Unable to load drivers in Windows XP

When I insert the Leopard disk into the Mac Pro under Windows XP I am not able to autoplay or see anything on the Leopard disk. How am I supposed to load the drivers??
Rachael

With the Mac DVD in windows it will not autoload or show any files on the dvd. In fact windows thinks its a cd rom, which might make sense depending on how the windows partition is placed on the DVD. I have checked the box to show hidden files and the dvd still appears blank.
I returned to OSX and went into terminal and did an ls on every folder on the dvd and found no setup.exe. But then I don't know if these windows files would show up in terminal. In using disk utility I see that there are 16,525 files on the DVD. But again I don't know that this number would show windows files. Disk Utility indicates that the used space on the DVD is 4.1gb which seems small for a dual layer DVD.
I was not using MacDrive. However I did download it and install it on XP. With MacDrive I was able to see the OSX files. Following the instructions from the link you gave me I right clicked on the OSX DVD but there was no menu item named MACDRIVE. I did go into the MacDrive program and selected show windows files, hit apply and returned to the OSX DVD. It still only showed the OS X files even though the program was set to show windows files. I made sure I was seeing hidden files and I was. I manually checked each folder and was unable to find setup.exe on the DVD. I then did a search for setup.exe and nothing found.
My thinking is my DVD does not have or can not access the windows files. If you will, could you please compare the amount of files, 16525 and used space on the DVD as 4.1gb and see how that compares to your dvd.
Is it possible to locate these files in terminal and copy them to a cd rom and then load the windows driver program from the cd rom. If you can find them could you tell me where they are. Are these files downloadable from Apple.
I would be thrilled for any further assistance that you can offer. I would name my first born after you, but that may be a ways off
Rachael

Similar Messages

  • Unable to load drivers on Windows 7 64 bit - HP OfficeJet Pro L7590

    Unable to load drivers on my PC, once worked after cleaning up my PC reloaded latest software from HP download.  Fails everytime via USB tried also direct network connect same result.  Tried uninstall and reinstall including trying to stop windows update from installing driver, this still happens from local directory.  Tried installing software with printer unplugged first, still not working.
    Any help would be great!
    Frank

    First! Thank you in advance for your help, suggestions, and assistance! I use an All-In-One under HP Officejet Pro 8500 Wireless. My computer keeps telling me I need drivers on it for my printer. My Desktop computer is an HP p7 1030. Please help me...tried everything I know. Also, my HP printer will not print in blue. What should print out blue, comes out in a light red or pink. If it's supposed to come out red, it comes out in red, just fine. In addition, I've purchased new cartridges and many times I purchase the 940 XL and the cartridges don't last nearly what they are advertised to last. Very disappointing. I need your help and will greatly appreciate any suggestions you have for me! Thank you! Bette

  • I have put Windows 8 on my Mac pro, in boot camp, no I am unable to load drivers

    I have put Windows 8 on my Mac pro, in boot camp, no I am unable to load drivers to get it working as it should. I have tryed Winows 7 Con, in setup.

    Did you download the drivers to a FAT32 formatted USB drive per the instructions?

  • How to load drivers in Windows 8 Recovery Environment??

    Hi everyone,
    I'm really stuck here with my HP dv7t-7200 laptop.. I'm running Windows 8 Pro (64-bit) & after a Windows Update reboot, I can't get to the start screen. The spinning balls continue for hours & hours. I know there's a recent restore point that I can
    restore to, but I'm having trouble accomplishing this..
    My laptop has a RAID array, so I need to load the storage driver in order for the Windows Recovery Environment to be able to see the hard drives. I don't see any options for doing this, can someone please help..? Here's where I'm at step-by-step:
    1) Boot from Windows 8 DVD
    2) Choose "Repair this computer"
    3) Choose "Troubleshoot"
    4) Choose "Advanced Options"
    5) Choose "System Restore"
    Step (5) gives an error message : "To use System Restore,  you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore"
    I believe this is occurring b/c
    Windows, as booted from DVD, can't see the logical hard drive. If I could figure out how to load the Intel storage driver from USB, I think Window-on-DVD would be able to find the restore point on my hard drive. In Windows 7 Recovery, there's an option to
    "Load drivers" during a repair operation. Where is this option in Windows 8?
    Here are further troubleshooting steps I tried, based on Internet search results:
    A) How do I mount the USB stick (which has the RAID driver for the laptop)? The following link is old, but the steps work. I stopped after step 6.
    Internet search : windows command prompt mount usb
    http://www.ehow.com/how_8541121_mount-usb-drives-windows-xp.html
    B) After navigating to the mounted USB drive & appropriate folder, how do I load the RAID driver for the laptop? The following link suggests to use pnputil.exe, but this program won't run in my Windows 8 DVD recovery environment command prompt.
    In any case, is it true that if & when I'm finally able to load the RAID driver, then DISKPART should be able to mount the drive & System Restore should see the Windows installation & offer to repair it?
    Internet search: load windows drivers from command prompt
    http://superuser.com/questions/531594/windows-how-to-install-driver-from-recovery-command-prompt
    Any help appreciated, 
    Thanks,
    Brad

    Sergey: WOW & thanks, you are definitely the man! I want you to know that you've solved a problem that three levels of MS tech support haven't been able to work out..
    I worked with a level 2 tech agent for several days, 20 minutes at a time. He was going back & forth with level 3 support staff, getting ideas from them & passing on to me. The level 2 guy finally told me it's not possible to load drivers during a Windows
    8 system restore & gave up on my support ticket. 
    The manager then called for customer satisfaction follow-up. He said he had confirmed that Windows 7 DVD had the ability to load drivers for System Restore, but unfortunately this feature was removed for Windows 8. I convinced him that even so, *someone* at
    MS must know a way to to load drivers for System Restore. He said he'd take it on as a personal challenge & would find s/o to assist.
    Shortly thereafter, I got a call from a guy saying he's in the Research department at MS. He was immediately familiar with my problem. He said that he had previously resolved it by breaking the RAID mirror in the BIOS, which would allow Windows 8 DVD to recognize
    one of the drives as an ordinary SATA drive & then load a driver for it. As we started down that path in my BIOS, he became concerned that actually, breaking my RAID mirror might cause data loss. He said he'd get back to me (that was a couple of days ago)..
    So the question in my original post is solved, thank you again.
    P.S. I still can't get Windows 8 restored, and might after all just have to reinstall everything!
    1) I followed your instructions exactly & indeed, System Restore found the Windows 8 installation. 
    2) I chose the latest restore point & executed the restore. Operation initialized successfully but then failed with a disk read error.
    3) I quit the Restore, which caused auto-reboot. I followed your steps again but navigated this time to Repair / Troubleshooting / Advanced Options / Command Prompt
    4) I ran DISKPART, then "list volumes" to determine boot drive letter = E: (on my system)
    5) I exited diskpart, verified I was on a non-boot drive, & ran "chkdsk E: /X /F"
    6) "Corrections to the file system" were made
    7) For good measure, I ran "bootrec /FixMbr" & then "bootrec /FixBoot"
    8) I exited the command prompt & navigated to System Restore. Same error message.
    9) I followed your steps again, but navigated to Automatic Repair. 
    10) Automatic Repair -> "Windows couldn't load correctly"
    Brad

  • Unable to install Drivers on Windows 7

    Hello!
    So, I have a MacBook from late 2009, I believe, but I've since upgraded my OS to Snow Leopard, and as such, have Bootcamp 5. I partitioned my OS to run Windows 7 Pro without issue, but i had to download an earlier version of bootcamp support software to get the drivers to work. I'm all the way back at 4.1 now, but when i try to run the setup, I get an error message that reads, "Boot Camp x64 is unsupported on this computer model." I've managed to install most of the drives manually, but the ones for my trackpad and mouse and iSight camera and so on don't work at all, even though I've installed them. Did i do something wrong, or am I not back far enough and need to download even earlier support software?

    His post indicates that he has a 2012 MBP, which would not have come with Snow Leopard. Also, the drivers on the Snow Leopard disk would not be compatible with Windows 7.
    Download this software package and install it from within Windows:
    http://support.apple.com/kb/DL1638

  • Unable to instal VOX USB 2.0 drivers in WINDOWS XP Prof. SP2

    Hi,
    I am unable to instal drivers in Windows XP Prof. SP2 for VOX USB 2.0. When I instal drivers from manufacturer's CD, instalation tells me, that it cannot instal some update for XP SP1. But I have SP2, so it should be OK. Then, after computer restart, I connected VOX and windows could not recognize it and asked me for drivers. I tried to instal drivers manually from the cd, but windows always tells me, that it cannot find driver on CD. I tried to download latest drivers from MSI website, but I had the same problem with it. What should I do? I am unable to use the TV tuner 
    Could anybody write me exact procedure how to instal it, please please!
    Thank You very much.
    (I have tried to instal it on another computer with Windows XP Prof. SP2 and it did not work also. The same problem.)

    Yes, my system has USB 2.0. It is P4 2.4GHz Northwood, motherboard: MSI 648 Max, 1GB of DDRAM (333MHz), MSI GeForce 4 MX 460, SoundBlaster Live! player 1024, pci card with aditional USB 2.0 ports (NEC chipset), SIS 900 pci NIC, 2x WesternDigital Caviar 1200JB, pci IDE controller SiliconImage 0680a (harddisks are not connected as RAID), DVD-ROM Pioneer, DVD burner LG GSA-4163B.
    I have tried to connect VOX directly to USB port on motherboard and also to NEC USB pci card, but it did not work anyway.
    I have disconnected all USB devices from the computer, except the mouse.
    Windows is updated from MS Windowsupdate website.  I use Windows XP SP2 firewall and Microsoft Antispyware beta and antivirus software (I have tried to turn them off during the TV VOX installation, but it did not help).
    And I  also use power supply for TV VOX.

  • When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later".

    When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later". I have completely uninstalled and then reinstalled iTunes. I have also completely reset my iTouch to factory defaults. I have even followed all the advice provided previously to other forum member with the same problem. Nothing seems to work. Please help me someone.

    I'm getting the same problem with both my IPad 4 and iPhone 5
    Just started a few weeks back, Since then I have had two Itunes updates.
    Is this something Apple is aware of and trying to fix?

  • TS2529 iTunes was unable to load data class information from Sync Services. Reconnect or try again later is the error message I am getting when i connect my iphone 4 to my windows based computer. Any help out there?

    iTunes was unable to load data class information from Sync Services. Reconnect or try again later. This is the message when I try to connect my iphone 4 to my computer. If anyone could help me with this, I would appreciate it.

    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591

  • Unable to load ITUNES onto PC HP, windows 7 Home Version.  Error message reads "Application Application Support not found".  "Unistall and reload".  I have done that 4 times on Explorer and Firefox without success.  Help??

    Unable to load ITUNES onto PC HP, windows 7 Home Version.  Error message reads "Application Application Support not found".  "Uninstall and reload".  I have done that 4 times on Explorer and Firefox without success.  Help??

    I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

  • Unable to load from Windows Media Player to iPod Touch. Help appreciated Big Al

    Unable to load music or audiobook from Windows Media PLayer to my iPod Touch.  Also unable to connect to internet via NON WiFi Broadband.  Help please.

    You don't.
    You sync via itunes
    Put all of your music in itunes.

  • "Unable to load data" error after Windows update

    Hi all,
    I've been maintaining a LightSwitch desktop app for a couple of years now.  The app runs on a server and several client machines access it.  Sometime in the last few months, any client that has Windows Update enabled has failed to load data.  Instead
    it shows red crosses where the data should be and the tooltip, "Unable to load data. Please check your connection and try loading again."
    Other clients that don't have updates enabled are fine.  Has anyone else run into this issue?  Does anyone know how to resolve it?
    Thanks,
    Liam

    Hi Angie,
    Thanks for your reply.  I've enabled diagnostics as described.  Here's what I find.
    When I load my LightSwitch screen, I get the following entry highlighted red in Fiddler:
    GET http://127.0.0.1:6853/callback.json?_=1377245349573
    502 Fiddler - Connection Failed (text/html)
    GET http://127.0.0.1:6853/callback.json?_=1377245349573 HTTP/1.1
    Host: 127.0.0.1:6853
    Proxy-Connection: keep-alive
    Accept: application/json, text/javascript, */*; q=0.01
    User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/29.0.1547.57 Safari/537.36
    Accept-Encoding: gzip,deflate,sdch
    Accept-Language: en-GB,en;q=0.8
    HTTP/1.1 502 Fiddler - Connection Failed
    Date: Fri, 23 Aug 2013 08:09:10 GMT
    Content-Type: text/html; charset=UTF-8
    Connection: close
    Timestamp: 09:09:10.584
    [Fiddler] The socket connection to 127.0.0.1 failed. <br />ErrorCode: 10061. <br />No connection could be made because the target machine actively refused it 127.0.0.1:6853
    After that, I see a long list of each of the queries LightSwitch is calling for all the elements on the screen.  Each one contains the following error:
    HTTP/1.1 200 OK
    Cache-Control: no-cache
    Pragma: no-cache
    Content-Length: 747
    Content-Type: application/msbin1
    Expires: -1
    Server: Microsoft-IIS/7.5
    X-AspNet-Version: 4.0.30319
    X-Powered-By: ASP.NET
    Date: Fri, 23 Aug 2013 08:10:38 GMT
    @Fault5http://schemas.microsoft.com/ws/2005/05/envelope/none@Code@Value�Sender@Reason@Textxmllang�en-GB��<?xml version="1.0" encoding="utf-16"?><ExceptionInfo><Message>User does not have access to the invoked operation. Your session may have timed out. Please restart the application. Operation name: 'HSEComments_All'.</Message></ExceptionInfo>@Detail@DomainServiceFaultDomainServices i)http://www.w3.org/2001/XMLSchema-instance@ ErrorCode�@ErrorMessage��<?xml version="1.0" encoding="utf-16"?><ExceptionInfo><Message>User does not have access to the invoked operation. Your session may have timed out. Please restart the application. Operation name: 'HSEComments_All'.</Message></ExceptionInfo>@IsDomainException�
    Can you help in interpreting these?
    Thanks,
    Liam

  • ITunes was unable to load data class information from sync services on windows pc

    I have been able to use iTunes on my windows 7 pc for several years with no problem to sync calendar and contact with Outlook 2013; Suddenly I'm getting this error message.  iTunes recognises an iphone but I can't sync it.  I've tried uninstalling iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support, rebooted the PC and reinstalled iTunes.  Nothing works.  Can anyone help please?

    Error message missed off previous post - "iTunes was unable to load data class information from sync services"

  • I can't transfer music to my ipod touch and a window pops up saying that iTunes was unable to load data class information from Sync Services.

    I'm trying to transfer music to my iPod touch using iTunes, but it won't let me.
    It syncs fine now, but then this window pops up and I can't transfer musics.
    Is there anyone who can help me?

    http://support.apple.com/kb/TS2690
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added

    Hi there,
    I recently had the following situation, where I changed the source of my CSV file in Power Query.
    Once I had reloaded the file, it would then not load into Power Pivot. So I disabled the loading from Power Query into Power Pivot. I then enabled the loading to the Data Model. Which then successfully loaded the data into Power Pivot.
    But once I went into Power Pivot, had a look, then saved the Excel file. Once saved I closed the Excel file. I then opened the Excel file again and all the sheets that interact with the Power Pivot data work fine.
    But if I go and open Power Pivot I get the following error: Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added.
    This is what I get from the Call Stack
       at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
       at Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(DataModelingColumn column, SynonymCollection synonyms)
       at Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
       at Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
       at Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
       at Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
    I would assume that the issue is with the synonyms and for some reason, when I disabled the loading of my data into the Power Pivot Model, it did not remove the associations to the actual table and synonyms.
    If I renamed the table in Power Pivot it all works fine. So that was my work around. Fortunately I did have a copy of the Excel workbook before I made this change. So I could then go and add back in all the relevant data to my table.
    Has anyone had this before and know how to fix it?
    http://www.bidn.com/blogs/guavaq

    Hi there
    I can share the work book, if possible to send me an email address. As the workbook size is about 9Mb.
    Thanks
    Gilbert
    http://www.bidn.com/blogs/guavaq

  • Unable to load ADFS 2.0 in Windows Server 2.0

    I am trying to federate a domain in Office 365. The AD FS servers are running Windows 2012 R2 and AD FS appears to be working properly. The errors I receive are shown below.
    PS C:\Windows\system32> import-module msonline
    PS C:\Windows\system32> Connect-MsolService    [credentials entered]
    PS C:\Windows\system32> get-msoldomain
    Name                                                                                   
    Status          Authentication
    contoso.com                                                                          
    Verified        Managed
    adatum.com                                                                    
    Verified        Managed
    fabrikam.com                                                                        
    Verified        Managed
    PS C:\Windows\system32> Convert-MsolDomainToFederated -domainname contoso.com
    Convert-MsolDomainToFederated : Failed to connect to Active Directory Federation Services 2.0 on the local machine.
    Please try running Set-MsolADFSContext before running this command again.
    At line:1 char:1
    + Convert-MsolDomainToFederated -domainname contoso.com
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidOperation: (:) [Convert-MsolDomainToFederated], FederationException
        + FullyQualifiedErrorId : InvalidCommandSequenceGeneva,Microsoft.Online.Identity.Federation.Powershell.ConvertDoma
       inToFederated
    PS C:\Windows\system32> Set-MsolADFSContext -Computer ADFS01
    Set-MsolADFSContext : Unable to load the Active Directory Federation Services 2.0 snap-in for Windows PowerShell.
    At line:1 char:1
    + Set-MsolADFSContext -Computer ADFS01
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidOperation: (:) [Set-MsolADFSContext], FederationException
        + FullyQualifiedErrorId : SnapInLoadFailed,Microsoft.Online.Identity.Federation.Powershell.ContextCredentialsComma
       nd
    I've not had this problem before when using Server 2008 R2.  What do I have to do to the AD FS server to make this work?
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

    I'm going to answer my own question.  The following registry key and values were present.  There are blog and forum posts suggesting that this needs to be added, but they only apply to Windows Server 2012, not Windows 2012 R2.  Further, this
    registry key and values were present on my servers even though I did not add them manually.
    Removing this key, which removes the values underneath, solved my problem.
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\PowerShellSnapIns]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1\PowerShellSnapIns\Microsoft.Adfs.PowerShell]
    "ApplicationBase"="C:\\Windows\\ADFS"
    "Version"="6.2.0.0"
    "AssemblyName"="Microsoft.IdentityServer.PowerShell, Version=6.2.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
    "Description"="This powershell snap-in contains cmdlets used to manage Microsoft Identity Server resources."
    "PowerShellVersion"="1.0"
    "ModuleName"="C:\\Windows\\ADFS\\Microsoft.IdentityServer.PowerShell.dll"
    "Vendor"="Microsoft"
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Maybe you are looking for