
Author failed
ads.shalder
DCN-BANG2&BANG5-RW
127.0.0.1
Service denied
service=ciscowlc protocol=common
10.210.126.133
ads.shalder
No
1
10.210.126.133
Pls suggest further
Br/Subhojit

Hi,
we are getting this error on WLC side debug
(Cisco Controller) >*tplusTransportThread: Nov 05 09:51:32.683: Forwarding request to 10.116.45.131 port=49
*tplusTransportThread: Nov 05 09:51:32.689: tplus auth response: type=1 seq_no=2 session_id=5b675ca1 length=16 encrypted=0
*tplusTransportThread: Nov 05 09:51:32.689: TPLUS_AUTHEN_STATUS_GETPASS
*tplusTransportThread: Nov 05 09:51:32.689: auth_cont get_pass reply: pkt_length=25
*tplusTransportThread: Nov 05 09:51:32.689: processTplusAuthResponse: Continue auth transaction
*tplusTransportThread: Nov 05 09:51:32.700: tplus auth response: type=1 seq_no=4 session_id=5b675ca1 length=6 encrypted=0
*tplusTransportThread: Nov 05 09:51:32.700: tplus_make_author_request() from tplus_authen_passed returns rc=0
*tplusTransportThread: Nov 05 09:51:32.700: Forwarding request to 10.116.45.131 port=49
*tplusTransportThread: Nov 05 09:51:32.705: author response body: status=16 arg_cnt=0 msg_len=0 data_len=0
*tplusTransportThread: Nov 05 09:51:32.705: Tplus authorization for ads.shalder failed status=16
WLC hardware is: AIR-CT2504-K9V01
Br/Subhojit

How to integrate RFSG driver with sampling theorem labview code

hi all,
I got the labview code of sampling theorem from labview-> find examples. How can I integrate this code with PXI system? How can I integrate the RFSG driver with labview code?

Hi Nieman,
LabVIEW 2014 should be compatible with the 9068 and the cRIO 2.1 drivers. I verified it should work as expected earlier today. Please make sure you are using the example cRIO PN-IO Device when you are moving the module over to the new target. If you are already accessing that, please navigate to this folder:
<Program Files>\National Instruments\LabVIEW 2014\Targets\NI\FPGA\cRIO\other
Please let me know if you see a CS_cRIO-PNAD folder. This folder provides all the files necessary to discover and use the module in the project. If we do not have that folder there, we will be unable to locate the module. If that is indeed the case, then it may be the driver did not install correctly.
If after finding this folder and it is still not working, please send me screenshots of the error that you are seeing and a MAX Technical Report. Thanks!
Matt S.
Industrial Communications Product Support Engineer
National Instruments

Unable to integrate file server into KM......

Hello all,
I have performed all the steps required to integrate file server with portal(EP6 SP9-cluster installation) on UNIX.
Under component monitor->repository managers->file server's name I'm unable to see mountinfo running.
As specified by SAP, "File System Mount Service" gets started automatically.
Can anybody help me out with this.
Regards,
Amol.
Note:i have performed the same steps on our development server resulting in successful integration.

Hi Shaun
Tried both of your suggestions, however neither strategy worked.
Strategy 1
Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"
Feature un-installed itself during the restart.
Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services". However
this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
PACKAGE SERVICING COMMANDS:
/Add-Package - Adds packages to the image.
/Remove-Package - Removes packages from the image.
/Enable-Feature - Enables a specific feature in the image.
/Disable-Feature - Disables a specific feature in the image.
/Get-Packages - Displays information about all packages in the image.
/Get-PackageInfo - Displays information about a specific package.
/Get-Features - Displays information about all features in a package.
/Get-FeatureInfo - Displays information about a specific feature.
/Cleanup-Image - Performs cleanup and recovery operations on the image.
Strategy 2
Tried installing via powershell, using the following command DISM
/online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
All up back to where I started?

Unable to sync some apps with my ipod

I am unable to sync some apps with my ipod touch

See:
Identifying iPod models
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Is it possible to integrate LSO 600 with an external system without SAP PI?

Hi,
as asked in the title, i am wondering if it is possible to integrate LSO 600 with an external (non-SAP) system without using SAP PI/XI. The external system is a middleware application which can handle RFC functions, IDocs besides the usual web service communications.
However, i don't know how LSO and SAP PI are integrated so i wonder if their interfaces are such that instead of SAP PI another middleware could be used.

Web Services are used. If you were to implement the services in your 3rd party middleware and configure SAP to call it, I suppose it is possible. The external course catalog can be used for CourseEnrollment and LearningProgress. See the application help for details. Don't expect to receive support from SAP with such a setup however.

When i plug my phone to the USB cable it is no longer showing in itunes and i am unable to syn my phone with pc

UNABLE TO SYNC MY PHONE WITH PC. WHEN I PLUG MY PHONE TO THE PC VIA THE USB CABLE IT NO LONGER APPEARS IN I TUNES.

See here: http://support.apple.com/kb/TS1538?viewlocale=en_US&locale=en_US

On my imac, All of a sudden I am unable to send original emails with any attachments. I can attach the file but when I try to send it, it won't send. Also, if I am emailing back and forth as it gets longer, it no longer transmits

On my imax, all of a sudden I am unable to send original emails with attachments of any size. I can attached the file but when I try to transmit, it will not go.
Also, if I am emailing back and forth, once there gets to be several threads, it will no longer transmit. Any suggestions. I am using gmail in the apple mail system

Mike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer. Then I would launch Logic and see if the problem has been corrected. It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

Unable to find a Re-Seller willing to sell me an Upgrade from Acrobat 9-Pro to XI. Live in Puerto Rico. Cannot buy through the Adobe Website. Locally identified Re-Seller unable/unwilling to provide me with the advertised Upgrade. My Options are; please?

Unable to find a Re-Seller willing to sell me an Upgrade from Acrobat 9-Pro to XI. Live in Puerto Rico. Cannot buy through the Adobe Website. Locally identified Re-Seller unable/unwilling to provide me with the advertised Upgrade. My Options are; please?

Reason I had to chat with Customer Support is that I got the following message upon placing Upgrade Order.
What Different Country? It's the US. The ONLY placed I've lived my entire life! Apparently some software changes were made to the site and the PR Territory fell in a no-man's land.

I am unable to get a connection with my ipad through my router but I am able to get in when at my friend's house

I am unable to get a connection with my ipad with my wifi router. Will I need to upgrade my router

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I just restored my phone, however I have to sign into icloud and the phone is set to the previous owner's email and password. I am unable to get in contact with them. What can I do?

I just restored my phone, however I have to sign into icloud and the phone is set to the previous owner's email and password. I am unable to get in contact with them. What can I do?
Please help!

Hello codyfromseminole,
After reviewing your post, I believe your device is under Activaltion Lock. The following article will provide you with more information about the feature:
iCloud: Activation Lock
With iOS 7 or later, Find My iPhone includes a feature called Activation Lock, which is turned on automatically when you set up Find My iPhone. Activation Lock makes it harder for anyone to use or sell your iPhone, iPad, or iPod touch if it’s ever lost or stolen.
With Activation Lock, your Apple ID and password are required before anyone can:
Turn off Find My iPhone on your device
Sign out of iCloud on your device
Erase and reactivate your device
Important: Make sure to remember your Apple ID and password, and that your password is unique and secure—someone else shouldn’t be able to guess it. For more information, see the Apple Support article Security and your Apple ID.
If you want to give away or sell your device, be sure to erase your content and settings (in Settings > General > Reset > Erase All Content and Settings). When you erase your content, Find My iPhone and Activation Lock are also turned off.
If you no longer have the device, follow the instructions to remove a device you no longer have. For more information, see the Apple Support article What to do before selling or giving away your iPhone, iPad, or iPod touch.
For more information about Activation Lock, see the Apple Support article Find My iPhone Activation Lock in iOS 7.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Unable to integrate CQ5.4 with SiteCatalyst

Similar Messages

Maybe you are looking for