Unable to listen to music on 4s through aux input after ios7 update

I can no longer listen to my phone using my aux input
In my car. It worked yeasterday before the upgrade
But doesn't work today. Please help

I have this same issue but with iPhone 4. Would not play via USB or Bluetooth. I own 2013 Toyota Corolla. When I plug via USB my car audio display lets me select folders and music through browse but when I select a song I get an error on the car audio display that says "read manual or contact dealership for information on how to connect". This did not happen prior to ios 7 update on my iPhone 4.

Similar Messages

  • Unable to listen to music while iPod is connected to computer

    Whenever I connect the iPod(5th Gen) to my computer it shows Do Not Disconnect message and am unable to listen to music. Also, if music is playing previously, it stops automatically. Can anyone help? Just been two days since I bought my iPod

    Try this for your Do Not Disconnect issue:
    Connect your iPod and in iTunes go to Preferences>iPod. Under the Music tab see if you have your iPod set to automatically sync with iTunes and also have a tick in the box marked “enable disk use". Remove this tick and your iPod should automatically disconnect after it’s finished updating.
    If you have your iPod set to manual update, the box will be greyed out and ticked by default, in that case use Safely remove Hardware icon or check this link: "Disconnecting iPod from your computer
    " http://docs.info.apple.com/article.html?artnum=61135
    Just another point to note, your iPod needs to be in manual mode to listen to it while connected to your PC. In automatic mode you will see the iPod library greyed out and inaccessible.

  • Screen says "Unable to listen to music; low battery" & won't charge?

    My niece just called me with a problem I could not find a solution to doing a search.
    She said she was listening to a song when her Nano stopped playing. When she looked at the screen, it said "You Can't play music, your battery is dead". It appeared for about a minute, then disappeared.
    She plugged it in via the A/C wall adaptor, but the charging icon is not showing on the screen.
    I told her to attempt a restart, but nothing happened. I asked if she attempted to charge it using the computer. That had also been tried before contacting me, and no icons appeared then either. Initially, my thinking was that it would need to be connected to the charger for a while before it had enough energy to show anything, but she said that it's been connected to the wall charger for over 3 hours now and that's why she decided to call me. Unfortunatley, we live a few thousand miles apart, so I can't run over and see it. And yes - I did have her check the hold button & that's not on either (see; I read these boards & do searches when I have questions! LOL)
    Any ideas are greatly appreciated, as I'm at a complete loss. I have never heard of an iPod, Nano or regular, displaying such an interested message (I asked over 3 different times, and each time she repeated the same thing - unable/can't listen to music, low battery - then died).
    Hopefully, someone can answer so I can regain my iPod Goddess status in her eyes =) I was floored when I did a discussion search and couldn't find the answer!
    THX!
      Windows XP   First Time Mommy to 4gen 60gb

    Hi Menhem,
    It is unfortunate that the automatic calibration didn't complete.  I would recommend going ahead and trying the Manual Calibration steps at the end of the document Testing and Calibrating the Battery (Windows 7), then go back to using the notebook as you normally would and see if the behaviour of the battery and charging system changes at all, you could also run the battery test again to see if you get a different result.  If it improves great, but if there are still problems, try the automatic calibration one more time to see if it will complete.
    Another thing to do is to make sure you are up to date with your BIOS, the latest BIOS for your model is F.52, which you can find at the link below, but it is relatively old at this point, so I would thing that you probably already have it on your PC.  In general I would recommend running the HP Support Assistant application, and letting it check your PC and keep it up to date with all the necessary drivers.
    How long have you had the notebook?  Batteries do degrade over time with normal usage, and if you have had the notebook for awhile, and have put the battery through many charging cycles, it may just be time for a new battery.  Check out Purchasing a Replacement Battery for instructions on finding a replacement battery.  Some other documents to review are Improving Battery Performance (Windows 8, 7, Vista) and Understanding Lithium-Ion and Smart Battery Technology, both of which may have some good information to help you with your issue.
    R
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • Unable to listen to music on xa-0611

    Hi,have an O2 XA-0611 headset which Ican use for calls but can't listen to music.I can use the headset to play or pause forward or rewind but no sound comes through.
    Is there something Ineed to change in settings?.Headset is supposed to be compatible with iphone.Thanks.

    Well ****. I guess it's my turn to experience this. Yep. 120GB iPod Classic. All of a sudden, "no music." But it's all there, according to the settings. Please, oh please, Apple. We need help. I can't deal with losing all this precious music. I have a lot of it backed up in various places, but it would be impossible to get it ALL back, and it would be an incredible long and challenging process to retrieve what is retrievable.
    I'm too busy for this. Please give us an easy fix, please!

  • My MacAir purchased Sept 2011 gets exceptionally hot after charging for 10 minutes when the fan comes on. This also happens if I'm listening to music or watching something on YouTube after a few minutes. The machine gets hot and the fan comes on.

    My Mac Air purchased in Sept 2011 gets exceptionally hot after only 10 minutes of charging with the fan coming on. This also happens if I'm listening to music, watching a video, or doing an online crossword puzzle. When I shut it down the fan continues for a few minutes before shutting down. I took it in to the Genius Bar and they claimed the heat was within specifications.. I've owned several Macs and Mac iBooks in the past and this has never happened before.. Has anyone else had this same problem or have heard of it?

    Hi...
    It should not get that hot under 'normal' use.
    First try a SMC reset.
    Also note that it's a known issue that when attaching the magsafe connector and then within a few seconds opening the lid or in reverse, it can heat up for no aparent reason. Closing and reopening the lid should solve that.
    A workaround for this is to wait ca. 15-30 sec. after opening the lid, before connecting the magsafe.
    /Dennis

  • Music player bug on iPhone 5 after iOS7.1.1 update

    Good day everyone,
    There are over 30,000 discussions here so i would like to post this report. after i updated my iphone5 to ios 7.1.1 i have been experiencing a bug with the music player. the bug is when i started to play a playlist and tried to select other song within the playlist while a music is running, my action give a next command instead of playing the music that i selected.
    i hope for your quick resolution.
    thank you..

    I think all you need to do is Reset your iPhone (press and hold the Home and Sleep/Wake buttons until you see the Apple logo, then release).  My iPhone 5 on 7.1.1 does not do this, so it is not an iOS bug, just a quirk in your particular installation.  Worse case, you may need to do a Restore of the iPhone, but try Reset first.

  • Music buttons not working in lock screen on my iPhone 4 after iOS7 update.

    After I updated my iPhone 4 to iOS7, the music buttons like PLAY, REWIND and FORWARD are not working in the locked screen as well as on swipe up menu. Any resolution please?

    hi there
    i had a problem with my wifes iphone 4s, today morning while travelling to work i changed a setting on repeat option and changed it to repeat artist, it was fine until when i finish my work and on my way back i found songs are not playing anymore, lots of stop signs next to my song list, play/pause button not working, album arkwork keep moving from one to another on its own, so after i reach home i try to do some research on Apple support communities, try to soft reset my phone closing all the apps on background didnt work, also note that control centre music player was not working as well. none of the solutions worked. after trying for two hours i found out that the trouble is in repeat options , so i changed it from repeat artist to repeat off. and the music start playing as usual, but i still have those stop buttons next to the songs i tried to play earlier. At least it fixed temporarily. please also note that in the meantime i tried to sync my phone with the pc and suddenly its start syncing all the songs again assuming there were no songs on my iphone.  so guys i think soft reset might not help all the time but try to remember what settings you changed recently and change it back to the original option, not sure ,but it might help.

  • I recently used Bluetooth speaker with my iPhone 4S  Now I  am unable to listen to music through headphones Iphone speakers, even when device is no longer recognised by phone.

    Please advise

    Hey Jennymagee,
    Thanks for the question. I understand you are experiencing issues with your iPhone 4s. The following resource may provide a solution:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    1. Verify that the volume is set to a level you would normally be able to hear.
    2. Ensure that there is nothing plugged in to the headset jack or the dock connector.
    3. If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    4. Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    5. If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    6. If the iPhone is paired with a Bluetooth headset or car kit:
              - Try turning off Bluetooth.
              - If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    7. Restart the iPhone.
    8. If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    9. If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    If the issue persists, please follow the last step by contacting Apple Support for support and service options.
    Thanks,
    Matt M.

  • Unable to listen to music (sometimes)

    I have a laptop with a wlan connection and all my mp3 music on a network drive. i have imported some of my cd's from my network drive to my itunes. When I take my laptop on the go, I can't access those songs. And when I get back and resync my Ipod i get the message stating that it could not find those songs and I have to go back every single time and show it were it is. It's not on all the songs, just a couple. I have other songs on Itunes from the same drive and don't have that problem

    Try this for your Do Not Disconnect issue:
    Connect your iPod and in iTunes go to Preferences>iPod. Under the Music tab see if you have your iPod set to automatically sync with iTunes and also have a tick in the box marked “enable disk use". Remove this tick and your iPod should automatically disconnect after it’s finished updating.
    If you have your iPod set to manual update, the box will be greyed out and ticked by default, in that case use Safely remove Hardware icon or check this link: "Disconnecting iPod from your computer
    " http://docs.info.apple.com/article.html?artnum=61135
    Just another point to note, your iPod needs to be in manual mode to listen to it while connected to your PC. In automatic mode you will see the iPod library greyed out and inaccessible.

  • Ipod on Iphone 4: unable to listen to music on speakers

    While playing my music, IPOD, on my iphone 4, sound is not coming through speakers on phone. The volume control is not even shown, unless airport express is selected.
    If I am in my car, and the blue tooth, hands free device is on, the music will play though the hands-free device.
    I have upgraded to version 4.3, but a friend who also upgraded is not having the same issue.
    Any assistance is appreciated.

    Hi,
    Try turning off Bluetooth on the iPhone.
    Tap Settings / General / Bluetooth
    You may need to restart the iPhone for changes to take effect.
    Carolyn

  • Unable to listen to music because my ipod says there is none.

    everytime i unplug my ipod from my computer after letting it put all my music and stuff back on it, it always says in my settings that there are 0 songs and videos why is that so? i am sick of seeing this every **** time it really ****** me off

    Providing they play OK in iTunes on the computer
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Manage Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    Note the delete is only for later iOS versions.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
      - Restore to factory settings/new iOS device.                       

  • My ringer does not work on my phone (not sure what happened, didn't smash it, nor did it fall to the ground), and I have been on silent/vibrate mode for a few months now. Unfortunately I am unable to listen to music without headphones, or get on speaker.

    I can hear sounds when I plug in to headphones or on bluetooth (streaming audio from my car).
    Can anyone help?
    I have the iphone 4s.
    Thank you!

    Hey Chris,
    Unfortunately the ringer does not work - which causes the speaker to not work when it's switched on to ring mode, unless I'm on bluetooth. It has recently stopped working and I've had this phone for 2 years.

  • Has anyone had issues with their iphone not being able to play music through ihome or other external units after ios7 update?

    I have not been able to play music or podcasts when my phone is plugged into my iHome. It did so before the iOS update. It does the same thing with my JBL at work.

    Yes with some docks and car systems but I do not remember the specific devices. Sometimes and iOS update breaks compatibility.
    Try:
    - Go to the dock manufacturers and see what they say. Also see if there is a firmware available for the dock
    - Reset the dock
    - Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
      - Restore to factory settings/new iOS device.

  • IPod Music and Album Art gone haywire after restore/updates/sync

    First post !
    Since my PC (Win7Pro 64bit) had SP1 installed, iPod Touch (2G) is going nuts. Sent to Apple - latest OS and iTunes (64bit)installed and all OK they said - but now when syncing from iTunes,Album Artwork is gobble-de-gook and some music jumps to next song part way (1/2) through playing. Some tracks have wrong names and some have no artwork at all.
    Have restored (as per Apple Cust.Support) and tried to resync but still all over the place. Still under warranty but they found no fault at Service.
    Easy to blame M/Soft but every other thing attached works fine (Nokia,Samsung,Logitech, etc.) Any ideas or help would be appreciated. Thankyou.

    did you ever find a resolution to this? i have almost the same issue on my iPhone. thanks

  • Why is my music no longer playing on my phone after iOS7 update?

    I updated my phone to iOS7 (yay!) but now the majority of my music will not play on my my phone.  The music plays on my computer just fine, but doesn't appear to sync to my phone now.  This is how my 32 gig phone now appears on iTunes:
    It's filled to the correct levels... but says I have half of my phone free.  Which I don't.
    Anyone know how to fix this?
    Thanks,
    Susie

    I just found this and it seems to be working.
    ChrisJ4203 said "Is the Apple ID you are signed into the phone with the same as the Apple ID the music is with in iTunes? Can you try and sign out by going to Settings>iTunes and App Stores. Click on your Apple ID, select Sign out. Do a reset on the phone holding the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, then go back there and sign back in again. See if that helps."
    Seems to work! I actually have two different apple accounts for my phone and for my iTunes (when I got my phone the guy did not tell me how important it was to have one account!)
    So this may be the case for many people!

Maybe you are looking for

  • Invoice document missing in MCSI report

    Hi Friends, This is regarding missing invoice documents in MCSI report in our production system. it was found that two invoice document numbers for a customer were missing where as these two documents are being displayed in BW report. I have checked

  • HP LaserJet Pro 400 m401a Go offline after restart the pc

    i just buy a new HP Laserjet Pro 400 m401a and i install the drivers from the dvd that i found with the printer but after i finish and shut down the computer i found the printer offline i try to remove the usb cable but nothing i install the driver a

  • Adding 1 PDF to many seperate PDFs

    I've been trying to figure out a way to take one PDF (a title page) and adding it to many different PDFs. I would prefer to not do this manually because at my company we're changing things all of the time. Is there any way to just apply my title page

  • Can a process can have more than one variant?

    Hello Gurus, I've understood that, in a Process Chain, The variant holds the specific configuration information for a process. My doubt is, can a process can have more than one variant? Please explain with scenarios, examples etc. It’s my pleasure to

  • Audio Hardware issues with premiere pro cc

    I'm having some trouble enabling my usb mic.  Whenever I try to click the "enable track for recording button" in the audio track mixer I'm met with a message that states that I cannot record without adding a valid input device.  So I do preferences >