Unable to join AP to controller

                   Hi All,
I’m having a problem of joining new Aps( Ari-ap1242G-E-k9 ) to the following wireless LAN controller. WLC details as follows,
Model No - AIR-CT5508-K9
Software Version - 7.0.116.0
AP Model - ARI-AP1242G-E-K9
AP console logs attached in Error.jpg file
Thanks,
Asa

I should have looked at your attachment first sorry about that.  Speaking of upgrades, have you considered upgrading the 5508 IOS?  7.2.111.3 has been out since September and may have a fix for the error you are running into.
Also someone ran into the same issue here: https://supportforums.cisco.com/thread/335438
They fixed this by changing the country code of the AP to be the same as the WLC.  3 people confirmed this before I stopped reading this post.
You can see how to configure the country code for the LWAPP using CLI from this document, page 8-108:
http://www.cisco.com/en/US/docs/wireless/controller/7.0MR1/configuration/guide/cg_lwap.pdf

Similar Messages

  • WLC 4402 & 1550 {Unable to join controller}

    Hi guys,
    I have a 4402 wlc with some 1232ap's successfully joined.
    I'm trying to add a Aironet 1550 as well but inable to do so.
    Went into the ap via console and here are the messages received (in a continuous loop)
    *Sep 17 14:10:21.511: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Sep 17 14:10:21.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.17.1.21 peer_port: 5246
    *Sep 17 14:10:21.511: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.17.1.21 peer_port: 5246
    *Sep 17 14:10:21.511: %CAPWAP-5-SENDJOIN: sending Join Request to 172.17.1.21
    *Sep 17 14:10:21.511: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.17.1.21
    *Sep 17 14:10:31.611: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Sep 17 14:10:32.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.17.1.21 peer_port: 5246
    *Sep 17 14:10:32.511: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.17.1.21 peer_port: 5246
    *Sep 17 14:10:32.511: %CAPWAP-5-SENDJOIN: sending Join Request to 172.17.1.21
    *Sep 17 14:10:32.511: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.17.1.21
    *Sep 17 14:10:32.511: %DTLS-5-SEND
    % CDP is not supported on this interface, or for this encapsulation_ALERT: Send FATAL : Close notify Alert to 172.17.1.21:5246
    *Sep 17 14:10:32.515: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Sep 17 14:10:32.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.17.1.21 peer_port: 5246
    *Sep 17 14:10:32.507: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.17.1.21 peer_port: 5246
    *Sep 17 14:10:32.507: %CAPWAP-5-SENDJOIN: sending Join Request to 172.17.1.21
    *Sep 17 14:10:32.511: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.17.1.21
    *Sep 17 14:10:32.511: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.17.1.21:5246
    *Sep 17 14:10:32.555: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
    *Sep 17 14:10:42.611: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    I should also add that 172.17.1.21 is my ap management interface.
    Any idea how I can resolve this? What can be the possible cause?
    Not too familiar so any assistance will be welcommed.
    Thanks!

    Thanks for the response and I apologise for not getting back on this sooner!
    At the time I had already checked the various software releases for compatibility issues but that wasn't the problem.
    I overlooked the country code configuration and assumed that my ap was carrying that of the US!
    Here's a guide I followed for properly configuring multiple country codes on the WLC's end.
    http://www.cisco.com/en/US/docs/wireless/controller/7.0MR1/configuration/guide/cg_lwap.html#wp1886967
    Hopefully it can be of use to someone else in future who meet this problem.

  • Unable to join domain when OD Master is set up as PDC

    Hi all,
    I'm working on trying to get my OD server to authenticate our new windows vmware workstations. I have both LDAP and Kerberos set up, and everything works really well with my OS X clients, as do our Linux servers. However, I'm unable to get our windows clients authenticating. I can browse the "spidertracks" computer as well as the Samba shares, so the shares themselves are working. I'm simply unable to join our Windows 7 64Bit clients to the domain to authenticate with OD accounts. Here is what I have configured in the samba settings. Am I missing something? I've read the manual nearly 20 times, and joining the domain simply doesn't work, so I'm guessing I've missed a configuration somewhere when creating my Kerberos realm. Is there a command I can use to validate my samba settings are correctly running as a PDC?
    Thanks,
    Todd
    LDAP config dc=spidertracks,dc=local
    Kerberos Realm: SPIDERTRACKS.LOCAL
    Samba Settings
    MAIN
    Role: Primary Domain Controller
    Description: Spidertracks
    Computer Name: Spidertracks
    Domain: SPIDERTRACKS
    ACCESS
    Authentication: NTLMv2 & Kerberos, NTLM
    ADVANCED
    Wins Registration: Enable Wins Server
    DHCP Settings (on different machine, Free BSD Based)
    WINS Server: 10.0.1.11 (My OD server's IP)

    Bump:
    Rather than starting a new thread,
    I am fighting with the same thing on one of our servers, this is an issue that was fixed by the Samba guys, but I can't deploy their fix and still use OD.
    I'm starting to think that our experiment using OSX instead of linux as a server may be at an end, I keep spending a lot of effort chasing down issues that are solved months ago on linux.
    Somebody help, I dont want to be told to get rid of the shiny Mac ( or more likely bootcamp it to linux )
    --Bill

  • LAP join the wrong controller

    Hello everybody,
    I have an issue with my LAP and my two WLC. I have one WLC in production and another one in test, and I want to associate the LAP with the one in test but I can't, and my LAP join the WLC in production with this messages on the LAP :
    *May 13 13:17:07.999: %CAPWAP-3-ERRORLOG: Selected MWAR 'TESTWLC'(index 0).
    *May 13 13:17:07.999: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *May 13 13:16:03.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.30.117.10 peer_port: 5246
    *May 13 13:16:03.036: %CAPWAP-3-ERRORLOG: Failed to authorize controller using trust config.
    *May 13 13:16:03.036: %CAPWAP-1-SSC_CERT_AUTH_FAILED: Failed to authorize controller, SSC certificate validation failed.Peer certificate verification failed FFFFFFFF
    *May 13 13:16:03.040: %CAPWAP-3-ERRORLOG: Certificate verification failed!
    *May 13 13:16:03.040: DTLS_CLIENT_ERROR: ../capwap/base_capwap/capwap/base_capwap_wtp_dtls.c:447 Certificate verified failed!
    *May 13 13:16:03.040: %DTLS-5-SEND_ALERT: Send FATAL : Bad certificate Alert to 172.30.117.10:5246
    *May 13 13:16:03.041: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.30.117.10:5246
    *May 13 13:16:03.042: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 3 combination.
    I have disabled certificate checking, regulatory domain are the same between WLC and LAP, my LAP(1041), my WLC are updated with the good software version and the both WLC are "Virtual" WLC.
    If you have any idea to resolve this problem, I will be happy to know it :)
    Thanks

    (Cisco Controller) >show sysinfo
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.6.110.0
    RTOS Version..................................... 7.6.110.0
    Bootloader Version............................... 7.6.110.0
    Emergency Image Version.......................... 7.6.110.0
    Build Type....................................... DATA + WPS
    System Name...................................... TESTWLC
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1631
    IP Address....................................... 172.30.117.10
    System Up Time................................... 1 days 15 hrs 40 mins 5 secs
    System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin, Rome, Vienna
    System Stats Realtime Interval................... 5
    System Stats Normal Interval..................... 180
    Configured Country............................... LU  - Luxembourg
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 1
    Number of Active Clients......................... 0
    Burned-in MAC Address............................ 00:50:56:94:0E:12
    Maximum number of APs supported.................. 200
    TESTLAP#sh version
    Cisco IOS Software, C1600 Software (AP1G2-K9W8-M), Version 15.2(2)JB, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2012 by Cisco Systems, Inc.
    Compiled Tue 11-Dec-12 04:45 by prod_rel_team
    ROM: Bootstrap program is C1600 boot loader
    BOOTLDR: C1600 Boot Loader (AP1G2-BOOT-M) LoaderVersion 15.2(2)JAX, RELEASE SOFTWARE (fc1)
    TESTLAP uptime is 15 hours, 36 minutes
    System returned to ROM by power-on
    System image file is "flash:/ap1g2-k9w8-mx.152-2.JB/ap1g2-k9w8-mx.152-2.JB"
    Last reload reason:
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-CAP1602I-E-K9    (PowerPC) processor (revision B0) with 98294K/32768K bytes of memory.
    Processor board ID FGL1807S09R
    PowerPC CPU at 533Mhz, revision number 0x2151
    Last reset from power-on
    LWAPP image version 7.4.100.0
    1 Gigabit Ethernet interface
    2 802.11 Radios
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 18:E7:28:1A:3B:1B
    Part Number                          : 73-14671-04
    PCA Assembly Number                  : 000-00000-00
    PCA Revision Number                  :
    PCB Serial Number                    : FOC18045ZD1
    Top Assembly Part Number             : 800-38552-01
    Top Assembly Serial Number           : FGL1807S09R
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-CAP1602I-E-K9
    Configuration register is 0xF
    As you can see, I use the LU country code, maybe it can be a mismatch between the WLC version and the LAP version?
    Thanks.

  • Can there be a hardware issue on the iPad that causes you to unable to join wifi networks or only if you are within 5 feet of routers?

    I used to be able to connect my iPad to my house wifi network walking all over my house then one day it stopped.  When i tried to connect to my network I would get an message saying "Unable to Join network".  I found that if i was within 5 feet of my router it would connect and work just fine.  At the same time I tried it at multiple other networks that I have before (girlfriends and other friends houses) and could not connect with same issue.  Only place I can connect is my work wifi.
    Can connect to wifi with my iPhone with no issues
    I have reset my network connections
    Reset my house router
    Upgraded to iOS6

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    Try This - Renew IP Address:
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Unable to join network after 3.0.1

    I "upgraded" my iPhone from 3.0 to 3.0.1 last thursday and since then have been unable to join any of my wireless networks. I've been able to join all of these networks via my laptop so I know it isn't the APs. I reset the network settings on the phone via Settings->General->Reset->Reset Network Settings. Still nothing.
    Anyone else having this trouble? Any easy solution? Should I attempt to go back to 3.0?

    It has nothing to do with 3.0.1, which was a minor change to the SMS app. You probably have corrupted data in the backup that was restored when you did the update. Thus, going back to 3.0 won't fix it. You need to fix it in 3.0.1. Try first forgetting your network in WiFi settings for it. Then reboot and try to connect again. If that doesn't fix the problem then do a Restore in iTunes and choose to set up as a new phone. Test before adding back any apps or email accounts.

  • Unable to join online games with 10.5.1, 2 or 3.

    So, basically I have a problem as well as some of the other friends I have. The problem is that I'm rarely able to join certain users of the game that I play online on gameranger called " Age of Empires II." This problem hasn't bothered me until lately, because usually it's always me that hosts the game (which works fine by the way) However, when I jump over to a game room that I'm not hosting, I am able to join the actual Pre-game room, but then once the host presses "Start" I get the "Unable to Join game" message. And before you ask, IP joining does not work either. I have a few other friends with the exact same problem, same OS, same issue. I've been told that this has to do with the settings in my router, well, I don't have a router, just a modem. I've called my ISP and they have said that the modem is set (by default) to not block any connections going in or out. I have my firewall tab set to "allow all incoming connections" as well. I'll say right now that there are actually a few select hosts that I can join with, only a few, and when I talk to them, they say they have a 10.5 OS and I can join their game just fine. So if I figure out what they did to enable me to join them, then it should work the other way around. So my question is, what did those few hosts do to their computer to make it so I could join?

    No firewall on, the firewall tab in my security pane is set to "allow all incoming connections" is there another firewall that I need to worry about?

  • Unable to join network after dropping my ipod in the water... anyone know a solution?

    I put my ipod in the pocket in the back of my jeans and when i went to the washroom, it fell into the toilet... I immediatey took it and dried it with a hairdryer and then a few hours after.. it was able to reopen again, but im unable to join my network ever since then...
    Anyone can help me? Thanks.

    Does it see any networks?  If wifi is dim or grayed out see:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    However, it is frequently a hardware problem.
    If can se networks, try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Powering off and then back on the router
    - Resetting network settings: Settings>General>Reset>Reet Network Settingds
    - The roubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • My Iphone 4 wont allow me to log into my wireless internet. It keeps saying unable to join user. What can I do to fix that?

    I just updated my software to the 7.06 version on my Iphone 4 and after I did that, I had trouble accessing my wireless internet. I have put in the correct password and it just keeps popping up "Unable to join the network". Does anyone know what I can do to access my wireless internet at my house on my Iphone?

    I just updated my software to the 7.06 version on my Iphone 4 and after I did that, I had trouble accessing my wireless internet. I have put in the correct password and it just keeps popping up "Unable to join the network". Does anyone know what I can do to access my wireless internet at my house on my Iphone?

  • TS1398 My i-phone model MD654LL/A serial F17JWNAF8H2 says "Unable to join the network "sunday".  This is my WIFI network I have had for years.   My I pad has no problem connecting, but not my i-phone. I just tried my daughter's i-phone and it has same pro

    My i-phone cannot connect to my wi fi-all of a suddon.  My wife's i-phone 4 is connected to the wi-fi network.
    I just tried to connect my daughter's i-phone 5, and could not connect message came up "unable to join the network "Sunday".
    My I-pad is connected to Sunday also.
    I tried the reset routine, and when I try to get on line, it asks for my password.  I put it in and it stll says unable to hoin message.
    Can someone help?

    Reset your network settings. Settings>General>Reset>Reset Network Settings

  • HT4623 Hi having difficulty connecting to wifi following upgrade to 7.0.4 for an iPad 4.  Have done a complete power down and restart , no luck.  Unable to enter a password to the home locked wifi. Message coming back Unable to join the network ".........

    Just installed iOS 7.0.4 on the ipad, and can no longer connect to my home locked wifi.  I choose the home wifi network and the message comes back with   Unable to join the network "............"    Dismiss.  There is no prompt for the password for the locked network. . . .  Any suggestions  . . . . .

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • Ipad unable to join network

    iPad mini, using my network just fine for several weeks now.  Was having a problem with online games loading, so went to wi-fi settings and clicked "Renew Lease".  Now I can no longer connect.  Keeps telling me "unable to join network".  Laptop connects fine.  Turned iPad off, forgot network, nothing works.

    Usually it's because you are not connecting to the internet via wifi.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • My ipad mini is not connecting to the wifi network. I have the correct network and password chosen, but the message I get is that "unable to join". I have reset my ipad and it still says the same thing.  What can I do about this.

    My ipad mini is not connecting to the wifi network. I have the correct network and password chosen, but the message I get is that "unable to join". I have reset my ipad and it still says the same thing.  What can I do about this?

    Hey Dr kris,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand that you are having issues connecting to Wi-Fi networks with your iPad mini. The following troubleshooting assistant may lead to a resolution:
    Apple - Support - iPhone - Join a network Assistant
    http://www.apple.com/support/iphone/assistant/wifi/
    For more in-depth troubleshooting, refer to the following article (refer to the "Unable to connect to a Wi-Fi network):
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Thanks,
    Matt M.

  • How to join a Domain Controller Server to an two-tier (SQL Server 2012) and Sharepoint 2013 (SP2013) farm

    Hi,
    I am trying to build a 3-tier SharePoint 2013 farm.
    1. SQL Server 2012, Windows 2012 VM
    2. DC Server, Windows 2012 VM
    3. SharePoint 2013, Windows 2012 VM
    I didn't built the DC server. Someone else did. However, I created about 14 service domain user accounts for SQL Server and SharePoint install and operation.
    I was able to join the SQL Server into the SharePoint server farm using SharePoint 2013 Product Configuration Wizard.  When I start the Central Admin, and click on Servers in the Farm, I only see the SharePoint server and SQL server,
    but the DC server is not listed.  Any suggestion on what did I miss?
    Thanks
    Jean

    You cannot join the Domain Controller to your SharePoint farm.  You must instead join each server from that farm to the domain that is served up by that DC.  You will want to uninstall SharePoint and probably SQL before you do this.  If it's
    an option, I would re-provision your VMs completely and start fresh.  Once you login to a new server, join that server to the target domain like this: 
    http://www.petri.co.il/join-windows-server-2012-to-domain.htm
    You'd have to ensure that your DNS resolves to the target domain on the server being joined to the domain.  If it doesn't, you can always use HOSTS entries to overcome that in the short term.
    Once you've joined both the future SQL and SharePoint servers to the domain, you can install SQL Server and then SharePoint on their prospective servers to create your farm.
    I trust that answers your question...
    Thanks
    C
    |
    RSS |
    http://crayveon.com/blog |
    SharePoint Scripts | Twitter |
    Google+ | LinkedIn |
    Facebook | Quix Utilities for SharePoint

  • New iPod Unable to join the network after inputting password

    Got my iPod this am..
    looked too good to touch no pun intended.
    I went through the instructions, interrupted with an offer to update_, which I did.
    I then saw that the iPod was off line and went to set up the connection.
    I do have a Time Capsule but I just use it as an external drive, I use Ethernet connections between it my Netopia router/modem which provides my Wi Fi for another computer.
    I have a WPA-PSK security on the Netopia.
    My Wi Fi shows up on available networks, I am asked for my password but then I get a message "Unable to join the network"
    I must admit that my password is long (and a bit racy) my fingers a bit big, but I know that I have got it right on at least a few occasions.
    I have tried entering the details on "Other network" with the same result.
    Could my WPA-PSK be a problem?
    I would be most grateful for any suggestions.
    Various forms of this problem have appeared on this forum, but I think mine is a bit different.
    Thank you.

    Thank you.
    Went through that pretty well.
    Finally solved it in 2 steps.
    1. reset my modem/router to factory settings.
    Odd situation, wireless settings, but dependent on ethernet connection.
    2. read a post from Hong Kong re strange network settings.
    On his advice, into network, changed location from Automatic to one of my choosing.
    Bingo! everything came good.
    Totally wireless connection. iPod jumped to it. Isn't it great when everything comes together?
    I still wonder why it didn't take the signal from the WiFi part of my Modem/Router?
    Probably just as well as it sorted my Time Capsule connections out, probably for the first time since I bought one back in early 2008, and its recent replacement when it joined the epidemic of sudden death recently.
    Cheers

Maybe you are looking for

  • Acrobat Reader XI fail to open file from unc path "Access Denied"

    Hi, When we try to open a pdf file from an unc path by double-click on it there is an error message : "There was error opening this files. Access Denied" If we do "File -> Open" the file open correctly. Same if we copy the file localy. After looking

  • Notification center reminders

    I am seriously unimpressed by the ios/ icloud reminders notification center syncing across apple devices. The software does not do what Apple advertise. I simply want to set up a reminder on my iphone or ipad for a set date and time; I want icloud to

  • Pcr To Get The Wage Type Value From Previous Years Master Data Records

    Hi I have an issue related to pcr.  I want to get the value of a wage type from previous year and it has to be added to another wage type.  Tried to write pcr by using the operation TABLE.  But i am not able to get the previous years data.  Request t

  • Directory Name Search

    Since upgrading to CCM 4.2(3) we are not able to search by first name from our IP phone directory. We can, however, search by last name and extension. I have looked at the xmldirectory.asp file but cannot determine if something has changed.

  • Does this drop-down menu work?

    http://www.correctionalassociation.org/ The top horizontal nav menu should have drop downs for all but "Donate"  If you can't see the the drop-downs, I would appreciate it if you'd post with your OS and browser number.  If you have any ideas about wh