Unable to load command 4

Hello,
I am quite rusty with Robohelp, but trying to get back up to
speed. wWhen I open a project, the following message is displaying:
Unable to load command 4.
It doesn't stop the project loading, I haven't tested to see
if it has any impact when I edit a topic, but does anyone know what
is causing this? I have searched the online help, but this error is
not mentioned..
Also, robohelp has changed quite a bit since I last used it
& I am struggling to come to grips with some of the folder
layouts - I understand the projects are now .xpj, but the root
level of each sub folder contains a.fpj file. I read somewhere that
this allows multi user access to the same project, but can't see
how this works - I certainly couldn't open an individual folder
using this file anyway! Can anyone point me to documentation that
explains what this is about & what it does or doesn't do? or
quickly explain this for me?
many thanks
Maxine

Welcome to the forum
Are you using RH under Vista? That error message was reported
yesterday in another post by someone who was.
The project is opened through the XPJ file instead of the MPJ
in older versions. The FPJ file is not there for you to use in any
way. I believe it is used by RoboHelp in connection with multi
authoring and source safe. It is not a file to be used or touched
by you.

Similar Messages

Orapki - Unable to load wallet using wallet display command

Using Oracle Wallet Manager, I have created a wallet containing various signed certificates.
I am now using orapki command line to view or displa the wallet details. I run the following command:
orapki wallet display -wallet "C:\Documents and Settings\Administrator\ORACLE\WALLETS"
I am then prompted for the wallet password, which I entered, and I get this response:
Unable to load wallet at C:\Documents and Settings\Administrator\ORACLE\WALLETS
I don't understand why I am getting this response. The password is correct (I checked by going into Oracle Wallet Manager), and the wallet is definitely located in the above directory.
Any ideas?
Many thanks!
C.

Hi,
did you try it without apostrophe ' " ' ?
It strange because when i tried this command on linux it's ok.
orapki wallet display -wallet /opt/app/oracle/wallets
Enter wallet password: 1
Requested Certificates:
Subject: CN=oracle
User Certificates:
Oracle Secret Store entries:
ORACLE.SECURITY.DB.ENCRYPTION.*******YAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
ORACLE.SECURITY.DB.ENCRYPTION.AR82gF*******8Wvz9dsQDgrfYAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
ORACLE.SECURITY.DB.ENCRYPTION.****Vnk+7v+yzu9bEsLkAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
ORACLE.SECURITY.DB.ENCRYPTION.*******8E8Zv6LLg5lwjUQAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
ORACLE.SECURITY.DB.ENCRYPTION.MASTERKEY
ORACLE.SECURITY.TS.ENCRYPTION.********sSH2s8spoCAwAAAAAAAAAAAAAAAAAAAAAAAAAA
Trusted Certificates:
Regards
Tom
http://oracledba.cz

Open Directory: "Unable to load replica list"

I'm currently running Mavericks Server 3.1 on my Mac Mini at the home network. I had some issues with the client logins and went for local accounts on the clients instead. Today I finally wanted to fix the problem and go all Open Directory. But the Open Directory service was shut off when I opened the server software. I tried to turn it on but got a message saying "Unable to load replica list". I updated the software to the latest 3.1 but are still having the same issue. I never had any replica list, I only had a standard one from the start, but it seems I can't do anyhing there now.
LDAP log:
Mar 21 22:48:38 xxYY.com slapd[172]: @(#) $OpenLDAP: slapd 2.4.28 (Nov 12 2013 12:02:47) $
[email protected]:/private/var/tmp/OpenLDAP/OpenLDAP-491.1~1/servers/slapd
Mar 21 22:48:38 xxYY.com.com slapd[172]: daemon: SLAP_SOCK_INIT: dtblsize=8192
Mar 21 22:48:39 xxYY.com.com slapd[172]: TLS: found identity in keychain using identity preference.
Mar 21 22:48:42 xxYY.com.com slapd[172]: slap_add_listener: opened additional listener 'ldaps:///'
Mar 21 22:48:42 xxYY.com.com slapd[172]: bdb_monitor_db_open: monitoring disabled; configure monitor database to enable
Mar 21 22:48:44 xxYY.com.com slapd[172]: slapd starting
Mar 21 22:48:44 xxYY.com.com slapd[172]: daemon: posting com.apple.slapd.startup notification
Mar 21 22:48:54 xxYY.com.com slapd[172]: => bdb_idl_delete_key: c_del id failed: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock (-30994)
Mar 21 22:48:54 xxYY.com.com slapd[172]: conn=1022 op=3: attribute "entryCSN" index delete failure
Mar 21 22:50:02 xxYY.com.com slapd[172]: => bdb_idl_delete_key: c_get failed: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock (-30994)
Mar 21 22:50:02 xxYY.com.com slapd[172]: conn=1042 op=3: attribute "entryCSN" index delete failure
I don't understand any of this other than the obvious failure words. Can anyone understand this and help me here?

This procedure is a diagnostic test. It makes no changes to your data. If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Please triple-click anywhere in the line below on this page to select it:
sudo /usr/libexec/slapd -Tt | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. You don't need to post the warning.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.

Unable to load Database Error for one of the BSO Application.

Hello Everyone,
We have one Production Issue like suddenly the an Application Fiji while should be running was stopped. When i tried to restart it its showing Error.
gvw3086-v.atlanta.hp.com:1423.Fiji Start application August 28, 2013 8:32:24 PM SGT Failed
Error: 1002141 Unable to load database [Arirang], error code [1019038]
gvw3086-v.atlanta.hp.com:1423.Fiji.Consol Start database August 28, 2013 8:33:30 PM SGT Failed
Error: 1002141 Unable to load database [Arirang], error code [1019038].
I checked the Log but not sure it correct or not i see this Error message.
[Wed Aug 28 11:33:48 2013]Local/Fiji///7944/Info(1002089)
RECEIVED ABNORMAL SHUTDOWN COMMAND - APPLICATION TERMINATING
But i also saw this error before but the application use to start automatically but this time it did not.
can anyone help me on this.
Regards,
Naveen

Hi,
As i mentioned above its only for one Application Fiji. For a temporary Solution we tried to restart the Hyperion Services. But this did not work. One of the the Hyperion Service HyPService(not sure of the exact name). did not restart. So we have done a a fail over to other node and now the Fiji apps is running. But i don't think so what we have done is the correct fix for the solution. Have any one faced this problem.
Hi John,
Which Doc ID you mean to refer me is that the doc which comes with the Essbase Software.
Regards,
Naveen

Host: Unable to load application configuration + wrong install version on download

i am using 64 bit windows 7 ... when unable to playing video, it redirects me to the adobe download pages to get flash player ... the page says i am about to download flashplayer for win7 64 bit, of 9MB approximately, but the file i get has name "install_flashplayer11x32_mssd_aih.exe" (NOTE THE NUMBER 32) and this file just wont install it ends with error message: HOST: Unable to load application configuration ...
By google i found also file install_flashplayer11x64_mssd_aih.exe (NOTE THE NUMBER 64) ... this file runs the install, i get the final screen saying "installation completed" but after clicking the "finish" button i get an error message saying "an error occured while sending a command to the program" ...
I am just getting mad ... its 3 days i am trying to figure aout this problem ...
i also tryed files as "install_flash_player_11_plugin.exe" , "install_flash_player_11_plugin.msi" , "install_flash_player_11_active_x.exe" and "install_flash_player_11_active_x.msi" ... those files actually proceeds with the install, but at the end, the videos are still not displaying ...
When i am checking the plugins statuses in my firefox addons manager, it says Shockwave Flash is all right ...
The precedent version of flash player was working just fine, i do not understand why you must make such a mess every 2 months ...
How do i get work this?

yes, the pages is http://get.adobe.com/flashplayer/
the page says:
Adobe Flash Player 11.3.300.257 (9.36 MB)
Your system: Windows 64-bit , English, Firefox
but when i click the "Download now" button i get the file named "install_flashplayer11x32_mssd_aih.exe" (NOTE THE NUMBER 32) which wont start and after few seconds i get the message "HOST: Unable to load application configuration"
but finaly i solved the problem ... i just installed the file found by google on some private page "install_flashplayer11x64_mssd_aih.exe" (NOTE THE NUMBER 64)
(the page is here: http://www.ziddu.com/download/16693235/install_flashplayer11x64_mssd_aih.exe.html)
and after that i disabled the protected mode of flashplayer by adding a line in the cfg file
the howto is here: http://forums.adobe.com/thread/1018071
i must say its quite shameful one must get this torture to have movies playing on websites ... this cant happen at open source stuf, at least not for 3 days ...
and being already here and complaining, i must say also (i hope some adobe emploee will read this) i am quite disgusted (and i believe not only me) by adobes bad habit to provide other software than flashplayer, when they include mcafee antivir into the install ...
it is literally taking the user as a stupid one ...
if i will need an antivir, i will look for it ...
i just hate when some society tries to infiltrete in my comp some crap software counting on possibility that at the download i will not pay enough attention
its just ridiculous and shameful behavior

Unable to load package

I have created an SSIS package in BI dev studio which i can debug and run fine. I have saved the dtsx file to a production server which calls it using dtexec as part of a batch script (we are migrating from foxpro). I am getting the following error that i dont understand.
I dont know if this is relevant but i cant execute packages by double clicking them as DTexecui is not installed (not sure why as i have installed the client tools and integration server). Hardware is Dell poweredge 2850 dual xeon 2gb ram with win 2k sp4 and sql 2005 sp1.
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 12:29:19
Error: 2006-07-06 12:29:20.75
   Code: 0xC0011007
   Source: {B06EB426-BBE8-4E09-87FC-32ED753A142F}
   Description: Unable to load the package as XML because of package does not ha
ve a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2006-07-06 12:29:20.79
   Code: 0xC0011002
   Source: {B06EB426-BBE8-4E09-87FC-32ED753A142F}
   Description: Failed to open package file "\\SERVER_A\Scripts\CLIENT\Package.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.". This happens when loading a package and the file cannot be opened or loaded correctly  into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
End Error
Could not load package "\\\\SERVER_A\Scripts\CLIENT\Package.dtsx" because of error 0xC0011002.
Description: Failed to open package file \\SERVER_A\Scripts\CLIENT\Package.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.". This hap
pens when loading a package and the file cannot be opened or loaded correctly in
to the XML document. This can be the result of either providing an incorrect fil
e name was specified when calling LoadPackage or the XML file was specified and
has an incorrect format.
Source: {B06EB426-BBE8-4E09-87FC-32ED753A142F}
Started: 12:29:19
Finished: 12:29:20
Elapsed: 1.719 seconds

We are having the same problem:
My team is using SqlServer 2005 SSIS to develop package for Consolidated Views. This works fine on my machine in Visual Studio when they run it as a script from command prompt from their desktop. However, when they move this package to ETL box, the package runs fine Visual Studio environment but fails when run from the script with the errors:
Started: 12:57:45 PM
Error: 2006-08-04 12:57:45.87
   Code: 0xC0011007
   Source: {519D338B-8874-40A8-A385-0D53E868A57C}
Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2006-08-04 12:57:45.87
   Code: 0xC0011002
   Source: {519D338B-8874-40A8-A385-0D53E868A57C}
Description: Failed to open package file "C:\SM_BI_EXTRACTS_SHARED\Shared\Int
egrated Views\Integrated Views\CV_Product.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.". This happens when loading a package a nd the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
End Error
Could not load package "C:\SM_BI_EXTRACTS_SHARED\Shared\Integrated Views\Integrated Views\CV_Product.dtsx" because of error 0xC0011002.
Description: Failed to open package file "C:\SM_BI_EXTRACTS_SHARED\Shared\Integr
ated Views\Integrated Views\CV_Product.dtsx" due to error 0x800C0006 "The system  cannot locate the object specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be  the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
Source: {519D338B-8874-40A8-A385-0D53E868A57C}
Started: 12:57:45 PM
Finished: 12:57:45 PM
Elapsed: 0.016 seconds
C:\SM_BI_EXTRACTS_SHARED\Shared>rem "C:\Program Files\Microsoft SQL Server\90\DT
S\Binn\dtexec" /f "C:\SM_BI_EXTRACTS_SHARED\Shared\SSIS\IntegratedViews\Integrat
edViews\CV_Sales_Rep.dtsx"
C:\SM_BI_EXTRACTS_SHARED\Shared>rem "C:\Program Files\Microsoft SQL Server\90\DT
S\Binn\dtexec" /f "C:\SM_BI_EXTRACTS_SHARED\Shared\SSIS\IntegratedViews\Integrat
edViews\CV_Sales.dtsx"
Can someone help us understand the problem? We are new to SSIS. We also want to know exactly what needs to be on the Server that will be running our SSIS ETL programs (that is, what components of SSIS -- SQL Server 2K5 is already loaded).
We are using SQL 2005 on Dell Servers running Win 2003, with the latest service packs. Microsoft SQL Server Integration Services Designer Version 9.00.2047.00

Unable to load data through outline load utility

I am unable to load data by using outline load utility.
Assigned Data load dimension as: Account
Driver Dimension as : Period
Driver member as : Jan
Login file:
Account,Jan,Point-of-View,Data Load Cube Name
Investment,1234,"India,Current,Drat,FY13",Plan1
Command at Outline utility
OutlineLoad /A:pract /U:admin /I:C:\test1.csv /D:Account /L:C:\lg.log /X:C:\ex.exc
Exception file
[Thu Mar 28 18:05:39 GMT+05:30 2013] Error occurred loading data record 1: Investments,1234,"""India,Current,Draft,FY14""",Plan1
[Thu Mar 28 18:05:39 GMT+05:30 2013] com.hyperion.planning.InvalidMemberException: The member India,Current,Draft,FY14 does not exist or you do not have access to it.
[Thu Mar 28 18:05:40 GMT+05:30 2013]Planning Outline data store load process finished with exceptions: exceptions occured, examine the exception file for more information. 1 data record was read, 1 data record was processed, 0 were successfully loaded, 1 was rejected.
Logfile:
Successfully logged into "pract" application, Release 11.113, Adapter Interface Version 5, Workforce supported and not enabled, CapEx not supported and not enabled, CSS Version 3
[Thu Mar 28 18:05:38 GMT+05:30 2013]Successfully located and opened input file "C:\load.csv".
[Thu Mar 28 18:05:38 GMT+05:30 2013]Header record fields: Account, Jan, Point-of-View, Data Load Cube Name
[Thu Mar 28 18:05:38 GMT+05:30 2013]Located and using "Account" dimension for loading data in "pract" application.
[Thu Mar 28 18:05:40 GMT+05:30 2013]Load dimension "Account" has been unlocked successfully.
[Thu Mar 28 18:05:40 GMT+05:30 2013]A cube refresh operation will not be performed.
[Thu Mar 28 18:05:40 GMT+05:30 2013]Create security filters operation will not be performed.
[Thu Mar 28 18:05:40 GMT+05:30 2013]Examine the Essbase log files for status if Essbase data was loaded.
[Thu Mar 28 18:05:40 GMT+05:30 2013]Planning Outline data store load process finished with exceptions: exceptions occured, examine the exception file for more information. 1 data record was read, 1 data record was processed, 0 were successfully loaded, 1 was rejected.
Infact those members exist in the Outline.
Any help would be appreciated.

Check for the double quotes (the one John mentioned). Also I can see that you are taking the approach of Data Load dimension. Is Data load dimension and driver members defined correctly in Planning?
Regards
Celvin
http://www.orahyplabs.com
Please mark the answers as helpful/correct if applicable

Application hang for long time (unable to load)

hi and a very good day to all..
i am a new user of J2ME and i am currently using Sun Wireless Toolkit to run a sample program. But, there are some error occur when i open it from the Open Project in Sun Wireless Toolkit. Once i click the launch button on the emulator, it will show the graphic but with a statement 'Please Wait'. it seems like my application is going happen to hang for quite a long time (i even can't open it at all). it happen every time i open my project and i unable to load my program successfully. i want 2 ask, is it because of teh coding? or my pc? or the Sun Wireless Toolkit itself? i never change/edit the coding, since this the sample application of Mobile Compass i downloading from the internet.
there are bundle of code in my application (single application)..but the error 'Please Wait' basically come from 1 of the coding. i'll show it below:
**THE CODE**
package org.qcontinuum.compass;
import javax.microedition.lcdui.*;
import java.util.*;
abstract public class Progress extends Form implements CommandListener, Runnable {
private Displayable mParent;
private Command mCancelCommand;
private Thread mThread;
// private Timer mTimer;
public Progress(String title, Displayable parent) {
super(title);
mParent = parent;
append(new StringItem(null, "Please wait...\n"));
addCommand(mCancelCommand = new Command("Cancel", Command.CANCEL, 0));
setCommandListener(this);
mThread = new Thread(this);
public void start() {
mThread.start();
abstract public void run();
public void commandAction(Command c, Displayable d) {
if (c == mCancelCommand) {
Compass.display(mParent);
p/s: is it the above error related to java.lang.NullPointerException? this is because, with unexpected situation, suddenly the compass program able to download successfully (only sometime), but still it give some error like below, and i still can select the Time Zone for my destination chosen from the given map.
java.lang.NullPointerException
     at java.io.DataInputStream.read(+4)
     at java.io.DataInputStream.readUnsignedShort(+4)
     at java.io.DataInputStream.readUTF(+6)
     at java.io.DataInputStream.readUTF(+4)
     at org.qcontinuum.compass.TimeZone.load(+6)
     at org.qcontinuum.compass.TimeZone.<init>(+9)
     at org.qcontinuum.compass.TimeZone.getZones(+36)
     at org.qcontinuum.compass.LocationTimeZone.<init>(+89)
     at org.qcontinuum.compass.LocationMap.locationSelected(+22)
     at org.qcontinuum.compass.MapCanvas.moveImage(+282)
     at org.qcontinuum.compass.MapCanvas.keyPressed(+22)
     at javax.microedition.lcdui.Canvas.callKeyPressed(+19)
     at javax.microedition.lcdui.Display$DisplayAccessor.keyEvent(+198)
     at javax.microedition.lcdui.Display$DisplayManagerImpl.keyEvent(+11)
     at com.sun.midp.lcdui.DefaultEventHandler.keyEvent(+127)
     at com.sun.midp.lcdui.AutomatedEventHandler.keyEvent(+210)
     at com.sun.midp.lcdui.DefaultEventHandler$QueuedEventHandler.handleVmEvent(+114)
     at com.sun.midp.lcdui.DefaultEventHandler$QueuedEventHandler.run(+57)
can someone help me on this. i really need the answer for this solution. i am still new and in the process of leaning. Thanks a lot and hope all of u can help me. May God bless u. The reference for the above sample program is at http://http://qcontinuum.org/compass/index.htm
Regards,
Miss Iera

Hi,
Do you have variable replaced by another query? If that is case, you will get performance issue, when the prequery is runnig when call var screen.
Do you have variable replaced by authorization? If that is case, for the user will complicated authroization, it will take some time to fill it.
In general, when the variable screen is calling, have you check in sm66, what is the work process doing? In RSRT->run this query with statistics, which part takes most time?

The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.

Hi Guys,
I am creating the library using object model with custom content type. When i am opening document from custom content type, the meta data fields are not displaying in the document and throwing below error.
The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.
Document Information Panel cannot open a new form.
The form contains schema validation errors.
Content for element '{http://schemas.microsoft.com/office/2006/metadata/propertiesRoot}properties' is incomplete according to the DTD/Schema.
Expecting: {http://schemas.microsoft.com/office/2006/metadata/properties}properties.
But after saving the document, then meta data is enabled.
Thanks in advance for suggested solutions.
thanks
Santhosh G

Hi,
For a better troubleshooting, I suggest to do as follows:
1. Please try to update the Location column's schema by following the steps below.
1) Go to Site Settings -> "Site Columns"
2) Click on "Location", after the page is opened. Don't modify any settings, click "OK" to forcibly update the field's schema.
2. Re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
3. Here are some similar links about your issue, please take some time to look at them:
http://social.msdn.microsoft.com/Forums/en-US/sharepointcustomizationlegacy/thread/243b4852-3f17-4a3a-b6d7-187d65a5f088/
http://blogs.msdn.com/b/raresm/archive/2010/03/30/document-information-panel-cannot-open-the-form.aspx
https://joranmarkx.wordpress.com/2012/02/10/sharepoint-document-information-panel-cannot-create-a-new-blank-form/
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
More information:
SharePoint 2010: Creating a Custom Content Type using Visual Studio
http://www.codeproject.com/Articles/410880/SharePoint-Creating-a-Custom-Content-Type-usi
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Dennis Guo
TechNet Community Support

The Document Information Panel was unable to load.

Platform: SharePoint 2013, Office 2013.
Background: When you open an Office document from SharePoint users get this error:
The Document Information Panel was unable to load. The document will continue to load. For more information, contact your system administrator."
"The form cannot be opened. To fix this problem, contact the form designer. Form template:
http://<site address>/../proppanel.xsn. The XML Schema for the form template has an invalid value for the following attribute: location."
I tried running this fix: http://www.cb-net.co.uk/microsoft-articles/2063-sharepoint-2010-templates-and-document-information-panel-errors, but it kept saying that it couldn’t see the url that
I specified (I did check this carefully); think it might only apply to SharePoint 2010 – perhaps the shell syntax is different in 2013.
Can anyone help me out?

Hi Alex,
According to your description, my understanding is that the error occurred when opening a document from SharePoint.
Is this document information panel customized?
I recommend to re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
Best regards.
Thanks
Victoria Xia
TechNet Community Support

The Document Information Panel Was unable to load. Please Help

Hello all,
I just recently created my own custom Document Panel in InfoPath. I uploaded it into a custom content type. I applied this to a document library and it is the standard document panel for creating a new document within that document library. When I click
"New document" I get this error..
The Document Information Panel was unable to load. THe document will continue to open. For more information, contact your system administrator.
Details:
Document Information Panel cannot open a new form.
The form cannot be opened. To fix this problem, contact the form designer.
Form template: http://Mysite/_cts/DIPTestContentType/Myfirstform.xsn
The SOAP response indicates that an error occurred on the server:
Exception of type 'Microsoft.SharePoint.SoapServer.SoapServerException' was thrown.
<detail><errorstring xmlns="http://schemas.microsoft.com/sharepoint/soap/">No item exists at http://Mysite/My DIP Test.docx. It may have been deleted or renamed by another user.</errorstring><errorcode xmlns="(html
for the error code..had to delete it because my body text cannot contain images or links until my account is verified but it is a link to Microsoft support)
...It appears that it is not locating the custom Document Panel.
Could anyone point me in the right direction?
Thanks

Hi Alex,
According to your description, my understanding is that the error occurred when opening a document from SharePoint.
Is this document information panel customized?
I recommend to re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
Best regards.
Thanks
Victoria Xia
TechNet Community Support

ITunes was unable to load dataclass information from Sync Services-Solution

Hello all. I recently upgraded to iTunes 9.1.1.12 on a laptop with Windows XP Pro and the latest iPhone OS (as of May 16,2010). Right after that, I started getting the "iTunes was unable to load dataclass information from Sync Services" error message. After I dismissed that window, it would go ahead and indicate that it was synching for a minute or two, and then indicate (in iTunes) that it was backing up the iPhone. This will run forever unless cancelled and the phone would not synch.
After reading various solutions that worked for others (install Mobile Me, reinstall itunes, run diagnostics, all with numerous reboots in between), this is what worked for me:
1) Open up Windows Services, and stop the Apple Mobile Device and iPod Service, and mark them as manual (as opposed to Automatic).
2) Deinstall iTunes
3) Delete the c:\program files\common files\apple folder (and all sub folders within). This is where the services are stored, and when I did all of these steps without doing this step, it didn't fix my problem. By deleting this folder, you insure that the iTunes install reinstalls these. You should see the services that were stopped in step 1, running again after the install is done. Note: I don't use Safari or QuickTime on my laptop, so I can't say whether or not this step would have any impact on those apps.
4) Reinstall iTunes.
5) Connect the iphone to your computer.
6) At this point, I still got the dataclass error, so I immediately cancelled the synch.
7) Run the diagnostics for the iphone (connectivity and synch).
8) At this point, two DOS windows launched, and I did get another error about being able connect to the synch server.
9) Closed the error message and disconnected the iphone (the phone at this point did not indicate that a synch was occurring).
10) Reconnected the iphone and, voila, it's been working fine ever since.
Hope this helps someone else out until Apple deals with the 9.1.1.12 (and .11) issues with synching.

Either do Windows Control Panel → Administrative Tools and then picking "Services" or typing "Services.msc" in the Run command on Start menu.

I receive the error: Unable to load block component C:\Program Files\Hyperception\VABINF\KeyRcv.dll

I have two Major issues with our Infinity Project computers,
We have one entire lab that is getting this error... "Unable to load
block component C:\Program Files\Hyperception\VABINF\KeyRcv.dll.
Please verify that the component exists and any dependencies it may
have are satisfied." It is also producing this error with
NumEntry.dll. Both files exist. I am not sure what
dependencies these files may have. Ideas?
We have several systems that are giving the following error on one of
our labs... "You have exceeded the number of block functions allowed by
VAB for Infinity; contact Hyperception regarding upgrades." From
what The professor here at UTA told me when I first took on this
project, this was a problem that we had on the previous boards and that
someone at Hyperception was able to help us resolve this problem.
Can you help out with these issues? The first one I need an answer today if possible.
Thanks,

We have seen this type of problem on some computers (we do not know why as of yet).The problem with missing blocks is very likely being caused by file permissions, and can be seen when non-administrators are using VAB software. To resolve this: 1. login as ADMINISTRATOR 2. run the command line script from a DOS prompt as shown below: cacls "C:\Program FIles\Hyperception\VABINF" /T /E /G Everyone:F It will scroll through the name of every file in the provided directory, and all subdirectories. This should reset every file, and allow the USER to access all files in VAB software. This should correct the problem. Regards,Steve

Unable to Load Portable Collection File

Hello, I created a Portable Collector and am trying to load this file into my Zenworks 7.5 (R12) but I keep getting the following error message when I use the wizard to import it:
"There were problems loading 1 workstation inventory files. For details, refer to the Manager event log or the error log file from which you loaded data."
I'm not sure where the Manager event log is nor the error log file that they're referring to. I checked the application and system event logs in MS event viewer but that showed nothing. I resorted to checking the install path event logs and found this in TSCMgrEvent20080617.log:
<EVENT AT="6/17/2008 8:53:55 PM" SEVERITY="Info">
Application Object Info at 6/17/2008 8:53:55 PM on KCAMOM09 by KCAMOM09
Object Deleted
[2.4.100] The object was deleted by another user or process.
Class:"Collection Server"
Name:"KCAMOM09"
Database Persistence Layer Info in CDBPersister::Retrieve at 6/17/2008 8:53:55 PM
Object Deleted
[2.5.9] was deleted by another user.
</EVENT>
<EVENT AT="6/17/2008 8:53:55 PM" SEVERITY="Warning">
ZENworks Asset Management Manager Warning at 6/17/2008 8:53:55 PM on KCAMOM09 by KCAMOM09
Load Portable Collection Failure
[2.8.100] Unable to load workstation inventory file: c:\91DA8A7A-FA60-47D4-9D9D-C8B5CB322DB1.wif.
</EVENT>
I check the inventory from the web console and the computer isn't even listed there. Can anyone shed any light? I've searched the forums and the KB and found nothing at all. I need to get this portable collector up by this weekend...any help would be greatly appreciated!
- Tommy

A couple of things... first, you MUST load a Portable Collection using the same Collection Server as created the Portable Collector. Second, it sounds very much like somehow your Portable.Ini has gotten dinged. That's not a file you can simply edit and save; if you try, ZAM will stop working. It needs to be updated in the File Store before it'll be accepted. That's a security measure to prevent outside influences from altering that file (as others) for nefarious purposes.
Please contact Novell Technical Support and tell them that your Portable.Ini needs to be replaced. They'll send you a good copy of Portable.Ini and set you up with UpdateFS, which will register the good copy in your FileStore.
Another possibility... are you running Oracle instead of MSSQL? It's possible that one or more filenames in the File Store are out of sync with their names in the DB. Oracle being case-sensitive, that's very very easy to do. Again, Novell Technical Support can help you through fixing it if it's true. It's not something that can be simply remedied by oneself.
-- Tim --
Originally Posted by tommytu
I've tried creating a portable collector from the same machine and it seems to not work after installing IR12.
I get the same message if I try to use a portable collector creating from another server (but changing the collectionserverOID in CPS.ini). Will this work? is there something else I have to change?
I've noticed that when I create the portable collector, I only get the following files:
checkpath.exe
collect.bat
coptset.kb
cps.ini
disk1.tsz (4.4 megs)
end.bat
fec.kb
findst.exe
ignore.dat
lastprog.dsk
logappnd.exe
pextract.exe
setcwd.tem
spacew32.exe
udf.kb
zamstr.bat
When I run this collector, I get a "COLLECT2.BAT is not recognized as an internal or external command."
The collector that works has a bunch of other files including collect2.bat
Any ideas?

Unable to load DLL 'OraOps10w.dll': Access is denied.

Below is our error message. This happens around 5 - 7AM daily, and we are struggling with identifying the root cause. It's hard for me to believe it's code related, but anything's possible. Still, what's odd is the app runs fine for a day then an IIS reset is done and everything is fixed. Is there any way this could be related to code and has anyone dealt with this error before? Could a job or some permission being run behind the scenes be using this same dll and cause it to be overwritten?
Thanks, Bryan
Timestamp: 3/4/2010 12:11:23 PM
Message: HandlingInstanceID: 3d9a795c-1256-44c1-b018-f553d4023b12
An exception of type 'System.TypeInitializationException' occurred and was caught.
03/04/2010 07:11:23
Type : System.TypeInitializationException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Message : The type initializer for 'Oracle.DataAccess.Types.OracleDecimal' threw an exception.
Source : Oracle.DataAccess
Help link :
TypeName : Oracle.DataAccess.Types.OracleDecimal
Data : System.Collections.ListDictionaryInternal
TargetSite : Void PostBind_Int32()
Stack Trace : at Oracle.DataAccess.Client.OracleParameter.PostBind_Int32()
at Oracle.DataAccess.Client.OracleParameter.PostBind(OracleConnection conn, OpoSqlValCtx* pOpoSqlValCtx, Int32 arraySize)
at Oracle.DataAccess.Client.OracleCommand.ExecuteNonQuery()
at Oracle.DataAccess.Client.OracleCommandBuilder.DeriveParameters(OracleCommand command)
at Microsoft.Practices.EnterpriseLibrary.Data.Odp.OdpDatabase.DeriveParameters(DbCommand discoveryCommand)
at Microsoft.Practices.EnterpriseLibrary.Data.Database.DiscoverParameters(DbCommand command)
Additional Info:
MachineName : MISTERC
TimeStamp : 3/4/2010 12:11:23 PM
FullName : Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=2.0.0.0, Culture=neutral, PublicKeyToken=3f0a163eed2abd49
ThreadIdentity :
WindowsIdentity : NT AUTHORITY\NETWORK SERVICE
Inner Exception
Type : System.DllNotFoundException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Message : Unable to load DLL 'OraOps10w.dll': Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Source : Oracle.DataAccess
Help link :
TypeName :
Data : System.Collections.ListDictionaryInternal
TargetSite : Int32 AllocValCtxFromNoFmtStr(System.String, IntPtr ByRef)
Stack Trace : at Oracle.DataAccess.Types.OpsDec.AllocValCtxFromNoFmtStr(String numStr, IntPtr& numCtx)
at Oracle.DataAccess.Types.OracleDecimal.GetMaxValue()
at Oracle.DataAccess.Types.OracleDecimal..cctor()

Thanks a lot.
I give permissions to ASP.NET account in directory C:\Oracle\product\10.2.0\client_4 (full control) and the application running ok.

Unable to load command 4

Similar Messages

Maybe you are looking for