Unable to link to Net Sales pie chart report

I have to display Pie chart based on the selection of Country (drop down list), and state (Drop down list). The display of pie chart (Net sales of particular state)should be based on the state selected. I could able to do the country and state drop down by dashboard prompt and could not able to do the link between state and piechart (Net sales). Please help how to do this.
thanks in advance
chandra kanth

are the columns present in the filter of the report. They should be in the filter to have them in effect. Change the operator to is prompted.

Similar Messages

PIE chart report for planned, Actual and variants cost

Hi Gurus,
Is there any report provides information of Plan cost, Actual cost and Variants cost for sales order or production Plan in PIE CHART format or any other chart diagram.
Regards,
Ram Krishna

Hello,
Go to relevant S_ALR* report.
For example execute
S_ALR_87013611
Settings ==> Options
Office Integration => Microsoft Excel
Remove Worksheet Protection
ignore the warning message.
Go to insert tab on the MS excel.
Select the report data.
Click on pie chart.
You will be able to see the pie chart.
Regards,
Ravi

Dynamic Pie Chart in Smart Form

Hi Frn's ,
How can i show the dynamic Pie chart in Smartform .
Thanks and Regards
Priyank Dixit

Hi,
Refer to this link [How to display pie chart in smart forms|Re: how to display pie chart in smart forms]

Distribution Point Group Status Pie Chart Incorrect

In my SCCM 2012 R2 environment, I have only one Distribution Point Group, which contains all 20 of my DPs.
All packages have been distributed successfully to this DP group (verified via the Content Status node and checking each package, as well as the Distribution Point Configuration Status showing all 20 DPs with the green check-mark.
However, when I look under the Distribution Point Group Status, I see my DP group ("All DPs"), showing 20 members, but an Overall Distribution Status of "Error". The pie chart for that group shows package status as Success: 106
/ In Progress: 0 / Failed: 163. The pie chart for "Distribution Point Group Status" for the "All DPs" group shows the colors appropriate to these (incorrect) numbers. If I click the "View Status" link next to the pie
chart, the different tabs (Success, In Progress, Error, Unknown) show:
Successfully distributed content: 20 (269 Content Items) (last status time: today)
Successfully processed content on distribution point: 19 (263 Content Items) (last status time: yesterday)
Nothing in the In Progress, Error, or Unknown tabs.
So my question... Why is my Distribution Point Group Status showing the group with 163 Failures, but all Distribution Points showing 100% success on all packages? Is there a bug that causes the Distribution Point Group Status to not update?
I've restarted the server a couple of times, and still no change.

Hello all together!
I've the same issue in my SCCM R2 environment.
Has everybody an idea, how to correct this issue?
Thanks for your reply.
Regards Luke

Pie chart question

HI,
I am trying to create a Pie chart report for the first time. How does one go about creating such report? I have looked everywhere, but have found no documentation on Pie charts.
Also, will the following query work in pie chart:
select null,
resolution_type label,
count(resolution_type) value
from ht_issues
where category = 'Help Desk Issue'
group by null, resolution_type
order by resolution_type
Thanks,
Wally

Hi Vitaly,
Yes, my problem is the query reurns a zero in the valur coumn and therefore displays in the chart as 0%
Thanks,
Wally

Pie Chart hide 0% values

Hello,
Currently building a pie chart report to display % based value.
The problem I have is that some value have 0%, which then get drop by CR when generating the Pie Chart, but we need to see them for info.
Is there a way in a Pie Chart to include the 0% value?
Thank
ML

search forum, this has been answered

SVG Pie Chart drill down report

I have created a svg pie chart report within a chart region. the chart contains url drill down.
The urls work fine but it opens the result from the url in the same chart region on the same page.
How can I get it to open on either a new page altogether or on another region on the same page.
Regards
iculhane

How do you get the url drill down to work? Can you explain to me? I have a 3d pie chart, what I want is when I click one of the pieces, it will drill down to a report.
Thanks,
Helen

How to Avoid overlapping data label values in Pie Chart

Hi,
I am facing the problem when the data is more my pie chart data label value is overlapping.
I tried with showing outside the data label value but customer is not accepting ,and i used the CollectedPie option also but still its overlapping .So please any body knows how to resolve this problem as i need very urgent basis.
Regards,
HariKan
HariKan

Hi HariKan,
Per my understanding that the Category group of the pie chart which will retuen many values so that the label will overlapping and you want to know is any method to deal with this kind of problem, right?
In Reporting Services, when enabling data label in par charts, the position for data label only have two options: inside and outside.
In your scenario, I recommend you to increase the size of the pie chart if you insist to choose the lable inside the pie chart as below:
If you choose to "Enable 3D" in the chart area properties and choose to display the label outside, the label's layout will be more clear:
Reference:
Pie Charts (Report Builder and SSRS)
Position Labels in a Chart (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Pie charts

I have a pie chart works great! Its like this: 4 Brands of
Vodka, each has been sold into x number of Accounts for my Vodka
there are a total of 17 Accounts that have gotten sold. In my Pie
Chart there are 4 slices (I have 4 Vodka Brands), Now I know that
the Total number of accounts is 63. How can I take the total number
of accounts (63) and subtract the number of accounts (17) and
display that number (46) as another Slice called "competition". Is
this possible?
Thanks
George

Hi,
We would need more information.
Which Project version are you using? Is it connected to Project Server or in standalone mode?
How did you create your existing pie chart report? Which technology?
Please provide us more details and we'll be pleased to help you.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Adding multiple views to a drill down pie chart

Hi,
I'm currently using OBIEE 10g and have a problem when drilling down on a pie chart.
I have a dashboard named spending analytics and it shows in a pie chart, spending by different categories (airlines, automotive, etc).
When i click on the Airlines slice of the whole pie chart i drill down to a pie chart with the spending from different airlines (American, United, etc)
However, I want to have another level of drill down where i can choose an option as speding by state as well. So, spending by state should be part of the airlines.
Then i should have Total Spending by category(airline) > Spending by type(United) > Spending by state(PA,DC, etc)
How can this be done?

Hi User,
Drill Down from Pie chart can be done.
Create a Pie chart report intially, add the same to compound layout.
Now, edit the pie chart.
You can view, Additional charting options icon. Click on it.
Now click on 3rd tab -> Interaction.
Select Navigate.
Add Navigation Target. Here, Browse the detail report and add the caption.
Here, you can add as many detail reports as you like.
I have created the same and added 3 different detail reports. It worked for me. Even, i used 10g.
I hope the same with you.
Award some points if it helps you and resolves your issue :)
Close the thread.

How do I link to a table from a slice of a pie chart?

My project manager is after me to add a feature to a pie chart built on one of my tables. The code that selects from the table for the pie chart is this:
select 'http://apexdevapp1.ci.raleigh.nc.us:7777',activity_type,count(ID) total FROM eba_ver2_cust_activity
where ACTIVITY_DATE BETWEEN NVL(TRIM(:P23_START_DATE), '01-JAN-2001') AND NVL(TRIM(:P23_END_DATE),
'31-DEC-2099')
group by activity_type,'http://apexdevapp1.ci.raleigh.nc.us:7777';
She wants to be able to click on a slice of the pie ("activity_type") and link to another page showing a report limited to that activity_type, selected from the same table. I know how to link from one interactive report to another, but I don't know how to do it from a slice of a pie chart. Does anybody know how?
I'd appreciate some guidance on this.
Steve the n00b in Raleigh NC

Denes Kubicek wrote:
Have you compared that link with any of your apex application links in the browser? ;) :)
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------I may be missing the point of your question, Denes, but all my links are implemented from the Link Column section under Report Attributes. They are not mentioned anywhere in the Select statement, unlike yours.
Steve "the n00b" in Raleigh NC

Is there any way to link the individual rows of data to the corresponding bars in a bar chart so that each legend title appears simultaneously with its corresponding bar when creating a build? I can do it in a pie chart but can't in a bar chart.

Is there any way to link the individual rows of data to the corresponding bars in a bar chart so that each legend title appears simultaneously with its corresponding bar when creating a build? I can do it in a pie chart but can't in a bar chart.

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Linking Pie Chart & Table to Bubble Chart Values

Hi All,
I am new to Xcelsius and I have an issue with my drilldown.
I have a Combo Box and choose Plants from this and my Bubble Chart updates according to the value in combo box.
Now I want to hover over the 'bubble' and want a Pie Chart and Table to reflect the values from that bubble. The value in the Bubble is a total and I want the Pie Chart and Table to be splits of this total - eg. Total of 50 employees but want the Pie Chart and Table to reflect splits per team.
I know the Destination Values from the Bubble Chart should be in the Pie Chart and the Drilldown should be enabled. However, the values that I want to show in the Pie Chart are different eg. Bubble Chart will say 50 but in the Pie Chart I want to see 5 segments of 10 - 50. ie. the Total of 50 split into the appropriate 5 teams. How do I create this linkage/drilldown where it takes the 50 and when I hover over this bubble, the Pie Chart shows the team split by looking up a different set of data. Have tried adding this into the drilldown area in the Pie Chart, where the source data is the split and the destination data is another area to pick up this data.
Any advice would be much appreciated.
Thanks,
Scott

Hi Maddy,
Thanks for the reply.
My scenario is :
In the Combo Box, you choose an Industry.
From each industry there are 4 values.
Industry      Employees     Int FTE     Ext FTE     Total FTE
Education     5000          5     8     13
Retail          40000          15     18     33 etc.
When I choose Education from the Combo Box, in the Bubble Chart I want to see a bubble for Education at the point of 5000 (X-axis) and 13 (Y-axis). This works fine.
I now want to hover over the Education u2018bubbleu2019 and the Pie Chart will show a split between Int FTE & Ext FTE u2013 ie. 5 & 8. I have added the relevant details to the drilldown and I still can't get this to work.
Also by hovering over the bubble, I want a table to change too, that shows a breakdown of what teams the Int FTE & Ext FTE is made up from and how many employees are in each team. This data is picked up from a different destination and I not sure how we link this to the data above.
Hope this helps.
Scott

Pie Chart - Have no link and stop cursor from changing.

Hi,
I have a simple pie chart (flash) with the query:
select
     NULL link,
     rag.meaning,
     count(wp_id)
from ......
For this particular chart I do no want a link from the pie chart to another page so I have defined the link as NULL. This works OK and clicking the chart does nothing (as expected).
Unfortunately the cursor still changes from the normal arrow to a pointing finger (as it does for any other hyperlink) which may confuse the user into thinking they should be able to click here and drill down.
How can I stop the link from existing entirely?
Many thanks,
Martin

Bump

Creating a SVG Pie Chart With Different Portion Linking To Different URL

Is it possible to create a SVG pie chart in which different portion will point to different URL. on HTML DB version 1.5.1.00.12
For example i've tried something like this:
on page 20 i have a svg pie chart
select
'f?p=&APP_ID.:21:#APP_SESSION#::::P21_DD_SALESORG:'||region,region,code from demo_region;
i have a query in page 21 like this:
select country from demo_country where region= :P21_DD_SALESORG;
so when i click on a particular region on the pie chart on page 20 the value of item
P21_DD_SALESORG on 21 should be set.
but the value of P21_DD_SALESORG is always getting passed as NULL from the pie chart.
I've tried it on HTML DB version 1.5.1.00.12
Look for an early reply
Thanks & Regards,
Rupak
Message was edited by:
user445907

hi user445907--
your link column in your chart query seems to us the correct syntax, so i'd imagine the issue is with your data/query or the item name in question...
check the query and data: make sure your query returns valid values to be passed of to P21_DD_SALESORG. if so, you should see your links correctly formed as you hover your mouse over the individual slices. if your links look good then check your item names.
item names: if your links above look okay, then might you be setting the value of the incorrect item? please confirm that. after clicking a pie slice to get to page 21, check to see that P21_DD_SALESORG is correctly set by clicking the Session link in the developer toolbar.
basically, i'm suggesting that because your link column in your query looks okay, you'd want to see at what point the NULL value is being passed/set. try tracing things from the chart query over to page 21 (and try going backwards if you have to). if you can't find the disconnect, please feel free to set up an example on an instance, where i can take a look.
thanks,
raj

Unable to link to Net Sales pie chart report

Similar Messages

Maybe you are looking for