Unable to link layers in Photoshop CS

I have Photoshop CS. In the box showing the layers I've made, there is no longer a small checking box to the left of each enabling me to link a layer with others. If I hold the cursor over the looped "link" symbol at the bottom, an "unavailable" symbol appears. Does anyone know how I get the link boxes back please? Thanks David5119

Thank you. I didn't know I could select more than one layer by holding down the Ctrl key and that, when I do that, the link symbol appears. Don't know at what point the link check boxes disappeared as they were certainly there originally; maybe when I reinstalled Photoshop for some reason. But a big thank you - your advice worked. David5119
Date: Mon, 17 Jun 2013 08:42:28 -0700
From: [email protected]
To: [email protected]
Subject: Unable to link layers in Photoshop CS
    Re: Unable to link layers in Photoshop CS
    created by R_Kelly in Photoshop for Beginners - View the full discussion
Hi,
It sounds like you have an photoshop version cs2 or newer.
To link layers in photoshop cs2 and newer versions, the layers you want to link need to be selected first in the layers panel and then press the link icon at the bottom of the layers panel.
    http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5416047-347439/264-488/Untitle d-1.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5416047#5416047
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5416047#5416047
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5416047#5416047. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop for Beginners by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

While searching for a photo, my Mac went into endless loop, so had to shut it down using button. After restart, highlightrd text looked "different." Also unable to highlight layers in Photoshop.

I was searching for a photo on myiMac when it went into an endless loop. Only way I could think of to stop was using the button at the back of my computer. After restart, had to erase text in Appleworks one character at a time, because highlighter did not work properly; also looked "different: when typing on an internet website . ..and was unable to highlight layers (in Photoshop). What did I do wrong? and How can I correct it? PS: Also unable to edit my system. (Am only using my iMac Intel these days, with OS X.4.11)

Anybody able to help me out with this one? West coast, you awake yet?

Linking layers in Photoshop CS2

I have just upgraded to CS2 from v.7 and I cannot believe that I now have to have each layer I want to link right next to one another in the layers palette! In v. 7 you could just click on a layer and then choose any other layer in the palette, regardless of its position, to link with by using the link box. It appears in CS2 that you must use the shift key and stack each layer together that you want to link. This is hugely laborious and really counter-productive! Some layers must retain their position in the palette (under/over a shadow for example) and yet I may want to move them in conjunction with a layer elsewhere in the heirarchy. Please tell me there's another way to link!
Thanks, Sandy

>I now have to have each layer I want to link right next to one another in the layers palette!
not true.
just select all layers you want to link using the command key and click the link button.
Also because of the better way you can select as many layers at a time as needed, actually linking isn't all that necessary anymore. Also the use of folders/sets in the layers pallet if you want to keep things together.

URGENT NEED: Using Photoshop CC, is there a way to auto-center linked layers to a specific area on data merge?

I'm looking for a way to auto-center a group of linked layers to a specific area after being data-merged in Photoshop CC. The text needs to be all left-justified within the area in question, so I'm looking for a way that once the merged data comes in, the layers automatically center themselves within the area.

Yes. For example do a select all or make a selection of the area. Target the layer you want to align to that and use menu Layer>Align Layers to Selection>Location...
Use this menu twice to align the layer(s) to one of the nine positions og a tick tack toe board are of the selection.
Example center layer over center of the canvas
Select All
target top layer
Layer>Align Layers to Selection>Vertical center...
Layer>Align Layers to Selection>Horizontal center...
If you select a group of layers that are linked I would expect the group's layers center would be over the center of the canvas. However I have not mad that test it would be easy to test try it. You may even only need to select the layer you want over the center all the linked layers should move with the one being aligned.
But I do not know what you mean by a data merge. Do you mean merge down or merge layers.

Can you 'Link Layers' in Illustrator like in Photoshop, or only merge?

I have spent days searching for How to 'link layers' in Illustrator (similar to how you would in Photoshop).
Is this even possible,..? as it appears not.
I can merge layers.. But i only want to LINK to keep the elements separate.
Thanks for any advice,
regards, a newbie.

Ok the default swatches should open with each new document, if that are not doing so then one of two things probably is occurring!
1 you have accidentally opened the default print document deleted the swatches because you probably did not need them for wha you were working on and then did a save and overwrote the default document and now the swatches are gone.
2 You selected a custom made document profile that had now swatches, except the ones you say are there, when creating a new document and that is being defaulted as the next new document,Illustrator remembers the last document setting.

Open as Smart Object as Layers in Photoshop?

I apologize if this has been addressed already, but I am looking for a way to open Smart Objects as LAYERS. I do compositing work and would like to retain as much information as possible by using Smart Objects PRIOR to going into Photoshop. My current workflow is to highlight the photos in Lightroom CC > Open as Smart Object in Photoshop CC > Manually Drag layers from each open file in Photoshop to main PSD.
Edit - Opening as Layers in Photoshop then applying the Camera Raw Filter is not a good work around, information is lost.

davepinminn wrote:
I must still be doing something wrong here..............
You have the wrong expectation—namely because you don't grasp the concept. A smart object is not a linked file. It's a new file all on its own (in PSB format) with no connection to the original file at all.
davepinminn wrote:
…I can open my raw (.dng) into Photoshop as a smart object. And in PS, I can open the smart object into ACR. Works fine. And I can change stuff. For example, if I change the exposure from -.25 to +.20, it changes perfectly in PS, as I'd expect. But, I'm still not getting the changes back to the original raw (.dng) file…
There is no reason why the changes made to a Smart Object oject should be refleftef to a totally unrelated file.
davepinminn wrote:
…Do I need to do something different to get the changes back to the original file…
Yes. you have to go back to that original file and apply the changes directly to it. In a previous post, Jeff Schewe told you of a shortcut to achieve that:
Jeff Schewe wrote:
When you are in the Camera Raw SO with ACR open, go to the main flyout menu and select Export settings to XMP. This will write the new image settings from the SO to the xmp metadata. Then in Lightroom, select Read metadata from file in the main Metadata menu. That will bring in all the settings of the raw SO back into Lightroom. So, while not automatic, it's not as bad as writing down the settings and entering them by hand.

Merging layers in Photoshop Elements 8

I'm having trouble merging layers in photoshop elements 8. I have a .psd file that I have used in the past to add a background color, shape template, and restrict the size of images I have posted to my website. In the past I have used photoshop elements 6, and to accomplish what I'm trying to do I selected open-apple - G. This worked in the past, but is not bringing the layers together as expected. I went online and found that I could accomplish this by holding down option and clicking on the line that seperated the two layers, and this worked for me once and I have been unable to repeat it since. Any idea what I'm doing wrong. I'm trying to apply a style to these web photos, and it's simply not working for me. Thanks in advance for any help you may be able to offer.
- William

Looking at your image, you do know you have a layer set/group,which is like a folder in the layer structure? You can't apply a layer style to a folder, which is what you're trying to do in your screenshot.
This gets very confusing because of adobe's switching the names for these things around:
1. You have what used to be called a layer set and is now called a layer group, which is a folder in the layer structure. PSE doesn't natively do these: is this your image with the group created via an add-on, or did someone send it to you this way?
2. What used to be called layer groups are now called clipping masks. That's when you want to do something like crop the visible part of a layer to the shape of the layer beneath it.
It's not really clear where you want the layer style, why you have a layer group, and which layer you want the style on. If you can explain more, it would help.

Update Modified Content (Linked layers / Smart objects)

Hey guys,
Is there anything in the API for handling the new Linked layers? (CC 14.2)
Specifically, I want to be able to Update Modified Content iteratively to handle lots of nested links.
It doesn't have to be pretty, just functional, as this is a very complicated task to do manually.
Cheers

Crude, but maybe this helps:
// 2014, use it at your own risk;
#target photoshop
if (app.documents.length > 0) {
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID("Dcmn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
var applicationDesc = executeActionGet(ref);
var theXMP = applicationDesc.getString(stringIDToTypeID('XMPMetadataAsUTF8'));
var theFiles = new Array;
var theArray = theXMP.split("<stRef:filePath>");
for (var m = 1; m < theArray.length; m++) {
theFiles.push (theArray[m].slice(6,theArray[m].indexOf("</stRef:filePath>")));
if (theFiles.length > 0) {alert(theFiles.join("\n"))};
Edit: One problem, though: the list in the XMP metadata may not be up to date if the file has not been saved since the last linked SO has been placed or embedded.

Link Layers with One Hand?

Something that's been bugging me about the way Photoshop links layers now is that I have to use two hands. I'm a WAHM, and I often am working with a baby in my lap and only one hand to work both my mouse and keyboard. It used to be that we could simply click on the link icon to link layers to the active layer, but nowadays it's a shift or ctrl+click to do it. Is there a one-handed method to link layers anymore, or am I out of luck until this kid gets older?

Instead of linking, place layers into a group folder. Layers in a group folder will be just as if linked.
Anytime you need to manipulate the layers in a group folder, either select the folder group in the layers palette or grab the move tool. If you use the move tool, check the box beside "Auto-select" and select "Group" in the pull down menu located to the right of the auto-select box.

As a user of Extract, I would like to have the ability to open/access assets and information contained within smart objects or linked layers. Is this possible?

Problem:
In Extract ( Extract for PSD ) a user is unable to access assets or information from smart objects or linked layers.
Usage:
Smart Objects/Linked Layers are useful for templated web workflows
@Sectioning content allows for a holistic view with access to granular information
Possible Solution(s):
Could we create a link between to cloud files.
Could a smart object or linked layer be expanded on upload
Could we create a drop menu like the layer comps that includes related files

Hello Martin,
Our current support in Extract for Smart Objects includes showing them in the file, and using them on the backend when you request your layer(s) to be scaled while exporting (i.e., when scaling up, the highest quality image is used). We also display the colors, fonts and gradients from the included Smart Objects in the Extract Styles panel.
We have considered providing a way to open Smart Objects from within Extract, and could use some feedback from you on how this user experience would work best for you. Would you prefer option a) or b) below, and why?
a) When opening a Smart Object, it opens in the current browser window, replacing your current view of the PSD.
b) When opening a Smart Object, it opens in a new browser window, which receives focus (is the frontmost browser tab/window).
Also, if you tried to open a Linked Smart Object when the linked file is not available, what would you expect to happen?
Would you describe in more detail what you mean by: "Could a smart object or linked layer be expanded on upload?" and how you'd use this feature?
Regards,
brucebowman

Bug: Link Layers via rightclick does not work

Found an issue in Photoshop Version 13.0.1.
This is not a great issue but i think this could be easily fixed by Adobe.
If you want to link multiple layers in an image via rightclick and choose "Link layers..." it doesn't work as expected. But if you issue the link layers command in the layers palette it works. Same problem in 32bit and 64bit Version.
System: Windows 7 x64 SP1
Photoshop-Version: 13.0.1 (x32 and x64)
can anyone also confirm this issue ?

It seems to work here on windows 8 and cs6 13.01 in both the 32 and 64 bit versions of cs6.
That is you select multiple layers and then right click on one of the layer thumbnails to the right of the layer name and choose link layers.
I usually just use the link icon on the bottom of the layers panel for linking/unlinking layers.

Duplicating multiple sets of seperately linked layers results in all layers being linked together

This has been an issue for a while now, I found an old thread from 2011 about the same problem and the mod reported it to the devs, but as far as I know no solution has ever been offered. (maybe in cs6? we are still using cs5)
For one or two layers it's no problem to do it manually, but with say 40 layers with corresponding linked layers we need a better solution.
Does anybody know of a solution? Maybe a script of some kind?

Maybe a script of some kind?
If you are looking for a Script maybe you should ask over at
http://forums.adobe.com/community/photoshop/photoshop_scripting

Linking layers?

hi all. i am so new here it is silly, there is soooo much
info i started with some searches but cannot find anything here nor
on the many tutorials online to solve my issue so here goes.
worth mentioning is that i only dabble in flash so i am not
very good at it.
you can see the flash animation i created at
http://www.aparcamac.com/index.php/1.htm
(in the main content section when the page loads).
i made the background red so you can see the problem.
you will notice the huge red space underneath the animation
where the hands pull back to when they take the laptop off the
dock.
i created the document 530x530 pix but when i give it that
size in the embed, it cuts the external monitor off at the top, no
matter what i do, it leaves a ton of space at the bottom. those
hands that take the macbook pro away should leave the movie scene
well before they actually do now, in other words, the movie seems
to be way too high on the canvas (so to speak). in order to make
the entire external monitor there viewable, i need to make the
embed size 720 high by 530 wide. that allows for more space at the
top but still leaves the space i do not want at the bottom.
my question is can i link the layers in flash so that i can
slide them all down to the bottom and fix this? i cannot find a
link layers tool or option like in photoshop to be able to move the
layers all at once. i need to move them all down 116 pixels in
order to have the movie where it belongs, at the bottom of the
document and hence get rid of that bottom space and be able to
embed at 530x530 pix as it was meant to.
i am sure this is easy for most of you but it is killing me.
short of moving every layer down manually 116 pix. (there are
9 layers and i do not want to mess any of them up by moving them
the wrong amt. of pixels), i do not know what to do.
the document should end where the red background begins.
thanks in advance.
saludos,
jer...

This is something that is a pain in the rear, and I wish
Macromedia/Adobe would have fixed a long time ago. Layer linking so
you can affect all keyframes at once.....
To do this, you need to use Onion Skinning.....
If you don't know onion skinning, it is a method that allows
you to see the previous/next frames content, so you can more
readily change the frame you are on, when animating by hand.
Just a word of warning before you start. This is an extremely
processor intensive process. The more frames you have the slower
your computer will go, and the easier it will be to get the
computer to crash.
At the bottom of the timeline, you have a small row of
buttons. In Flash CS3 the buttons go in the following order:
- Scroll to Playhead
- Onion Skin
- Onion Skin Outlines
- Edit Multiple Frames
- Modify Onion Markers
- Current Frame
- Framerate
- Elapsed Time
I think the layout is a bit different in Flash 8, so hover
over the buttons to get the tooltip that tells you which button it
is.
You need to turn on the second and fourth in that list (Onion
Skin & Edit Multiple Frames) You will notice that handles have
appeared on either side of your playhead.
- Put your playhead on the first frame of your animation.
- Drag the handle on the right side of your playhead the
whole way to the last frame of your animation.
- Put your playhead on the last frame of your animation.
- Drag the handle on the left side of your playhead the whole
way to the first frame of the animation.
This causes Flash to display the content of your entire
animation at once. (This is why it is processor intensive)
Now, select every frame (all layers) on the timeline, which
selects all of the content in the entire project. From there you
can nudge it all down appropriately, and everything will come with
you.
Hope this helps...

Is there anyway to "Link Layers" - Attach formatted Layers so you can move

Photoshop has a feature where you can "link layers" - if you have several things formatted that work together you link them, or combine them, so that when you move one, they all move together. It's an invaluable feature.
Does iWeb have anything similar? It's so frustrating to take all this time to format something and then to have to move something and and you have to move each layer individually and then recreate the careful formatting you worked so hard on.
Thanks!

iWeb is an application to create & manage webpages.
Photoshop is an application to create & edit pictures.
Shift-click to select multiple objects is not iWeb specific. It's been around for the past 25 years. It works on the desktop too.
BTW, here's a movie that shows how to merge objects : [merging objects in iWeb|http://www.wyodor.net/blog/archives/2009/03/entry_122.html]

Selecting, grouping, and linking layers

This question was posted in response to the following article: http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-78d2a

That link doesn't work for me.
I think it's missing .html -- http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-78d2a.h tml
Hey Mike,
Linking layers is similar grouping layers in a sense, but a bit different as well.
So you can have multiple layers retain their relationship to each other as you move them around, or transform them and they will transform together.
Unlink them and they will act separately
One difference of linked layers vs grouped layers is that you can move a linked layer up and down your layers panel, in and out of groups, and still maintain it's link to the other layers which may reside in a group. So that if you select that layer and move it on the canvas, it will still move with the layer it's linked to even though it's outside the group.
You can link multiple groups together as well.

Unable to link layers in Photoshop CS

Similar Messages

Maybe you are looking for