Unable to integrate file server into KM......

Hello all,
I have performed all the steps required to integrate file server with portal(EP6 SP9-cluster installation) on UNIX.
Under component monitor->repository managers->file server's name I'm unable to see mountinfo running.
As specified by SAP, "File System Mount Service" gets started automatically.
Can anybody help me out with this.
Regards,
Amol.
Note:i have performed the same steps on our development server resulting in successful integration.

Hi Shaun
Tried both of your suggestions, however neither strategy worked.
Strategy 1
Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"
Feature un-installed itself during the restart.
Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services". However
this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
PACKAGE SERVICING COMMANDS:
/Add-Package - Adds packages to the image.
/Remove-Package - Removes packages from the image.
/Enable-Feature - Enables a specific feature in the image.
/Disable-Feature - Disables a specific feature in the image.
/Get-Packages - Displays information about all packages in the image.
/Get-PackageInfo - Displays information about a specific package.
/Get-Features - Displays information about all features in a package.
/Get-FeatureInfo - Displays information about a specific feature.
/Cleanup-Image - Performs cleanup and recovery operations on the image.
Strategy 2
Tried installing via powershell, using the following command DISM
/online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
All up back to where I started?

Similar Messages

Problem while integrating windows file server into SAP KM using WEBDAV

Hi
I am trying to integrate windows file server into SAP KM using WEBDAV . I have downloaded the kerberos ini filter and included in the windows system. I am only trying to bring the files in the same system into KM but with no luck. When i check the log file in the kerberos folder i am getting
12:02:22 10828/10476 E OnPreprocHeaders: Found 0 UserPrincipalNames for ADSI Filter (&(objectCategory=person)(objectClass=user) (userPrincipalName=xxxx)).
In the log i am getting the following
ERROR! Delegation Flag:Use any authentication protocol: NOT ACTIVE
 Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
 Right-click 'IDBSRV8' and choose 'Properties'.
 Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
 Select 'Use any authentication protocol'.
 ERROR! The Trusted-to-Authenticate-for-Delegation flag is not set for SPN 'HOST/idbsrv8.idbhq.org'.
 Please check the SPN by calling 'setspn -l IDBSRV8'.
 If the SPN is well known, configure the Trusted-to-Authenticate-for-Delegation flag:
 Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
 Right-click 'IDBSRV8' and choose 'Properties'.
 Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
 Select 'Use any authentication protocol' and choose 'Add'.
 Select 'Users or Computers' and enter IDBSRV8 as object name.
 Add the ServicePrincipalName HOST/idbsrv8.idbhq.org.
Can anybody please help me in this regard???
Regards,
Ganesh N
Message was edited by:
 Ganesh Natarajan

Hi Ganesh,
this error message tells you that there is no user in your active directory that has the userPrincipalName xxxx.
The SSO22KerbMapModule works as follows.
1. It receives a SAP Logon Ticket from the WebDAV request.
2. If valid the SAP username is extracted. In your case the SAP username is xxxx.
3. It then searches for a user in AD. It does so using the attribute in the ini-file that has been specified to contain the SAP username. In your case the SAP username should be identical with the userPrincipalName.
So you have to make sure that the portal user id (j_user) is mapped to the same AD user attribute that is specified in the ini-file .
Best regards,
Andre

Query on integrating windows file server into SAP KM using WEBDAV

hi
I have sucessfully integrated windows file server into SAP KM using WEBDAV. I have query in it regarding the possible validation against the portal Database user. Can we configure such that the user comparison happens for LDAP as well as database user. Have anyone configured such a scenario?
Regards,
Ganesh N

Hi Ganesh,
this should work in principle.
However you would need a user in Active Directory for each user in the portal database that should connect to the file server if you are using the SSO22KerbMap Module as I assume.
In my whitepaper I have mentioned this for the internal user index_service that does only exist in the portal database.
Best regards,
André

PDF file transfer from File server into SAP

Hi,
I need to get the PDF file which exists in the File server into SAP using XI in any format so that I can convert into required form in SAP but the file exists in PDF format in File server or any method other than XI .Is it possible to do it through XI if so please explain me the procedure.
Answers will be appreciated with points.
Thanks,
Ramesh.

Hi Ramesh,
In addition to above reply, also go through these blogs whcuh also talk about ADF Conversion:
<a href="/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield:///people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
<a href="/people/sap.user72/blog/2005/07/27/xi-generate-pdf-file-out-of-file-adapter:///people/sap.user72/blog/2005/07/27/xi-generate-pdf-file-out-of-file-adapter
Regards,
Subhasha Ranjan

Urgent: integrating windows file server into ep using KM.

hi..
can somebody give me detail steps of integrating windows file server into ep using KM.
when i give password in the network path it is not accepting the password of the windows....
Good answers will be rewarded points...
bye....

Hi,
You can check:
System Administration-System Configuration-KM-CM-Repository Managers-File System Repository-create a new item
Root Directory can be:
machine\sharedirectory
and in CM-Global Services-Network Paths->create a new item
in Network Path field:
machine\sharedirectory
enter your password
user: domain\user
Integrating Documents from a Windows System into KM
http://help.sap.com/saphelp_nw2004s/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm
Patricio.

Unable to add File Server Resource Manager Tools on Windows Server 2012 - Errors on restart and roll back install

Unable to install Windows Server 2012 Feature - [Tools] File Server Resource Manager Tools.
Installs, however when I restart the server error messages appears saying feature unable to install, windows reverting changes.
In the Setup event logs have the following information message "Update FSRM-Infrastructure of package FSRM-All failed to be turned on. Status: 0x800f0922"
Does anyone have any idea's on why this Feature can not be installed ??
Scott

Hi Shaun
Tried both of your suggestions, however neither strategy worked.
Strategy 1
Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"
Feature un-installed itself during the restart.
Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services". However
this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
PACKAGE SERVICING COMMANDS:
/Add-Package - Adds packages to the image.
/Remove-Package - Removes packages from the image.
/Enable-Feature - Enables a specific feature in the image.
/Disable-Feature - Disables a specific feature in the image.
/Get-Packages - Displays information about all packages in the image.
/Get-PackageInfo - Displays information about a specific package.
/Get-Features - Displays information about all features in a package.
/Get-FeatureInfo - Displays information about a specific feature.
/Cleanup-Image - Performs cleanup and recovery operations on the image.
Strategy 2
Tried installing via powershell, using the following command DISM
/online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
All up back to where I started?

Migrate documents from the windows file server into km

Hi All,
I have around 100 GB of documents in a file server and i want to migrate the same data in to KM.
I am sure that there should be some standard process to do this,can any one please help me out in solving this.
Thanks
Ajay

Hi Ajay,
what do you mean by migrate? You could use a Windows Filessystem KM-Repository to integrated these files directly into KM (http://help.sap.com/saphelp_nw70/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm)
Otherwise you could use WebDAV (http://help.sap.com/saphelp_nw70/helpdata/en/4a/217fb6c33c6748a1715a161ac942cd/frameset.htm, http://help.sap.com/saphelp_nw70/helpdata/en/43/9600e5391e25dee10000000a1553f7/frameset.htm) or the Portal Drive (http://help.sap.com/saphelp_nw70/helpdata/en/42/c99b91341a6bade10000000a1553f6/frameset.htm) to copy these files in a (for example) DB repository.
Regards,
Holger.

How to integrate File Server with Portal??

Hi all,
can any one tell me that how interegate the File Server With Portal Server??
In my portal server under home tab i have sub tab (second level navigation) of File server.Whe i click this tab it throws an syntax error
ie
System Error
An exception occurred during the program execution. Below you will find technical information pertaining to this exception that you might want to forward to your system administrator.
Exception Class :: class com.sapportals.wcm.repository.NotSupportedException
Exception Message :: Not Implemented
thease are the steps that i have taken
>created HTTP System..
>created WebDAV Repository.
>Created Cache.
>Created KM WebDAV System.
>Created Iview and in iview i have to specify the Path to Initially Displayed Folder
i have specified the folder of file server that i want to display..
but i get the same syntax error ..
infact i dint get that folder in KM.
But when i specify the folder that is present in KM its Work fine..
Now the Scnerio According to me is that File server is not integrated properly
if it would be integrated properly i would be able to see the folder of File server in KM...
am i correct ??
please Guide me to integrated the File Server Properly??
Points will be given for any help..
Regards
Vinit

Hi Vinit,
if you want some Windows File Server integrated into Portal, please do not use a WebDAV Repository, but use the File System Repository instead. Therefore you need to configure the according Repository Manager. Please refer to this documentation:
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm">Integrating Documents from a Windows System into KM</a>
HTH,
Carsten

Unable to register file server in OVM 3.0.1

I'm stuck on attempting to register a fileserver in VM Manager 3.0.1; When I go to register a new file server, the "Storage Plug-in" drop-down is blank. What can I do to dig into this? Nothing about this is covered in the documentation...

First must Discover VM Server!

Unable to backup file server with DPM 2012R2

Hello. I've got some strange problem file backing up a file service with DPM 2012R2.
File server - Windows 2012 R2
DPM server - Windows 2012 R2 with DPM 2012 R2
DPM storage - IBM DS3524
The backup lasts for about 11 hours, transfers about 1,7 TB (full file share size is about 11TB) and stops with event 104 ID (The parameter is incorrect (0x80070057)).
In DPM log I see:
05C0 1808 12/18 02:53:59.549 31 restoresubtask.cpp(226) [0000000001F928D0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 NORMAL CRestoreSubTask::GetFinalStatus [0000000001F928D0]
05C0 1808 12/18 02:53:59.549 31 aasubtask.cpp(906) [0000000001F928D0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING <?xml version="1.0"?>
79556B6BDB60 WARNING <Status xmlns="http://schemas.microsoft.com/2003/dls/StatusMessages.xsd" StatusCode="-2147024809" Reason="Error" CommandID="RAWriteDataset" CommandInstanceID="bc2ba145-26ed-412e-8d10-ba20f9859fa2"
GuidWorkItem="edaff08a-7602-4b9b-b4b8-29f043dfb0fa" TETaskInstanceID="663a6cbb-158f-49c4-a3c3-79556b6bdb60"><ErrorInfo xmlns="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd" ErrorCode="998" DetailedCode="-2147024809"
DetailedSource="2"/><RAStatus><RAWriteDataset xmlns="http://schemas.microsoft.com/2003/dls/ArchiveAgent/StatusMessages.xsd" BytesTransferred="1864495988736" NumberOfFilesTransferred="1095357" NumberOfFilesFailed="0"
DataCorruptionDetected="false"/></RAStatus></Status>
05C0 1808 12/18 02:53:59.549 03 runtime.cpp(1376) [00000000010549A0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 FATAL Subtask failure, sending status response XML=[<?xml version="1.0"?>
79556B6BDB60 FATAL <Status xmlns="http://schemas.microsoft.com/2003/dls/StatusMessages.xsd" StatusCode="-2147024809" Reason="Error" CommandID="RAWriteDataset" CommandInstanceID="bc2ba145-26ed-412e-8d10-ba20f9859fa2"
GuidWorkItem="edaff08a-7602-4b9b-b4b8-29f043dfb0fa" TETaskInstanceID="663a6cbb-158f-49c4-a3c3-79556b6bdb60"><ErrorInfo xmlns="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd" ErrorCode="998" DetailedCode="-2147024809"
DetailedSource="2"><Parameter Name="AgentTargetServer" Value="SPBSCM.polymetal.ru"/></ErrorInfo><RAStatus><RAWriteDataset xmlns="http://schemas.microsoft.com/2003/dls/ArchiveAgent/StatusMessages.xsd"
BytesTransferred="1864495988736" NumberOfFilesTransferred="1095357" NumberOfFilesFailed="0" DataCorruptionDetected="false"/></RAStatus></Status>
05C0 1808 12/18 02:53:59.549 03 runtime.cpp(1376) [00000000010549A0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 FATAL ]
05C0 1808 12/18 02:53:59.549 31 restoresubtask.cpp(833) [0000000001F928D0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 NORMAL CRestoreSubTask::CleanUp [0000000001F928D0]
05C0 1808 12/18 02:53:59.549 31 restoresubtask.cpp(78) [0000000001F928D0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 NORMAL CRestoreSubTask: destructor [0000000001F928D0]
05C0 1808 12/18 02:53:59.549 18 dsmsubtaskbase.cpp(86) [0000000001F92CA0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 NORMAL CDsmSubTaskBase: destructor [0000000001F92CA0]
05C0 1808 12/18 02:53:59.549 18 mtfparser.cpp(322) [0000000002009480] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Data corruption near MTF DBLK at logical offset:1864495792128
05C0 1808 12/18 02:53:59.549 18 mtfreader.cpp(142) [0000000002009480] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : CMtfParser::GetNextDblkReader(pBuffer,
cb)
05C0 1808 12/18 02:53:59.549 18 mtfparser.cpp(246) [0000000002009480] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : HandleDblkParseFailure(const_cast<LPBYTE>(pBuffer+cbOffset),
cb-cbOffset, cbRead, fNewDblk, hr, &cbRead)
05C0 1808 12/18 02:53:59.549 18 dsmreceiversubtask.cpp(190) [0000000001F92CA0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : m_pMtfReader->Parse(pMsgBody,
cbSize)
05C0 1808 12/18 02:53:59.549 18 dsmreceiversubtaskbase.cpp(445) [0000000001F92CA0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : hr
05C0 1808 12/18 02:53:59.549 18 dsmreceiversubtaskbase.cpp(247) [0000000001F92CA0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : OnReadCompleted(dwNumberOfBytes,
pAgentOvl, dwError)
05C0 1808 12/18 02:53:59.549 18 dsmreceiversubtaskbase.cpp(198) [0000000001F92CA0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : ProcessWaitCompletion(dwNumberOfBytes,
pAgentOvl, dwError)
I've assigned the letter to the drive to which DPM was backing up, found the last file (the size was 0) and copied this file from the source without any problem.
This problem occurred several times with different storages for replica. Unfortunately previous logs went away so I cannot say that it stopped on the same file, but the error "Data corruption near MTF DBLK" was the same.
When the file server was on Windows 2008 R2 and DPM was 2012 SP1 there were no problems with backup.

Hi,
This is a known issue and is actively being investigated for a fix.
See the following thread:
http://social.technet.microsoft.com/Forums/en-US/b53b82b1-639b-4561-9ed2-f9749abd84f8/dpm-2012-r2-an-unexpected-error-occurred-while-the-job-was-running-id-104-details-the-parameter?forum=dpmfilebackup
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Unable to integrate SimpleImpl example into split-level directory structure

I am trying to integrate the SimpleImpl web service example into my weblogic server 9.1 application, but I am at a dead end.
Here is what I have so far.
A WSDL that is visible at a path of http://<host>:<port>/simple/SimpleService?WSDL
A JWS_WebService.jsp that loads and appears to retrieve the WSDL.
The simpleImpl example is a sub-deployment of module-type 'wsee' inside an app-deployment of module-type 'ear'.
I did not put the library-ref (generated by jwsc) from the weblogic-application.xml in my ear's weblogic-application.xml.
When I go to the JWS_WebService.jsp in my web app (another sub-deployment in my ear). I submit the example query and get the following error. Has anyone seen this before?
sayHello() returned:
java.rmi.RemoteException: SOAPFaultException - FaultCode [{http://schemas.xmlsoap.org/soap/envelope/}Client.Authentication] FaultString [Access Denied to operation sayHello] FaultActor [null] Detail [weblogic.wsee.util.AccessException: Access Denied to operation sayHello
 at weblogic.wsee.security.AuthorizationHandler.handleRequest(AuthorizationHandler.java:78)
 at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.java:127)
 at weblogic.wsee.ws.dispatch.server.ServerDispatcher.dispatch(ServerDispatcher.java:84)
 at weblogic.wsee.ws.WsSkel.invoke(WsSkel.java:60)
 at weblogic.wsee.server.servlet.SoapProcessor.handlePost(SoapProcessor.java:66)
 at weblogic.wsee.server.servlet.SoapProcessor.process(SoapProcessor.java:44)
 at weblogic.wsee.server.servlet.BaseWSServlet$AuthorizedInvoke.run(BaseWSServlet.java:124)
 at weblogic.wsee.server.servlet.BaseWSServlet.service(BaseWSServlet.java:53)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
 at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
 at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
 at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
 at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
 at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Thanks,
Robb

I confirm : everyone on the planet is getting the same issue : from windows 8.1 to a NAS : doesn't copy without message, just creates silently the first folder and leave it empty.
every other combination works : from windows 7 to the same NAS, windows 8.1 to an USB key, everything works.
for your information, a NAS is a standalone device, not a computer, you can only manage it remotely.
so just stop asking about details about the error message, there isn't any.
this is not something you can fix by making settings or reading KB. you have to make the test yourself if you don't believe your customers, and once you'll understand that this is a serious bug, you have to escalate to the development teams to alter the
windows 8 code to make it work almost as well as a windows 7 can.
pardon me if i speak hardly, but i've just made a dozen of internet searches, and the whole platet seems to be aware of this issue, you are the only one who ignores it or ask an unrelated question. on another hand, your are the ony ones that can fix it.
Don't try to incriminate the NAS firmware as you were able to deal with it in windows 7.
if you need more info, just make an internet search with the following terms :
"windows 8.1" when copying on a "network drive" nas

Integrating Dialog/App server into 4.7 system

We are on SAP R/3 4.7 using Oracle 9.2.0.6 and Solaris 8.
To test the performance of a Linux application server on our QA system, we installed Suse Linux 9 on a server and have performed the SAP installation as per the Installation Guide "SAP R/3 Enterprise on UNIX: Oracle - Using SAP R/3 Enterprise Core 4.70, SAP Enterprise Extension Set 2.00", following the Linux-specific instructions for Dialog servers.
The installation completed successfully, and 'startsap' brought the App server box up successfully.
However, the App server is not visible in SM51, and efforts to sign into it via the SAP GUI produce the error WSAECONNREFUSED - Error 10061. We have previously experienced the same issue with another App server on which we installed SQL Server.
I am not aware of any steps that were missed in the installation guide, and would like to know if there is a procedure that needs to be followed after installation to integrate the server into the existing system. During the SAPinst process, the server was identified as a Dialog Server, and the name of the Central/Database instance was specified, so I would have expected the system to recognize the new Dialog/Application server.
This is the first time I have installed an Application/Dialog server, and any information regarding what is missing would be very valuable.
Thanks,
Mervyn

hello Mervyn,
Please check in SAP MMC if the dialog instance(application server) is showing up or not. Further check if it is running. You should also try to restart the SAP server.
Regards.
Ruchit.

How to integrate C++ server in weblogic

I have developed a C++ class implementing a kind of server. It
receives requests from clients, processes the requests (by
accessing ODBC databases), and returns the results back to the
client. Then it remains waiting for the next request, never
finishes.
Now I am trying to integrate this server into a Weblogic
environment to take benefit of scalability, availability,
performance, ...
I would like to know what are my choices:
a) I think that servlets are not suitable as I do not want my
server to finish execution after serving a request. But what
about servlets + EJBs. Could my server be implemented with a
combination of both?
In that case I suppose that I cannot take advantage of the JDBC
conection pool from my C++ class, can I? ...
b) I could make a java wrapper for my C++ functions in order to construct an RMI object. I wonder if this is possible.
c) I could implement my server as a CORBA object. Then the
weblogic server would have an active IIOP connection pool for
say 5 or 10 instances of my CORBA object. Do I really need to
purchase Weblogic Enterprise? Can I do something else with the
Weblogic Server?
In that case the ODBC connections would be established at the
CORBA startup time.
c) Other?
Thanks in advance.

Comments inline...
David Ruana wrote:
Eduardo, does your solution require the Weblogic Enterprise product or just the Weblogic Server?No, WLS will not work with WLE until the next point release of WLE.
Is a C++ ORB the same as a CORBA object?Yes.
>
>
On the other hand, I have wrapped the C++ class by means of JNI so that I have the corresponding java class available. Then the implementation of a RMI server is quite straightforward. I am just beginning with RMI but it seems far more easy that CORBA, isn't it?Yes, the only trouble is that iff your C++ object is colocated with the WLS server, you could take the whole server down iff the C++ code faults. What would also work, without this side effect, is if you wrapped the C++ code in a WLS client and bound the client side RMI server into the WLS server.
As I see it, the main advantage of this choice would be that the Weblogic Enterprise product would not be required (since Weblogic Server itself supports calling RMI from servlets, for example).
Please some further advise on this issue would be appreciated.
Thanks. David
Eduardo Ceballos <[email protected]> wrote:
Host your C++ server on a C++ ORB. BInd a reference to it into the COS Naming/WLS JNDI tree. Delegate calls from (into) the C++ object using WLS support for IIOP. This makes it so that the native code does not take down your server when (if) it goes south.
David Ruana wrote:
I have developed a C++ class implementing a kind of server. It
receives requests from clients, processes the requests (by
accessing ODBC databases), and returns the results back to the
client. Then it remains waiting for the next request, never
finishes.
Now I am trying to integrate this server into a Weblogic
environment to take benefit of scalability, availability,
performance, ...
I would like to know what are my choices:
a) I think that servlets are not suitable as I do not want my
server to finish execution after serving a request. But what
about servlets + EJBs. Could my server be implemented with a
combination of both?
In that case I suppose that I cannot take advantage of the JDBC
conection pool from my C++ class, can I? ...
b) I could make a java wrapper for my C++ functions in order to construct an RMI object. I wonder if this is possible.
c) I could implement my server as a CORBA object. Then the
weblogic server would have an active IIOP connection pool for
say 5 or 10 instances of my CORBA object. Do I really need to
purchase Weblogic Enterprise? Can I do something else with the
Weblogic Server?
In that case the ODBC connections would be established at the
CORBA startup time.
c) Other?
Thanks in advance.

On A Budget - Options for Using a File Server.

Hi - I have this relatively old 2008R2 file server (8GB memory and 25TB disk) I'd like to use as file storage for a SQL Server VM. The network is a 1GB switched configuration. The VM resides on relatively new hardware (Server 2012, SAS) but doesn't
have a lot of disk. I'd like to make a bunch of the file server space available for SQL Server Data (2008R2) - its a small network (10 users) that we want to load a bunch of glob data indexed by a few keywords as reference. Kind of like a
GIS database. My first thought is to create fixed vhdx file on the file server via Hyper-V manager, but this takes days to initialize for the size I'm thinking of (10TB). I created an expanding disk and it was pretty quick to create. I copied
a 4GB file over the net to the mounted (from the Hyper-V Host) vhdx file and it went pretty fast. I thought about using the iSCSI trick to attach it to the SQL VM (turning the file server into a SAN sort of?), but I'm wondering if this is overkill.
I'm just looking for a few suggestions. There is a lot of stuff out there, some of it conflicting, about storage configuration.
Thanks

Yes, upgrading....
I need to emphasize the budget thing. I will look into the iSCSI option. The VM is Server 2012.
We might be able to convert the 2008 server to Windows 8. It doesn't really do anything besides file shares and security is not a concern as we are not connected. Is that an option? Win8 supports SMB 3 I understand.
Yes you can do that. But... Older desktop versions of Windows were limited on amount of TCP connections they could handle obviously affecting usability and performance as a server. Not sure what's accurate for Windows 8 as MSFT has been changing this policy
back and forth all the time )) Check within MSFT licensing specialists before you do that.
P.S. I'd spawn FreeBSD or openSUSE with a Samba instead of a desktop version of Windows OS being used as a file server. IMHO.
Cheers,
Anton Kolomyeytsev [MVP]
StarWind Software Chief Architect
Profile:
Blog:
Twitter:
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Any Way to test Integration of File Server with Portal??

Hi all,
I want to integrate File Server with my Portal so that my Application and Data remains seperated.
I have integrated File Server but i am not able to find the Folder of file server in KM.
i have create KM Navigation Iview When i specify any folder that is available in KM it works fine but i can not see the folder of file server...
Is there any test with which i can check that weather my File Server is Integrated properly with my Portal or not?? 
Any help will be highly Appretiated ...
its very Urgent!!
Thanks in Advance
Vinit

Hi,
I think already file system repository created in the portal. plz check it
Goto >System Admin>System Config>KM>Content management>Repositories manager>File system Repository. or create a new repository..
You can use File System Repository so that you can integrate ur file server with portal. Refer this link
http://help.sap.com/saphelp_nw04/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Regards,
Senthil K.

Unable to integrate file server into KM......

Similar Messages

Maybe you are looking for