Unable to Launch iTunes - Windows 7

I'm unable to launch iTunes on my PC.  I'm running Windows 7.  I tried t unistall and reinstall, twice, but it stll will NOT launch.  Any suggestions?

Hi b noir...I thought I did "precise text" when I said I'm unable to launch iTunes.  There is no error message there is nothing...it just does not launch.  However, I figured it out...it's a Quicktime issue.  Weird but it was.
Thanks for your reply...you were the only one!

Similar Messages

  • TS1277 Unable to launch itunes from my PC. Get an error stating MSVCR80.dll is missing and need to re-install itunes. I've reinstalled numerous times...still not working. What should I do?

    I'm currently unable to launch itunes from my PC. I get an error message stating that MSVCR80.dll is missing. It recommends that I re-install itunes and that may correct the issue. I've re-installed numerous times and nothing seems to be working. What should I do?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99968)

  • Unable to launch itunes 9.02 64bit on Windows 7 64bit

    I just got a new computer running windows 7 home premium.
    Downloaded the latest version of itunes and installed it with no issues.
    after install i left the box checked to "launch itunes" only nothing happened.
    If i try to launch the app from desktop it shows up in my task manager then removes itself 15sec later.
    Same thing happens with quicktime.
    The apple software updater will work.
    I've uninstalled, rebooted, and the issue remains.
    I'm at a bit of a loss here. Any ideas on where to start troubleshooting this issue?
    Thanks,
    md
    Message was edited by: MDubbelboer

    I've read that the best thing to do with pre-installed Windows 7 is to... install a retail version sans bloatware and trialware.
    Newegg sells the System Builder, or try reinstall.
    As for Norton, they have a removal tool on their Community forum and web site, uninstall doesn't always do a good job (if it was NIS/NAV 2010 or N360 v4, those may be Windows 7 compatibile, earlier version are not).

  • Unable to launch iTunes recently after my windows vista update

    When I launch iTunes, the error prompted. "iTunes has stopped working" - A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available - "Close program" button. Then the following error prompted;
    What is the Data Execution Prevention (DEP)?
    Data Execution Prevention..................................................................... ................................................................................ ..............................................................
    Is anyone know how to fix it??

    What is the Data Execution Prevention (DEP)?
    Can you check something further for me please, joseph? Is your QuickTime Player also currently failing to launch?

  • Issues launching iTunes windows 7 64 bit

    Hi people who are hopefully a lot smarter than I am,
    I can't launch iTunes on my computer. I've searched the discussion boards and tried all the fixes I've seen suggested and nothing is working. When I double-click on it it does nothing; if I hold down ctrl-shift to start it in safe mode it does nothing; I've repaired, uninstalled and reinstalled QuickTime several times; I've repaired iTunes a million times as well. It isn't showing up in my task manager at all either. The action center just keeps telling me to download the most recent version to fix the launch issue and like I said that's done nothing. I even connected my iPad via USB and that didn't get it to launch and tried deleting SC Info .sidb and .sidd files. Also, it's not responding to my storm of curse words. I've tried so many things I can't remember them all.
    I'm not sure if this is related, but a couple days ago the action center already showed iTunes had failed to launch several dozen times and then my computer would freeze when it was trying to load Windows and the diagnostics were indicating HD failure. I booted to a CD of SeaTools for DOS that I had from when my HD failed over a year ago and it failed the short test and found a bunch of errors in the long test but it was able to repair them. I can get back into Windows now but my super good friend iTunes is still holding out.
    What I would really like to do is fix it with a hammer, but something tells me then nothing else on my computer will work either so I'm open to any other suggestions. Has anyone else run into this issue and found a fix?

    Someone else? asked the same early this AM.
    I'd guess your registry was at fault to begin with, and that you need to reset all the program and file types back to defaults is all.
    But then look under the hood for why as it is very uncommon and maybe Windows is at fault.
    Consider total uninstall AND use Revo and maybe CCleaner 3.12 as well as clean out %TEMP% folder and run chkdsk

  • TS1717 Unable to launch Itunes

    When I try to launch itunes, I get a blank window with "OK" in but no other message, I can click on the OK, but nothing happens and itunes doesn't launch!  I have tried checking for updates, and I have also shut down and re-started.  To no avail.  Lastly I tried to open itunes in "safe mode" but nothing happened!
    Can anyone help please??
    many thanks in advance :-)

    Hello jammydodger0905
    The best method is to completely remove iTunes and related components and then reinstall iTunes again.
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • TS1470 I have Norton Security but unable to launch iTunes

    I have not been able to launch iTunes from Windows 7.  Not sure if this is due to some sort of security configuration that is on my Norton Security>

    No error message is received.  I would click on iTunes icon to launch and nothing happens.
    Can you check something for me please?
    Restart your PC. after the PC restarts, bring up your Task manager, and go to the "Processes" tab. Click "Image name" to sort the processes alphabetically.
    Now try to launch iTunes.
    Does an itunes.exe process appear? If so, does it vanish after a second or so, or does it persist in the Processes tab (even though iTunes itself never shows up)?

  • Unable to rescale iTunes Window (Mac OS)

    Running iTunes 9.1.1 on a new MacBook Pro after having moved library from my old 15" macbook pro, I now find the iTunes window exceeds the width of my screen. And I do not see the bottom of the window, especially the resizing corner and the buttons for things like syncing are now within the dock.
    Help!

    you can try to option click on the green button in the upper left corner of the window.
    if this don't work, temporarily change screen resolution until you can grab the little resize button.
    JGG

  • Unable to launch iTunes 10.2.1

    I'm having problems when trying to open iTunes 10.2.1 in Windows 7 (64-bit).
    When I try to launch the program it loads for about 2 seconds and then stops. The iTunes.exe *32 process does appear in task manager. I have tried ending the process but nothing happens - it does not disappear from the list.
    I have tried a complete reinstall to no avail. I have also tried disabling the Bonjour service, which hasn't helped.
    I have also tried opening the program in compatibility mode, but this doesn't work either.
    Any help would be greatly appreciated!

    If stopping Bonjour did not work, then another thing it might be is a problem with the configuration file, see this Apple article:
    http://support.apple.com/kb/TS2363?viewlocale=en_US
    There have been some reported of iTunes being very very slow to start. If you wait 15 mins or so, does iTunes eventually open?
    In the end though you are into general troubleshooting:
    http://support.apple.com/kb/TS1717
    It is important to establish iof the problem is system wide or confined to one account.

  • Unable to launch iTunes 10.4

    I am able to install iTunes 10.4 but when I try to launch it, nothing happens. Task Manager shows iTunes.exe for a few seconds then it disappears.
    I've tried reinstalling iTunes multiple times following this guide http://support.apple.com/kb/HT1923.
    iTunes is able to launch when I created a new user but following this guide http://support.apple.com/kb/TS1717 didn't work.
    Running Windows 7 Home Premium 64 bit.
    These are the event logs:
    Faulting application name: iTunes.exe, version: 10.4.0.80, time stamp: 0x4e262cf4
    Faulting module name: iTunes.dll, version: 10.4.0.80, time stamp: 0x4e262cc3
    Exception code: 0xc000041d
    Fault offset: 0x00825941
    Faulting process id: 0xd8c
    Faulting application start time: 0x01cc552487b6404f
    Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
    Faulting module path: C:\Program Files (x86)\iTunes\iTunes.dll
    Report Id: c9ad65de-c117-11e0-84f8-18f46a22af30
    Faulting application name: iTunes.exe, version: 10.4.0.80, time stamp: 0x4e262cf4
    Faulting module name: iTunes.dll, version: 10.4.0.80, time stamp: 0x4e262cc3
    Exception code: 0xc0000005
    Fault offset: 0x00825941
    Faulting process id: 0xd8c
    Faulting application start time: 0x01cc552487b6404f
    Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
    Faulting module path: C:\Program Files (x86)\iTunes\iTunes.dll
    Report Id: c8a2f6d8-c117-11e0-84f8-18f46a22af30
    Thanks for any support.

    Okay everyone I found a solution that worked for me and I hope will work for each of you. For those who have not read my previous post I am running a PC with Windows Vista. I checked the other apple software that I have on my pc and noticed that Quicktime would open but was not working properly. With the link between Quicktime and iTunes, I decided to switch my efforts to Quicktime over iTunes. So, I went into my control panel and uninstalled Quicktime. I then went to apple.com/quicktime/download/ and installed Qicktime 7.7 for windows. I completed the install and was then able to open iTunes. It almost seemed to simple. I hope this helps.

  • TS1717 I am unable to launch iTunes, when I double-click on the icon, a prompt comes up saying, "iTunes is on a locked disk or you do not have write permissons for this folder."  This issue occurred out of the blue!  How do I correct this?

    I don't know what suddenly caused this.  I haven't installed anything weird or obscure, I've kept up with all of the normal updates for Windows, my anti-virus, and other normal software (Adobe, Apple products, Steam).  So all I did today was double-clicked on the iTunes icon, and the prompt that I supplied kept popping up.  I rebooted my computer, I uninstalled and reinstalled iTunes and all of my Apple products (Quicktime, Safari).  But nothing seems to be working.
    I could sure use some much appreciated assistance!!!  Thank you!

    I did what I could out of the information provided, however there was quite a bit of difference between the XP format and Windows 7.  After trying what I could, I was still receiving the same error message.  Besides trying to fix this issue, I'm also trying to figure out how this whole thing started to begin with.

  • I'm unable to launch iTunes.

    The error message asks me to reinstall itunes when I try to launch it. I have reinstalled it many times but I still get the same message. Anyone else have this?

    Having this problem too: IT'S REALLY REALLY ANNOYING!!! Anyone have an idea how to sort this?

  • Unable to download itunes - windows installer package

    I've been trying to update iTunes, half way through it says" There is a problem with this Windows Installer Package. A program required for this install to complete could not be run." I've tried uninstalling then re-installing - now it won't let me do anything.  Not sure what to do, any suggestions would be greatly appreciated.  Thanks in advance.

    There is a problem with this windows installer package.  A program required for the program to complete could not be found.  Contact your support personnel or package vendor.
    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Unable to download Itunes windows 8

    Hi. I'm trying to download Itunes in my new computer (Windows 8 64 bit) but I can't. I already try the option of run as an administration but that does not work. What can I do??? Thanks

    Hi sheilarodz,
    If you are having issues downloading iTunes for your Windows 64 machine, you may be able to download it directly from the following link:
    iTunes 11.0.4 for Windows 64
    http://support.apple.com/kb/DL1615
    Cheers,
    - Brenden

  • Unable to download Itunes, Windows error 127, Itunes error 7

    How do I reinstall iTunes.
    Messages: iTunes.exe-Entry Point not found;   iTunes not installed Correctly. Error 7 (windows error 127). 2nd message

    Hi sheilarodz,
    If you are having issues downloading iTunes for your Windows 64 machine, you may be able to download it directly from the following link:
    iTunes 11.0.4 for Windows 64
    http://support.apple.com/kb/DL1615
    Cheers,
    - Brenden

Maybe you are looking for

  • File not found error on Mandrake 8.0

    My installation stops on 54 % and a popup message appears complaining that some files are not found on Disk2. As I have no alternative I give <Ignore> for the 10 -15 popup windows that appear, and the installations continues. In the link phase the po

  • I have an HP Laserjet M1319f MFP scanning problem

    I have an HP Laserjet M1319f MFPand ever since I moved from Windows XP to window7 it won't give me the option to scan to PDF

  • [SOLVED] Lastfm-Client, Installation fails.

    Hello! A week ago the package lastfm-client moved to the AUR from [community]. Since that I encounter an error trying to install it. The erroroutput doesn't say me anything so I hoped probably someone of you knows how to fix this. /usr/bin/ld: ../bui

  • Requirement date in Md04 to be adjusted

    hello,friends.             i have a component A* with lot size mb(monthly plan),plan on 01.12.2007 . i used GR Processing time 5 days.To bring component in previous month i,e, on 26.11.207.                Now ,my problem is that due to mb lot size &

  • Audio problem going from 5.0 to 4.5

    I have captured a project on one computer with FCP 5 and the audio works fine, when I transfer the files to another computer with FCP 4.5 the audio does not play. Is there a codec problem do you think? The audio plays in quicktime player on the same