Unable to launch iTunes recently after my windows vista update

When I launch iTunes, the error prompted. "iTunes has stopped working" - A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available - "Close program" button. Then the following error prompted;
What is the Data Execution Prevention (DEP)?
Data Execution Prevention..................................................................... ................................................................................ ..............................................................
Is anyone know how to fix it??

What is the Data Execution Prevention (DEP)?
Can you check something further for me please, joseph? Is your QuickTime Player also currently failing to launch?

Similar Messages

BSOD after installing Windows Vista Update Package

Ok, so I am not good with computers, so I have no idea what to do. I have looked everywhere and still cannot find a solution that seems plausible with my error.
The other day I was on my computer and it was running perfectly fine. No freezing, no slowness, perfect. Then, my update thing told me that the most recent Vindows Service pack was available for update, and I like to keep up-to-date with them, so I installed and it was set to automatically update.
I have an IBM ThinkPad t61p with Windows Vista Ultimate.
After restarting the computer I left for a while and came back to the checkdisk running. I had not told it to run, and it had frozen at 74% on step 5/5 of the checkdisk, which I am assuming means that I have some sort of hard drive corruption. So, I was forced to turn off with holding the power button and when it turned on again it went straight to the diskcheck and I watched it until it froze at the same point again. The next time I restarted I got the blue screen of death and now that is all I get whether I start in safe mode, or any other mode.
I had a virus or something a while ago that kept freezing my computer, but I think I got rid of it as it has been working fine over the past 5/6 weeks. I also don't think it is a problem with not having enough RAM because I just uninstalled a couple programs that were taking up a lot of space, and even before that it wasn't close to full.
I get stop: 0x00000024 error and it goes into a restart loop
When I press the blue ThinkVantage button and go to the F11 menu it tries to open rescue and recovery, but after about 2 minutes it goes back to the infinite restart loop.
I also tried running the hard drive diagnostics program and IDK how to interpret the results, but it says:
Main Hard Disk Drive.......HDD0: HITACHI (gives me the id code)
Status......Test in progress 100%
Result......Pass: Controller Diag, Pass: Read verification and speed test
I have no idea what is wrong and it is so frustrating!!!!!!! What should I do if I can even do anything?! I need help!!!! T_T
(As a last resort I also tried installing XP on my Vista machine. I didn't think it would work, but I put boot CD in the first spot, and put cd in, but it just goes to the BSOD again.)

this error is so much obvius.
just look on internet on how to disable readyboost. additional just turn off the hybrid function and u will never see this bsod again, even i dont know how dumb ur mediacenter edition is and want to give u other bsods. btw i only seen bsods couse of **bleep** driver on my devices. donno how u manage to get such bluescreens......
btw according to the results i recommning ya to use ckhdsk /f to ur disk. mstWorker is mentioned wich means read write issues on access files. mstworker is microsoft Tiworker, an process wich examines files an bit. used by winupdate and the indexer.

Unable to install itunes 10.1 to Windows vista

Hai everyone.
Ive been having a really hard time trying to install itunes 10.1
To do so,I uninstalled itunes 10 and tried installing itunes 10.1.While it is in the process of installing,an alert pops up and says "Could not access %Appdata%/" and after i hit cancel another alert pops up saying "Could not access network location %appdata%" and then another alert pops up saying quicktime was not installed.
I have followed every support to try to solve this problem and it still wont install.
I have uninstalled and installed many of times.
I updated my windows to the latest package.
I downloaded the itunes 10.1 32bit because that is the specific system type for my computer.
I downloaded itunes 9,but dosent read my library because it was created with a newer version of itunes.
I have deleted the temp folder many many times.
I have tried installing in administrator mode and same problem.
My friend that is really good with computers looked into my computer and found nothing wrong with and files.
What should I do?
Please help.

Did you try the fixit from the following Microsoft document, vanessa?
[You receive an "Error 1606" error message when you try to install or remove a Microsoft program|http://support.microsoft.com/kb/886549]

T61 no sound after Windows (Vista) update (?)

I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all. I cannot hear files locally or on the Net -- or any of the computer sounds.
i realize now that it has happened after a Windows (Vista) update. I have done every step but 6.
I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable).
http://support.microsoft.com/kb/948481
>> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
Message Edited by Suntea on 06-27-2008 12:50 PM

I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all. I cannot hear files locally or on the Net -- or any of the computer sounds.
i realize now that it has happened after a Windows (Vista) update. I have done every step but 6.
I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable).
http://support.microsoft.com/kb/948481
>> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
Message Edited by Suntea on 06-27-2008 12:50 PM

Unable to download iTunes on my second windows computer (64 bit). I got it fine on my first one. After downloading the program and installing it, I keep getting an error message:Apple Mobile Device Failed to Start. This happens wven when my IPhone 5c is t

I am unable to download iTunes on my second Windows 8 computer (64 bit). I got it fine on my first one and have used it quite a bit. After downloading the program and installing it on the second computer, I keep getting this error message: "Apple Mobile Device Failed to Start." This happens when when my IPhone 5c is connected via Wi-Fi and I have clicked on "Trust This Computer." (I have tried to install several times-- It gets hung up when it reaches"Starting Services.")

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Unable to Launch iTunes - Windows 7

I'm unable to launch iTunes on my PC. I'm running Windows 7. I tried t unistall and reinstall, twice, but it stll will NOT launch. Any suggestions?

Hi b noir...I thought I did "precise text" when I said I'm unable to launch iTunes. There is no error message there is nothing...it just does not launch. However, I figured it out...it's a Quicktime issue. Weird but it was.
Thanks for your reply...you were the only one!

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Unistall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

Problem after updating to iTunes 10.5 on Windows Vista.. I can no longer access the iTunes store..

Hi
After updating to iTunes 10.5 on Windows Vista I have found that I can no longer access the iTunes store... I am left with a blank iTunes screen with the loading bar stuck at halfway..
All other features seem to work... only opening the iTunes store is failing..
I have ran the diagnostics feature and this says everything is ok, so I'm a bit stuck
Please help

Purple-Gecko...all that I can say is, "Boom!!!" You are THE man/woman, whichever the case may be.
The "netsh winsock reset" command worked like a charm for my machine (running Windows XP SP3). I have had two weeks of frustration with this issue and finally found your post which got me back online with the iTunes store. My problem accessing the iTunes store began once I downloaded and installed iTunes 10.5 in preparation to upgrade to OS5. Once 10.5 was installed, I could open iTunes and access everything except the store (which prevented any of my devices from being able to sync). I followed all of the suggestions that I could find in Apple Support and the suggestions that I was emailed from Apple's support techs. I unistalled all Apple software and reinstalled iTunes multiple times, and still could not access the store.
Your suggestion is the only "cure" that I have found.
I thank you, my iPod thanks you, and my iPhone 4 thanks you for taking the time to post this fix.

TS1277 Unable to launch itunes from my PC. Get an error stating MSVCR80.dll is missing and need to re-install itunes. I've reinstalled numerous times...still not working. What should I do?

I'm currently unable to launch itunes from my PC. I get an error message stating that MSVCR80.dll is missing. It recommends that I re-install itunes and that may correct the issue. I've re-installed numerous times and nothing seems to be working. What should I do?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99968)

I uninstalled itunes, downloaded new version and the setup file won't launch. I'm running Windows Vista 64-bit. Can anyone help?

I uninstalled itunes, downloaded new version and the setup file won't launch. I'm running Windows Vista 64-bit. Can anyone help?

Is there an error message when you try to launch the iTunesSetup.exe (or iTunes64Setup.exe)? If so, what does it say? (Precise text, please.)

Itunes not working with windows vista

Downloaded latest iTunes to laptop running Windows Vista... After install, the program won't launch. You get an error message stating iTunes is shutting down and then get a Windows error message.

and the error messages would be....

Itunes freeze after 10.9.3 update...

itunes freeze after 10.9.3 update...
it seems looking for the store and then freeze...
anyone else? suggestion?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

I am trying to reinstall iTunes on my PC (Windows Vista) and download stalls at the end and message reads "The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library Core Media.dll"

I am trying to reinstall iTunes on my PC (Windows Vista) and the download stops just before completion with the following message: "The procedure entry port kCMByteStreamNotification_AvailabileLengthChanged could not be located in the dynamic link library Core Media.dll" Also "error 127. Any suggestions?

Okay. Trouble at the "publishing production information" stage also suggests trouble with Apple Application Support.
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I downloaded the latest important update to windows vista yesterday, and since then Firefox crashes very soon after enetering the portal of any website I visit, and I want to know if the windows vista update could be doing this?

Yesterday (23rd March) my computer appeared to perform an auto update of windows vista and since then every time time use firefox it crashes shortly after entering a web portal (after about 1-5 seconds). It even crashes on the BBC news page which I always use to check stability. I have been using Firefox for years and it has just started doing this. However, I examined the programme files and actaully cannot see a windows vista update for yesterday, but I can see that there was a Firefox update, so now I'm a bit confused. Looking at the program files in more details it appears that there was a very major update of Firefox taking place including lots of file extensions. You should also know that your password recovery process doesn't work. I never got the email that is supposed to help me recover a lost password. I am really disappointed with Firefox doing this. It's costing me time and money. Can you help before I give up and go back to using Windows explorer (ugh!). I have thought of simply removing Firefox and starting again with a new download but that might not solve the probelm and I will lose my bookmarks.

I have an update to my message posted yesterday regarding Firefox crash after vista update. Today it got worse when Firefox wouldn't open at all and Windows explorer also stopped working. Curiously, email was still working, and when I checked another (little used) account on the same PC, I got a perfect connection with Firefox and Explorer. I had to conclude that the latest updates of Vista have interacted with some application only found in my main account on the PC. I tried opening Firefox in its safe mode and I tried opening explorer without Plug ins, but neither worked. Finally I decided the only answer was to do a system restore and wind back the windows software to where it was before the problem. I now have Firefox and explorer restored to working order, but I still don't understand why, because I got a message saying the system restore hasn't worked. Full Comprehension of the cause is beyond my capability, but through trial and error as described above I seem to have fixed it. The suspect vista updates are KB2505189 , and KB2524375.

I use a macbook pro..My iPhone 4s refuses to be recognised by itunes even after I downloaded to updated itunes...what now?

I use a macbook pro..My iPhone 4s refuses to be recognised by itunes even after I downloaded the updated itunes...what now?

Hi Oneness1,
Thanks for visiting Apple Support Communities.
These troubleshooting steps can help if your iPhone 4S is not recognized by your MacBook Pro:
Plug the device directly into a high-power USB 2.0 port on the computer. If possible, use a USB port on the back of the computer.
Avoid plugging the device into a keyboard, display, or standalone hub. The USB ports on these accessories may be low-power or only offer USB 1.x connections.
If you are using an accessory, remove the accessory and connect the device to the computer using only the Apple 30-pin to USB Cable or Lightning to USB Cable.
If you have access to additional Apple 30-pin to USB Cable or Lightning to USB Cables, try testing with another if the first one doesn't work.
Restart your computer and device. To restart your device:
Hold the power button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
Disconnect all USB devices from your computer, except for your keyboard and mouse. Then reconnect the iOS device. If the issue is resolved, reconnect other USB devices, testing after each connection.
From:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
Install software updates on your Mac.
Note: If an iTunes update is available, apply the update.
Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
Disconnect other USB devices and connect your device directly to a USB port on your Mac.
Restart your Mac.
From:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
All the best,
Jeremy

Unable to launch iTunes recently after my windows vista update

Similar Messages

Maybe you are looking for