Unable to load facebook on my MacBook Pro

I have been unable to load facebook on my MacBook Pro for almost the past 2 weeks on my wireless internet at home. It started out not loading using Google Chrome, but the problem quickly spread to all of my browsers (Chrome, Firefox, and Safari). On Chrome I get the following message: "No Data Recieved Unable to load the webpage because the server sent no data. Error 324." On Safari, it says "Safari can't open the page." My internet connection is fine for all other websites other than facebook. Furthermore, when I brought my MacBook Pro out-of-town facebook worked fine on a different internet source. In addition, facebook and all other websites are able to load on other devices on my home internet (desktops, laptops, iPad, iPod).
I have contacted both my internet service provider and the manufacturer of my router and neither company had any idea how to fix it. They seemed to think it was either a facebook problem or a problem with my MacBook.
I have a tried a few things that seemed to provide a temporary fix lasting about 5 mintues or a few clicks around facebook:
1. clearing the cache and history in my browswers
2. changing some settings on my router
3. restarting the router
4. connecting to the internet using ethernet instead of wireless
I would really appreciate any help in trying to fix this problem!

Hello there,
I had the same exact problem. This is a simple DNS issue which you can fix through your system prefernces. Look at the DNS setup (System Preferences/Network/Wireless/Advanced)
After doing so, go to THC/IP then there try to change in the Configure IPV: to DNS manual address, try inserting the ip address you had previously. It wont work but by doing so, the computer will try to inster new settings. Then go back to was there before which is Using DHCP... then go back to DNS tab on top add your ip address and connect as usual. This worked for me, I was lucky I have no clue how it worked I was just trying to fool around with the DNS settings which are clearly the source of the issue.
hope it works for you.

Similar Messages

Unable to load Snow Leopard on MacBook Pro

I have a MacBook Pro (2.16 GHz with 1 GB Ram running 10.5.8). Bought two copies of Snow Leopard. Easily installed on my MacPro 2x2.26 Quad-Core). I have tried both copies on the MacBook, it only runs the drive for awhile and spits out the disk. Have tried to hold down "C" while restarting to no avail. Anyone have any ideas.
cheers,

1. You should be able to install using [firewire target disk mode|http://support.apple.com/kb/HT1661] the "conventional" way if both of your Macs properly equipped (I am sure they are--see link) and
2. You should be able install using an image file of your DVD either while in firewire target disk mode or from a bootable external drive. Put the file on the other computer if doing the first and on the external if doing the second. To make an image file, use another computer, and
a. Insert the DVD/CD;
b. Open Disk Utility, and select the DVD/CD from the left side list (select the DVD/CD icon on top);
c. from the DU File menu select New Disk Image from Disk 1;
d. Choose to format the disk image as DVD/CD Master, name the disk image and click Save.
Message was edited by: donv (The Ghost)

I am unable to copy files from my macbook pro to my external hard disk.

I am unable to copy files from my macbook pro to my external hard disk. I tried to copy a movie 800mb in size to my EDD and it shows the loading box and it says zero kb loaded out of 800mb and sometimes it loads a a few kb of the file, then after a while it ejects my hard disk and gives a message saying you should have ejected it properly. and it sometimes gives this message
"The Finder can’t complete the operation because some data in “....” can’t be read or written.
(Error code -36)".
This happens with a range of files if they are more than a few mb in size, so I am pretty sure its not the file problem. It also occurs sometimes when i try to copy from my EDD to my mac.
I have tried everything. I formatted my EDD to MS-DOS (FAT) format because i need to use it with mac and windows. I tried resetting The SMC and the PRAM and NVRAM. I tried verify and disk repair on disk utility. But the same thing happens over again and it is really frustrating. The problem doesnt happen with my PC.
My EDD is an Apollo 320GB hard drive from Imation.
Also are there any particular EDD brands that may not have this issue with MACs and can be used on mac and PC?
Thanks in advance!

Hey guys,
So this is follow up from my debarkle with the EDD. I found out my problem with copying files from Mac to EDD and vice versa was a result of a not so good EDD ( i had an apollo hard drive from imation) that was not very compatible with macs. So i did my research and found out that the best hard drives were Western Digital and Seagate. I bought the newest western digital EDD 1TB and formated it to FAT32 and guess what...no problems so far. The only problem is that FAT32 format doesn't copy files larger than about 4 gigs so i couldnt copy a movie from my brothers computer onto my EDD that was 1080p. You could probably resolve that by partitioning a small part of your hard drive in ExFAT? but yeah, hopefully that helped guys.
Aaisha

I cannot access facebook on my macbook pro.

i cannot access facebook on my macbook pro. all other websites are fine. tried accessing my fb account on my partner's macbook pro and it worked.
Please help me..

my status bar just goes half way and just freeze.. i dont get any error messages at all.. it just stops loading and leaves me on the page im currently on. please help.. thanks.. cheers

I am unable to open Photo on my MacBook Pro after installing ilife 11 from a disc. The message I get says "you can't open the application iPhoto because it may be damaged or incomplete. What can I do?!

I am unable to open iPhoto on my Macbook Pro (OSX 10.9.3) after installing ilife 11 from a disc. The message I get is "you can't open the application iPhoto because it may be damaged or incomplete. What can I do?! Any help will be greatly appreciated.

Reinstall it.This time delete the receipts first.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Important:
As you're on 10.9.3 you'll need to update iPhoto to v9.5 before opening it. Use Software update.

I'm unable to burn DVDs on my MacBook Pro 2.16 GHz, 2GB 667 MHz DDR2 SDRAM

Hello all,
I'm unable to burn DVDs on my MacBook Pro 2.16 GHz, 2GB 667 MHz DDR2 SDRAM running 10.4.8. When I go to burn a DVD I get one of two codes 0X8002006D, 0X80020022, why is that a 3,000 CPU cant burn a DVD. My Mac is total up to date with all software and firmware. I saw in the Discussions that I'm not the first person to have this issue but I don't see an answer from Apple, I'm pretty sure it not the DVDs (Memorex DVD-R 16X) because my ****** pc can burn them and it was a 100 pack that I used about 50 from it that I burn on both Macs and the ****** PC. I also have a Dual 2 GHz PowerPC G5 with 2.5 GB DDR SDRAM running 10.4.8 which is also unable to burn them and it also comes up with the same errors. I have not had this issue until I updated my Macs to 10.4.8, PLEASE HELP.
Thanks,
Coons

Yes I can play CDs and DVDs but I was not able to burn a 4.01GB folder, I have since decreased the folder size to 3.75 and was able to burn the DVD. I'm creating another just to double check, my G5 was unable to complete the task and I also gave a shot at a 2.77GB folder and it failed I also gave a 200Mb file a chance but it still did not burn. I was able to burn the same 200MB file on a CD, PLEASE I NEED HELP.

I'm having issues loading Youtube on my MacBook Pro for about a week now. I'm not sure if this is because of my computer or internet but my sister's PC loads Youtube completely fine. Can someone help me figure this out?

I'm having issues loading Youtube on my MacBook Pro for about a week now. I'm not sure if this is because of my computer or internet but my sister's PC loads Youtube completely fine. Can someone help me figure this out?

Hi, I had been having the same problem for over a week, but both my window's HP and my 2011 macbook pro barely could load youtube. What kind of router you have? I was using a belkin play router that was only 8 months old, switched to a new AirPort Extreme Base Station and now everything works perfect.

I am unable to access intranet on my MacBook Pro 13" with OS X mavericks. Is it possible to use files on the Local Area Network?

I am unable to access intranet on my MacBook Pro 13" with OS X mavericks. Is it possible to use files on the Local Area Network? I use the files on the Local Area Network on my windows computer by typing in the I.P address in the library. Kindly guide me how i can use these files stored over the Local Area Network.

I disabled GateKeeper's automatic blocking of unrecognised developers, and so I was able to install the driver.
The Mobile Connect program is now installed, but the computer still does not recognise the modem.
I also borrowed a USB hub from a friend and it didn't make a difference.

I enjoy karaoke and have numerous vcd's of karaoke songs. I wanted to make a compilation vcd of my own, containing my favourite karaoke songs but I am unable to achieve this on my macbook pro (mac os 10.6.8). Can anyone tell me how to step by step?

i enjoy karaoke and have numerous vcd's of karaoke songs. I wanted to make a compilation vcd of my own, containing my favourite karaoke songs but I am unable to achieve this on my macbook pro (mac os 10.6.8). Can you tell me how to step by step?

I had issues in 10.4.7 as well as 10.4.8.
My problems occurred at the beginning of 10.4.8, then many users brought light to me using WEP, which was not working that great. I changed my connections to WPA2 and my problem has disappeared. If my problem didn't resolve the way it did, I would have mentioned it the next time I visited an apple store.
The bottom line is that assumptions, complaining, and self diagnostics don't get many people very far and bringing the problem to apple helps them know the incidence of this problem, and helps them develop a reliable solution.
Though some users have reported the "cold shoulder" when reporting Airport problems to apple... I hope you weren't one of them.

How do I share a hard drive with the new iMac to load a disk from macbook pro

How do I share a hard drive with the new iMac to load a disk from macbook pro. I want to install office for Mac from a disk but dont know how to share har drive from macpro
thanks

The new iMac's don' t have DVD drives however almost all have a disk drive. The easiest method of installing MS Office for Mac on your new iMac is to download it from Microsoft and then input the code you received when you purchased your original license. Otherwise you can use the DVD drive on your MBP to install on your iMac, that feature is called Remote Disc. Instructions for Remote Disc can be found at:http://support.apple.com/kb/ht5287

I am not able to log into FaceBook on my macbook pro using my Apple ID

I am not able to log into FaceBook on my macbook pro using my Apple ID

Then, what razmee209 says. It's apparently not a phone issue since other people can get in, so I'd call the facebook app developer and let them know what's going on.

I cannot access facebook on my MacBook Pro. I am able to access every other website. When trying to access facebook it says that page cannot be displayed as safari cannot establish a connection.

I cannot access facebook on my MacBook Pro. I am able to access every other website. When trying to access facebook it says that page cannot be displayed as safari cannot establish a connection. I was able to access it just fine few weeks ago....
Please help!

Hi Justysiag,
If you are having issues opening a particular web site in Safari on your MacBook Pro, you may want to follow the steps in this article to see if you can resolve the issue -
Safari 7 (Mavericks): If Safari can’t open a website
http://support.apple.com/kb/PH17169
Thanks for using Apple Support Communities.
Best,
Brett L

I am unable to connect my iPhone5 to macbook Pro running on Version 10.6.8. Help please?

I am unable to connect my iPhone5 to macbook Pro running on Version 10.6.8. Help please?

You probably need to upgrade your Mac software to 10.8.2 to handle ios6.

Flash CS5 unable to play .FLV files on Macbook Pro

I have a colleague who is trying to put together a Flash package for me on her macbook pro. It needs to play an flv file. She is unable to play flv files on her computer either in Flash or using the Adobe Media Player. I have no problem playing the same files on my macbook pro, we're both running the latest OS and have version 1.8 of Adobe Media Player.
She went to the Adobe site to download the latest version of Adobe Media Player, hoping that might include whatever component is missing on her system. Because of Adobe's decision not to distribute AMP that didn't help. She has Flash Professional CS5 11.0.2 on her system. When she imports an flv video into a Flash project and tries to play it she gets an error message saying it can't stream the video. Note that the video is on her hard drive, it is NOT on the internet so no streaming should be required.
The actual error message is: "the video player is in the connection error state. It enters this state when a video stream attempted to load but was unsuccessful. There are two possible reasons for the error: no connection to the server or the stream was not found."
Since it's a file on her hard drive, and she has loaded the file into the Adobe development environment successfully, the one thing we know for certain is that neither of these reasons is correct. Something is obviously missing on her system, what is it and what can we do to fix it?

I'm getting error too (Error #2044: Unhandled NetStatusEvent:. level=error, code=NetStream.Play.StreamNotFound). I'm getting this with CS5. This file was previously made in CS4 and never got this error.
Everything (fla and flv too) is on external hard disk.
As this work requires to be exported to mov, I've found out that everything needs to be on the mac (don't know for pc), like on desktop.
So, let me wrap up disadvantages I got with Flash CS5:
- TextField.embedFont makes the font disappear in CS5, so I can't use it, so I can't "play" with text in a comfortable way (in CS4, with embedFont = true, I was able to rotate and stuff). Now I have to make a bitmap out of it. It means 3 lines of code and a new variable, instead of just an easy one.
- I have to rebuild my entire source path structure for AS classes, as my old one (that took me years of effort to be reasonable and used to work just fine in CS4).
- I have to move stuff from my hard drive to the desktop, to make flv be played and to make a mov out of my animation.
CS5 is making my job harder and making me lose a lot of time to find out errors that have no good reason to exist (it was not error. just "place CS5 doesn't like").

I am having a problem with display and loading problem on my macbook pro.

when i am trying to login into my user account on my macbook pro. it just starts loading but after that it doesnt display anything and keeps on loading for hours.Also when i logged into guest user it asked me to restart for the safari use only and after using that option i am just able to use safari with the displaying problems.please reply mw with an answer.

Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more appropriate and active forum for your product where you can get help faster.

Unable to load facebook on my MacBook Pro

Similar Messages

Maybe you are looking for