Unable to join the tables CDHDR, CDPOS
Hello,
I want to create a Query connecting tables CDHDR & CDPOS to extract cost center details which are changed. To be precise, when cost center details are changed using transactions KS02 & KS03, I want to extract those details and run the report. I am unable to join the tables using SAP Queries SQ01, SQ02, SQ03.
Kindly suggest me regarding the same.
Thanks in advance.
Regards
Sravan Mulumudi.
Hi Jeve,
I was testing the report S_ALR_87012308, but this displays changes done to G/L accounts. I have tried every possibility. Could you please explain further ?
Regards
Sravan.
Similar Messages
-
In query SQVI unable to join the table konv
Hi Guru's
I have a requirement from the user, extract the Open PO's with INCO TERMS and CONDITION TYPES.
1. what is the process to extract the OPEN PO's from table EKKO.
In normal process I can extract Open PO's from ME2L and for a perticular Open PO number i can get the INCO TERMS and DOC CONDITION number from table EKKO and by taking the DOC CONDITION number I can get the condition type from table KONV.
But I want to do this process in SQ01 how is it possible?
please help
Regards
ISMISM,
No. Such instructions are beyond the scope of these forums, or at least beyond the scope that I would be willing to cover. FYI SAP provides a class [BC407 Reporting|http://www.sap.com/usa/services/education/tabbedcourse.epx?context=%5b%5b%7cBC407%7c%7c%7c063%7cUS%7c%5d%5d%7c] to cover such topics. The class lasts for 2 days.
I can say that I have created a query that meets requirements that are similar to yours. It took me a couple of hours to rough out the original version for user testing, and a couple more hours to finalize for production. It is do-able.
Following is a link to the Query Help doc. This was the doc from which I learned SAP Query (I did have previous experience with other report writers) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
I have already given you the general methodology to obtain your data within SAP Query. If these guidelines are not adequate, then you would probably be better off engaging the services of a programmer to write a custom report.
Best Regards,
DB49 -
im on pay as you go.. still trying to set up wifi to my home network.. im putting in the password (sky broadband) and i keep getting the message
Unable to join the network...
driving me crazy now - please help !Other possibilities:
Your router firmware is out of date. Check the manufacturer's website for an update
You have MAC (Media Access Control) filtering enabled on the router, that restricts access to "known" devices and the new iPhone is not on the table of known devices
Your router has a setting limiting the number of simultaneous allowed devices
Your routers SSID ("name") is still the default (e.g., LINKSYS, DLINK, NETGEAR, etc). Your phone has encountered other routers with the same name as you have traveled, and the phone is confused as to which router is the real one. If your router's name is still the default you should change it. -
Hi there,
I recently had the following situation, where I changed the source of my CSV file in Power Query.
Once I had reloaded the file, it would then not load into Power Pivot. So I disabled the loading from Power Query into Power Pivot. I then enabled the loading to the Data Model. Which then successfully loaded the data into Power Pivot.
But once I went into Power Pivot, had a look, then saved the Excel file. Once saved I closed the Excel file. I then opened the Excel file again and all the sheets that interact with the Power Pivot data work fine.
But if I go and open Power Pivot I get the following error: Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added.
This is what I get from the Call Stack
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(DataModelingColumn column, SynonymCollection synonyms)
at Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
at Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
at Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
at Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
I would assume that the issue is with the synonyms and for some reason, when I disabled the loading of my data into the Power Pivot Model, it did not remove the associations to the actual table and synonyms.
If I renamed the table in Power Pivot it all works fine. So that was my work around. Fortunately I did have a copy of the Excel workbook before I made this change. So I could then go and add back in all the relevant data to my table.
Has anyone had this before and know how to fix it?
http://www.bidn.com/blogs/guavaqHi there
I can share the work book, if possible to send me an email address. As the workbook size is about 9Mb.
Thanks
Gilbert
http://www.bidn.com/blogs/guavaq -
My i-phone cannot connect to my wi fi-all of a suddon. My wife's i-phone 4 is connected to the wi-fi network.
I just tried to connect my daughter's i-phone 5, and could not connect message came up "unable to join the network "Sunday".
My I-pad is connected to Sunday also.
I tried the reset routine, and when I try to get on line, it asks for my password. I put it in and it stll says unable to hoin message.
Can someone help?Reset your network settings. Settings>General>Reset>Reset Network Settings
-
Just installed iOS 7.0.4 on the ipad, and can no longer connect to my home locked wifi. I choose the home wifi network and the message comes back with Unable to join the network "............" Dismiss. There is no prompt for the password for the locked network. . . . Any suggestions . . . . .
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
New iPod Unable to join the network after inputting password
Got my iPod this am..
looked too good to touch no pun intended.
I went through the instructions, interrupted with an offer to update_, which I did.
I then saw that the iPod was off line and went to set up the connection.
I do have a Time Capsule but I just use it as an external drive, I use Ethernet connections between it my Netopia router/modem which provides my Wi Fi for another computer.
I have a WPA-PSK security on the Netopia.
My Wi Fi shows up on available networks, I am asked for my password but then I get a message "Unable to join the network"
I must admit that my password is long (and a bit racy) my fingers a bit big, but I know that I have got it right on at least a few occasions.
I have tried entering the details on "Other network" with the same result.
Could my WPA-PSK be a problem?
I would be most grateful for any suggestions.
Various forms of this problem have appeared on this forum, but I think mine is a bit different.
Thank you.Thank you.
Went through that pretty well.
Finally solved it in 2 steps.
1. reset my modem/router to factory settings.
Odd situation, wireless settings, but dependent on ethernet connection.
2. read a post from Hong Kong re strange network settings.
On his advice, into network, changed location from Automatic to one of my choosing.
Bingo! everything came good.
Totally wireless connection. iPod jumped to it. Isn't it great when everything comes together?
I still wonder why it didn't take the signal from the WiFi part of my Modem/Router?
Probably just as well as it sorted my Time Capsule connections out, probably for the first time since I bought one back in early 2008, and its recent replacement when it joined the epidemic of sudden death recently.
Cheers -
Getting an "unable to Load the tables in the power pivot window" error
Hello,
I have 2 worksheets in a excel file and would like to load both into a power pivot table. When I click the 'create linked table' in the pwer pivot ribbon, The powerpivot window open and looks like its about to load the data but then I get
a popup dialogue box with the following error:
Unable to load the tables in the powerpivot window
============================
Error Message:
============================
The given key was not present in the dictionary.
============================
Call Stack:
============================
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at Microsoft.AnalysisServices.Modeler.SheetTabs.PopulateSheetList(String selKey)
at Microsoft.AnalysisServices.Modeler.SheetTabs.SetSelectedSheet(String key)
at Microsoft.AnalysisServices.Modeler.ClientWindow.RefreshClientWindow(String tableName)
============================
When I try again, there is a meesage saying the table is already linked but I dont see any data.
has Anyone seen this error before and know what to do?
Thanks,
NathanHi
I get first the same error as above but after I look into the details I see the following error message:
in translation the error message is: There is already a item with the same key added.
I can open the power pivot window in diagram view. And after I refresh the data in one of the tables I can open it in the table view. I have already searched for "!" signs in the calculations and searched for calculations with same name but that
is not the problem.
Also I can't open the synonym window. I think this has something to do with it because I've made changes in the synonyms.
============================
Foutbericht:
============================
Er is al een item met dezelfde sleutel toegevoegd.
============================
Aanroepstack:
============================
bij System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
bij Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(Tuple`2 measure, SynonymCollection synonyms)
bij Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
bij Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
bij Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
bij Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
============================
Thanks,
Leo -
I just returned from Europe and my ipad will not join my home WiFi network. It keeps giving me the message "Unable to join the network" Any ideas?
I turned off my airplane mode."That was Easy!" Thanks!
-
I bought a used i-pod touch 4 gen that I'm trying to set up. It isn't lettting me join my home wi-fi network. So I turn it on and I pick language, then country , then my wi-fi network. When I put in my password is says - unable to join the network. I have 4 other Apple products that I have that are working fine. Please help
Badunit you said "Continue setting up without the network. You can skip past it, right?"
It sounds like he is setting up the iPod via wif. You can't continue. What yo can do is reset the iPod
- Reset the iOS device.
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then start the setup over again but this time connect the iPod to a computer and set up via iTunes. Then he can troubleshoot the connection proboem. -
When I try to connect to the wi-fi net work at my work place on my new iPad 3 I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home. I have already tried the following:
turn wi-fi off and on again
did a hard restart of my iPad
reset network connections back to factory settings
verified wi-fi is working as my computer accesses internet without issue.
verified that my software is up to date.
Does anyone have more suggestions?Couple of suggestions.
First, many companies have a gateway on their networks that block non approved devices. I work in such a place. You might check with an IT guy , and see if they have a block in place.
Second, the message you are getting means that you have not negotiated the security settings. So either the password is wrong ( case sensitive), or, in some cases, they want a network key as opposed to your normal password.
Again, if you can find one, talk to an IT guy and see if he has some suggestions. -
Unable to extend the table space
Hi Experts
When i am extending the table space i am getting this error
BR1059E Not enough free space in /oracle/SHD/sapdata3/sr3700_20 for maximum size
of file /oracle/SHD/sapdata3/sr3700_20/sr3700.data20, missing at least 491.556
MB
but when i checked the space, space is available
/dev/vg01/lvol16 41943040 34863437 6637129 84% /oracle/SHD/sapdata4
/dev/vg01/lvol15 41943040 37013805 4621160 89% /oracle/SHD/sapdata3
/dev/vg01/lvol14 41943040 31803117 9506180 77% /oracle/SHD/sapdata2
/dev/vg01/lvol13 31457280 28486427 2785176 91% /oracle/SHD/sapdata1
i am unable to extend the table space. Please help me
Thanks & Regards
VenkatHi Venkat,
Please try to disable the autoextend, in the brspace screen first you make off for autoextend then you try to extend the space.
Definetly it will work. I have faced same problem earlier.
Please let me know still if you have any problem for extending.
Thanks
Kishore -
Hi,
My doubt is can I join the table with view in the below where clause condition in the query. If yes, the below query will take 4 hrs to execute it. Can I do the below query to write as simplest?
SELECT *
FROM uabpymt p, uavlsum l
WHERE uabpymt_appl_ind = 'N'
AND uabpymt_amount > 5
AND l.uavlsum_balance < 0
AND l.uavlsum_cust_code = p.uabpymt_cust_code
AND l.uavlsum_prem_code = p.uabpymt_prem_codeuavlsum ---view
uabpymt ---table
The view script below:
CREATE OR REPLACE VIEW UAVLSUM
(UAVLSUM_CUST_CODE, UAVLSUM_PREM_CODE, UAVLSUM_AMOUNT, UAVLSUM_BALANCE)
AS
SELECT cust_code,
prem_code,
SUM(amount),
SUM(balance)
FROM (
SELECT uabopen_cust_code cust_code,
uabopen_prem_code prem_code,
uabopen_billed_chg amount,
uabopen_balance balance
FROM uimsmgr.uabopen
UNION ALL
SELECT uabpymt_cust_code,
uabpymt_prem_code,
uabpymt_amount * -1,
uabpymt_balance * -1
FROM uimsmgr.uabpymt
UNION ALL
SELECT uabadje_cust_code,
uabadje_prem_code,
uabadje_balance,
to_number(0)
FROM uimsmgr.uabadje
WHERE uabadje_balance <> 0)
GROUP BY cust_code,
prem_codeFind the below explain plan output which we get from the execute the query
STATEMENT_ID TIMESTAMP REMARKS OPERATION OPTIONS OBJECT_NODE OBJECT_OWNER OBJECT_NAME OBJECT_INSTANCE OBJECT_TYPE OPTIMIZER
16/01/2009 05:57:24 SELECT STATEMENT RULE
16/01/2009 05:57:24 FILTER
16/01/2009 05:57:24 SORT GROUP BY
16/01/2009 05:57:24 TABLE ACCESS BY INDEX ROWID UIMSMGR UABPYMT 1
16/01/2009 05:57:24 NESTED LOOPS
16/01/2009 05:57:24 VIEW UIMSMGR 3
16/01/2009 05:57:24 UNION-ALL
16/01/2009 05:57:24 TABLE ACCESS FULL UIMSMGR UABOPEN 4
16/01/2009 05:57:24 TABLE ACCESS FULL UIMSMGR UABPYMT 5
16/01/2009 05:57:24 TABLE ACCESS FULL UIMSMGR UABADJE 6
16/01/2009 05:57:24 INDEX RANGE SCAN UIMSMGR UABPYMT_CUST_PREM_INDEX NON-UNIQUE
Index column:
Table name :UABPYMT
Column Name
UABPYMT_APPL_IND
UABPYMT_APPROVED_IND
UABPYMT_PYMT_DATE
UABPYMT_SOURCE
UABPYMT_ORIGIN
UABPYMT_CUST_CODE
UABPYMT_PREM_CODE
UABPYMT_PYMT_DATE
UABPYMT_AR_TRANS
UABPYMT_GL_IND
UABPYMT_GL_POST_DATE
UABPYMT_AR_TRANS -
The order of joining the tables in a query ANSI92
Hi all!
I have three table in Univerce.
I need that those tables joined in next order:
tab1 inner join tab2 right join tab3
When creating a report in WebI they are connected as (regardless of the order of dimentions):
tab1 right join tab3 inner join tab2
How to set the correct order of joining the tables?
OR
how to change RIGHT OUTER JOIN on LEFT OUTER JOIN ?
P.S. I use BO XI3.1, which not have parameter OUTERJOINS_GENERATION
Thanks!it depends on your source system
for example if you are using oracle, you can edit the link between the table and add this
(+)
for example
TAB1.ID = TAB2.ID (+)
AND TAB1.DEPT = TAB2.DEPT(+)
See the following link for discussing outer and inner joins for oracle
http://www.dba-oracle.com/t_outer_joins.htm
good luck
Amr -
hai guys,
can any body explain the table joining procedure step by step process.what is the necessay to join the tables
Regards
kiranHi,
Steps
1. Enter t.code : SQVI
2. Enter the name : TEST press the create button.
3.Enter the title & Comments
4.Select table to join
5.Select the second icon (INSERT TABLE)
6 enter table name : EKKO
7.again insert table
8.enter table name : EKPO
Note the table you are joining should have COMMON field
9. press green arrow button
10. Select the output parameters in table 1 -EKKO
11 Select the output parameters in table 2 -EKPO
12. select the layout
13 SAVE
G.Ganesh Kumar
Maybe you are looking for
-
IndexOutOfBoundsException with BPEL FTP adapter
I am running SOA Suite 10.1.3.4 on WebLogic Server 9.2, and have deployed a simple test BPEL process that is using the FTP adapter to poll for files on a remote SFTP server, retrieve the opaque payload, then copy it to a destination file on another S
-
6504E Aggregation Switch (VS-C6504E-S720-10G)
Hi, I am in the process of understanding the 6504E in terms of technically feasible option as a Provider Class Aggregation Switch. (specifically looking at VS-C6504E-S720-10G, which is bundled option) This 6504E switch will aggregate our Provider Edg
-
Why haven't I recieved the ios 8 update?
Why haven't I received the ios 8 update? I have the blue Iphone 5c for T-mobile
-
Cs3 design premium install problem.
hi. i tried to install cs3 design premium and i didn't know where i put this and i made a mistake. i don't know what i did exactly so anyhow it choose the application with blue tooth. now anytime when i try to install cs3 design premium, it opens blu
-
ACROBAT 8 - CREATIVE SUITE 3 WEB PREMIUM 64Bit Problem AdobePDF.dll_64
Hallo, kann mir jemand einen Tip geben wie ich das CS3 Web Premium Paket unter einem 64-Bit System zum laufen kriege. (Also das Paket funktioniert bis auf ACROBAT 8 > da wir die DLL: AdobePDF.dll_64 angefordert > habe ich aus dem CAB1 extrahiert und