Unable to launch lightroom 5
I downloaded Lightroom 5 through creative cloud and am unable to launch the application, error message 0xc000007b is shown stating äpplication unable to start correctly. Any help please?
http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
Similar Messages
-
I am unable to launch Lightroom 5 Catalog.Ircat. A black rectangle says: Lightroom - Opening Catalog: Lightroom 5 Catalog.Ircat, but it never opens.
I have Windows 7 Home premium, Lightroom 5.6 64bit The program was working
properly till a few weeks ago. At that time I was not able to get my
files. There was the little question mark on them. I have three external
drives with pictures in them. H and G drives all have question marks as to
the location of the original pictures. I drive which I share with a laptop
where it work just fine and had been working fine now I can no longer
access Lightroom 5 Catalog on it.
I noticed two or three days ago that when I opened Lightroom it opened
another Catalog Call Lightroom Catalog 2. So when I tried to launch
Lightroom Catalog 5, I get the long rectangular bar with the message
"Lightroom - Opening Catalog: Lightroom Catalog.Ircat". But it never
opens. The message just sits there. There are error messages. The
external drive with Lightroom 5 Catalog.Ircat continues to work fine on my
laptop.
Your help is much appreciated.
David -
Since leopard unable to launch lightroom
Since I installed leopard (now 10.5.1) on my Power PC G4, Adobe Lightroom (latest version) starts to launch but stalls and I am left with a simple menu that allows nothing to be done. No modules showing. I am using latest lightroom and updated my two epson printer drivers. Photoshop elements launches but no luck with lightroom. Any suggestions? I had a similar problem pre leopard with elements and it turned out to be a scanner conflict.
Thanks
DickTo John, Isaac's Dad and DonRicklin,
I can't tell you how much I appreciate the help. After a clean install of 1.3.1 the program came up, asked me if I wanted to start a new catalog and all was well. I am amazed that first of all you could do a clean install on what I thought was an upgrade and that someone could figure that this might be the solution. This makes my Christmas. The other truly amazing thing is that there are nice people out there that are willing to give of their time to help perfect strangers. You guys deserve to be congratulated. Now I can get back to getting my printer to cooperate with leopard and the lightroom and elements.
Thanks again and have a great holiday season.
Dick -
Unable to launch Lightroom due to an error message.
yesterday Lightroom was working fine. Now I get this error message everytime I try to start Lightroom. - Lightroom encountered an error when reading from its preview cache and needs to quit. I tried reinstalling Lightroom to no avail. I cannot use Lightroom. What happened? How do I fix this?
Hallo Kaethe Ko,
The previews folder can grow quite big without any problems.
Mine is ca. 115 GB, for a catalog of 113'000 images and 1.6 GB size of the lrcat-file.
That works pretty fine.
So you might have had a corruption problem. Of course this should not happen. For such catalog-preview-sizes it would be really inconvenient, as recreation by LR would take a week running in the background.
Hopefully your overall catalog size was not that big that the previews-recreation will take so long.
Cornelia -
I had been using Lightroom 5 for the past few months. Now after upgrading to LR 5.5 the application is not opening.
Please helpPlease try steps in this link and let me know if it helps.
https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html -
Lightroom 4 Catalog marked open - unable to open Lightroom
I was using Lightroom 4 Windows 7 64 bit, had a power bump, re-booted, now I am unable to use Lightroom. I get a message box saying "The Lightroom catalog named Lightroom 4 catalog cannot be opened because another application already has it opened Quit the other copy of Lightroom before trying to launch" To my knowledge I have no copies open!
Go to the folder that contains your catalog and in there you should find a file entitled yourcatalogname.lrcat.lock. This is the temporary lock file which is created when a catalog is opened (and thus prevents anyone else trying to use it), and is deleted when the catalog is closed. In your case, i.e. an abnormal termination, the file never got deleted so now LR thinks it's already open. Simply delete the lock file (and make sure you don't delete the catalog by mistake!), then restart LR.
EDIT: Ok, you beat me to it! Well done. -
'Unable to Launch Application Error' - Java Web Start Running Under MS IIS.
I am attempting to render the following .jnlp in MS IE:
<?xml version="1.0" encoding="utf-8"?>
<!-- JNLP File for LottoMadness Application -->
<jnlp
codebase="http://localhost/LottoMadness/"
href="LottoMadness.jnlp">
<information>
<title>LottoMadness Application</title>
<vendor>Rogers Cadenhead</vendor>
<homepage href="http://localhost/LottoMadness/"/>
<icon href="lottobigicon.gif"/>
</information>
<resources>
<j2se version="1.5"/>
<jar href="LottoMadness.jar"/>
</resources>
<application-desc main-class="LottoMadness"/>
</jnlp>I've deployed the .jnlp, .gif, and .jar to MS IIS, running locally on my PC.
When I attempt to render the .jnlp in IE I obtain an 'Application Error' window stating 'Unable to Launch Application'. Clicking details gives me:
com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://localhost/LottoMadness/LottoMadness.jnlp
at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)I have configured MS IIS for Web Start, by setting the Extension/Content Type fields to .jnlp and application/x-java-jnlp-file.
(The .jnlp is basically from 'Programming with Java in 24 Hours', as this is the book I am learning Java from.)AndrewThompson64 wrote:
I am not used to seeing references to a local server that do not include a port number.
E.G. http://localhost:8080/LottoMadness/
I have deployed the following HTML (HelpMe.html) to the web server:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Untitled</title>
</head>
<body>
Help Me!
</body>
</html>When I attempt to render the URL in IE, I see the page just fine. The URL is use is:
http://localhost/LottoMadness/HelpMe.htmlSo, I think my web server setup and usage is ok.
>
As an aside, what happens if (your MS IIS is running and) you click a direct link to..
[http://localhost/LottoMadness/LottoMadness.jnlp|http://localhost/LottoMadness/LottoMadness.jnlp]
When I click this link I get the error and exception I cited in my previous post. -
Unable to launch firefox above 3.0 after upgrade attempt
I had firefox 3.0. I tried upgrading when 3.2 came out and was unable to launch firefox after that. For each subsequent revision, I tried to upgrade but always had same problem. It does not give any error message. It just refuses to launch.So I just stopped trying to upgrade and kept using the 3.0. I use an EeePC mini notebook with XP home edition. It functions well with the other browser which I don't like to use. Any suggestion?
Hello Dieter,
We have used fully qualified domain name as the server name and all the services have been activated using SIAC_PUBLISH_ALL_INT.
The notes 808347 and 816973 have already been checked through.The browser prob i have implemented but to no help. Is there any parameter to be set in the profile parameter maintenance for SNC, I am not sure; its just a wild guess..we are not using portal as of now.
Thanks For Your Help,
Karthik -
Unable to launch Report Builder 3.0
I am running Reporting Services 2012 in Sharepoint integrated mode. I'm using Sharepoint 2010. My server is located in the US. Both my overseas and US users are unable to launch Report Builder but the errors are different.
Overseas user:
Following errors were detected during this operation.
* [05/4/2012 7:43:26 PM] System.Deployment.Application.InvalidDeploymentException (ManifestLoad)
- Exception occurred loading manifest from file MSReportBuilder.exe: the manifest may not be valid or the file could not be opened.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath)
at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath)
at System.Deployment.Application.DownloadManager.ProcessDownloadedFile(Object sender, DownloadEventArgs e)
at System.Deployment.Application.FileDownloader.DownloadModifiedEventHandler.Invoke(Object sender, DownloadEventArgs e)
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Deployment.Application.DeploymentException (InvalidManifest)
- Cannot load internal manifest from component file.
- Source:
- Stack trace:
US user:
Following errors were detected during this operation.
* [5/4/2012 11:03:17 AM] System.Runtime.InteropServices.COMException
- Failed to load the runtime. (Exception from HRESULT: 0x80131700)
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.NativeMethods.GetRequestedRuntimeInfo(String pExe, String pwszVersion, String pConfigurationFile, UInt32 startupFlags, UInt32 runtimeInfoFlags, StringBuilder pDirectory, UInt32 dwDirectory, UInt32& dwDirectoryLength,
StringBuilder pVersion, UInt32 cchBuffer, UInt32& dwLength)
at System.Deployment.Application.Win32InterOp.SystemUtils.CheckSupportedImageAndCLRVersions(String path)
at System.Deployment.Application.SubscriptionStore.CheckApplicationPayload(CommitApplicationParams commitParams)
at System.Deployment.Application.SubscriptionStore.CommitApplication(SubscriptionState& subState, CommitApplicationParams commitParams)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)Hi,
My issue is not resolved as i am also facing same issue. OS of the server is windows 2012, .net 4.5 is installed so don't need to install .net 4 separately. Here i am giving error details
PLATFORM VERSION INFO
Windows : 6.2.9200.0 (Win32NT)
Common Language Runtime
: 4.0.30319.18408
System.Deployment.dll
: 4.0.30319.17929 built by: FX45RTMREL
clr.dll : 4.0.30319.18408 built by: FX451RTMGREL
dfdll.dll : 4.0.30319.17929 built by: FX45RTMREL
dfshim.dll : 4.0.41209.0 (Main.041209-0000)
SOURCES
Deployment url
: http://xxx/sites/xxxx/_vti_bin/ReportBuilder/ReportBuilder_3_0_0_0.application?SaveLocation=http%3a%2f%2fxxx%2fsites%2fxxxx%2fDocuments
Server
: Microsoft-IIS/8.0
X-Powered-By
: ASP.NET
X-AspNet-Version: 4.0.30319
Application url
: http://xxx/sites/xxxx/_vti_bin/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
Server
: Microsoft-IIS/8.0
X-Powered-By
: ASP.NET
X-AspNet-Version: 4.0.30319
IDENTITIES
Deployment Identity
: ReportBuilder_3_0_0_0.application, Version=11.0.3000.0, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://xxx/sites/xxxx/_vti_bin/ReportBuilder/ReportBuilder_3_0_0_0.application?SaveLocation=http%3a%2f%2fxxx%2fsites%2xxxx%2fDocuments resulted in exception. Following failure messages were detected:
+ Application manifest has either a different computed hash than the one specified or no hash specified at all.
+ File, MSReportBuilder.exe.manifest, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [8/25/2014 3:37:07 AM] : Activation of http://xxx/sites/xxxx/_vti_bin/ReportBuilder/ReportBuilder_3_0_0_0.application?SaveLocation=http%3a%2f%2xxx%2fsites%2fxxxx%2fDocuments has started.
* [8/25/2014 3:37:07 AM] : Processing of deployment manifest has successfully completed.
* [8/25/2014 3:37:07 AM] : Installation of the application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [8/25/2014 3:37:10 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- Application manifest has either a different computed hash than the one specified or no hash specified at all.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, IDownloadNotification notification, DownloadOptions options, Uri&
appSourceUri, String& appManifestPath)
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, Uri& appSourceUri, String& appManifestPath)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String&
errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, MSReportBuilder.exe.manifest, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, IDownloadNotification notification, DownloadOptions options, Uri&
appSourceUri, String& appManifestPath)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available. -
How do I launch Lightroom 5.3 from Creative Cloud?
I downloaded and installed Lightroom 5.3 from Creative Cloud. I have been trying for 4 days to launch Lightroom. Each time I try,Adobe asks for a serial number or wants to know if I want to try Lightroom 5.3 for 30 days. I use an iMac 10.9.1.file:///Users/cawhet1/Desktop/Screen%20Shot%202014-02-18%20at%207.55.37%20PM.png.
Hi Crystal
I believe there have been a good number of similar instances affecting CC users. It’s worth checking your purchase history to ensure you are properly subscribed. Go to Adobe.com and near the top right of the page log-in to My Adobe, unless you are already logged-in; in which case it will say welcome next to your name.
Click on My Orders and this should show your latest invoicing. You can expand each section by clicking the small disclosure triangle icon to the left of each date.
Then click on My Products and Services. Under the products section, which sometimes takes a few seconds to refresh, you should find Lightroom and if you expand the details it should contain an automatically generated serial number.
The only suggestion I have is to Launch Lightroom again and if you see the trial screen click on licence this product and enter the serial number.
It should not really be necessary with a CC app but let us know if that works. -
Unable to launch application with webstart
Hi all, hope someone can help
I recently installed j2se 5.0 update 1 and uninstalled my earlier version of 1.4.2_06.
Since uninstalling the earlier version I am unable to run my application, I get the following error:
An error occurred while launching/running the application.
Title: Uploader
Vendor: Me
Category: Launch File Error
Could not parse launch file. Error at line 0.
This is from the exception tab:
JNLParseException[ Could not parse launch file. Error at line 0.]
at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.LaunchDownload.getUpdatedLaunchDesc(Unknown Source)
at com.sun.javaws.Launcher.downloadResources(Unknown Source)
at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
at com.sun.javaws.Launcher.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Here is a copy of my jnlp file
<?php
header('Content-type: application/x-java-jnlp-file');
echo '<?xml version="1.0" encoding="UTF-8"?>';
echo '<jnlp spec="1.0+" codebase="http://www.******.com.au/uploader/fileuploader" href="fileuploader_jnlp.php">';
echo ' <information>';
echo ' <title>Uploader</title>';
echo ' <vendor>Me</vendor>';
echo ' <homepage href="index.html" />';
echo ' <description></description>';
echo ' </information>';
echo ' <resources>';
echo ' <j2se version="1.4"/>';
echo ' <jar href="fileuploader.jar" main="true" />';
echo ' <jar href="JimiProClasses.jar" />';
echo ' </resources>';
echo ' <application-desc main-class="fileuploader.FileUploader">';
echo ' <argument>http://www.********.com.au/uploader/fileuploader/upload.php</argument>';
echo ' <argument>25/</argument>';
//echo ' <argument>100000</argument>';
//echo ' <argument>thomas:test</argument>';
echo ' </application>';
echo ' <security>';
echo ' <all-permissions/>';
echo ' </security>';
echo '</jnlp>';
?>
The application runs fine if I uninstall version 5.0 and revert to 1.4.2_06
but I would like it to be compatible with newer versions of java.
P.S. Im not a programer so if you could explain to me in simple terms what Im doing wrong it would be great.
Thanks in advance
DeanI'm a programming illiterate having the same problem with the latest java.
Unable to Launch Application
Exception:
JNLParseException[ Could not parse launch file. Error at line 0.]
at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Wrapped Exception:
java.io.EOFException: encoding.error.not.xml
at com.sun.deploy.xml.XMLEncoding.decodeXML(Unknown Source)
at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
What am I supposed to do? Java Web Start is supposed to be dummy friendly :(
Edit: Problem solved! It seems the file wasn't completely removed and parts of it were corrupted under the java viewer-resources (old cache messing it up). Once removed the problems were gone, so anyone having this problem should check that out :D
Edited by: Mr.O on Jul 21, 2008 10:32 PM -
I am just starting off with Java Web Start and trying some simple tests. Let me preface the problem statement by saying that everything is on the same machine (my Win XP Pro desktop). Also, I have confirmed that the environment is set up correctly by running the demo apps at http://java.sun.com/products/javawebstart/demos.html; these work flawlessly.
However, when I try to invoke my application it fails with a dialog that reads
Unable to launch Test JNLP ApplicationSelecting the "Details" button, displays the Download Error window. The gist of the contents of the General tab is
Unable to load resource: http://d10616:8080/aatview/test.jnlpEverything about the URL is correct. The Exception tab has a stack trace that begins with
JNLPException[category: Download Error : Exception: java.io.IOException: Server returned HTTP response code: 503 for URL: http://d10616:8080/aatview/test.jnlp : LaunchDesc: null ]Perusing this forum I read a recommendation to remove the proxy setting the JAWS Application Manager. So I did that; but then I get a failure with the General tab reading
Unsigned application requesting unrestricted access to systemCan you help?Unsigned application requesting unrestricted access to systemWell It means your application was downloaded, but if the jnlp file indicates an unrestricted access to the client, you need to sign your application.
Search for self-signed certificates in the forums to know how to generate a cert yourself and sign the jar file(s). -
Application Error: Unable to launch application
Hi guys,
My name is Jay Sun and I am new this this Forums. I am told by my professor to migrate from this Java application to Java Web Start.
I read all about it but I'm still struggling. I have an example program called Traffic Light. From the TrafficLight class,
I created a .jar file from .java file. The jar file runs perfectly fine and I created a .jnlp file using this.<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+"
codebase="file:///C:/Documents and Settings/HP_Administrator/Desktop/TrafficLight" href="TrafficLight.jnlp">
<information>
<title>Traffic Light</title>
<vendor>Java Developer Connection</vendor>
<homepage href="/jdc" />
<description>Demonstration of JNLP</description>
</information>
<offline-allowed/>
<resources>
<j2se version="1.6+" />
<jar href="TraffcLight.jar"/>
</resources>
<application-desc main-class="Traffic Light" />
</jnlp>That's my .jnlp file.
My .java file is below it.import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class TrafficLightFrame extends JFrame {
// These are the window's components
private JRadioButton[] buttons = new JRadioButton[3];
private JButton advButton;
private JProgressBar progressBar;
private JSlider slider;
private JComboBox actionList;
private JCheckBox autoButton;
public TrafficLightFrame(String title) {
super(title);
buildWindow();
setDefaultCloseOperation(EXIT_ON_CLOSE);
setSize(400, 250);
// Add all components to the frame's panel
private void buildWindow() {
GridBagLayout layout = new GridBagLayout();
GridBagConstraints constraints = new GridBagConstraints();
setLayout(layout);
// Add all the labels
JLabel label = new JLabel("Manual");
constraints.gridx = 0;
constraints.gridy = 0;
constraints.gridwidth = 1;
constraints.gridheight = 1;
constraints.weightx = 0;
constraints.weighty = 0;
constraints.fill = GridBagConstraints.NONE;
constraints.anchor = GridBagConstraints.NORTHWEST;
constraints.insets = new Insets(5, 5, 0, 0);
layout.setConstraints(label, constraints);
add(label);
label = new JLabel("Action");
constraints.gridx = 1;
layout.setConstraints(label, constraints);
add(label);
label = new JLabel("Advance");
constraints.gridx = 2;
layout.setConstraints(label, constraints);
add(label);
label = new JLabel("Timer Progress");
constraints.gridx = 0;
constraints.gridy = 4;
layout.setConstraints(label, constraints);
add(label);
// Add the Radio Buttons
ButtonGroup lights = new ButtonGroup();
JPanel aPanel = new JPanel();
aPanel.setLayout(new BoxLayout(aPanel, BoxLayout.Y_AXIS));
aPanel.setBackground(Color.black);
for (int i=0; i<3; i++) {
buttons[i] = new JRadioButton("", false);
buttons.setBackground(Color.black);
lights.add(buttons[i]);
aPanel.add(buttons[i]);
buttons[0].setText("Red");
buttons[1].setText("Yellow");
buttons[2].setText("Green");
buttons[0].setForeground(Color.red);
buttons[1].setForeground(Color.yellow);
buttons[2].setForeground(Color.green);
constraints.gridx = 0;
constraints.gridy = 1;
constraints.gridheight = 3;
constraints.fill = GridBagConstraints.BOTH;
layout.setConstraints(aPanel, constraints);
add(aPanel);
// Make the Actions List
String[] actions = {"Stop", "Yield", "Go"};
actionList = new JComboBox(actions);
constraints.gridx = 1;
constraints.gridy = 1;
constraints.gridheight = 1;
constraints.weightx = 1;
constraints.fill = GridBagConstraints.HORIZONTAL;
layout.setConstraints(actionList, constraints);
add(actionList);
// Make the Slider
slider = new JSlider(JSlider.HORIZONTAL, 0, 20, 1);
slider.setMajorTickSpacing(5);
slider.setMinorTickSpacing(1);
slider.setPaintTicks(true);
slider.setPaintLabels(true);
constraints.gridx = 1;
constraints.gridy = 3;
layout.setConstraints(slider, constraints);
add(slider);
// Add the auto checkbox button
autoButton = new JCheckBox("Auto Advance");
constraints.gridx = 1;
constraints.gridy = 2;
constraints.fill = GridBagConstraints.BOTH;
layout.setConstraints(autoButton, constraints);
add(autoButton);
// Add the Advance Picture button
advButton = new JButton(new ImageIcon("RedLight.jpg"));
constraints.gridx = 2;
constraints.gridy = 1;
constraints.gridheight = 3;
constraints.weightx = 0;
constraints.weighty = 1;
constraints.fill = GridBagConstraints.BOTH;
constraints.insets = new Insets(5, 5, 0, 5);
layout.setConstraints(advButton, constraints);
add(advButton);
// Add the progress bar
progressBar = new JProgressBar(JProgressBar.HORIZONTAL, 0, 8);
constraints.gridx = 0;
constraints.gridy = 5;
constraints.gridwidth = 3;
constraints.gridheight = 1;
constraints.weightx = 1;
constraints.weighty = 2;
constraints.fill = GridBagConstraints.BOTH;
constraints.insets = new Insets(5, 5, 5, 5);
layout.setConstraints(progressBar, constraints);
add(progressBar);
public static void main(String args[]) {
TrafficLightFrame frame = new TrafficLightFrame("Traffic Light");
frame.setVisible(true);
}When I launch the Java appliation, I get the dialog box error saying "Application Error - Unable to launch the application"
Exception:
com.sun.deploy.net.FailedDownloadException: Unable to load resource: file:/C:/Documents and Settings/HP_Administrator/Desktop/TrafficLight/TrafficLight.jnlp
at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Wrapped Exception
java.io.FileNotFoundException: C:\Documents and Settings\HP_Administrator\Desktop\TrafficLight\TrafficLight.jnlp (The system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(Unknown Source)
at java.io.FileInputStream.<init>(Unknown Source)
at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
at com.sun.deploy.net.BasicHttpRequest.doGetRequest(Unknown Source)
at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.javaws.Launcher.updateFinalLaunchDesc(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)actually there are 2 problems here:
file:///Documents and Settings/... will work, but this means the path:
/Documents and Settings/... on the current path.
if you have to include the "c:" part first, then there needs to be only 2 leading slashes, because "/C:/Documents and Settings/..." is not a leagle pathname (even after replacing the file separators).
However the colon (":") char is not legal in a URL, so has to be escaped.
Best to just use: "file:///Documents and Settings/..."
/Andy -
Java - Unable to launch application
The problem: When I try to run ASDM on my Cisco 5550, I'm getting the dialog box "Unable to launch application". When I click on "Details", I see the error: "The application has requested a version of the JRE (1.5+) that is not installed".
The system I'm running this on is a Mac Pro with OS X Lion 10.7.5, and the latest Java version 7u13.
The initial lines of "show ver" on the firewall are:
# show ver
Cisco Adaptive Security Appliance Software Version 8.2(2)
Device Manager Version 6.3(3)
This is a relatively new problem; as recently as two weeks ago I was able to run ASDM with no problem. I suspect that the latest security-related Java updates have caused something to break.
Any ideas?Solved this one on my own: The solution was to install the latest ASDM, 7.1.1_52. (This had occurred to me, but I didn't know if was compatible with the older ASA 8.2(2). It looks like it is!)
-
Unable to Launch Application error while starting IR
Dear friends
I am not a BASIS trained person, but wearing different caps because I am the only SAP engineer in our company and so learning on the job.
I have installed a new server that has (SAP ECC 6.0, EP and PI). This is an IDES version. The operating system is Windows Server 2003 R2 (64 Bit).
The menu System -> Status says that Software Component SAP_BASIS is Release 700.
The ECC part is working ok, since I have been using many custom and standard tables, Bapis etc.,
However, when I give transaction code "SXMB_IFR" to start PI, it opens the browser with a message at the top saying "You need to install Javau2122 WebStart 1.4.2. "
However, I have installed j2sdk1.4.2_17-x64 and entered the environment variable path "C:\j2sdk1.4.2_17-x64".
When I try to click on 'Integration Repository', it tries to start 'Java Web Start window and after a while fails with a message 'Unable to launch the application'.
I searched SDN and other blogs and tried suggestions like,
selecting Control Panel -> Java and removing temporary internet files. But this didn't help.
I have installed another server on a 32 bit system and that one doesn't have any issues. The main difference with this one is that it is a 64 bit server and has (ECC, EP and PI) installed on the same server.
I would appreciate any feedback or suggestions.
Thanks
RamDear Ram
install JDK then
first set your environment variable like this... upto ur java bin folder.
JAVE_HOME C:\Program Files\Java\jre6\bin
then run your java webstart . goto preferences and there make proxy as none
now start IR again.. it will start.. if it fails again then take 1-2 more trial to start . It will open.
IN SAP XI/PI, java webstart is used to cache fat clients like IR and ID on local machines. So you need to make JWS proxy as NONE and then run IR or ID. with in 1-2 attemt it will cache all the required files.
then after wards it will run smoothly.
good luck
--sandeep
Maybe you are looking for
-
I have iTunes 10.6.3.25 and I can't find my audiobooks that I downloaded from a library website. The audiobook tab is visible in iTunes but none of the audiobooks are there. They are on my iPod nano. Please help!
-
Hi Guys Is there a report/transaction in SAP where I can view all the changes that have occurred on the Customre/Vendor master data... other than the XD04/XK04.. Thank you Rukshana
-
Problem in XML Message creation using ABAP Proxy
Hi, I am trying to send the data from ECC to CRM when post goods issue is done for a delivery from ECC side using ABP Proxy. I called my proxy method in BADI : DELIVERY_PUBLISH. And after calling the method, I used commit work also. But the problem i
-
How can I get id of padlock icon? It's annoying.
The padlock icon that tells you the site is secure or not secure (open or closed padlock) is almost 2" square and is in the middle of my screen. It blocks the info under it. How can I get rid of it? Why can't it just show and then leave? Why does it
-
my question is: How to transform a list of characters of values of time that have format HH:MMS to a list or adjustment of numerical values, to be able to use them in a code of LabVIEW? The numeric data are going to be used to plot them in a graph XY