Unable to join domain when OD Master is set up as PDC

Hi all,
I'm working on trying to get my OD server to authenticate our new windows vmware workstations. I have both LDAP and Kerberos set up, and everything works really well with my OS X clients, as do our Linux servers. However, I'm unable to get our windows clients authenticating. I can browse the "spidertracks" computer as well as the Samba shares, so the shares themselves are working. I'm simply unable to join our Windows 7 64Bit clients to the domain to authenticate with OD accounts. Here is what I have configured in the samba settings. Am I missing something? I've read the manual nearly 20 times, and joining the domain simply doesn't work, so I'm guessing I've missed a configuration somewhere when creating my Kerberos realm. Is there a command I can use to validate my samba settings are correctly running as a PDC?
Thanks,
Todd
LDAP config dc=spidertracks,dc=local
Kerberos Realm: SPIDERTRACKS.LOCAL
Samba Settings
MAIN
Role: Primary Domain Controller
Description: Spidertracks
Computer Name: Spidertracks
Domain: SPIDERTRACKS
ACCESS
Authentication: NTLMv2 & Kerberos, NTLM
ADVANCED
Wins Registration: Enable Wins Server
DHCP Settings (on different machine, Free BSD Based)
WINS Server: 10.0.1.11 (My OD server's IP)

Bump:
Rather than starting a new thread,
I am fighting with the same thing on one of our servers, this is an issue that was fixed by the Samba guys, but I can't deploy their fix and still use OD.
I'm starting to think that our experiment using OSX instead of linux as a server may be at an end, I keep spending a lot of effort chasing down issues that are solved months ago on linux.
Somebody help, I dont want to be told to get rid of the shiny Mac ( or more likely bootcamp it to linux )
--Bill

Similar Messages

  • Satellite P100: XP Pro Media Centre - unable to join domain

    Recently bought a P100 with XP Pro OS but I don't to be able to join the domain at work properly. Normally create a new account on the Server SBS 2003 then from the PC 'join domain'.
    Any clues?
    Peter

    Thanks for that but I do find it difficult to see where the logic comes from. It is fairly safe to say that XP Media Centre should work OK as I understand it to be a complete version/implementation of XP Pro with a few whistles and bells on the AV front? XP Pro certainly allows a domain to be specified so why doesn't XP Media Centre?
    Peter

  • My wife and I both have I phones4 . We have wifi in our apartment which I can access fine,her phone finds all the networks on our floor but when selecting ours , a message states,unable to join network.When she selects our neighbors network,it re

    My iPhone 4 can use our wifi network fine,but my wife's iPhone 4 gets the message unable to connect to network . If she selects our neighbor s network , it asks for their password . She can connect to our. Network with her iPad fine?
    AT&T said the phone was fine and selected their in store network without problem. The wifi provider said they could not help. Any thoughts?

    Maiko,
    I'm confess I'm still trying to get a handle on your problem. You do a fantastic job of describing it ... but I'm just trying to picture it accurately in my head.
    I think, were I in your shoes, I'd begin by looking at what the debug page has to say for the specific destination in which you're interested in fixing. In other words, I'm not clear on where, exactly, this destination points ...
    Destination illinois.edu.1945806043
    Is that your site, or the division within your site that you want to fix? "Normally", you do not need to specify a site handle to get to your site within your transfer CGI ... if you say "uillinois.edu", it's enough to transfer your users to iTunes U ... but every site still has a handle, and you could, if you wanted to, actually specify it in your transfer CGI. For example, this:
    Destination uic.edu.1139051993
    is for my entire site ... it's my site handle. Whereas this:
    Destination uic.edu.1991288441
    is for a division within my site ... but it's impossible to tell the difference between "site" and "division" from just the handle (I mean, if I didn't say "this is a site" and "this is a division", there'd be no way for you to know). So when I look at your creds and permissions on your debug page, I can't quite tell if they give you download access for your site, or for the specific division you want to fix. If you could open the debug page with your division as destination (or confirm that that's what we're looking at), it'd rule out some things.

  • Unable to Join Domain

    I bought  a new laptop running Windows 8.1 and when i tried to connect it to my Domain network, I found that Network ID button is disabled then i went to services.msc and check for workstation.... the service was already running. My Server runs on Windows
    2012.
    Please help....

    Hi,
    Make sure that you have install  "Client for Microsoft Networks" under Network adapter -> Properties.
    Kate Li
    TechNet Community Support

  • WDS Unattended Mode - unable to join domain with errors shown in UnattendedJoinDCLocator.etl

    Scenario 
    XP Client machine rebuild to Window 7 from PXE Boot image with unattended XML File (Verified Unattended XML is GOOD). From the UnattendedJoinDCLocator.etl
    indicate some errors. So far tried 4 machine with same error message.
    All machine are listed trusted domain and same network subnet.
    Error 1: 
    31: Cannot NdetpSrvNext 9003 0x232b
    Cannot find A record
    Error 2: 
    Sent out 'Sam Logon' message to \\prod.domain.com*\MAILSLOT\NET\NETLOGON on all transports
    NetpDCSendPing: cannot write netlogon mailslot: prod.domain.com 0x0 53
    NIBrowserSendDatagraam: returend 0x 35
    NetPDCGetNameNetbios: prod.domain.com : CannotNIBrowswerSendDatagram (ALT) 53
    NetDCGetName: NetDCGetnameNetbios returned 1355
    NetDCGetName: prod.domain.com: IP and Netbios are both done
    DsGetDCnamewithAccountW: DsLocalGetDCname returned0x54
    NetpDCGetDCNext: _ldap-_tcp.dc_msdcs.prod.domain.com.: Cannot Query DNS. 9852 0x267c
    NetpDcGetNameIp: prod.domain.com: IPnot configured from DnsQuery.
    NetDcGetname: NetpDcGeNameIp returned 9851
    .........message keep repeated. 

    Hello,
    WDS specific questions please ask in
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserversetup
    If I understand you correct you have 2 domains and the WDS is in the other domain that is trusted, which kind of trust? Or are they all in the same domain?
    How is DNS configured in the domain(s)?
    Please post an unedited ipconfig /all from the DC/DNS servers and also the DHCP scope settings you use for the WDS installation.
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • Px12-350r unable to re-join domain - what to do now?

    Hello everyone!
    I hope you can give me some advice because at the moment I am in a really stupid situation, being probably locked out of my Iomega px12-350r.
    Here's what happened:
     * The device has been successfully joined to my Microsoft AD domain and has been running with this config for at least a year.
    * I expanded the storage array 2 days ago, adding 2 disks. Everything went fine and when the expansion completed, the new total disk space was displayed correctly in the admin web interface.
    * After that, I rebooted the device. After the reboot, I could not log in to the device any more using my domain account. This account has had admin rights on the NAS and I have logged into the NAS using this account before. 
    * I did not change anything in the domain infrastructure.
    * I know that the device cannot join the domain anymore because I activated email notifications and it keeps sending me "Unable to join domain".
    I already tried:
    * Login using the usual local accounts: Does not seem to work once the device is joined to a domain.
    * Login via SSH. Does not work, probably for the same reason as above.
    I did NOT try yet:
    * The user manual mentions resetting the admin password by pushing the reset button on the back. But will this only reset config (I would be ok with that) or will it erase the data on the drives as well?
    I am from Germany. Despite having purchased a 24x7 service plan, German support hotline will only redirect me to the American hotline who claim to do only desktop NAS, no px12's. I am kind of in the middle of nowhere now. ;-)
    Thanks for your help!
    Best Regards,
    Florian
    Solved!
    Go to Solution.

    Hi qaware,
    Just to clarify, are you talking about logging into the device's web interface or logging into your active directory client?
    I would first recommend rebooting everything and restarting your client in case there are more than one sessions open.
    What credentials are you using to log into SSH? User should be "root" and password is "soho + admin password". Make sure you are not using any special characters.
    You could do a reset from the back of the device. This is not data destructive, but it will reset user and network settings so you will have to set the device up again, rejoin the domain and import the AD users and groups.
    Are there any other admin users you could try logging in under?
    Have questions and need answers?
    Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
    LenovoEMC Support & Downloads
    LenovoEMC North America Support Contact Page

  • Wi-fi working on other devices.  When trying to connect on ipad it states"unable to join network".  Some of my efforts have resulted in short term connection, but then I lose it again.

    anybody have any idea what would cause my wi-fi to state "unable to join network when all other devices are haveing no connection problem.?

    Try the remedies that are in this Apple support document on troubleshooting Wi-Fi.
    http://support.apple.com/kb/TS1398

  • Auto Join Domain using WAIK without install Operating System Image

    Hi all, i have a question.
    In my Environment, i have requirement like this :
    If user get new laptop with operating system already installed,
    is it possible to automatic join domain when user plug in LAN cable to their computer?
    I already explore about this and i found WAIK can help me to auto join domain, but i must install that OS image too.
    I just want to auto join domain, is it possible to skip install OS image process when i using WAIK?
    Can i get a solution for my requirement?
    Thanks for help!
    Best Regards,
    Henry Stefanus

    http://technet.microsoft.com/en-us/library/offline-domain-join-djoin-step-by-step(v=ws.10).aspx
    Help your self :)
    UMESH DEUJA MCP,MCTS,MCSA,CCNA

  • OD Master/PDC, 10.4.11, why xp clients unable to locate domain controller?

    After a migration/upgrade from 10.3.9 to 10.4.11 Server, windows XP clients are intermittently unable to log in to or even bind to the PDC running on that server.
    I did a clean format and install from the 10.4 media, choosing the standalone server type, and applied all the Software Updates, I got forward and reverse DNS working for my zone, then I followed the instructions at http://www.afp548.com/article.php?story=20050615173039158 to move my OD from a working 10.3.9 server to 10.4.
    This server goes against the usual recommendations, as it provides DNS, OD master, PDC and file services to 32 clients all in the same subnet, 20 running Windows XP SP2 and 12 running OS X Client 10.4.x or 10.5.x.
    File services and various other users of the OD/LDAP, for example Wildfire Jabber/XMPP server and Apache2/LDAP running on a separate Linux server, are able to authenticate against the new 10.4.11 OD.
    However, at this point the symptoms become intermittent approx. 40% of the Windows XP clients were unable to log in with various domain accounts, yielding errors of the form "Unable to find domain FOO". If I remove a client from the domain by joining it to WORKGROUP and rebooting, then try to join FOO again, I'll get an error, "Unable to locate Domain Controller for FOO..."
    The set-up:
    My server's FQDN is myserver.foo.example.com
    The server's DNS is authoritative for the 10.10.10.0/24, foo.example.com zone and I have the trailing dot's in the right places, so ping myserver.foo.example.com, ping myserver, and ping 10.10.10.10 (server's example IP from the foo.example.com zone) all work correctly.
    The DHCP server for this vlan is providing my DNS server to the clients, but is providing no netbios server. The XP clients are all set to use the DHCP server setting, which, according to the TCP/IP Advanced Settings panel, means that they'll revert to netbios over tcp/ip since no wins server is specified.
    In Server Admin->Windows->General:
    Role: Primary Domain Controller (PDC)
    Description: FOO Domain at example.com
    Computer Name: myserver
    Domain: FOO
    Server Admin->Windows->Access:
    Allow Guest Access: Check
    Client Connections: Unlimited
    Authentication: NTLMv2 & Kerberos, NTLM, and LAN Manager: All check
    Logging->Log Detail: High
    Advanced->Code Page: Latin US
    Services: Workgroup Master browser and Domain master browser: check
    WINS Registration: Off
    Homes: Enable virtual share points: check
    Should my Windows service on 10.4.11 be providing WINS or not? If so, should the DHCP server be set to point the clients to it? If not, how do the XP clients reliably resolve the FOO domain?
    Why did all these XP clients work fine with a 10.3.9 Windows PDC but don't work with 10.4.11?
    Another strange point - I can use the XP-side 'net view' command to poke around and things look reasonable. I.E. even the clients that aren't joined to the domain and can't locate the domain controller will return sane results for 'net view /domain:FOO'.

    The new PDC does use the same domain name as the old PDC, and the SID mismatch is at least partially to blame. After I'd performed the upgrade and confused the windows clients, I saw the advice on using samba's net command to duplicate the old PDC's SID to the new PDC. Maybe someday I'll have the opportunity to try that.
    I resorted to removing all the XP clients from the domain and re-joining them. The XP clients were still able to contact the domain intermittently. I used various command-line tools on the XP side, including the built-in net command as well as some others I downloaded such as the quite useful http://www.joeware.net/freetools/tools/findpdc/index.htm, as well as the client-side error messages during the domain join attempts and the messages in the Event log, to determine that the clients couldn't find the domain.
    The XP client TCP/IP settings state that the clients will revert to using netbios if no WINS server is specified, but that clearly wasn't working reliably, so I just enabled the WINS server on the PDC, told the DHCP server to hand out its address for the netbios-related options for that subnet, rebooted the PDC, waited a while for things to settle out, and now all the clients can reliably find the PDC.
    I still have no idea why the WINS-less set-up worked in 10.3 server but didn't work in 10.4 server, but believe me, I'll remember it now!

  • I bought a used ipod that I'm trying to set it up and it isn't letting me join my home wi-fi network. So I turn it on and I pick language, then country, then my wi-fi network. When I put in my password it says  -Unable to join the Network.  please help!!!

    I bought a used i-pod touch 4 gen that I'm trying to set up.  It isn't lettting me join my home wi-fi network. So I turn it on and I pick language, then country , then my wi-fi network.  When I put in my password is says - unable to join the network.  I have 4 other Apple products that I have that are working fine.  Please help

    Badunit you said "Continue setting up without the network. You can skip past it, right?"
    It sounds like he is setting up the iPod via wif. You can't continue. What yo can do is reset the iPod
    - Reset the iOS device.
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then start the setup over again but this time connect the iPod to a computer and set up via iTunes. Then he can troubleshoot the connection proboem.

  • TS1398 how to join wi-fi when it says unable to join?

    How to join Wi-Fi when i put the password and it still says unable to join?

    Does the iPod connect to other networks?
    Do other devices now connect?
    Did the iPod connect before?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • "Unable to join" when connecting to internet.

    I stopped using my iPod touch for a bit (4th generation) and I started using it again after two weeks or so. When I tried to connect to my internet, it gave me an "unable to join" message. I used to be able to connect fine.
    I have tried resetting network settings on my iPod, restarting my iPod, basic stuff like that.
    I believe it is worth noting that I have gotten a new router in the time I stopped using it-it is not the same model, but they are both Linksys. The new one is an E2500.
    Any ideas? This is really annoying-I can't do anything online or on the App Store.

    Hi,
    From the log of Android, I notice that the your “Server” machine has two IP address, 192.168.56.1 and 172.17.2.225. Which one is correct? And the IP address of “HTPC” machine is  172.17.2.205.
    From the log of IOS, I see that you were trying to connect to the “HTPC” machine. However, IOS cannot resolve the name to IP address.
    Therefore, please make sure that the IOS device and the “HTPC” machine are in the same network. Furthermore, please make sure that they have the same subnet mask and DNS settings.
    If issue persists, please let us know more details about your network topology.
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • When I try to connect to the wi-fi net work at my work place on my new iPad 3  I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home.

    When I try to connect to the wi-fi net work at my work place on my new iPad 3  I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home. I have already tried the following:
    turn wi-fi off and on again
    did a hard restart of my iPad
    reset network connections back to factory settings
    verified wi-fi is working as my computer accesses internet without issue.
    verified that my software is up to date.
    Does anyone have more suggestions?

    Couple of suggestions.
    First, many companies have a gateway on their networks that block non approved devices.  I work in such a place.  You might check with an IT guy , and see if they have a block in place.
    Second, the message you are getting means that you have not negotiated the security settings.  So either the password is wrong ( case sensitive), or, in some cases, they want a network key as opposed to your normal password.
    Again, if you can find one, talk to an IT guy and see if he has some suggestions.

  • I have a new iPad 2 which will not connect to my wi fi despite a new router being installed. When I tap my network name (which is with TalkTalk) the message comes up "unable to join the network TalkTalk etc...)

    I have a new Apple iPad2 which will not connect to my wi fi despite a new router.  When I tap the correct address it comes up with the message "Unable to join the network TalkTalketc... It does connect in other peoples' houses . Am I right in thinking that the trouble is with TalkTalk?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT204409 i'm receiving a message for unable to join the network when entering in the wifi password

    the message I'm receiving on the Ipad mini when entering the home network password is: Unable to join the network!!!

    If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
    First, test your iPad on some other networks: a friends, Starbucks, Barnes & Noble, etc.
    If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
    If your iPad does not function well on other networks it possibly has a hardware problem. Contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
    If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
    See also here: http://www.apple.com/support/ipad/wifi/

Maybe you are looking for

  • LabVIEW on MacBook with Boot Camp

    I'm interested in getting a MacBook Air to use as my personal computer, but I really need to be able to run all the work data acquisition hardware if necessary.  I primarily use a PXIe-6356, which I know is still unsupported in OS X for whatever reas

  • Nokia N8 : Retrieve deleted pictures or files

    Hi... i was trying make a new album in photo's menu so i can keep all my fav in one folder. i copied pics from ALL to ALBUM's new folder and then deleted the same pics in ALL folder but automatically all the pics in new folder got deleted. normally i

  • ResourceManager support for single-plural, feminine-masculine cases

    Hello, I am developping a large scale website with support for multiple languages. I am using the ResourceManager to manage the switch of languages by the user. It works OK, but I have some cases where I cannot find a proper solution. I wan to displa

  • Updating Registry in Global Package yields no change

    Having another odd issue.  I have an application, ProgramX. We are publishing it to machines (Global).  After publishing it to the end users machine (tester), an issue was found, but a simple registry change will fix it.  So I go into the package (Ed

  • Automatic Discovery of Nodes

    Hello, I installed the 10g agent on a host successufully. 10g OEM on another server did not discover the node automatically. I can manaually discover new nodes? Thank you in advance.