Unable to interpret the prtdiag o/p for CPU Slots & Memory DIIMS - V890

Unable to interpret the prtdiag o/p for CPU slots & Memory DIIMS on V890 server. Went through the sun docs for V890, but lead to lot of confusion.
your help on this would be appreciative.
Thanks

Hi,
below is the sample prtdiag output I've taken from a lab machine
System Configuration: Sun Microsystems sun4u Sun Fire V890
System clock frequency: 150 MHz
Memory size: 65536 Megabytes
========================= CPUs ===============================================
Run E$ CPU CPU
Brd CPU MHz MB Impl. Mask
A 0, 16 1500 32.0 US-IV+ 2.2
B 1, 17 1500 32.0 US-IV+ 2.2
A 2, 18 1500 32.0 US-IV+ 2.2
B 3, 19 1500 32.0 US-IV+ 2.2
C 4, 20 1500 32.0 US-IV+ 2.2
D 5, 21 1500 32.0 US-IV+ 2.2
C 6, 22 1500 32.0 US-IV+ 2.2
D 7, 23 1500 32.0 US-IV+ 2.2
========================= Memory Configuration ===============================
Logical Logical Logical
MC Bank Bank Bank DIMM Interleave Interleaved
Brd ID num size Status Size Factor with
A 0 0 2048MB no_status 1024MB 8-way 0
A 0 1 2048MB no_status 1024MB 8-way 0
A 0 2 2048MB no_status 1024MB 8-way 0
A 0 3 2048MB no_status 1024MB 8-way 0
B 1 0 2048MB no_status 1024MB 8-way 1
B 1 1 2048MB no_status 1024MB 8-way 1
B 1 2 2048MB no_status 1024MB 8-way 1
B 1 3 2048MB no_status 1024MB 8-way 1
A 2 0 2048MB no_status 1024MB 8-way 0
A 2 1 2048MB no_status 1024MB 8-way 0
A 2 2 2048MB no_status 1024MB 8-way 0
A 2 3 2048MB no_status 1024MB 8-way 0
B 3 0 2048MB no_status 1024MB 8-way 1
B 3 1 2048MB no_status 1024MB 8-way 1
B 3 2 2048MB no_status 1024MB 8-way 1
B 3 3 2048MB no_status 1024MB 8-way 1
C 4 0 2048MB no_status 1024MB 8-way 2
C 4 1 2048MB no_status 1024MB 8-way 2
C 4 2 2048MB no_status 1024MB 8-way 2
C 4 3 2048MB no_status 1024MB 8-way 2
D 5 0 2048MB no_status 1024MB 8-way 3
D 5 1 2048MB no_status 1024MB 8-way 3
D 5 2 2048MB no_status 1024MB 8-way 3
D 5 3 2048MB no_status 1024MB 8-way 3
C 6 0 2048MB no_status 1024MB 8-way 2
C 6 1 2048MB no_status 1024MB 8-way 2
C 6 2 2048MB no_status 1024MB 8-way 2
C 6 3 2048MB no_status 1024MB 8-way 2
D 7 0 2048MB no_status 1024MB 8-way 3
D 7 1 2048MB no_status 1024MB 8-way 3
D 7 2 2048MB no_status 1024MB 8-way 3
D 7 3 2048MB no_status 1024MB 8-way 3
<snip>
Board A, B, C & D represents 4 slots of the V890. Each slot has two CPU and associated memory slots ( 8 nos. for each CPU ) for each CPU.
Since its Sparc IV+ cpu, it has two cores and thus will have two CPU id associated with each physical CPU.
Slot A ==> CPU 0 & 2
Slot B ==> CPU 1 & 3
Slot C ==> CPU 4 & 6
Slot D ==> CPU 5 & 7
For memory interleaving and bank configuration, please go through below document.
http://docs.sun.com/source/817-3956-12/hw_config.html
HTH..
Mehul

Similar Messages

Email alerts for CPU and Memory status of CUCM

Hi All,
can anybody help me here?
Will RTMT trigger the daily email notification for CPU and Memory status of CUCM? If yes, kindly let me know the procedure.
Thanks in advance !!!!

Hi Hariharan,
In addition to Atul's link please refer the below mentioned link CPU and Memory usage
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/managed_services/cucm_health.html#wp1101115
Tx,
Hope this helps
Shalu

RFC_ERROR_LOGON_FAILURE: The system is unable to interpret the SSO ticket

Hi folks,
i've here an issue that i could not solve, i've implemented SSO between SAP EP and SAP ERP 2005 several times but this time i've the error message
" The system is unable to interpret the SSO ticket received"
I've already imported portal certificate, put parameters in instance profile and restart ERP but it still gave the error, i found the same issue from others sdn users but none of then have the solution for me.
Could anyone help me here?
This is a urgent matter.
thanks in advance,
Pedro Rodrigues

Hi Pedro,
what result do you get in a connection test in the portal ?
To do that :
open the System definition (under System Administrator/System Configuration);
Open the ERP 2005 system entry> "Connection Test"
Select "Connection test for Connector".
Also make sure that the domain of both systems (portal and ERP) are the same e.g. portal.company.com and erp.company.com . IP addresses are not working in SSO....
Also helpful is the OSS 701205 which has a attached PAR file for testing the SSO.
Regards,
Kai

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

Unable to determine the install root path for the LabVIEW Runtime Engine

Hi,
i have an issue with using a LabVIEW interop assembly in a .NET application. I get an exception "Unable to determine the install root path for the LabVIEW Runtime Engine" when calling the assembly.
The little test program is attached below. It's called dotNETHost.exe. If you excecute the programm a dialog with an button appears. Clicking the button shall open another dialog (the LabVIEW Interop component). But the only thing I get is the exception message. The ZIP folder also contains the complete exception meassage (ExceptionMessange.jpg & ExceptionDetails.txt).
The Interop Assembly was built with LabVIEW 2011. We use Visual Studio 2010 and .NET 4.0.. The dotNETHost.exe.config file is prepared as mentioned in Knowledge base - Loading .NET 4.0 assemblies.
The Interop assembly contains only one simple dialog (loop is finished by clicking OK) without calling any other VIs or other DLL's. In case of this there's also no support directory generated by the build process.
I have no idea why it doesn' work. I hope anyone can help me.
Thanks in advance
Kay
Attachments:
Debug.zip ‏75 KB

This may be unrelated, but Labview and .Net4.0 dont work well together. Not yet anyway. I had to compile my assembly in 3.5 to get it to work.
Please read the following:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/configuring_clr_version/
http://digital.ni.com/public.nsf/allkb/32B0BA28A72AA87D8625782600737DE9
http://digital.ni.com/public.nsf/allkb/2030D78CFB2F0ADA86257718006362A3?OpenDocument
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Unable to find the default new form for list mylist1 - deploying the list instance via module feature

hi,
am facing a problem deploying a list instance via a feature,
I created the list in the UI with content and views.
Exported the site template as WSP.
Imported into Visual Studio the list instance, pages module and property bags.
Copied into my new solution.
Deploy list instance as a site-collection level scoped feature.
activated the below features :
mylist_ModulesFeature
mylist_ListInstancesFeature
mylist_PropertyBagFeature
List deploys fine with content and views. However, I receive the following error when trying to add a new item: “Unable to find the default new form for list”. The same applies for editing items.
can anyone pls help why i am getting this error ?

try these links:
http://tomvangaever.be/blogv2/2010/04/unable-to-find-the-default-new-form-for-list/
http://sharebrad.blogspot.in/2012/08/unable-to-find-default-edit-form-for.html
http://stackoverflow.com/questions/10243131/deploying-a-list-instance-to-sharepoint-2010-error-unable-to-find-the-default-n
https://happiestsharepointminds.wordpress.com/2014/03/01/unable-to-find-the-default-edit-form-for-list-or-unable-to-find-the-default-display-form-for-list/
http://itsolutionsblog.net/sharepoint-problem-with-library-forms-unable-to-create-folder-ore-edit-properties/
http://blogs.technet.com/b/yashgoel-msft/archive/2013/08/30/recreating-default-display-edit-and-new-forms-of-a-list-in-sharepoint-2010-using-powershell.aspx
Please mark answer as correct if it is correct else vote for it if you find it useful

We got error "System is unable to interpret the SSO ticket received"

We got error "System is unable to interpret the SSO ticket received" on Backend system(R/3 4.7).
We use SAP Enterprise Portal 6.0 SP15.
Please let us know what is problems ?
We done following steps in SAP EP.
1. Created LOGON-METHOD (Logon Method : SAPLOGONTICKET).
2. Export Public-key (verify.der) from SAP EP.
   (System Admin -> System config -> Keystore Administration -> Download)
We done following steps in SAP R/3.
3. Start STRUSTSSO2 Transaction.
   In the PSE status frame on the left, choose the system PSE.
   In the certificate section, choose Import Certificate.
     The Import Certificate screen appears.
   Choose the File tab.
   In the File path field, enter the path of the portal's verify.der file.
   Set the file format to DER coded and confirm.
   In the Trust Manager, choose Add to PSE.
   Choose Add to ACL, to add the Portal Server to the ACL list.
   In the dialog box that appears, enter follows:
     system ID    :J2E
     client       :000
     Subject name :CN=J2E
     Issuer name :CN=J2E
     Serial number:00
   Save your entry.
4. Set profile parameters
   login/accept_sso2_ticket = 1
   login/create_sso2_ticket = 0
5. Restart SAP R/3 system.

Hi,
I faced the same problem when i am configuring the SSO,
check the portal client number in System Administration>System Configaration->UM Configuration--->Direct Editing
and give the same client number
In the dialog box that appears,
system ID :J2E
client :000
else check weather u r importing the certificate correctly.
First export the verify.der and and import that using the STRUSTSSO2
Thanks
Ajay

The system is unable to interpret the SSO ticket received

Hi,
We are facing the following error. Could anyone please help us understand/resolve the same
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: The system is unable to interpret the SSO ticket received
     at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java(Compiled Code))
     at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java(Compiled Code))
     at com.sap.mw.jco.JCO$Client.connect(JCO.java(Compiled Code))
     at com.sap.mw.jco.JCO$Pool.initPool(JCO.java(Compiled Code))
     at com.sap.mw.jco.JCO$PoolManager.getClient(JCO.java(Compiled Code))
     at com.sap.mw.jco.JCO$PoolManager.getClient(JCO.java(Inlined Compiled Code))
     at com.sap.mw.jco.JCO.getClient(JCO.java(Inlined Compiled Code))
     at com.sap.mw.jco.webas.WebDynproExtension.addClientPool(WebDynproExtension.java(Compiled Code))
     at com.sap.mw.jco.webas.WebDynproExtension.addClientPool(WebDynproExtension.java(Compiled Code))
     at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.createPool(AbstractJCOClientConnection.java(Compiled Code))
     at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.checkPoolEntry(AbstractJCOClientConnection.java(Inlined Compiled Code))
     at com.sap.tc.webdynpro.serverimpl.core.sl.AbstractJCOClientConnection.getClient(AbstractJCOClientConnection.java(Compiled Code))
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModelInternal(BackendConnections.java:261)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:226)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:159)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:183)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.connectModel(FPMComponent.java:699)
     at com.sap.pcuigp.xssfpm.wd.BackendConnections.init(BackendConnections.java:138)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.init(InternalBackendConnections.java:179)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:170)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java(Compiled Code))
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java(Inlined Compiled Code))
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java(Inlined Compiled Code))
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java(Compiled Code))
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:382)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:618)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
- Harshal

Hello Erin,
1. Can you please confirm whether what type of SSO concept has been configured....whether Logon Tickets or user mapping?
If logon tickets, just check once if the same user-id exists on both systems.....
2. Can you also try pinging & testing the JCo in hte SLD....just confirmation.
Awaiting Reply.
Warm Regards,
Ritu

Satellite Pro P100: What is the Toshiba part number for a 2GB memory module

Unable to find any way of emailing this question so I have posted it on the forum. Sure this info should be more readily available without having to ask.
What is the Toshiba part number for a 2GB memory module for a PSPA4E-00F007. That's for a Satellite Pro P100 T2400
http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie=yes&PRODUCT_ID=115421
Crucial Memory gives me this module - is that correct?
http://www.crucial.com/uk/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304
Found this via Kingstons site - is this also correct?
http://www.dabs.com/productview.aspx?QuickLinx=4P3V
Would really appreciate some official clarification here.
Many Thanks

It must be PA3513U-1M2G. You must check if this module is compatible with your notebook model. I think so.
Anyway I recommend you to buy high quality product like Kingston modules.

Local Director SNMP for CPU and Memory

Is there any way to get the CPU and memory utilization from a Local Director using SNMP? When I do an SNMP walk, I don't see any objects for CPU and memory.
Thank you

There's a "Show cpu " commmand availabe. Type help or '?' for a list of available commands.

SNMP OID for CPU and Memory Utilization on a MDS 9509

Does anyone know what the OIDs are for CPU and Memory utilization on a MDS 9509?
Thanks

CISCO-SYSTEM-EXT-MIB.my is a good place to start and you can determine the OID from the MIB.
Once you feel as though you are on the right track, have a look at:
http://www.oidview.com/mibs/9/CISCO-SYSTEM-EXT-MIB.html
I gather that what you need is:
1.3.6.1.4.1.9.9.305.1.1.1
and
1.3.6.1.4.1.9.9.305.1.1.2
Enjoy.
Stephen

OID for CPU and MEMORY utilization for wrv4400n

Hi,
Can any one please tell me the OID for CPU and MEMORY utilization for wrv4400n?
Thanks
Vipin

CISCO-SYSTEM-EXT-MIB.my is a good place to start and you can determine the OID from the MIB.
Once you feel as though you are on the right track, have a look at:
http://www.oidview.com/mibs/9/CISCO-SYSTEM-EXT-MIB.html
I gather that what you need is:
1.3.6.1.4.1.9.9.305.1.1.1
and
1.3.6.1.4.1.9.9.305.1.1.2
Enjoy.
Stephen

Unable to create the portable home directory for this user

This is driving me nuts!
I have a network user who I can login to on any machine on the network. I want a PHD to be created on a laptop and eveytime I answer 'yes' to 'create PHD for this user' I get the "unable to create the PHD for this user" message.
What am I doing wrong?

I fixed this by unbinding the laptop from the od server as I had used this user previously for PHD's on this machine. Setting up the machine to bind to OD again and all is well.

Unable to read the source URL error for cffeed

Hi,
I am using the cffeed to read from my twitter RSS feed but I get this error:
Unable to read the source URL.
Status Code: 400. Try adding or changing UserAgent attribute in the CFFeed tag
My code is:
<cfset feedurl="http://twitter.com/statuses/user_timeline/somenumbers.atom" />
<cffeed
source="#feedurl#"
properties="feedmeta"
query="feeditems1" overwrite="true" />
It works but suddenly it stops and it takes time about 15 minutes or more to work again.
Can any body help me with this?
Thanks,
Mandana

One thing which I did not mentioned is I want to have 6 pages rss feed together and I made it like this:
<cffeed
    source="#feedurl1#"
    properties="feedmeta"
    query="feeditems1" overwrite="true"
    useragent="Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0; GTB6.6; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C; AskTbBLPV5/5.11.3.15590)" />
   <cffeed
    source="#feedurl2#"
    properties="feedmeta"
    query="feeditems2" overwrite="true"
    useragent="Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; WOW64; Trident/4.0; GTB6.6; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C; AskTbBLPV5/5.11.3.15590)"/>
I did it for 6 pages, each one with one cffeed and then:
<cfquery name="feeditemstotal" dbtype="query">
    select * from feeditems1
    union
    select * from feeditems2
    union
    select * from feeditems3
    union
    select * from feeditems4
    union
    select * from feeditems5
    union
    select * from feeditems6
</cfquery>

What is the latest kernel number for CPU July 2013

Hi All,
have any one patch CPU July 2013 already?
I want to know what is the latest kernel number after you applied the CPU July 2013 reported by uname -a?
is it 148888-03?
Thanks

Hi LCromwell, I can help you with the most updated software for your Blackberry 9850. I understand what it means to have the most update software so your phone can function the best possible. I show the most updated software for your device is 7.1.0.163 . Here is a link for information and steps for updating the software on your device http://bit.ly/OCOllA . I hope this information was helpful. ^KH

Unable to interpret the prtdiag o/p for CPU Slots & Memory DIIMS - V890

Similar Messages

Maybe you are looking for