Unable to launch Enterprise Manager console(Oracle 9.2.0.4.0)

I am using oracle 9i db (9.2.0.4.0).
when i try to launch oracle enterprise manager console i am not able to do so.
In short
After putting username, password,service,connect as ...
and clicking on OK button.
nothing happens.No message,no warning.
but i am able to connect to the same schema in sql*plus.
please suggest wat needs to be done.

I met the same problem, can use plsql to connect db (oracle 10g release2), but in the enterprise manager webpage, when I keyed in the right userid/password, nothing happen, but if I purposely key in wrong userid or password, it will show "invalide userid or password", can anyone help?

Similar Messages

Stopping the Enterprise Manager Console (Oracle 10g on SuSE 9.1)

I'm trying to stop the Enterprise Manager Console by issuing the command:
${ORACLE_HOME}/bin/emctl stop dbconsole
Unfortunately, the command fails to stop the EM Console. Here's the output I get:
TZ set to US/Pacific
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://<hostname>:5505/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
--- Failed to shutdown DBConsole Gracefully ---
failed.
The only way I can stop the EM Console (and related services--i.e., emagent) is to kill its process.
Everything (Listener, DB Instance, EM Console) starts fine. I can stop the Listener and DB Instance without any problems. It's just the EM Console shutdown that doesn't happen cleanly.
Has anyone else encountered the same condition? If so, what was the solution?
Here's my operating environment:
SuSE 9.1 (Kernel 2.6.5-7.108-default)
Oracle 10g
Thanks in advance for any help/insight.

Has anyone else encountered the same condition? If so, what was the solution?Yes. Shutdown/reboot of the system made the error go away.
Sorry, no better clues,
Toni

Unable to load Enterprise Manager in Oracle EPM 11.1.2.3

Gurus,
I am trying to access OEM in Oracle EPM 11.1.2.3 using the URL - http://<servername>:7001/em
however I get the following -
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Can someone please help me with this issue.

Hi,
Make sure that your servers (Admin and SOA_Servers) are Running properly.
and also clear the all your browser history.
Regards,
Kiran

Unable to drop Oracle Enterprise Manager console in Oracle 11g

Hello all,
I am trying to drop the Oracle Enterprise Manager console in Oracle 11g (Windows server 2008 32 bit). I am getting the following error.
D:\Oracle\Ora11G\BIN>emca -deconfig dbcontrol db -repos drop
STARTED EMCA at Jun 16, 2009 9:59:58 PM
EM Configuration Assistant, Version 11.1.0.7.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: NM45
Listener port number: 1529
Password for SYS user:
Password for SYSMAN user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: y
Jun 16, 2009 10:00:20 PM oracle.sysman.emcp.util.EMCALogManager addLogFileIntern
al
WARNING: Adding log file D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log failed. Messages will not be logged in this file.
Jun 16, 2009 10:00:20 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log.
Jun 16, 2009 10:00:21 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Jun 16, 2009 10:00:22 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Can't find file D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties
Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.
Could not complete the configuration. Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.
D:\Oracle\Ora11G\BIN>
Even though the D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties is exists in the disk. Any Idea.
In Oracle 9i " Enterprise manager Configuration Assistant" (Open “Start ---> Programs ----> Oracle - OraHome92 ---> Configuration and Migration
Tools -----> Enterprise manager Configuration Assistant) was present. Is there any replacement of this in Oracle 11g ?
Thanks
With Regards
Hemant

hem_kec wrote:
Hello all,
I am trying to drop the Oracle Enterprise Manager console in Oracle 11g (Windows server 2008 32 bit). I am getting the following error.
D:\Oracle\Ora11G\BIN>emca -deconfig dbcontrol db -repos dropBefore this you shoud do :
ORACLE_HOME/bin/emca -x <sid>
ORACLE_HOME>/sysman/admin/emdrep/bin/RepManager <hostname> <listener_port> <sid> -action drop
Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.did you check this log ?
Even though the D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties is exists in the disk. Any Idea.yes. you could visit metalink and see 278100.1 How To Drop, Create And Recreate DB Control In A 10g Database
In Oracle 9i " Enterprise manager Configuration Assistant" (Open “Start ---> Programs ----> Oracle - OraHome92 ---> Configuration and Migration
Tools -----> Enterprise manager Configuration Assistant) was present. Is there any replacement of this in Oracle 11g ?
Thanksok
With Regards
Hemantbest regards

Cannot login as sysdba in Oracle Enterprise Management Console

Hi,
I have recently installed Oracle 9.2.0.4 in Red Hat Linux 9.
I ran "oemapp console" to launch the Oracle Enterprise Manager Console Standalone. However, everytime I tried to login as:
user: sys
password: <sys password>
connect as: sysdba
I always get ORA-01031: insufficient privileges.
The Oracle database where I cannot connect as sysdba in OEM was created MANUALLY.
However, I can successfully login to OEM as sysdba if the database was created using Database Configuration Assistant...
So I might have missed out some configurations when I creasted the database MANUALLY...
any ideas??
Thanks in Advance
Regards
Prasanna

Hi there once more,
Of course it is possible that user system has the same problems as user sys (insufficient privs)....
In that case try to log on as internal/pwd@dbname as sysdba to perform the trick.
Good luck!
Regards,
Georges.

Oracle 11g client - Enterprise Manager Console?

Hello, we use 10g Enterprise Manager Console on our windows desktops as a gui tool. We installed the administrator version of 11g client, but I cannot find the Enterprise Manager Console. Does anyone know where this is?
Thanks!

This is what I understand from doc:
OEM Grid Control does not require an additional license if the follow this rule (from
http://download.oracle.com/docs/cd/E11882_01/license.112/e10594/editions.htm#CJAHFHBJ)
>
A separate Oracle Database can be installed and used as a Oracle Enterprise Manager Grid Control (OEM Grid Control) repository without additional license requirements, provided that all the targets (databases, applications, and so forth) managed in this repository are correctly licensed. This database may also be used for the RMAN repository. It may not be used or deployed for other uses.
>
and if you don't use any management packs http://download.oracle.com/docs/cd/E11882_01/license.112/e10594/options.htm#CIHGFIAF
If you really want to be sure you need to confirm this with your sales representative.
Edited by: P. Forstmann on 2 sept. 2010 17:58
Edited by: P. Forstmann on 2 sept. 2010 18:03

Oracle 8i: Oracle enterprise manager console

Dear all,
I installed oracle 8i (8.1.6) server on linux and client on my own NT
machine. I had no problem to access the database using sqlplus and DBA
studio. I also configured oracle management server and tried to using
Oracle Enterprise Manager Console. Also, there was no problem to discover
the node and to ping agent. But, when I tried to connect to the database,
it gave me the following error message: "ORA-12545: connect failed because
target host or object does not exit". Can someone help me out?
Thanks.
Dewei

add or drop users, Using GUI tools could be sometime dangerous.
You can always use performance diagnostic (oracle provided) to have performance stats in graphical display.
You can also use EM Grid Control (10g) in order to maintain 8i and 9i with 10g EM Grid control.
You need to install an agent on those database in order to communicate with 8i and 9i.
Jaffar

Oracle Enterprise Manager Console redirection

I've recently moved one of our servers that has Oracle 10g 10.2.0.2.0 installed to another domain. After this was done, the Database Control to navigate to the web page will no longer work properly. I have tried uninstalling and reinstalling Enterprise Manager Console, and changing the default web address in the browser's title bar, but to no avail. Are there certain configuration parameters that need to be addressed in order to get this working again, or certain registry settings that need to be altered? Thanks for any help on this in advance.

Only a general advice is possible. This kind of error occurs,when there are mismatches in your installed Oracle software. In your case 'java.exe' and 'oci.dll' are not suited to each other. You may have to repeat the installation . Keep an eye on error messages.
Werner

Oracle Enterprise Manager Console Login issue

HI Guys,
I have installed Oracle 10g on my Windows 7 64 bit system and have trouble running Oracle Enterprise Manager Console.
When I open Oracle Enterprise Manager Console it prompts me for a Hostname and SID parameters. For which I have given my System name as the parameter and orcl as the SID.
Then I get an error saying that " Failed to parse tnsnames.ora file ServiceAliasException: 11 "
Please Help!!
Thank you!!
Karthik

The dbconsole needs to be configured, assuming your database instance is up and running ...
For startup info see http://download.oracle.com/docs/cd/B19306_01/server.102/b14196/em_manage002.htm#sthref143

Oracle Enterprise Manager Console Sessions

I do apologize if this is posted in the incorrect location. I have Oracle Enterprise Manager Console open and i'm within instances\Sessions. When I first log in there are 9 total active sessions. 1 is mine with program java.exe which is OEMC. I have a website that calls a stored procedure. It will return either a string or nothing depending on if there is a row in the table. That is the only call that is being made. This executes on page load. As soon as I go to this page and it loads I check OEMC again and now I have 5 new INACTIVE sessions with program w3wp.exe. Why is there 5 when i'm only making 1 call to the database?
Here is the c# code i'm using on my master page. The page that is calling the master page only has text there is nothing in the code behind for that page.
OracleParameter pMsg;
OracleConnection conn = new OracleConnection(ConfigurationManager.ConnectionStrings["strDB"].ConnectionString);
OracleCommand command = new OracleCommand("GetMsg", conn);
command.CommandType=CommandType.StoredProcedure;
pMsg = command.Parameters.Add("PMSG", OracleDbType.Varchar2, 4000);
pMsg.Direction = ParameterDirection.Output;
conn.Open();
command.ExecuteNonQuery();
string sMsg = Convert.ToString(pMsg.Value);
if (sMsg.Length > 1)
litMsg.Text = "** " + sMsg + " **";
conn.Close();
conn.Dispose();
command.Dispose();
Thank you for any help

I think I figured out what is going on. I think it's the connection pooling that is creating these 5 connections. When I turned pooling off it created 1 connection when I was on that page and then when I exited the connection was gone as well. My question now is are these 5 connections for the entire site? Meaning that it will server anyone user to my site?
If I have an open connection object later on in my code does it skip this process and just go to the connection pool?
Thanks

Oracle Enterprise Manager Console TNS-04404 / TNS-04414

Oracle Enterprise Manager Console
Version 10.1.0.2.0 Production
Running on Windows XP Professional
=================================================
Failed to parse tnsnames.ora file
oracle.net.config.ServiceAliasException: TNS-04404: no error
caused by: oracle.net.config.ConfigException:TNS-04414: File error
caused by: TNS-04612: Null RHS for "QCCP1.WORLD":
0
=================================================
(NOTE): I understand that this issues is related to TNSNAMES.ORA file. I have another computer, and the OEM Console is working just fine on that computer. So, I copied the TNSNAMES.ORA file from the other computer, but still I am receiving the same issue.
Please let me know if you can help me with this issue. Thanks in advance ...

878649 wrote:
This problem occur when i run version 10.2 of Console Enterprise Manager
This a very funny error but took me a lot tries and errors to solve it !
I'ts related to the syntax of an entry defining an SID in the tnsnames.ora. This an oracle bug for sure
Here is an entry in my tnsnames.ora
Then why does posted example below NOT contain any "SID" entry?
mydb.world =
*(DESCRIPTION =*
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = myoraclehost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = mydb)
At first look this entry is valid. At least SHOULD BE VALID an understood by oracle tnsnames interpreter
After a couple of tries, i finally found that there should be at least one space between the begining of the line where figure out the description keyword (DESCRIPTION
I've corrected the problem by inserting a space before this keyword.
This happen

Oracle 10g Enterprise Manager Console bug?

I think I have come across a bug in the Oracle 10g Enterprise Manager Console. If I go into my database, then into the schema, select your schema from the list, then tables. Now once your in your tables, find one that you know of and know fairly well, right click it, and select the show dependencies. A small window will open with just that table and its tablespace and user. Select user, database name, profile, then default. If you right click on the "default" and select "show dependencies" a blank blinking window will open and stay stuck in an infinite loop until you kill the application window. I think that this is a cumbersome tablespace issue. Any thoughts?

Hi Ugonic
Sorry both are same, it's spelling mistake it's " WCMMISLINK". Acutally, my database is getting updated but this alert log is getting generated in enterprise manager console of 10g.
The sql statement is
CREATE MATERIALIZED VIEW ADASNAP REFRESH FAST START WITH SYSDATE NEXT SYSDATE+1 AS
SELECT * FROM ADA@WCMMISLINK;
CREATE MATERIALIZED VIEW BGTABSNAP REFRESH FAST START WITH SYSDATE NEXT SYSDATE+1 AS
SELECT * FROM BGTAB@WCMMISLINK;
The above query is sheduled to run every day .
and i get the following Alert log in 10g enterprise manager console
Generic Alert log ORA-12012: error on auto execute of job 54
ORA-04052: error occured when looking up remote object WCMM.SYS@WCMMSERVERLINK
ORA-00604: error occured at recursive SQL level 3
ORA-12514: tns no listener
ORA-06512: AT "SYS.DBMS_SNAPSHOT" line 1883
can you guid me why the above error are occuring
Regards
Niranjan

Oracle 10g Enterprise Manager console giving Alert log

Dear all
I have One HP server running Oracle 10g on Redhat Enterprise Linux 3.0 and two other systems with Oracle 9i and 8i. I have written sql query in my Oracle10g system which updates the database in 9i.
The sql statement is
CREATE MATERIALIZED VIEW ADASNAP REFRESH FAST START WITH SYSDATE NEXT SYSDATE+1 AS
SELECT * FROM ADA@WCMMISLINK;
CREATE MATERIALIZED VIEW BGTABSNAP REFRESH FAST START WITH SYSDATE NEXT SYSDATE+1 AS
SELECT * FROM BGTAB@WCMMISLIN;
The above query is sheduled to run every day .
and i get the following Alert log in 10g enterprise manager console
Generic Alert log ORA-12012: error on auto execute of job 54
ORA-04052: error occured when looking up remote object WCMM.SYS@WCMMSERVERLINK
ORA-00604: error occured at recursive SQL level 3
ORA-12514: tns no listener
ORA-06512: AT "SYS.DBMS_SNAPSHOT" line 1883
can you guid me why the above error are occuring
the ORA-12514: tns no listener
the above error why it is occuring , then listener is running on oracle 10g server and other 8i and 9i server also and i am able to connect from oracle10g to other oracle 8i and 9i from sql plus and viceversa..
what could be the problem with tns listener
Regards
Niranjan

Hi Ugonic
Sorry both are same, it's spelling mistake it's " WCMMISLINK". Acutally, my database is getting updated but this alert log is getting generated in enterprise manager console of 10g.
The sql statement is
CREATE MATERIALIZED VIEW ADASNAP REFRESH FAST START WITH SYSDATE NEXT SYSDATE+1 AS
SELECT * FROM ADA@WCMMISLINK;
CREATE MATERIALIZED VIEW BGTABSNAP REFRESH FAST START WITH SYSDATE NEXT SYSDATE+1 AS
SELECT * FROM BGTAB@WCMMISLINK;
The above query is sheduled to run every day .
and i get the following Alert log in 10g enterprise manager console
Generic Alert log ORA-12012: error on auto execute of job 54
ORA-04052: error occured when looking up remote object WCMM.SYS@WCMMSERVERLINK
ORA-00604: error occured at recursive SQL level 3
ORA-12514: tns no listener
ORA-06512: AT "SYS.DBMS_SNAPSHOT" line 1883
can you guid me why the above error are occuring
Regards
Niranjan

Oracle (R) Enterprise Manager Console Version 9.2.0.1.0 Error?

Hi
I just took over from someone the role of a DBA and I would like to clarify an issue I saw in Oracle (R) Enterprise Manager Console Version 9.2.0.1.0 Production.
My Default Temporary Tablespace, TEMP.DBF is currently sized at 6144 MB, Used size is 6140 MB, 99.93% with full auto extend on.
Automatically extend datafile when full (Auto extend) 20480 K Bytes.
Maximum Size - 8192 K Bytes. (------> Issue to clarify here<------)
I think most probably my ex-staff clicked wrongly and chose "K Bytes". It should be "M Bytes". However, I would like to know how is it possible that OEM console Version 9.2.0.1.0 allows the Maximum Size (8192 K Bytes) to be below 6144 MB? Is this allowed? If so and left uncheck, what will the repercussion be on the TEMP tablespace?
Has anyone ever come across this issue?
Regards
Hahnhahnhahn

See an small example below
"Tablespace Created"
SQL> create temporary tablespace temp_test tempfile 'C:\ORACLE\APP\ORADATA\CKPT\temp_test01.tmp' size 100m autoextend on
next 10m maxsize 200m;
Tablespace created.
SQL>
"check below size, user bytes,maxsize"
TABLESPACE_NAME                FILE_NAME                                                    BYTES/1024/1024 USER_BYTES/1024/1024 MAXBYTES/1024/1024 AUT
TEMP_TEST                      C:\ORACLE\APP\ORADATA\CKPT\TEMP_TEST01.TMP                            "100                      99                200" YES
SQL>
"Now resized to more than maxsize so further maxsize supprssed"
SQL> alter database tempfile 'C:\ORACLE\APP\ORADATA\CKPT\TEMP_TEST01.TMP' resize 250m;
Database altered.
SQL> select tablespace_name,file_name,bytes/1024/1024,user_bytes/1024/1024,maxbytes/1024/1024,autoextensible from dba_temp_files where tablespace_name='TEMP_TEST';
TABLESPACE_NAME                FILE_NAME                                                    BYTES/1024/1024 USER_BYTES/1024/1024 MAXBYTES/1024/1024 AUT
TEMP_TEST                      C:\ORACLE\APP\ORADATA\CKPT\TEMP_TEST01.TMP                            "250                     249                200 YES"
SQL>
Now Bytes is more than Maxsize , its common behaviour of oracle database. When you resize tempfile, you have to again mention what is the maxsize.

Configure Enterprise Manager Console in Oracle 10.2.0.4

Hi.. Friends,
We recently upgraded our SAP 4.7 to ECC 6 with Oracle 10.2.0.4 DB.. In Oracle 9 we have an option Enterprise manager console But in our new Oracle 10.2.0.4 there is no option like that. How can i configure Enterprise Manager console in this.
Our Operation System is Windows Server 2008.
Regards
Mahendran

Hi Mahendra,
OEM not supported in standard SAP See note Note 105047 - Support for Oracle functions in the SAP environment.
You can configure OEM but first check your license scope - Note 740897 - Info about the Oracle license scope; Required Oracle options
After fullfill read below note
Note 355770 - Oracle Enterprise Manager Database Control
Note 386413 - Oracle Enterprise Manager (OEM) in the SAP environment
SurendraJain

Unable to launch Enterprise Manager console(Oracle 9.2.0.4.0)

Similar Messages

Maybe you are looking for