Unable to launch Premier Pro 1.5

I have for the first time installed Premier Pro 1.5 on WIndows Vista version and cannot get it to work. What should be done? I use a Toshiba Satellite laptop computer. How do I also get the software plug-in to work?
Thanks.
K.O.

Welcome to the forum.
As Jeremy points out, it might not be possible, but then again, it might.
Let's go to the beginning. When you installed PrPro 1.5, did the installation go well? Any error messages?
If the installation went well, are you running as Administrator?
When you launch PrPro, you will get a Splash Screen. There is a tiny line of text that indicates what is loading. Does your launch get past the Splash Screen? If not, what is the last line of text (you have to look closely, as it is small)? It is likely that that is the module, .dll, etc., that is halting the launch. Or, it could be the next, the one that we do not see. Still, knowing the last line could be useful. If necessary, set up a video camera to record the Splash Screen and then play back the tape, pausing on the last entry in that line of text. This ARTICLE might be helpful, especially if you have any VST's installed on your system, say from an audio-editor.
Good luck, and let us know how it goes.
Hunt

Similar Messages

Launching premier pro CC2014 trial error

Every time I attempt to launch Premier Pro CC2014 Trial, I get the error message: [/ppro801/releases/2014.03/shared/adobe/MediaCore/ASL/Foundation/Src/DirectoryRegistry.cp p-283]
and application quits.
How can I overcome this problem.

From the screen shot shared by you it seems you are working on Windows XP which doesn't meet the minimum system requirement to run Premiere pro CS6.
Check :- http://www.adobe.com/products/premiere/tech-specs.edu.html

Error launching Premier Pro after update

I am unable to launch PP. When it lauches I get an immediate error:
Premiere Pro has encountered an error.
[/sirreel64/releases/2013.02/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/../../Src/Dire ctoryRegistry.cpp-283]
On brand new imac-27, latest os10
I've uninstalled and re-installed and continue to get error. All other CC Suite products launch just fine...

Please see if the advice here helps: http://premierepro.wikia.com/wiki/Error:DirectoryRegistry.cpp-283
Also, do you have a Documents folder at the standard location and does it contain the Adobe/Premiere Pro folder: /Users/<USERNAME>/Documents/Adobe/Premiere Pro. If so, is Premiere installed on the same partition as this Documents folder?

Unable to launch Premiere Pro CC

Hi, I've downloaded Creative Cloud, and Premiere Pro.
On launching Premiere Pro, it gets to "ImporterQuicktime.prm"
Then I get an error message: "Premiere Pro could not find any capable video play modules"
I've signed in and out of CC, updated the graphics drivers & tried running as administrator.
It worked fine with CS6.
What next? I'm hoping to move to CC on 3 other edit desks - so I need to see one running right first!
System spec:
Windows 7 Professional
Intel core i7-3930K CPU @ 3.20GHz
32gb ram
NVIDIA GeForce GTX 660 Ti GeForce driver 320.18

Hi, same here.
My System:
Dell Preciion M4700
Windos 7 64 Bit
Intel i7-3740QM
ATI FirePro M4000
8GB RAM
With my old graphic card Premiere crashed with the Message "Premiere Pro could not find any capable video play modules" or just right after start. I´ve tested a lot, updated Drivers and finally bought a new graphic card because my old one (Nvidia K1000M) was not listed as compatible card. With this new card, Premiere crashed instandly.
Finally the Vista compatability mode does the job. Whats wrong?
Thanks,
Jens

Unable to launch Soundtrack Pro 2.0.1 (Fresh Install)

I've just installed Logic Studio on a clean installation of Leopard (10.5.1) on my dual 2ghz G5. For some reason Soundtrack Pro 2.0.1 immediately quits upon launch with the error *"The application Soundtrack Pro quit unexpectedly."*
I've attempted to reinstall only Soundtrack Pro 2 from the Logic Studio disc, but this does not resolve the issue.
Prior to installing Logic Studio, I had installed Final Cut Studio 1 (which included Soundtrack Pro version 1), so I don't know if this prior installation in some way conflicted with it.
=============
Here are the specific details of the error report.
Process: Soundtrack Pro [3357]
Path: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Identifier: com.apple.soundtrackpro
Version: ??? (???)
Build Info: SoundtrackProProject-6430000~16
Code Type: PPC (Native)
Parent Process: launchd [138]
Date/Time: 2007-11-30 16:47:11.426 -0600
OS Version: Mac OS X 10.5.1 (9B18)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x000000008fe0105c
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/ProMetadataSupport.framework/Versions/A/ProMetadataSupport
Referenced from: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Reason: image not found
===
If anyone has any ideas or suggestions it would be much appreciated!

I've figured it out!
I'm posting the solution here in hopes that it will help out anyone else who may be running into this issue.
For some reason the Logic Studio installer was not installing the ProAppsMetaDataSupport framework needed by Soundtrack Pro 2. This may have to do with my previous existing installation of Final Cut Studio 1, which contained Soundtrack Pro 1 and Compressor 2.3.1.
Here's what I did to remedy my issue...
1) Delete all Soundtrack Pro 1.x system files
2) Delete all Compressor & QMaster files (for directions, see:
http://docs.info.apple.com/article.html?artnum=302845
3) Upon running Logic Studio, I noticed that though I could install Soundtrack Pro 2, the option to install Compressor was grayed out and indicated 'Skip'. I quite the installer and realized it was necessary to install Compressor directly using the package file.
4) On the Logic Studio disc, control-click the *Install Logic Studio* icon and select *Show Original*. This will take you to a hidden folder containing all of the individual installation packages.
4) To install Compressor first, open Compressor.mpkg
5) After I installed Compressor, I chose to run the main Logic Studio installer, and chose to install Soundtrack Pro.The installation for Soundtrack Pro should run normally, and it should install the ProMetaDataframework automatically.
I also did notice that the installation packages folder did contain an entry for ProAppsMetadataSupport.pkg, so you may be able to run this if it for some reason doesn't install.
After this, both applications finally launched perfectly! Ok, time for bed.

Startup error when launching premier pro cc 2014

I am able to launch earlier versions of premiere pro on my mac, but newly downloaded premiere pro hangs at startup.

Without knowing what Mac exactly nobody can say anything. Either way, ask in the Premiere forum.
Mylenium

Problem in launching premier pro cc

Hello, after having installed and uninstalled first pro cc in the cloud, I can not seem to launch the application. thank you

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
>after having installed and uninstalled first pro cc in the cloud, I can not seem to launch the application
Ah... how do you expect a program to launch after you do an uninstall?

When I launch Premier Pro is says this program has encounter a problem and will now close. ??

PP will not open. It want to close as soon as I launch it??? I have updated it to the last version.

Hi Danny3380,
Thanks for choosing adobe forums,
please provide following information :
What is the OS and version ?
What is the Graphics Card installed on the system ?
How much Ram do you have ?
Do you use any external Hard Drive ?
Are you using security software e.g. Norton, etc
and
if windows, Please check if you have windows defender turned on ?
Regards,
Sandeep

How do I launch premier pro

After installing

If it's a Windows Computer, you can launch it from Start > All programs
If it's a Mac, go to Applications and launch it.

When i try to launch premier pro, it says error and gives me the error code 1. what does this mean

and how do i fix it

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

How do I install Title Designer Presets in Premier Pro CC?

I follwed the precedure on the link to install Title Designer presets in Premier Pro CC. When I re-launched Premier Pro the presets had not been install. Also, the link took me to instructs for CS6 and CS5 versions. No CC version.

The fuctional content for CC is the same as for CS6.
http://helpx.adobe.com/x-productkb/multi/library-functional-content-missing.html

Premier Pro CC 7.2.2 crashes on launch in Windows 7, probably self inflicted problem...

I installed PPCC 7.2.2 because I wanted to test the content analyzer to text functionality.
I started the software, loaded a file, and started the analyzer. It then passed this over to Media Encoder as expected and the process chugged along merrily for about 30 minutes. At which point I got bored and decide to stop the process and use a much smaller file to test with.
So, despite years of experience and knowing better I tried stopping the process, and when it wouldn't end I used the Windows Task Manager to kill the process in Media Encoder.
Now when I try to start Premier Pro CC 7.2.2 it crashes on launch and gives me the very descriptive message "Adope Premier Pro CC has stopped working."
My initial attempt to fix this was to uninstall PPCC 7.2.2 and reinstall it. That didn't help.
Based on 38+ years of programming experience I suspect there is a corrupted temp file floating around that PPCC is finding when it launches. So, I looked every place I could think of for temp files and/or crash dumps and deleted them all.
All the "crash on launch" discussions I have found so far refer to MAC systems, so I'm not sure where to look to repair the damage.
Anyone have any ideas on "the most likely" cause of the problem and what I need to clean up to fix it?
Thanks, Bobw

I uninstalled Quicktime, rebooted 3 times to clear the Windows registry cache, reinstalled Quicktime, rebooted, then tried running PMPRCC 7.2.2.
I got the same non-descript error. So, I checked the Resource Monitor it it showed only PMPRCC7.2.2 hung. I checked the wait chain and it looks like this:
Adobe Premier Pro.exe (PIC:7996) Thread: 1452
                Adobe Premier Pro.exe (PIC:7996) Thread: 4152
Adobe Premier Pro.exe (PIC:7996) Thread: 5672
Adobe Premier Pro.exe (PIC:7996) Thread: 51042
Adobe Premier Pro.exe (PIC:7996) Thread: 1452
                Adobe Premier Pro.exe (PIC:7996) Thread: 4152
I grabbed screen shots of all that, and also grabbed the lists of "Associated Handles" and "Associated Modules."   I'm going to review the list of handles to see if there I can identify a file that has a date/time stamp near the time the problems start.   Let me know if you want me to post either or both lists.

I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to l

I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to launch any of my programs from adobe. I tried to do a trail with a program and I am still getting the same message.

Davinci thank you for the update.
Please utilize any available uninstallers that are located in the Applications/Utilities/Adobe Installers folder. Once all of the available uninstallers have been run you will then want to rerun the CC Cleaner Tool. You can find directions on the use of the CC Cleaner Tool and a download link at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html. After the CC Cleaner Tool is run then please reinstall the Creative Cloud Desktop application from Creative Cloud Help | Creative Cloud for desktop.
The CC Cleaner Tool is designed to be used after running the uninstallers. Without running the uninstallers first then a complete removal may not be possible.

Unable to launch project schedule in project pro 2010 via the icon in project center on project server 2010

Unable to launch a project in project pro 2010 via the icon in project server 2010 project center. Nothing happens. The pull down "open" menu doesn't do anything either. Can't open the schedule in project pro in read-only or edit mode.
This is happens to a handful of project managers. Can't find a common thread.
Janice Weaver

Hi Brian - the latest 'weight on my shoulders' was vacation :) - so just catching up - first day back. We do have a fix coming in August CU for a problem that sounds very similar - but we would need to see your data to confirm if this is the case
or not. So the choices at the moment are to wait until we release the week after next, or open a support incident - but we would likely need assistance from your DBA to either run some queries or get us a copy of the DBs.
Best regards,
Brian.
Blog |
Facebook | Twitter | Posting is provided "AS IS" with no warranties, and confers no rights.
Project Server TechCenter |
Project Developer Center |
Project Server Help | Project Product Page

Unable to Launch Adobe Premiere Pro CS6 using High-Performance on AMD Radeon Graphic Card

I have been unable to launch Adobe Premiere Pro since installing it with the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again"
Here are my specs:
Lenovo Ideapad U400
Windows 7 (64bit)
Intel i5 2.5 ghz processor
AMD Radeon 6470M graphics card
The only occasion during which I have successfully launched Premiere Pro was after reverting to the default graphics card on my computer and uninstalling AMD Radeon, otherwise, I have tried to change Premiere Pro to run on High-Performance on Catalyst Control Center to no avail, I do not wish to revert to the Standard Graphics Card as it slows down my computers performance one hell of a lot, neither do I wish to have to constantly uninstall and reinstall my AMD Radeon Graphics Card when I use Premiere Pro. Thank you for your time.

Update:
- with Intel (R) HD Graphics Card disabled, Catalyst Control Center reports that no AMD Graphic card is installed
- using Device Manager under Control Panel, AMD Radeon 6470M was verified to be up-to-date
- Premiere Pro works so long as I disable the Intel card before launch, however, I re-enable it upon startup to get rid of the 800x600 resolution
- AMD Mobility Radeon Driver Verification Tool is unable to verify and update my driver, refers me to lenovo to update it.
- My graphics card is up-to-date as verified by lenovo
- Intel (R) HD Graphics Card now up-to-date
- Display currently mainly using Intel (R) HD Graphics Card (Possibly why it caps resolution at 1024x768 when disabled) I'm not sure how to switch the main Graphics Card used, Catalyst Control Center doesn't seem to have the option.
- when disabled, computer reverts to vgasave instead of Radeon
- Disabling Radeon does nothing to existing display
- After updating my Intel card, Catalyst Control Center reported CCC was not supported by the current display adapter
- CCC worked after rolling back Intel card
From what I infer, I believe the problem to root from my intel card being the main card used, if there is anyway to switch my radeon card to the default instead of the Intel card, do tell me, I believe this may solve the problem, I apologise for troubling you guys, and I'm starting to feel that I shouldn't be troubling Adobe with my problem with AMD, this discussion is probably really out of place but I hope it will help out others with a similar problem.

Unable to launch Premier Pro 1.5

Similar Messages

Maybe you are looking for