Unable to join my network with mcaffe firwall

i have mcaffe and i know that is the wirefall that blocked my connection. I don't know what to touch to fix it! Thanks

I am confused. You say you can't connect/join network because of the Mcaffe firewall. That would only prevent connecting if your computer was hardwired to your router and you configured your computer to act like a wifi hot spot. Is the the case? The normal configuration is to use a wifi router.

Similar Messages

I'm unable to join wifi network with talk talk

I can join another network but not my home one keeps coming up unable to join network. I have updated soft wear but no good

What security settings are configured on the talk talk WiFi network?
Did you enter the correct WiFi username and password when connecting to the WiFi network?

After getting 4G with AT&T I am unable to join my network and get the error message: Unable to join the network "Jude". How do I fix this? Thank you

After getting 4G with AT&T I am unable to join my network and get the error message: Unable to join the network "Jude". How do I fix this? Thank yo

Try power-cycling your wireless router (unplg for 30 seconds, plug back in). Here's a longer list of troubleshooting steps: http://support.apple.com/kb/TS1398.

I have a new iPad 2 which will not connect to my wi fi despite a new router being installed. When I tap my network name (which is with TalkTalk) the message comes up "unable to join the network TalkTalk etc...)

I have a new Apple iPad2 which will not connect to my wi fi despite a new router. When I tap the correct address it comes up with the message "Unable to join the network TalkTalketc... It does connect in other peoples' houses . Am I right in thinking that the trouble is with TalkTalk?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have an iPad 2 v6.1.3 that has a problem with connecting to wi-fi. My other I macs have no problem with connecting. The pad keeps coming up with unable to join the network. Nothing has changed with passwords--it just refuses to join my secure network.

My other Imacs and my wife's Ipad 3 have no problem with conneccting. My Ipad keeps coming up with unable to join the network. Nothing has changed with passwords--it just refuses to join my secure network. A couple minutes ago, it connected for 10 seconds, then dropped the connection. Is there a way to reconfigure the Ipad to fix this major problem, as we dropped our carrier (saved a bunch of money) and just went wifi.
Thanks so much for any help with resolving my connection problem.
Gary

Hello jaxgaryj,
The following article provides a number of potential resolutions for your WiFi issues.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Cheers,
Allen

HT1145 i am unable to connect to my wi-fi it is telling me \unable to join the network (applenotebook) my other laptops join with no problem help!

I am unable to connect to wi-fi with my applenote book... had no problem a week ago.. its telling me unable to join the network my other laptop works ok
tried turning it off

Are you using an Apple AirPort Base Station? Try restarting it, as well as your laptop.

Iphone3g 2.01 - wlan: unable to join the network "xyz" with netgear dg834n

i m not able to connect to my netgear dg834n with my new iphone.
every time i´m trying it i get this error:
unable to join the network "xyz"
tests i did:
- restart of iphone
- reboot of iphone
- switching of security (and mac address control) on netgear
- tryout of all wlan security combinations on netgear
- turned netgear off and tried again
- dhcp and manal settings on iphone for tcp/ip (netgear has dhcp enabled)
i m using the newest available firmware for dg834n
any help ?

Add me to the list. . .and it happened right after the upgrade to 4.2.1. . .
Coincidence or just just a factor of wear and tear. I've tried 3 calls to Apple and they say the phone needs to be replaced.
A bunch of youTube videos watched and instructions followed to no avail.
It seems that the wireless portion of the circuit board connection is prone to cracking in the iPhone. I'm finding references to this gremlin dating all the way back to 2008. I'm wondering if there is a connection with high swings in temperature of surroundings. One clue to whether cracking exists on Circuit board connections is to pop your phone into a freezer for about 10 minutes and see if this permanently or temporarily allows the phone to be able to connect. . .
The only successful fix I've seen is reflowing the Circuit board by putting it in the oven but that takes a couple of shots of good vodka before seriously trying that. . .There are plenty of Google links on both the preparation and the fix. . .8^]

I have my wifi in my home with secure connection when i get connected to it ,it asks me the password and when i entered it, it shows that unable to join the network why is this happening...........

i have my wifi in my home with secure connection when i get connected to it ,it asks me the password and when i entered it, it shows that unable to join the network why is this happening...........

You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

HT4623 Hi having difficulty connecting to wifi following upgrade to 7.0.4 for an iPad 4. Have done a complete power down and restart , no luck. Unable to enter a password to the home locked wifi. Message coming back Unable to join the network ".........

Just installed iOS 7.0.4 on the ipad, and can no longer connect to my home locked wifi. I choose the home wifi network and the message comes back with Unable to join the network "............" Dismiss. There is no prompt for the password for the locked network. . . . Any suggestions . . . . .

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

New iPod Unable to join the network after inputting password

Got my iPod this am..
looked too good to touch no pun intended.
I went through the instructions, interrupted with an offer to update_, which I did.
I then saw that the iPod was off line and went to set up the connection.
I do have a Time Capsule but I just use it as an external drive, I use Ethernet connections between it my Netopia router/modem which provides my Wi Fi for another computer.
I have a WPA-PSK security on the Netopia.
My Wi Fi shows up on available networks, I am asked for my password but then I get a message "Unable to join the network"
I must admit that my password is long (and a bit racy) my fingers a bit big, but I know that I have got it right on at least a few occasions.
I have tried entering the details on "Other network" with the same result.
Could my WPA-PSK be a problem?
I would be most grateful for any suggestions.
Various forms of this problem have appeared on this forum, but I think mine is a bit different.
Thank you.

Thank you.
Went through that pretty well.
Finally solved it in 2 steps.
1. reset my modem/router to factory settings.
Odd situation, wireless settings, but dependent on ethernet connection.
2. read a post from Hong Kong re strange network settings.
On his advice, into network, changed location from Automatic to one of my choosing.
Bingo! everything came good.
Totally wireless connection. iPod jumped to it. Isn't it great when everything comes together?
I still wonder why it didn't take the signal from the WiFi part of my Modem/Router?
Probably just as well as it sorted my Time Capsule connections out, probably for the first time since I bought one back in early 2008, and its recent replacement when it joined the epidemic of sudden death recently.
Cheers

When I try to connect to the wi-fi net work at my work place on my new iPad 3 I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home.

When I try to connect to the wi-fi net work at my work place on my new iPad 3 I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home. I have already tried the following:
turn wi-fi off and on again
did a hard restart of my iPad
reset network connections back to factory settings
verified wi-fi is working as my computer accesses internet without issue.
verified that my software is up to date.
Does anyone have more suggestions?

Couple of suggestions.
First, many companies have a gateway on their networks that block non approved devices. I work in such a place. You might check with an IT guy , and see if they have a block in place.
Second, the message you are getting means that you have not negotiated the security settings. So either the password is wrong ( case sensitive), or, in some cases, they want a network key as opposed to your normal password.
Again, if you can find one, talk to an IT guy and see if he has some suggestions.

IPhone 5 wi-fi "unable to join the network"

My new iPhone 5 is my first iPhone and I've had it about a week. I'm still in the process of setting it up but cannot connect to my home (secured) wi-fi. I've been reading other Apple forums and Google suggestions and it appears this is a known Apple issue? My phone came with iOS 6 installed so I have no update available. I've turned off my router and shut off my phone, rebooting both but I still get an error message when entering our wi-fi password: "unable to join the network". I've turned off cellular and re-tried wi-fi to no avail. I am NOT impressed with my first Apple product. What a hassle. Does anyone have any other suggestions to try or am I stuck waiting months for an Apple fix?

There are a couple of things that you can try. First, try disabling the security on your wifi network and see if the phone will connect. Check the type of security you are using. Some have reported the iPhone reacts differently to some wifi security. Check to see if there is a firmware update to the router. This is usually the biggest culprit of the bunch. Once routers have been updated and restarted, troubles disappear.

Unable to Join the network ...

I've seen similar posts with the same title but none of these solutions work for me. The problem is that I can not connect to my home Wi-Fi network. Following are the details:
- I have a new iPod Touch with OS 2.2.1
- My wireless router is an Airport Extreme running 7.4.2
- My wireless security is WPA2 Personal
- I have no problem connecting other devices such as Mac laptops and desktops so I know the correct password and the usual settings
- I have also been able to connect my Touch to another wireless network with WPA2 security! This leaves me to believe there must be some incompatible setting on my Airport Extreme.
- I have gone through the various trouble-shooting steps on Apple's support site, to no avail. I have reset both the Touch and the Airport many times
- The Touch can see my network but when I enter the (correct) password I get the error "Unable to Join the Network ..."
Any help would be appreciated! I can certainly take my Touch to my local genius bar, but that won't help if the problem is with my Apple wireless router.

If you can see your network, then you are at least not making the same mistake as many AE users - leaving the router broadcasting in N mode only.
Are you using anything like MAC address filtering on your network? Is DHCP on? The easiest thing you can try is a) reset the touch network settings; b) log back into your network using Settings > WiFi > Other network and re-entering your network name (case sensitive), security, and password (also case sensitive).
Try that and let us know what happens.

Unable to join Airport Network

I am being baffled by a network problem.
I have 2 Macs, a MBP 17 inch running Snow Leopard and an old Powerbook G4 running 10.4. Both connect to a no security (ie no password wireless) network at home. "Suddenly" the MBP will not join the wireless network (A DSL model D-Link). Error message when running diagnostics of "Unable to join Airport network.....". The G4 works just fine.
Have tried rebooting both devices ie the MBP and the D-Link. The MBP will work fine with a cable attached to the D-Link but not wirelessly!
Also, the MBP can see the Powerbook in the FINDER under "Shared".
Any ideas?
Thanks
BF

Yeah, thanks Bob, I got my MBP Safari to talk to D-Link via the http://10.1.1.1 address, put in a WEP password. Saved the changes and restarted the router. When I connect via Airport it asks for a password - I type it in then it times out. Then I went to the Powerbook and the Vista machine and they connected fine. I used my iphone and told it the password and it also worked fine.
I prefixed it on my MBP with $ and without $ - all to no avail. I am starting to think maybe the MBP wants a WPA password for some reason. It worked fine until last night! Very strange indeed. Any more ideas?
What gets me is that one moment it works and the next it is dead as a dodo...

'unable to join the network...' wifi network error ! please help, 'unable to join the network...' wifi network error ! please help

im on pay as you go.. still trying to set up wifi to my home network.. im putting in the password (sky broadband) and i keep getting the message
Unable to join the network...
driving me crazy now - please help !

Other possibilities:
Your router firmware is out of date. Check the manufacturer's website for an update
You have MAC (Media Access Control) filtering enabled on the router, that restricts access to "known" devices and the new iPhone is not on the table of known devices
Your router has a setting limiting the number of simultaneous allowed devices
Your routers SSID ("name") is still the default (e.g., LINKSYS, DLINK, NETGEAR, etc). Your phone has encountered other routers with the same name as you have traveled, and the phone is confused as to which router is the real one. If your router's name is still the default you should change it.

Unable to join my network with mcaffe firwall

Similar Messages

Maybe you are looking for