Unable to launch any of Oracle apps!

I installed Oracle 8.1.7 on Red Hat Linux 7.2.
But I can't launch neither oemapp dbastudio nor dbassist.
But before install I've replaced Oracle jre in oracle.swd.jre
with BlackDown jre 1.1.8 because of some problems.
Help me please with this problem. Thank You.
"From Russia with love" 007

Hi
Please post this question in [The specified item was not found.|Portal Implementation] section.
Any how it seems to be the issue with the JAVA version compatibility. You must had installed new components which were build on higher version of java where as your JRE (java run time environment) is at lower version.
Thanks
Chinna

Similar Messages

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or password. If I delete my apps and start over, I may lose the apps that I purchased...

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....

Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well.

HT4972 I am unable to open any of the apps I download including facebook , books on my iphone 3g with ios 4.2.1

I am unable to open any of the apps already purchased
Also cannot open any after a new purchase, even though the same work perfectly on my older ipod touch with version 3.0
Unable even to update software.

Thanks, had already tried it.
Tried it once again , but does'nt work.
Had taken out old ipod touch version 3.0, just to check. Now find that yahoo mail not working at all on it even though gmail works fine.
Seems I am facing some unique problems. .
can you suggest something else which might solve it.

Why am u unable to open any of my apps or send or receive text messages?

Why am I unable to open any of my apps or text or receive messages??it won't even let me delete anything

Go into settings/general/restrictions and see if there is anything that shouldn't be set

TS1702 I have purchased and installed Facebook, pages and numbers apps. However I am now unable to open any of these apps. When I click on the app the GUI just bleeps. Any suggestions please?

I have purchased and installed Facebook, pages and numbers apps. However I am now unable to open any of these apps. When I click on the app the GUI just bleeps. Any suggestions to resolve this please?

Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Or....
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Or....
Try downloading another app - any free app is fine. See if that resets the other apps.

Can't launch any "non-Apple" apps after upgrade

After I upgraded my Iphone 4 to iOS 5 - I can't launch any non-Apple apps. They start to launch and then instantly die. Launching any of the default apps works fine though. Has anyone figured out a fix? This is horrible.

So WEIRDEST thing!!! I deleted/reinstalled facebook, and then tried an app that hadn't worked 20 minutes ago...... ALL my apps are working now! ***? well, sorta - my music is still missing...

CC desktop app crashes on sign in. Unable to launch any CC applications .

I'm having a problem with the Creative Cloud desktop app. It keeps crashing when I enter my Adobe ID to sign in. If I try to launch any of the CC applications, the Adobe Application Manager opens with a "Sign In Required" message. When I attempt the sign in from AAM, that crashes as well. I am unable to use any Adobe products on my laptop right now. This all happened after running a string of updates.
Here is some system info:
MacBook Pro 2011
2.2 i7, 16GB, 512GB SSD
OS X 10.8.4
And a few things that I have tried:
Uninstalled and reinstalled Creative Cloud Desktop.
Changed Adobe ID password.
Trashed CC Desktop preferences.
Trashed all other Adobe preferences.
Rebooted.
One thing that did get it working was creating a new user account and signing in under the new account. But when I log back in to my personal user account It requires another Adobe ID sign in and nothing works.
Any ideas?
Thanks

Hi Paul Zadie,
Please rename OOBE to OOBE.old
Location
Macintosh HD--->Computer--->library--->Application Support--->Adobe--->OOBE
After renaming it you can login to www.creative.adobe.com and from the tab 'download center' download and install 'Adobe creative cloud'
Thanks
Kapil

Unable to use flexfield lexical oracle.apps.fnd.flex.kff.segments_metadata

EBS 11.5.10.2
XMLP 5.6.3
ARXAGMW.rdf
Hello,
I am trying to convert an Oracle Report to XML Publisher, and I am having problems getting lexicals in the Data Template to work.
I raised an SR for this since both related threads in this forum from two years ago were unresolved. Oracle had no answers for me, and told me to ask the question here.
So anyone who has any ideas, please chime in!
Here is a simplified version of the data template, narrowed down to just the use of the lexicals:
<?xml version="1.0" encoding="utf-8"?>
<dataTemplate name="XXWLC_ARXAGMW"
              description="samples from doco"
              defaultPackage=""
              dataSourceRef="ORA_EBS"
              version="1.0">
<properties>
    <property name="xml_tag_case"       value="upper" />
    <property name="include_parameters" value="true" />
    <property name="debug_mode"         value="on"    />
</properties>
<parameters>
    <parameter name="P_ID_FLEX_NUM" dataType = "number" defaultValue="101" />
</parameters>
<lexicals>
    <lexical type="oracle.apps.fnd.flex.kff.segments_metadata"
             name="FLEX_GL_BALANCING_APROMPT"
             comment="Comment"
             application_short_name="SQLGL"
             id_flex_code="GL#"
             id_flex_num=":P_ID_FLEX_NUM"
             segments="GL_BALANCING"
             show_parent_segments="Y"
             metadata_type="ABOVE_PROMPT"/>
    <lexical type="oracle.apps.fnd.flex.kff.segments_metadata"
             name="FLEX_GL_ACCOUNT_LPROMPT"
             comment="Comment"
             application_short_name="SQLGL"
             id_flex_code="GL#"
             id_flex_num=":P_ID_FLEX_NUM"
             segments="GL_ACCOUNT"
             show_parent_segments="Y"
             metadata_type="LEFT_PROMPT"/>
    <lexical type="oracle.apps.fnd.flex.kff.segments_metadata"
             name="ACCT_BAL_LPROMPT"
             application_short_name="SQLGL"
             id_flex_code="GL#"
             id_flex_num=":P_ID_FLEX_NUM"
             segments="GL_BALANCING"
             show_parent_segments="Y"
             metadata_type="LEFT_PROMPT" />
</lexicals>
<dataQuery>
    <sqlStatement name="Q_DOCO_SAMPLE">
      <![CDATA[
        SELECT
           &FLEX_GL_BALANCING_APROMPT alias_gl_balancing_aprompt
          ,&FLEX_GL_ACCOUNT_LPROMPT   alias_gl_account_lprompt
          ,&ACCT_BAL_LPROMPT          alias_acct_bal_lprompt
        FROM dual
      ]]>
    </sqlStatement>
</dataQuery>
<dataStructure>
    <group name="G_DOCO_SAMPLE" dataType="varchar2" source="Q_DOCO_SAMPLE">
      <element name="sample_gl_balancing_aprompt" dataType="varchar2" value="alias_gl_balancing_aprompt" />
      <element name="sample_gl_account_lprompt"   dataType="varchar2" value="alias_gl_account_lprompt"   />
      <element name="sample_acct_bal_lprompt"     dataType="varchar2" value="alias_acct_bal_lprompt"     />
    </group>
</dataStructure>
</dataTemplate>The lexicals "compile" and run successfully, but they return String values that SHOULD be wrapped with quotes; but this doesn't happen, so the SQL that runs is:
SELECT
   COMPANY alias_gl_balancing_aprompt
,ACCT alias_gl_account_lprompt
,CO          alias_acct_bal_lprompt
FROM dualThus, the concurrent program ends with ERROR, due to java.sql.SQLException: ORA-00904: "CO": invalid identifier
The first two lexicals and their corresponding sql statement are samples directly from the user guide (which is full of errors). The third lexical is the one from ARXAGMW.rdf.xml that I am trying to make work.
Edited by: user650442 on Apr 30, 2010 3:58 PM

By the way, simply adding the quotes around the lexical names in the sql statement doesn't work. That causes the lexical references to be ignored as simple string values:
SELECT
   '&FLEX_GL_BALANCING_APROMPT' alias_gl_balancing_aprompt
,'&FLEX_GL_ACCOUNT_LPROMPT'   alias_gl_account_lprompt
,'&ACCT_BAL_LPROMPT'          alias_acct_bal_lprompt
FROM dualI turned on statement-level debugging via xdodebug.cfg and saw how it compiled the lexicals. By replicating the call to apps.fnd_flex_xml_publisher_apis.kff_segments_metadata that I found there, I was able to hack together a workaround for this issue.
Please point me to a better way of doing this if possible, as I had to GRANT EXECUTE on this apps package to my custom code schema. Is there a better lexical/flexfields reference than the XML Publisher documentation?
Here is the call I made in my before-report trigger:
--set ACCT_BAL_LPROMPT flexfield segment metadata lexical
begin
apps.fnd_flex_xml_publisher_apis.kff_segments_metadata(
'FLEX_ACCT_BAL_LPROMPT',
'SQLGL',
'GL#',
101,
'GL_BALANCING',
'Y',
'LEFT_PROMPT',
c_FLEX_ACCT_BAL_LPROMPT
end;

After Lion upgrade, unable to start any 3rd-party apps. Suspect it has something to do with the cache and permissions.

Dear Apple Support Community,
I am using a MacBook 15" (mid-2010) with Intel i7 2.66GHz.
Currently, I write to you via my sister's laptop as mine is unable to start-up Safari or any other web browser at the moment.
After a relatively smooth OS installation of OS X Lion, I noticed that my usual apps, Evernote, Twitter, Skype, and others, were not able to start-up at all (i.e. kept bouncing in place on the dock for what seemed like forever). I have since disabled their 'Open at Login' command and now start my MacBook up with no apps running. After restarting my computer countless times, I've realised that only selected native applications are able to open. Finder, Safari, App Store, iTunes, FaceTIme and most of the Utilities. Even on Finder, right-clicking is apparent blasphemy as the window freezes and the windmill pops up, and I am forced to relaunch Finder. Safari is only able to load simple web pages such as Google.
I have attached an excerpt of my Console for you guys (I could take a screenshot but dropbox could not even open to allow me to send it to my sister's laptop). As you can see, at every refresh, the same 5 messages appear, that a particular 'com.apple.launchd.peruser.501' keeps crashing. Correct me if I'm mistaken but this is probably the process handle for Launchpad. Although I am not sure whether this is the only reason for my computer's sluggishness post-Lion update, I would really like to eliminate this possibility.
Things I have tried:
Repairing Disk Permissions
Unfortunately, this yielded no positive results as it did not seem to rectify the problem. Subsequent reparations have produced the same log, hence I don't think it's working.
Waiting for Indexing to complete
Some people have cited that the reason behind the sluggishness could be due to the fact that Spotlight was indexing my hard drive for optimal search results. I have since waited 7 hours for the indexing to complete, but am still stuck with a computer that cannot even open Twitter.
Installing Onyx
Other forum users have said that it is possible that the computer's cache has been clogged up or something. I am not entirely sure what this means but I went to attempt to download the free product that most people have recommended. Although installation was a cinch, I was not able to even start Onyx. After 10 minutes, Lion just told me that the program had been unresponsive for too long and asked me whether I wished to kill it.
I am almost certain that the overarching problem could be erroneous sharing permissions. But then again, that is no reason for my computer to behave in such a snail-like manner. I would really appreciate if you guys could provide me with some sudo commands to use in the terminal or something that can fix the problems my computer is facing, after understanding the limitations that I currently face considering the state of my MacBook.
The fact that I am writing here on this forum is that I wish to do anything other than a full reinstallation of the OS that has caused me so much anxiety (Snow Leopard was just magical compared to this pile of sh*t, pardon my language). I just want to do everything I can before having to resort to such a barbaric act (I have a lot of applications but I don't know whether I am able to restore those using Time Machine as well).
In any case, thank you guys so much for reading all the way to the end. Help of any sort, be it sincere or condescending, will be fully appreciated. Please don't hesitate to ask for more information if I have not already provided it. As I am an average user, I may not be too familiar with jargon. So if getting the information requires complicated procedures, please provide a step-by-step.
Also, tl;dr: Updated from Snow Leopard to Lion, computer became slow and buggy, tried many things, didn't work, need help.
Thanks,
Nathan

Thanks for the quick advice!
Unfortunately, I am still unable to open my core productivity apps, namely Skype and Evernote. Twitter, as well, could not start. But interesting quick fix though, I never knew you could do that.
Here's the error log after the restart:
What else should I try?

Unable to launch form in oracle ebiz 12.1.3 multinode (shared appl_top)

Hi,
I am getting below error while launching form. Oracle ebiz R12.1.3 multi node application configured in shared appl_Top on linux x86-32 bit.
I getting this error only on secondary application node.
load: class oracle/apps/fnd/formsClient/FmsLauncher.classor not found.
java.lang.ClassNotFoundException: oracle.apps.fnd.formsClient.FormsLauncher.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
load: class oracle/apps/fnd/formsClient/FormsLauncher.class not found.
java.lang.ClassNotFoundException: oracle.apps.fnd.formsClient.FormsLauncher.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
load: class oracle/apps/fnd/formsClient/FormsLauncher.class not found.
java.lang.ClassNotFoundException: oracle.apps.fnd.formsClient.FormsLauncher.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Regards,
Raj

Are you using loadbalancing or SSL ? Did this ever work before ? If so, what has changed ? How are you determining you are on the second apps node ? What are the client and browser versions ?
Pl see if these MOS Docs are relevant
FormsLauncher.class Not Found Error When Attempting to Access Forms in Applications (Doc ID 291698.1)
Load: Class Oracle/Apps/Fnd/Formsclient/Formslauncher.Class Not Found. (Doc ID 373736.1)
Formslauncher.Class Not Found When Failing Over Using DNS Round Robin Load Balancing (Doc ID 604040.1)
Can't Launch Forms in E-Business when accessed via VPN: Formslauncher Notinited (Doc ID 471120.1)
HTH
Srini

Unable create Connection pool for Oracle apps Adapter.

Hi All,
We are trying to create a connection pool for Oracle Apps adapter in 11G SOA suite.
However during the process getting the following error:
An error occurred during activation of changes, please see the log for details.
A <jndi-name> is specified for the resource adapter bean in weblogic-ra.xml, however no <resourceadapter-class> element is specified in ra.xml
Can any one help us on this.
Thanks
Parker.

Please refer section "Configuring Connection Information" at below link -
http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10537/T430238T430340.htm#T464886
Regards,
Anuj

Cannot launch any Studio 8 apps on new Mac

I've just migrated from my old Mac Powerbook to a new MacBook
Pro (intel based) and have discovered that I cannot even launch any
of my Macromedia Studio 8 apps. I might see them appear in the dock
for a second after clicking to launch them, but that's it - no
error messages or anything else. I've just downloaded the latest
updater for Dreamweaver to see if that would resolve my problems,
but it does exactly the same thing. I've also just tried to
reinstall Studio 8 from the original disks - ditto.
According to Adobe's info about intel-based Macs these apps
should work, even if slowly. Probably not all that relevant, but
all of my Adobe CS apps seem fine after transferring the activation
over (other than Version Cue, as expected).
I urgently need to resolve this. Any help or points in the
right direction would be very much appreciated.

Hi,
I am having the same problem on my intel mac-mini. I was
wondering if you had got it sorted?
Regards,
Rob

Unable to open any Sharepoint 2013 Apps

Hi all,
I am having an issue whenever I try and open third-party SharePoint 2013 Apps on our on-premises server. I have configured the app domain as per
http://technet.microsoft.com/en-us/library/fp161236(v=office.15).aspx and installed some random third-party apps (eg. "Yammer App for SharePoint", "Corporate News App").
I can go to the Microsoft Store and purchase apps and make them available to sites, however whenever I go to any of these sites "Site Contents" page and click to open any of the Apps it ends up redirecting the user back to the top-level sites homepage.
Initially it was freezing on a blank page, but looking through the logs on the server there was an authentication error with a service account password. Having resolved that issue it now just returns to the homepage of the top-level site.
Looking through the logs it appears that it gets redirected to the appropriate app domain URL, it then gets an Access Denied errors and attempts to redirect to an "Authenticate.aspx" URL in the apps domain. It then seems to fail authenticating
with "Attempted to perform an unauthorized operation" and go back to the top-level site.
A copy of the log file can be found at:
http://insertdisk.com/log.txt
The main sites web application is configured to use claims-based authentication via ADFS, anybody have any ideas?

Hi ,
According to your description, my understanding is that you encountered an authentication error
when you try to open third-part SharePoint 2013 Apps on your on-premises server with ADFS authentication.
Configuring the app domain is
necessary for setting up SharePoint Apps Development environment. If you just install and open third-part SharePoint 2013 Apps, it is not necessary.
Also for your issue, you can have a look
to the blog:
http://blogs.msdn.com/b/spses/archive/2014/01/17/how-to-use-adfs-with-sharepoint-hosted-apps-in-sharepoint-2013.aspx
http://www.wictorwilen.se/sharepoint-2013-with-saml-claims-and-sharepoint-hosted-apps
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

I cannot change the Apple ID on my iPhone for the App Store so I am unable to update any of my apps. It is an old Apple id I had a good few years ago I have no idea why it is still coming up. I have researched this and solutions coming up are not wor

Working. I have tried going on settings and to the apps store section and That has my new Apple id. I cannot sign into the old account as I no longer have access to the email address and for some reason the security questions I don't seem to be getting right so I cannot deauthorise it on iTunes. It's annoying as I cannot update or add any apps at all, when I try the old ID comes up with no option to change it. Any help will be great but I'm not that good with these phones so it will need to be an idiots guide! Ty

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

Unable to start apache in oracle apps r12

hi,
we are unable to start Apache in one of our test instance.
in Error log..
/home/mnt/ebs/PRJ/app/inst/apps/PRJ_rempapp/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd
Error: Failed to open the wallet [Hint: incorrect path, incorrect password, bad wallet, ...] (Server rempapp.powerdesigninc.us:80, wallet file:/home/mnt/ebs/PRJ/app/inst/apps/PRJ_rempapp/certs/Apache)
recent changes: applied patch 19905922:R12.PO.B.
Referred:Oracle HTTP Server does not Start with AutoLogin Wallet (Doc ID 386314.1)
please help..
Thanks
Raghavendra

Hi
Please refer the below links,
Httpserver not starting, help!
HTTP_Server when starting OPMN.
Regards,
krish

Unable to launch any of Oracle apps!

Similar Messages

Maybe you are looking for