Unable to load bluetooth device driver to xfer files

On W500 and T61P attempt to connect a Samsung SGH T809 phone using bluetooth. Device is seen at both PC and phone using bluetooth. Win 7 OS. When it connects it loads the Modem, and other device drivers but fails to load one of the peripheral device drivers. Windows Update fails to find missing driver. Help says incompatible with level of Operating System.
Went to Lenovo site and downloaded latest bluetooth drivers. All but one of them load. Not able to do any file transfers from the phone although did send an image file (jpeg) to the phone. Could not find it after it was sent. Seems to be a PC and not a phone problem. What gives?

I'm having the same problem on my W500 running Win 7 Pro/64-bit.. I have also updated the drivers per the Lenovo support site. My PC recognizes my Apple iphone 5 have successfully paired them, but we have the dreaded yellow exclamation flag reflecting the fact that there are no drivers for file transfer (shows also in Device Manager). Able to play music from iphone to PC, but not able to transfer files.
This also happens when I attempt to pair with another bluetooth equipped PC, so obviously the problem is not with the phone. Trouble shooter shows "The driver for VOB instantDrive Controller is not installed"
Any suggesstions? Is this simply an unsupported feature?

Similar Messages

Unable to load HP printer driver-Error message!

Hi,
Just wondering if anyone can be of any assistance.
I recently purchased a HP Photosmart 2575 all-in-one printer and installed the necessary software, which said it was successfully installed. However, whenever I boot up the G3 I keep getting the following message 'Unable to load the printer drive, open the applications Get Info dialog and increase the preferred memory size. If this does not help try quitting all other applications or reinstalling the printer software.'
After clicking ok on this message about four times the message goes and I am able to print fine. Just wondering why this is happening. I have increased the memory allocation and also turnt on the virtual memory to see if this makes any difference, but all to no avail. I have also uninstalled and then reinstalled the software to see if this makes a difference, but that didn't help either.
Any help would be greatly appreciated.
Thanks in advance
PS: The printer is connected via ethernet on my router to enable me to print from another machine

Use Techtool Lite or Trash*Desktop (TD may delete Finder comments )to rebuild your desktop w/extensions off. Does a better job than manually & you avoid all the finger gymnatics. You just have to hold down the shift key to shut off extensions.
Restart to turn the extensions back on again.
If you want to rebuild manually, see KB article http://docs.info.apple.com/article.html?artnum=10182 Rebuilding Desktop File and Icon Recovery.

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver I have the message that it is already up to date.
I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

Hi juigarashi,
Microsofts automated troubleshooting service on the link below may help
CD/DVD Repair
Hope it works for you.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How can i load the device driver for my ipod nano 7th generation

When I plug in my ipod nano 7th generation (for the first time), I am getting a message about "unknown device" and "driver not installed properly". Can I manually load the device driver some other way?

Hi there Jen292,
You may find the troubleshooting steps in the article below helpful.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W.

Equium - Windows can't load the device driver for USB dongle

I have been using a dongle without problems for about a month, however now it is saying (in device manager ) "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
what does this mean and how can i fix it?

hi it's a vodafone 3gb cheap as chips dongle
it's an equium a200 i think
everything cam as one on the dongle, it uninstalled ok after initial problem, but now won't acknowledge it is in fact a dongle, just a 'usb mass filter' something or other?
i know i sound completely stupid, but when it comes to technology i am!

Unable to load time source driver sntp

Hi ,
I added sntp client script in ni-rt.ini file. but i am getting the following error. Do i have to install something. if sowhat is the driver needs to be installed.
"unable to load time source driver"
thank you,
Ranjith

Hi,
I need to sync RT PXI chassis time with remotely located unix PC which is running NTP server.
Any help would be appriciated.
Ranjith

My computer will not load the device drive for my ipone 5. I have uninstalled, reinstalled itunes

my computer will not load the device driver for my ipone 5. I have uninstalled, reinstalled itunes; i have restarted phone; disabled startup devices for windows 7; restarted my computer; Please help- very frustrated

Device not recognized
http://support.apple.com/kb/TS1538
Note: You should only sync to one computer

Satellite P750: Unable to install Bluetooth Stack driver on Windows 7 (x64)

Hello.
I own a *Satellite P750-02T* (Part no. *PSAY3A-02T001*).
In the order what I did:
1) I formatted its HDD and reinstalled OS to *Windows 7 x64 Ultimate SP1*.
Then I downloaded *ONLY BIOS and the drivers* from [its Downloads page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] :
2) I updated its BIOS to *v1.90* (the laptop came with v1.80)
3) I installed all the drivers:
- both LAN and WiFi
- Intel Chipset (latest available)
- all video drivers (Intel HD Graphics, NVIDIA Graphics, and Intel HDMI)
- Card Reader
- Realtek HD Audio (latest)
- Synaptics Touchpad
- USB3.0
- IR
- TV-Tuner
However, I'm *unable to install the Bluetooth driver (v8.00.06(T)* )...
When I run setup from the [above-mentioned page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it partially detects *'Bluetooth USB Controller-10 from TOSHIBA'* (USB\VID_0930&PID_0215&REV_001)
and then installation simply freezes displaying +'Installing the Bluetooth Driver. Please wait+.' and stays like that forever...
I also tried downloading a driver from [another location|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for TOSHIBA notebooks - v8.00.02(T):
and followed installation instructions displayed under 'Details'
but there was the same outcome - the setup simply freezes...
Installing Hotfix (*KB978258*) recommended there didn't work either - the message '+The update is not applicable to your computer+' pops up.
And I understand why - this Hotfix is [already included|http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] into Service Pack 1 for MS Windows 7.
I spent hours searching on the Internet for a solution. Although there were some similar cases none of the recommendations actually worked. I tried installing:
- WiFi driver before installing Bluetooth (someone suggested that those two are the parts of the same card);
- resuming installation in Safe Mode;
- *Toshiba Value Added Package* hoping those tools somehow will kick in.
Nothing worked...
It's interesting that when for the sake of experiment I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything run smoothly!
*Using Bluetooth connection on this laptop is very crucial for me.*
I hope I shall not have to return this wonderful notebook as I know TOSHIBA is one of the best manufactures and am sure there is a solution to this problem.
Thank you very much.
Evgeny.
Message was edited by: CVD
clarified about using another generic Bluetooth adapter with non-TOSHIBA driver

For FN functionality you must install Toshba Value added package. Toshiba flash cards utility is part of this package.
I dont know if P750 has WLAN switch but before you start BT installation be sure WLAN LED is ON.
BTW here is installation order for Win7 on Satellite P750 (European but the same order must be for your Australian model):
Win7 64bit SP1
PatchFiles V1.0
PlayReady PC Runtime V1.3
Sun Java2 Runtime Environment 1.6.0_20
TOSHIBA Assist 4.02.02
TOSHIBA Bulletin Board 2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Chipset SW Installation Utility 9.2.0.1015
Intel Management Engine Interface V7.0.4.1197
Intel Display Driver 8.15.10.2353
NVIDIA Display Driver 267.44
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Supervisor Password Utility 1.63.51.2C
TOSHIBA HW Setup Utility 1.63.1.34C
TOSHIBA Flash Cards Support Utility 1.63.0.12
TOSHIBA Value Added Package 1.5.4.64
NVIDIA HD Audio Driver 1.1.13.1
Realtek Audio Driver 6.0.1.6305
TOSHIBA Wireless LAN Indicator 1.0.3
Intel Wireless LAN Driver
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA HDD Protection 2.2.1.13
Atheros Bluetooth Filter Driver Package v1.0.4
Bluetooth Stack for Windows by Toshiba v8.00.06(T)
Realtek LAN Driver 7.038.0113.2011
Jmicron Card Reader 1.00.57.02
ENE CIR Driver V3.2
YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
USB3.0 Driver 2.0.34.0
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition 3.1.9
TOSHIBA eco Utility 1.2.24.64
Intel Proset 14.0.2.0.1.s64_wCAT
TOSHIBA HDD/SSD Alert 3.1.64.8
TOSHIBA Service Station 2.1.52
HDMI Control Manager 2.0.0.7.64
TOSHIBA Remote Control Manager 3.0.6.1
TOSHIBA PC Health Monitor 1.7.5.64
ConfigFree
TOSHIBA Web Camera Application
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
Intel Wireless Display 2.0.29T2
PatchFiles PCIIDEREG-1.2
PatchFiles
I hope this will help you a bit.

Bluetooth device driver - Windows 7

I am unable to successfully add my Blackberry 9700 as a bluetooth device paired to my Windows 7 64 bit laptop in order to use the wireless syncing function. When I attempt to pair the device, I receive the error message "device driver was not successfully installed" and "Bluetooth peripheral device- no driver found." The properties display 2 missing drivers. Can someone advise me from where I can obtain these missing drivers. I am using Desktop Manager 5.0.1.28. Thanks

Go to the site for directions. You have to add the drivers manually.
http://www.technospot.net/blogs/how-to-fix-bluetooth-peripheral-missing-driver-blackberry-windows-7/

Unable to load my sql driver

So frustrated to see my servlet cant connect to mysql database, anyone pls help me?
i put mysql-connector-java-2.0.14-bin.jar in
C:\Apache\Tomcat 4.0\common\lib
C:\Apache\Tomcat 4.0\webapps\ROOT\WEB-INF\lib
D:\j2sdk1.4.0_03\jre\lib\ext
here the exception:
javax.servlet.ServletException: Unable to load driver
     at FormHandlerServlet.init(FormHandlerServlet.java:27)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:918)
     at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:655)
     at org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:400)
     at org.apache.catalina.servlets.InvokerServlet.doPost(InvokerServlet.java:216)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2347)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1027)
     at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1125)
     at java.lang.Thread.run(Thread.java:536)
here is my servlet:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.sql.*;
import java.sql.Date;
public class FormHandlerServlet extends HttpServlet{
private static final String driver="com.mysql.jdbc.driver";
private static final String dbURL= "jdbc:mysql://localhost/aos";
private static final String login= "aos";
private static final String password= "aos";
private ServletContext context;
private Connection conn= null;
private Statement stmt= null;
public void init(ServletConfig config) throws ServletException{
     super.init(config);
     context= config.getServletContext();
     try{
     Class.forName(driver);
     conn= DriverManager.getConnection(dbURL, login, password);
     stmt= conn.createStatement();
     catch(ClassNotFoundException e){
     System.err.println("Unable to load driver");
     throw new ServletException("Unable to load driver");
     catch(SQLException e){
     System.err.println("Unable to connect to database");
     throw new ServletException("Unable to connect to database");
public void service(HttpServletRequest req,
          HttpServletResponse res)
     throws ServletException, IOException{
     Vector errors= new Vector();
     Calendar startCalendarDate = Calendar.getInstance(TimeZone.getDefault());
     java.util.Date startUtilDate = new java.util.Date();
     long startLongDate = startCalendarDate.getTime().getTime();
     java.sql.Date startSqlDate = new java.sql.Date(startLongDate);
     String userID= req.getParameter("userID");
     String password1= req.getParameter("password1");
     String password2= req.getParameter("password2");
     String name= req.getParameter("name");
     String ic= req.getParameter("ic");
     String status= req.getParameter("status");
     String gender= req.getParameter("gender");
     String department= req.getParameter("department");
     String email= req.getParameter("email");
     String phone=req.getParameter("phone");
     if(!isRequiredData(userID, password1, password2, status))
     errors.add("Sila isikan semua data yang diperlukan dimana *.");
     else{
     try{
     if(isExistedUser(userID))
errors.add("No Matriks/Pekerja anda sudah wujud, Sila cuba lagi.");
     catch(SQLException e){}
     if(!isSamePassword(password1,password2))
     errors.add("Sila isikan password1 dan password2 yang sama.");
     if(!isValidPassword(password1,password2))
     errors.add("Sila isikan password anda dalam 8-12 perkataan.");
     if(!isValidEmail(email))
     errors.add("Sila pastikan " +"@"+" dalam e-mel anda.");
     if(!isValidPhone(phone))
     errors.add("Sila pastikan "+ "-"+" tidak dalam nombor telefon anda.");
     if(!isValidUserID(userID))
     errors.add("Nombor Matriks/Pekerja anda tidak mengandungi 6 perkataan.");
     String next;
     String password= password1;
     String insert= "insert into user values('"+userID+"', '"+password+"','"+
     name+"', '"+ic+"', '"+status+"', '"+gender+"','"+
     department+"', '"+email+"', '"+phone+"', '"+startSqlDate+"')";
     if (errors.size() ==0){
     //data is ok, insert data to database, dispatch to wherever
     try{
          int x= stmt.executeUpdate(insert);
     catch(SQLException e){}
     next= "/aos/thanks.jsp";
     else{
     //data has errors, try again
     String[] errorArray= (String[])errors.toArray(new String[0]);
     req.setAttribute("errors", errorArray);
     next= "/aos/RegisterForm.jsp";
     RequestDispatcher rd;
     rd= context.getRequestDispatcher(next);
     rd.forward(req, res);
public boolean isSamePassword(String password1,String password2){
     //check for both password is same
     return(password1.equals(password2));
public boolean isValidPassword(String password1,String password2){
     //check for both password is under 8-12 char
     return(password1.length()>=8 && password1.length()<=12 &&
     password2.length()>=8 && password2.length()<=12);
public boolean isValidPhone(String phone){
     //check for no dashes
     return(phone.indexOf("-")==-1);
public boolean isValidEmail(String email){
     //check an "@" somewhere after 1st char
     return(email.indexOf("@")>0);
public boolean isValidUserID(String userID){
     //check for userID is 6 char
     return(userID.length()==6);
public boolean isRequiredData(String userID,
String password1, String password2, String status){
//check for required data is filled
     return(userID.length()!=0 && password1.length()!=0 &&
     password2.length()!=0 && status.length()!=0);
public boolean isExistedUser(String userID) throws SQLException{
String sql= "select * from user where id= '"+userID+"'";
ResultSet rs= stmt.executeQuery(sql);
     if(rs.next())
return true;
     else
     return false;


is the driver name correct?
private static final String driver="com.mysql.jdbc.driver";
I usually have another string, but I might use a different mysql driver. Try opening your mysql driver with winzip and see if the class is there and at the defined directory place

Iphone bluetooth device driver for windows 7 os

My laptop says it cannot connect via bluetooth because it doesn't have the the device driver for my windows 7 os - can someone point me to it as I am having difficulty finding it - thanks

what are you trying to do?
the only thing windows can use an iphone for bluetoothwise is
teething it's internet connection (it being the iphone)

Unable to load the jdc driver

Hi,
I am using mckoi, but I don't succed in loading the jdbc driver:
Class.forName("com.mckoi.JDBCDriver");This line throw a ClassNotFoundException. But:
cd $CLASSPATH; ls | grep mkjdbc.jar
mkjdbc.jar
So the jar file is in the CLASSPATH.
I try also:
import com.mckoi.JDBCDriver;But when it compile:
javac ConnectToServerDemo.java
ConnectToServerDemo.java:2: package com.mckoi does not exist
import com.mckoi.JDBCDriver;
Something strange:
java -cp mckoidb.jar com.mckoi.tools.JDBCQueryTool -u "admin_user" -p "aupass00"
It's work very well !
I don't understand and I have no idea.
It will be fine if someone can help me.

You should follow duffymo's advice and explicitly pass classpath on the command line.
However, classpath environment variable can work. It appears you have the directory in which the jar file resides in the classpath. Java won't find JARs automatically, you have to include the name of the JAR file explicitly.
E.g., if your jar is located in "/mydir" and your classpath environment variable contains an entry "/mydir" change it to "/mydir/mckoidb.jar", or better yet add that in addition to "/mydir" so classes are also found.
Tim

Unable to load impl class error after WAR file rebuilt

Hi
I have the source code for a working WAR file. I wanted to make a small change to the code and rebuilt the WAR. Now the previous WAR version works but even when I rebuild the WAR from the unedited code I get the error "unable to load impl class"
and ClassNotFoundException: Class bytes found but defineClass() failed for ...
Does anyone know what kind of changes in my environment would cause this problem?
Thanks
J Armstrong

This was caused by using jdk1.6.0_02 to compile the java files where jdk1.50_06 was required

IPad unable to recognize bluetooth device after "forgetting" device.

I recently bought a pair of Sennheiser PXC310 BT wireless bluetooth headphones to use with my iPad. It worked fine until one day a friend pressed the "forget device" option in the iPad's bluetooth menu. Since then the iPad is unable to recognize headphone's bluetooth signal, even though the headphone's bluetooth is turned on. Can somebody please help me reconnect the device? Also restarting has NOT helped. Thanks a lot!

So it turns out that infact this is not an Apple issue, it was a Sennheiser issue. The headphones needed to be reset. http://www.sennheiser.co.uk/sennheiser/products.nsf/resources/DD29E4FD02028BB9C1 257611003F55A9/$File/PXC_310_BT_US.pdf#page21 This helps.

Unable to load sqljdbc4.jar driver in PI 7.4

Hi all, I'm facing an issue while loading the jdbc adapter (sqljdbc4.jar) with the SUM in PI 7.4. I downloaded the driver from Download Microsoft JDBC Driver 4.0 for SQL Server from Official Microsoft Download Center and followed the steps in note 1138877 - How to Deploy External Drivers JDBC/JMS Adapters, for the deploy.
Checking note 1829286 - PI: How to check which drivers are installed for the JMS and JDBC Adapters, I see that the loaded driver is not the one I'm trying to load.
The SDA I used to load the driver is the SAPXI3RDPARTY06_0-20009965 (com.sap.aii.adapter.lib.sda)
Anyone faced this issue before?
Thanks in advance,
Jesus Rodriguez

HI,
Is your JDBC adapter shown in communication channel?
I have deployed JDBC driver(sqljdbc4.jar) according tohttp://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b4a020-4ae6-2c10-5a95-fed4ad9a4b60?QuickLink=index&… .
Driver deployed successfully and I have checked it in folder \usr\sap\xxx\DVEBMGS30\j2ee\cluster\bin\ext\com.sap.aii.adapter.lib\lib and it's found ok. But this adapter type not showing in Communication Channel only RFC and SOAP are showing there. I have restarted the server also.

Unable to load bluetooth device driver to xfer files

Similar Messages

Maybe you are looking for