Unable to link another pc to Homegroup

I have 2 x HP desktops both running Win 8 64bit.
I can set up a Homegroup on either or both pcs but I cannot get either to connect to the other Homegroup, whether there is only 1 Homegroup in existence on either pc or a Homegroup established on both pcs and a connection is attempted from either end.
i have run the Homegroup and Network troubleshooters and they either find nothing wrong or when I ask for further help they either refer me to here or offer to phone a friend.
I have set up sharing at both ends to allow everyone all permissions but to no avail.
My network is arranged with the main-pc hard-wired to the broadband router and the other pc wirelessly networked using the type of adapter that plugs into the mains.
If I try to access the other pc from either end in networking I am asked for a login username and password which I did not set up initially.
Your assistance please.

What specifically happens when you try to join the 2nd PC to the 1st PC's homegroup?
This document covers what should happen when creating a homegroup and joining a PC to a homegroup. At what step does what you see differ from the steps listed in the document?
Do you any error messages? If so, what are they?
My network is arranged with the main-pc hard-wired to the broadband router and the other pc wirelessly networked using the type of adapter that plugs into the mains.
For some reason, I can't seem to picture how the devices are connected to the network. How exactly is the 2nd PC connected to the router wirelessly? Sorry if I am being a little dense and just not seeing how the topology.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

HT1420 My laptop crashed completely and I need to authorize a new laptop to enable it sync with itunes. I have 5 computers authorized so I am unable to add another one so I need to unauthorize the bad laptop that is no longer working. How do I authorize n

My laptop crashed completely and I need to authorize a new laptop to enable it sync with itunes. I have 5 computers authorized so I am unable to add another one so I need to unauthorize the bad laptop that is no longer working. How do I authorize new Laptop?

You can only deauthorize everything to do that. Click on Account under Quick Links. You can deauthorize all five there. But you can only do this once a year.

How to link another forms and reports in one main forms?

hai all,
how to link another forms and reports in one main forms?
i am creating Custom forms Main_menu
in that i am puting on button and
pl/sql code for when-button-pressed
BEGIN
Open_form('GROUP_MSTR_ENTRY');
END;
i am getting:
ERROR:frm-40010: cannot read form GROUP_MSTR_ENTRY
also i am un able change the text colour in form.
how to link reports in forms?
any help?
before open i have to link all form i need?
thanks in advance
rcs
------

even after changing to The forms_path variable and
put the executable(GROUP_MSTR_ENTRY.fmx
F:\oracle\ora90\FORMS60\server\FACCT\MAIN_MENU\GROUP_MSTR_ENTRY.FMX
not working
also i am un able change the text colour in form. how?
how i can find?
$ORACLE_HOME/forms/server/default.env
my files are
9i oracle database
SQL*Plus: Release 9.0.1.0.1 - Production on Fri Dec 19 11:37:07 2008
E:\oracle\ora90\bin\oemapp.batt
forms6i
F:\oracle\ora901\bin\
since 9i is later than forms 6i i am unable to put in the same directory
------------

Unable to link incompatible devices. Please update all out of date devices

I just recently got the trio kit with two DM100's and the wireless controller.
Linksys Easy Link Advisor (LELA) does not install the controller, but it was able to be installed with most functionality manually. (running windows xp 64)
Right Now I am getting the error "unable to link incompatible devices. Please update all out of date devices" when I try to link my zones named Player1 and Player2 for party mode. When viewing details they show different firmware versions (1.7.3 and 1.23.31). I have tried to update, but they show up as completely updated in LELA.
How can I force a firmware upgrade? I did a search, and the help file was of no use. There is also no download available.
For the next gen of linksys home audio, how about a standard webconfig/telnet where I can define a static IP address for the wired and wireless connections? Eventually I hope to start up wireshark and see how this all works, because the system is cumbersome in its current state.
Solved!
Go to Solution.

Basically, Leave it powered on, connected to the internet over the weekend.
Another user also mentioned:
You can force the update to happen by using the Media Center Sofware.
   1. Open media center software
   2. Mouse over the DMP-100 player window and right click to expose menu
   3. Select About to see current firmware version and option to update.
I did this, and it updated...eventually. Took overnight (>3hours), and there was no user feedback/acknoledgment that the command had been received/processed/completed.

Unable to link media to MTS files in Premiere CS6 after updating to 10.8.3

I am now unable to link media(MTS files) in Premiere pro CS6 after updating to 10.8.3. Instead of the folder where the MTS files where there is now "AVCHD" with the quicktime symbol. When I control click, it just offers me with the quick look option. Any advice would be very much appreciated.

Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Unable to link click box to Word document

I am using Captivate 2 to create a click box. On success the
click box should open a Word document in a new window. I have saved
the Word document in the same folder with my swf. After testing the
click box, I get an error message IE was unable to link to the Web
page you requested. The page might be temporarily unavailable.
What is weird that the Open URL or File on success works fine
if I set the Word document to open in the current window. This
option is not possible, because I do not want users leaving the
course. Am I doing something wrong? Please advise.

I'm facing this problem since Captivate 2
but I just skip the link file part....
But now i doing my personal portfolio
which got huge link pdf and mpeg link file...
so I've tried Captiv8r method
but after publish into .exe
when i click the clickbox
i will appear ERROR sign and won't open the link pdf file
I've followed all the steps:
1. From Captivate, click File > Create a MenuBuilder
project...
2. Choose the "Blank Project" type and click OK.
3. Click Options > Project Options...
4. Change the Width to 320 and the Height to 200 (These are
the minimum settings)
5. Click OK to dismiss the Project options.
6. Click Insert > Clickbox...
7. You should see a "New Clickbox" dialog. There should be an
empty field labeled "Link".
8. Type only your document file name into the Link field.
9. Place a check mark in the "Save file with project" check
box, and click OK to dismiss the dialog.
10. You may see a warning dialog where MenuBuilder is
quibbling about the document not being present. Don't let this fool
you. Just click NO to advise you don't wish to browse for the file.
11. At this point you should see a small object on your
MenuBuilder. It should say "Clickbox" and be positioned in the
middle of the project.
12. Drag the sizing handles until it totally covers the area.
It should totally cover the whole area.
13. Now click the Export toolbar button.
14. MenuBuilder will then prompt you to save the project. Go
ahead and give it a name to appease it and click the Save button.
15. Select "Flash Movie" from the Export Options dialog and
click Next >.
16. Type a file name, choose a location to store the movie,
make sure the "View project after export" option is NOT selected,
then click the Finish button.
17. Now you may close MenuBuilder. You are finished with it.
We go back to Captivate.
18. In Captivate, open the slide with the link you wish to
use to open the document. The goal here is to click Insert >
Animation... and suck in the .SWF you created using MenuBuilder.
19.Then position that over an image or something that will
clue your user to click it.
I've follow all the step
but in NO.8 & No.9
If I just type the file name (and no link)
I can't place a check mark in the "Save file with project"
check box
and when I import the swf into Captivate
It will show a message:
"Adobe Captivate - Captivate link test.cp
The Adobe Flash file contains action script that reference
"root". This might cause the adobe captivate project to work
incorrectly or to stop working. do u want to continue to add this
file?"
and After burning in to CD
I can't open the PDF link file!
and it will jump out a ERROR:F sign! (actually what is the
"F" means? FXXK? haha~)
After several times try and error
I've slightly make some changes at NO.8 procedure:
8. Type only your document file name into the Link field.
(I've choose and place the file with whole link & file
name,
which is: C:\Unzipped\Captivate testing\D herbal tea
Leaflet(C).pdf
and then now I can check the "save file with project"
checkbox)
after output to a swf and insert animation in captivate
although captivate also show the "Adobe Captivate - Captivate
link test.cp
The Adobe Flash file contains action script that reference
"root". This might cause the adobe captivate project to work
incorrectly or to stop working. do u want to continue to add this
file?" message
but now i can open the link file (in same folder with .exe
publish file)
in any other computer!
I've checked the action script inside the link.swf which i've
created, and get the result:
// Action script...
on (release)
var szArg = "D herbal tea Leaflet(C).pdf";
var szWindow = "_blank";
if (_root.FlashPlayer == "1")
getURL("FSCommand:execfile", szArg);
else
getURL(szArg, szWindow);
} // end if
it shows the file name only!
Now it's no problem!
PS: U cannot open the link file under preview mode
it won't open
but after publish into .exe
u can open the link file!
Sorry my english is very poor
anyone don't understand can download my testing project from
here:
http://rapidshare.com/files/71506514/Captivate_testing.zip
Thanks Captiv8r again for helping us!
Lulu
Malaysia, Kuala Lumpur

How to Link another JSP Page in the same portal component

Hi Guys,
I am a new guy to SAP, currently, I want to add href link to another JSP in the same component, so I used <a href="<%=webpath%>/jsp/AboutPage.jsp">, but obviously, the link can not display target page due to privilege restriction, does anyone know how to resolve this problem? thanks very much!
Best Regards
James

Thanks srinivas,
   Sorry for late response, too busy yesterday.
   Currently, I want to create a URL link in the page which links another JSP page in the same portal component, but the problem is this JSP page is under PORTAL-INF folder, so due to privilege problem, I can not create the link like the following:
<a href="jsp/test.jsp">Link</a>
   I konw if I move test.jsp out of folder PORTAL-INF, the above way should work, but then, I found the JSP page can not access componentRequest and get resource bundle object.
Am I clear, please let me know, thanks!
Regards.
James

[EJB:015001]Unable to link class while server start up.

I am getting the below exception during weblogic server start up.
In the server under autodeploy folder there exist a class - AccountCacheLoaderMDB. I clue less, what is the cause for this exception. Can anyone help me out in solving this issue please,its urgent
<Jun 2, 2011 10:23:01 AM EDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'gts' due to error weblogic.application.ModuleException: Exception preparing module: EJBModule(autodeploy)
[EJB:011023]An error occurred while reading the deployment descriptor. The error was:
Error processing annotations: ..
weblogic.application.ModuleException: Exception preparing module: EJBModule(autodeploy)
[EJB:011023]An error occurred while reading the deployment descriptor. The error was:
Error processing annotations: .
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:454)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
     Truncated. see log file for complete stacktrace
weblogic.utils.ErrorCollectionException:
There are 1 nested errors:
weblogic.j2ee.dd.xml.AnnotationProcessException: [EJB:015001]Unable to link class sepact.sepact-app.com.citi.gts.alto.accountservice.service.AccountCacheLoaderMDB in Jar C:\Oracle\user_projects\domains\base_domain\autodeploy : java.lang.NoClassDefFoundError: sepact/sepact-app/com/citi/gts/alto/accountservice/service/AccountCacheLoaderMDB (wrong name: com/citi/gts/alto/accountservice/service/AccountCacheLoaderMDB)
     at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.addProcessingError(BaseJ2eeAnnotationProcessor.java:1272)
     at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.addFatalProcessingError(BaseJ2eeAnnotationProcessor.java:1277)
     at weblogic.ejb.container.dd.xml.EjbAnnotationProcessor.processAnnotations(EjbAnnotationProcessor.java:168)
     at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.processStandardAnnotations(EjbDescriptorReaderImpl.java:332)
     at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.createReadOnlyDescriptorFromJarFile(EjbDescriptorReaderImpl.java:192)
     at weblogic.ejb.spi.EjbDescriptorFactory.createReadOnlyDescriptorFromJarFile(EjbDescriptorFactory.java:93)
     at weblogic.ejb.container.deployer.EJBModule.loadEJBDescriptor(EJBModule.java:1210)
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:382)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:609)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:185)
     at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:40)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
     at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.addProcessingError(BaseJ2eeAnnotationProcessor.java:1271)
     at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.addFatalProcessingError(BaseJ2eeAnnotationProcessor.java:1277)
     at weblogic.ejb.container.dd.xml.EjbAnnotationProcessor.processAnnotations(EjbAnnotationProcessor.java:168)
     at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.processStandardAnnotations(EjbDescriptorReaderImpl.java:332)
     at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.createReadOnlyDescriptorFromJarFile(EjbDescriptorReaderImpl.java:192)
     Truncated. see log file for complete stacktrace
>
===============================================================
Here is the message driven bean.
package com.xxx.gts.alto.accountservice.service;
import com.xxx.gts.alto.accountservice.adapter.AccountAdapter;
import com.xxx.gts.alto.accountservice.util.AccBeanUtil;
import com.xxx.gts.alto.accountservice.util.AccountConstants;
import com.xxx.gts.alto.accountservice.util.AccountLoader;
import org.apache.log4j.Logger;
import org.springframework.beans.factory.BeanFactory;
import javax.ejb.ActivationConfigProperty;
import javax.ejb.EJB;
import javax.ejb.MessageDriven;
import javax.ejb.TransactionAttribute;
import javax.ejb.TransactionAttributeType;
import javax.ejb.TransactionManagement;
import javax.ejb.TransactionManagementType;
import javax.jms.Message;
import javax.jms.MessageListener;
import javax.jms.TextMessage;
* MDB for the Account Cache Loader.
@MessageDriven(mappedName = "AccountCacheLoaderQueue", activationConfig = {@ActivationConfigProperty(propertyName = "destinationType", propertyValue = "javax.jms.Queue"),@ActivationConfigProperty(propertyName = "destinationName", propertyValue = "AccountCacheLoaderQueue")})
@TransactionManagement(value = TransactionManagementType.CONTAINER)
@TransactionAttribute(value = TransactionAttributeType.NOT_SUPPORTED)
public class AccountCacheLoaderMDB implements MessageListener {
private static Logger logger = Logger.getLogger(AccountCacheLoaderMDB.class.getName());
private static final String LOCAL_ADAPATER = AccBeanUtil.getProperty(AccountConstants.ADAPTER_ID);
private static final String TOKEN_SEPARATOR = ","; // \\s
@EJB
private BeanFactory beanFactory;
public void onMessage(Message message) {
logger.debug("Entering onMessage of AccountCacheLoaderMDB");
try {
if (message instanceof TextMessage) {
TextMessage tmsg = (TextMessage) message;
String[] msgArr = tmsg.getText().split(TOKEN_SEPARATOR);
logger.debug("Trying to get AccountAdapter");
AccountAdapter acctAdapter = (AccountAdapter) beanFactory.getBean(LOCAL_ADAPATER);
if (acctAdapter == null) {
throw new RuntimeException("Account Adapter cannot be determined.");
for (String msg : msgArr) {
if (msg.equalsIgnoreCase(AccountConstants.ACC_RELOAD)) {
logger.debug("Calling AccountLoader.load");
AccountLoader.load(acctAdapter);
} else if (msg.equalsIgnoreCase(AccountConstants.BIC_RELOAD)) {
logger.debug("Calling AccountLoader.loadBicData");
AccountLoader.loadBicData(acctAdapter);
} catch (Exception e) {
logger.error("Error while loading Account.", e);
throw new RuntimeException(e);
logger.debug("Exiting onMessage of AccountCacheLoaderMDB");
can any one throw some light please...its urgent

Your class seems to be in the wrong folder structure.
instead of sepact/sepact-app/com/citi/gts/alto/accountservice/service/ it needs to be in com/citi/gts/alto/accountservice/service/ which matches the folder structure.

Linking another URL to an existing iWeb site?

Is it possible to link another URL that I have registered (with GoDaddy) so that it connects directly with the URL associated with my iWeb site?
Thanks so much for any advice.
Steve Pressman

Use masked web forwarding and forward your domain name to web.me.com/username/sitename.
If you have used CNAME forwarding once, then you need to use web forwarding for your other domain name.

Unable to link layers in Photoshop CS

I have Photoshop CS. In the box showing the layers I've made, there is no longer a small checking box to the left of each enabling me to link a layer with others. If I hold the cursor over the looped "link" symbol at the bottom, an "unavailable" symbol appears. Does anyone know how I get the link boxes back please? Thanks David5119

Thank you. I didn't know I could select more than one layer by holding down the Ctrl key and that, when I do that, the link symbol appears. Don't know at what point the link check boxes disappeared as they were certainly there originally; maybe when I reinstalled Photoshop for some reason. But a big thank you - your advice worked. David5119
Date: Mon, 17 Jun 2013 08:42:28 -0700
From: [email protected]
To: [email protected]
Subject: Unable to link layers in Photoshop CS
    Re: Unable to link layers in Photoshop CS
    created by R_Kelly in Photoshop for Beginners - View the full discussion
Hi,
It sounds like you have an photoshop version cs2 or newer.
To link layers in photoshop cs2 and newer versions, the layers you want to link need to be selected first in the layers panel and then press the link icon at the bottom of the layers panel.
    http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5416047-347439/264-488/Untitle d-1.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5416047#5416047
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5416047#5416047
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5416047#5416047. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop for Beginners by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Every time i click on a link another random link pops up in a new window. Does this mean i have a virus on my mac?

every time i click on a link another random link pops up in a new window. Does this mean i have a virus on my mac?

No; it means that the computer has adware. Click here and follow the instructions, or if there’s a type of adware not covered by them on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(122523)

I have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os)

i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.

Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

Unable to link a Document Info Record to BOM

Hi SAP Consultants,
We are in the process of linking DMS with BOM in SAP 4.7.
While Creating a DIR in CV01n we are unable to link a BOM because when we click the Object links tab it is displaying the following message:
<b>Object link to STKO_DOC cannot be changed in this transaction</b>
We also tried on the Other side. We created a BOM and linked a document to that. While opening that Document in CV03N, we are unable to view the linked BOM and gives the error same error.
Kindly provide the support for the above issues.

Hi
Did you check in the configuration under cross applications and DMS whether the object link to BOM is created and complete.
Mostly that should solve the issue. When you create a document using cv01n you should be able link to BOM.
MY guess is there is something wrong in the customization area
Hope it helps
Cheers
Badri

Unable to link tables crystal reports 2008

I am using wsdl file to pull data, but i am unable to link tables in the links tab. can anyone help me how to do this. or do you think something is wrong with the wsdl file Thank you in advance

hi,
i have the same problemm.
did u solve it, or you just gave up?
temir

Unable to link My Best Buy account

I'm unable to link my accounts. I've had issues with my account before which required a customer service rep to fix. I can look my account number up using my email address and phone number, but when I try to link my account using the same member id and phone number, it tells me my information is incorrect. Can you help?

Good morning garaux,
Welcome to the Best Buy forum, and thank you for posting!
I used the email address you registered with the forum to review your account information, and it appears that we may have multiple phone numbers on file for you. That could explain why you are having a difficult time linking your BestBuy.com and My Best Buy accounts. To ensure your information is up-to-date, I will be sending you a private message. You can check your private messages by logging into the forum and clicking on the envelope icon located at the top of the page.
How to Link a My Best Buy™ and BestBuy.com Account
Warmest Regards,
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Unable to link another pc to Homegroup

Similar Messages

Maybe you are looking for