Unable to join Airport Network

I am being baffled by a network problem.
I have 2 Macs, a MBP 17 inch running Snow Leopard and an old Powerbook G4 running 10.4. Both connect to a no security (ie no password wireless) network at home. "Suddenly" the MBP will not join the wireless network (A DSL model D-Link). Error message when running diagnostics of "Unable to join Airport network.....". The G4 works just fine.
Have tried rebooting both devices ie the MBP and the D-Link. The MBP will work fine with a cable attached to the D-Link but not wirelessly!
Also, the MBP can see the Powerbook in the FINDER under "Shared".
Any ideas?
Thanks
BF

Yeah, thanks Bob, I got my MBP Safari to talk to D-Link via the http://10.1.1.1 address, put in a WEP password. Saved the changes and restarted the router. When I connect via Airport it asks for a password - I type it in then it times out. Then I went to the Powerbook and the Vista machine and they connected fine. I used my iphone and told it the password and it also worked fine.
I prefixed it on my MBP with $ and without $ - all to no avail. I am starting to think maybe the MBP wants a WPA password for some reason. It worked fine until last night! Very strange indeed. Any more ideas?
What gets me is that one moment it works and the next it is dead as a dodo...

Similar Messages

  • Unable to join airport network - Totally perplexing

    Hi
    I work remotely from home. I have an intel iMac as my desktop and a macbook for when I am out and about. For a few days now I have been having enormous problems with my internet connection. I use Airport Express (n) to connect via my modem in another room.
    I cannot get any connection to the internet on my iMac, yet I connect fine on my Macbook sitting 6 inches from it, both using the same Express.
    When I run network diagnostics on the Imac it goes through the usual checks, green buttons up to 'Internet' and then asks what network to join, scans and finds the network that my Macbook is on. I type in the password and I get an 'Unable to join Airport Network' Trust me the password is right and I have checked it via keychain.
    I am completely perplexed why two computers using the same wifi settings a few days have changed where only one can.
    Any thoughts?
    Thanks Jon

    To rule out wireless encryption, if you temporarily disable encryption on your 802.11n AirPort Express Base Station's (AXn) wireless network, can the iMac connect now? If so, try using WPA2 Personal for your encryption setting and try again. How about now?

  • Unable to Join the network ...

    I've seen similar posts with the same title but none of these solutions work for me. The problem is that I can not connect to my home Wi-Fi network. Following are the details:
    - I have a new iPod Touch with OS 2.2.1
    - My wireless router is an Airport Extreme running 7.4.2
    - My wireless security is WPA2 Personal
    - I have no problem connecting other devices such as Mac laptops and desktops so I know the correct password and the usual settings
    - I have also been able to connect my Touch to another wireless network with WPA2 security! This leaves me to believe there must be some incompatible setting on my Airport Extreme.
    - I have gone through the various trouble-shooting steps on Apple's support site, to no avail. I have reset both the Touch and the Airport many times
    - The Touch can see my network but when I enter the (correct) password I get the error "Unable to Join the Network ..."
    Any help would be appreciated! I can certainly take my Touch to my local genius bar, but that won't help if the problem is with my Apple wireless router.

    If you can see your network, then you are at least not making the same mistake as many AE users - leaving the router broadcasting in N mode only.
    Are you using anything like MAC address filtering on your network? Is DHCP on? The easiest thing you can try is a) reset the touch network settings; b) log back into your network using Settings > WiFi > Other network and re-entering your network name (case sensitive), security, and password (also case sensitive).
    Try that and let us know what happens.

  • Unable to join WiFI network

    Can anyone help? EDGE is working fine for me, but I want to go a bit faster when I an at Home and connect to my mac's airport. Do I have to have a airport base station to accomplish this? My IPhone is reconizing my mac, but I keep getting "unable to join the network 'myname's iMAC G5'". I am getting a strong signal (from the airport drop-down menu) and I have "use interference robustness" turned on, but still unable to connect. Any advice? Thanks

    Allan is right, if your iMac G5 is sharing it's network connection, that is what the iphone is picking up.
    If this is the case, on your iMac, try going into your system preferences > sharing and turn off internet sharing.
    Then power off your iphone and power cycle your airport. Then turn your iphone back on and check to see if the iphone sees your airport network.
    If it does not see your network, the airport might not be broadcasting the network name. This can be set up for security reasons.
    Go into settings > wi-fi and choose other. This will allow you to put in the name and password of your network.

  • HT1145 i am unable to connect to my wi-fi  it is telling me \unable to join the network  (applenotebook)  my other laptops join with no problem   help!

    I am unable to connect to wi-fi with my applenote book... had no problem a week ago.. its telling me    unable to join the network   my other laptop works ok
    tried turning it off

    Are you using an Apple AirPort Base Station? Try restarting it, as well as your laptop.

  • Unable to join the network on Iphone 4

    I am unable to join WIFI network in my house all my computers are able to join but when I try on my phone I receive error message Unable to Join the Network. I have tried reseting network settings and rebooted phone. Nothing is working. Anyone have any advice.

    Hi mcctigger,
    I know it can be frustrating when you can't get on the internet.
    Sounds like you've tried a few things, but I would suggest you follow the steps in the article below in the order presented:
    iOS: Troubleshooting Wi-Fi networks and connections
    Basic troubleshooting
    Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
    Verify that you are in range of your Wi-Fi router or base station.
    Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
    Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
    Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
    If you are still experiencing a Wi-Fi issue after trying the above, choose the symptom below that closely matches your issue:
    If you're unable to join a nearby Wi-Fi network
    Try restarting your Wi-Fi router by turning it off and then on again.
    Note: If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    When joining an 802.11n Wi-Fi network, ensure that your router is properly configured. See this article for more information.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings, including passwords, VPN, and APN settings.
    Hopefully you will be up and running again soon!
    - Judy

  • Receiving "Unable to join the network..." message.

    I really hope someone can help. I have an iPod Touch 4G and I'm trying to get on to my network. Every time I enter my password I receive the message "Unable to join the network" I am able to connect and use the Internet if I disable security but I don't want to do that. I have tried all 11 channels and encryption types WPA, WPA2 and WEP. I am not very knowledgeable when it comes to networks and routers. My router does seem to be working fine. I even changed my router's password a few times and that didn't seem to help. This is very frustrating and I would greatly appreciate any help. Thank you in advance.

    I am also having the same problem whereas my iPod Touch 2G worked flawlessly before 4.1 I think.
    Now I get random periods where it gives me the 'Unable to join the network" window even though it sees the network and has logged on many times before. I'm using an Airport Extreme and my Mac Mini has never had a problem connecting. Everything is properly updated, I've tried restarting the router, restarting the iPod, and resetting my network settings on the iPod.
    This is one of those things that really irritates me about iOS. "Unable to join network" isn't enough information and theres no utilities that one can use to test the hardware of the device. There's no way for me to know whether the iOS is buggy or if the iPod has a problem with the wi-fi antenna, for example. I wish I had TechTool Pro for iPod. My guess is that there's a bug in 4.2.1 with wi-fi considering how many people are reporting wi-fi problems, but I really can't tell. All I know is everything worked fine before, now it doesn't even though the router is working properly.

  • TS1398 My i-phone model MD654LL/A serial F17JWNAF8H2 says "Unable to join the network "sunday".  This is my WIFI network I have had for years.   My I pad has no problem connecting, but not my i-phone. I just tried my daughter's i-phone and it has same pro

    My i-phone cannot connect to my wi fi-all of a suddon.  My wife's i-phone 4 is connected to the wi-fi network.
    I just tried to connect my daughter's i-phone 5, and could not connect message came up "unable to join the network "Sunday".
    My I-pad is connected to Sunday also.
    I tried the reset routine, and when I try to get on line, it asks for my password.  I put it in and it stll says unable to hoin message.
    Can someone help?

    Reset your network settings. Settings>General>Reset>Reset Network Settings

  • HT4623 Hi having difficulty connecting to wifi following upgrade to 7.0.4 for an iPad 4.  Have done a complete power down and restart , no luck.  Unable to enter a password to the home locked wifi. Message coming back Unable to join the network ".........

    Just installed iOS 7.0.4 on the ipad, and can no longer connect to my home locked wifi.  I choose the home wifi network and the message comes back with   Unable to join the network "............"    Dismiss.  There is no prompt for the password for the locked network. . . .  Any suggestions  . . . . .

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • New iPod Unable to join the network after inputting password

    Got my iPod this am..
    looked too good to touch no pun intended.
    I went through the instructions, interrupted with an offer to update_, which I did.
    I then saw that the iPod was off line and went to set up the connection.
    I do have a Time Capsule but I just use it as an external drive, I use Ethernet connections between it my Netopia router/modem which provides my Wi Fi for another computer.
    I have a WPA-PSK security on the Netopia.
    My Wi Fi shows up on available networks, I am asked for my password but then I get a message "Unable to join the network"
    I must admit that my password is long (and a bit racy) my fingers a bit big, but I know that I have got it right on at least a few occasions.
    I have tried entering the details on "Other network" with the same result.
    Could my WPA-PSK be a problem?
    I would be most grateful for any suggestions.
    Various forms of this problem have appeared on this forum, but I think mine is a bit different.
    Thank you.

    Thank you.
    Went through that pretty well.
    Finally solved it in 2 steps.
    1. reset my modem/router to factory settings.
    Odd situation, wireless settings, but dependent on ethernet connection.
    2. read a post from Hong Kong re strange network settings.
    On his advice, into network, changed location from Automatic to one of my choosing.
    Bingo! everything came good.
    Totally wireless connection. iPod jumped to it. Isn't it great when everything comes together?
    I still wonder why it didn't take the signal from the WiFi part of my Modem/Router?
    Probably just as well as it sorted my Time Capsule connections out, probably for the first time since I bought one back in early 2008, and its recent replacement when it joined the epidemic of sudden death recently.
    Cheers

  • I just returned from Europe and my ipad will not connect to my home WiFi. It keeps giving me the message ""unable to join the network "Pepper".  This is my known home network.

    I just returned from Europe and my ipad will not join my home WiFi network.  It keeps giving me the message "Unable to join the network"  Any ideas?
    I turned off my airplane mode.

    "That was Easy!"  Thanks!

  • I bought a used ipod that I'm trying to set it up and it isn't letting me join my home wi-fi network. So I turn it on and I pick language, then country, then my wi-fi network. When I put in my password it says  -Unable to join the Network.  please help!!!

    I bought a used i-pod touch 4 gen that I'm trying to set up.  It isn't lettting me join my home wi-fi network. So I turn it on and I pick language, then country , then my wi-fi network.  When I put in my password is says - unable to join the network.  I have 4 other Apple products that I have that are working fine.  Please help

    Badunit you said "Continue setting up without the network. You can skip past it, right?"
    It sounds like he is setting up the iPod via wif. You can't continue. What yo can do is reset the iPod
    - Reset the iOS device.
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then start the setup over again but this time connect the iPod to a computer and set up via iTunes. Then he can troubleshoot the connection proboem.

  • When I try to connect to the wi-fi net work at my work place on my new iPad 3  I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home.

    When I try to connect to the wi-fi net work at my work place on my new iPad 3  I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home. I have already tried the following:
    turn wi-fi off and on again
    did a hard restart of my iPad
    reset network connections back to factory settings
    verified wi-fi is working as my computer accesses internet without issue.
    verified that my software is up to date.
    Does anyone have more suggestions?

    Couple of suggestions.
    First, many companies have a gateway on their networks that block non approved devices.  I work in such a place.  You might check with an IT guy , and see if they have a block in place.
    Second, the message you are getting means that you have not negotiated the security settings.  So either the password is wrong ( case sensitive), or, in some cases, they want a network key as opposed to your normal password.
    Again, if you can find one, talk to an IT guy and see if he has some suggestions.

  • IPhone 5 wi-fi "unable to join the network"

    My new iPhone 5 is my first iPhone and I've had it about a week.  I'm still in the process of setting it up but cannot connect to my home (secured) wi-fi.  I've been reading other Apple forums and Google suggestions and it appears this is a known Apple issue?  My phone came with iOS 6 installed so I have no update available.  I've turned off my router and shut off my phone, rebooting both but I still get an error message when entering our wi-fi password:  "unable to join the network".  I've turned off cellular and re-tried wi-fi to no avail.  I am NOT impressed with my first Apple product.  What a hassle.  Does anyone have any other suggestions to try or am I stuck waiting months for an Apple fix?

    There are a couple of things that you can try. First, try disabling the security on your wifi network and see if the phone will connect. Check the type of security you are using. Some have reported the iPhone reacts differently to some wifi security. Check to see if there is a firmware update to the router. This is usually the biggest culprit of the bunch. Once routers have been updated and restarted, troubles disappear.

  • I had no problem connecting to my network and now all of a sudden I can't connect.  Instead of prompting me for a password it comes back and says unable to join the network ("name") and then the option is Dismiss.  Anyone else have that problem?

    I had no problem connecting to my network and now all of a sudden I can't connect my iPad.  Instead of prompting me for a password it comes back and says unable to join the network ("name") and then the option is Dismiss.  Anyone else have that problem?  I've gone thru all my settings and can't seem to find a way to log into my network.  Don't get the option to put in my password.  It just give me the name of my network and option of dismiss instead of password.

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

Maybe you are looking for

  • ITunes launches unexpectedly

    After I quit out of iTunes, it will launch unexpectedly after about 30-60 seconds. I could be working in another program and iTunes will pop up on the screen. This is extremely annoying. Help! I have iTunes 7.3.1 (3) loaded.

  • How to print customer Sales Invoice directly from FI module?

    Hi, How to print customer Sales Invoice directly from FI module without using SD's t-code VF02 and VF03?

  • How to start X200 with lid closed? (for use as HTPC)

    I'd like to use my X200 as an HTPC with the lid always closed (and use the TV as the only monitor). Is there a way to start the X200 with an IR remote control (or some other way)? (so that the X200 can be off or in sleep mode when not being used) I d

  • Error - Expense without tax was found [Message 439-70]

    Hi I am Entering Purchase A/P Invoice base on purchase Delivary Note. I got the above Error. I already set all items in this invoice as excisable item. Please help me on this matter Regds Kishor

  • TM does not see my disk, but it shows up in finder.

    I have connected an external hard drive through a USB connection. Finder sees it, and it comes up on my desktop. My problem, however, is when I try to connect to Time Machine. It doesn't show up when I click "choose backup disk." I also plugged in a