Unable to load Falt file in our new Upgrade BI 7 system ?

Hi all,
I am an APO DP consultant and we have recently upgraded from SCM 4.1 version to SCM 7.0. As Apo had Build in BI system and SCM 4.1 uses BI 3.5 and now SCM we have upgraded to BI 7.0.
While testing to uplaod sales data into infocube from flat file I an gettor error with message update delivered error code 7 and message no is RSAR119 and there were no further details . We tried to chenge the target to PSA and it worked and not working loading to cube.
I reactivated transfer rule and update rule but still not working . Can anyone suggest solution for this?
Edited by: KVerma on Jul 10, 2009 8:54 PM

Hi
I also had this issue recently while testing upgrate to SCM 7.0. Check note 1152453.
Rub Program RSDG_CUBE_ACTIVATE, Select your cube and run. This should resolve your issue later I would suggest to activate all cubes.
You can also run job RSDD_RSTMPLWIDTP_GEN_ALL this wil activate all cubes and write programs.
Thanks
Siva

Similar Messages

Crystal Xcelsius is unable to load this file... no upgrade 4.5 to 2008 :(

Post Author: jezbraker
CA Forum: Xcelsius and Live Office
Anyone else having problems getting 4.5 files to open in 2008? I create a nice simple new xlf with a simple xls behind it and a just a grid component in 4.5, then try open the file in 2008 and i get... Crystal Xcelsius is unable to load this file. This file may be corrupt or have features that cannot be supported by this version of Crystal Xcelsius.im on the following versions...Version 4.5Application Version 4.2.4.3File Version 1.1.0.2Version 2008Application Version 5.0.0.99Build Number 12,0,0,121 I'm hoping that this is just a version issue with what was on ESD... the help file seem to suggest upgrade is simple so would but good to here of folks having sucess - and if so what versions your on thanks!jez.

Post Author: jezbraker
CA Forum: Xcelsius and Live Office
well i hope thats the case... but its a bit strange that neither the beta versions i tested or this ESD version (its not very clear as to if its pre-release - nothing on the splashscreen/about to indicate its not the full thing) can open 4.5 files... suggests that the beta did not cover backward compatability which is a bit concerning :(hopefully im just missing something simple!from the help file in the '08 version i have here...Xcelsius supports the ability to import a visualization created
with Xcelsius 4.5. This import ability lets Xcelsius 4.5 customers upgrade their
existing visualizations to take advantage of the new features of Xcelsius 2008.
Backup your current XLF, JPEG, and external SWF files before upgrading your
visualization.
Note: Xcelsius 3.0, 3.5, and 4.0 files cannot be
imported into Xcelsius 2008. To use these files in Xcelsius 2008 you must first
import them into Xcelsius 4.5, then import the files into Xcelsius 2008.

I need to move my old hard drive files to our new computer, how?

Hey I need to move my old hard drive files to our new computer. It is a SATA 3.5. Is it as simple as putting it in an enclosure and plugging it to new computer.
Can I do this at the start with the IMAC? I don't have the old computer, just the drive.

*Hi thresherman, Welcome* to Apple's Users Help Users Forums.
To go from PPC to intel the use of migration assistant is not the recommendation. The definitive solution is here from Kappy and a brody.
http://discussions.apple.com/thread.jspa?threadID=435350
Good Luck, JP

Unable to load prn file in LedgerLink

I am working with HE641 and having to use LedgerLink to load files since there is some account translation. For some reason I am unable to load the file. This is through Citrix. During the load process, the files appears to load because the status bar appears to increment upward but when I look at Data Entry in the app, I can not see any results. Cany anyone help me with this?

I had to get security to the translation file through Citrix.

Had Acrobat 7.0 Pro on prior laptop. Got new laptop and unable to load my purchased copy on new machine. Getting message 0cx00000fd. Why can't I transfer program to new computer?

Had Acrobat 7.0 Pro on prior laptop. Got new laptop and unable to load my purchased copy on new machine. Getting message 0cx00000fd. Why can't I transfer program to new computer?

The Error is windows specific error. However try Downloading it from Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

I am unable to load GRAPHIC files using the transaction SFP.

I am unable to load GRAPHIC files using the transaction SFP.
The error message says that there is no connection to the below given url.
http://<hostname:8000>/sap/bc/fp/
is it something like i have to activate this service in transaction sicf ?

Try http://<hostname:8000>/sap/bc/fp/!
! at the end ..
Regards
Juan

QuickTime fails to launch: "Unable to load nib file"

QuickTime has decided today that it will no longer launch. When I look at the message generated in Console it says:
"QuickTime Player[300] Unable to load nib file: MainMenu, exiting"
This has been happening since I updated my copy of Fetch. I have tried reinstalling QuickTime but it hasn't helped.
I am running QuickTime Pro 7.1.6 with DivX and Flip4Mac, both of which were installed some time ago and everything has been running fine until this morning.
Any ideas what I should do next?
Thanks.
iBook G3 Mac OS X (10.3.9) QuickTime Pro 7.1.6 with DivX and Flip4Mac 2.1.1.70

Did you repair permissions & restart after the
update?
I tried repairing the permissions and QuickTime still failed to launch; however, I didn't think to restart the machine. But then I fired up TechTool and it found problems with the volume structure, repaired it, and all is good now. So I'm not sure if TechTool fixed the problem or if it was eventually restarting after repairing the permissions.

Mail Unable to load nib file: MailViewer

Mail decided not to work. looking at the console I get:
Mail Unable to load nib file: MailViewer, exiting
I read somewhere that it might have gotten corrupted, and that therefore I need to reinstall. Is there an easy way to install just Mail in its latest version and not go through (likely outdated) pkg installers? Even better, any other way of solving this problem?
Many thanks in advance.
Ivan

I would say you have a serious issue with your hard drive. Consider doing a format with zero all data options enabled, and see if it pass. You might also consider buying some advanced disk repair utility to test (and repair ?) the drive (TechTool, DiskWarrior or Drive 10).
Is there an (windows burnable) image "updated rescue disk"?
No, the restore disk comes with each machine and is to keep in safe place.
Use it to reinstall your system and apply the Mac OS Update via Software Update or using the same combo update.
Why reward points ?

Xcelsius is unable to load this file.It may be corrupt or have features

Hi All,
While i am opening XLF file i got bellow message:
"Xcelsius is unable to load this file.It may be corrupt or have features that are supported by this version of Xcelsius"
i m unable to open that file .I lost whole thing.so can any one help me how to resolve this problem.
Regards,
Ramana

Hi,
Which version of xcelsius you are using now !
The file which you are trying to open may be created in higher version of xcelsius
So upgrade to latest version and try.
Before opening xcelsius check if EXcel.exe is running from taskmanager -->processes
if that is runnning end the process.
@sri

Quicktime: Unable to load nib file: MainMenu, exiting.

Recently updated OS X to 10.6.8
Ever since the upgrade, my system quicktime player is completely dead.   Will not launch, displays generic icon in the application folder.
iMac:QuickTime Player.app ryan$ pwd
/Applications/QuickTime Player.app
iMac:QuickTime Player.app ryan$ ls
Contents
iMac:QuickTime Player.app ryan$ cd C*
iMac:Contents ryan$ ls
Info.plist    MacOS        Resources    _CodeSignature    version.plist
iMac:Contents ryan$ cd M*
iMac:MacOS ryan$ ls
QuickTime Player
iMac:MacOS ryan$ ./Q*
2011-12-16 13:40:05.201 QuickTime Player[30859:903] Unable to load nib file: MainMenu, exiting
iMac:MacOS ryan$
I've run the repair permissions utility, within the disk utility several times on the volume.
I've run the verify disk utility on the volume - no problems reported.
No other application issues that I've noticed; only quicktime is broken.
Not sure what to do next.   If it gave me a clue about which "nib" file it was after I could go check it.
iMac:English.lproj ryan$ pwd
/Applications/QuickTime Player.app/Contents/Resources/English.lproj
iMac:English.lproj ryan$ ls -lrt
total 0
-rw-r--r-- 1 root wheel 5143 Aug 8 06:39 ExportRefMovieForWebTemplate.html
-rw-r--r-- 1 root wheel   350 Aug 8 06:39 SaveForWebiFrameTemplate.html
drwxr-xr-x 2 root wheel   102 Aug 8 06:41 MGRemoteHUDView.nib
iMac:English.lproj ryan$ cd *nib
iMac:MGRemoteHUDView.nib ryan$ ls -lrt
total 0
-rw-r--r-- 1 root wheel 4208 Aug 8 06:39 keyedobjects.nib
Am I missing files in that directory structure??

Did you repair permissions & restart after the
update?
I tried repairing the permissions and QuickTime still failed to launch; however, I didn't think to restart the machine. But then I fired up TechTool and it found problems with the volume structure, repaired it, and all is good now. So I'm not sure if TechTool fixed the problem or if it was eventually restarting after repairing the permissions.

Xcelsius is unable to load this file problem because the file is corrupt

Hi me name is Luis Diego and im working in a dashboard.
The first time i update the file was ok. After that the file start to send me the next message:
"Crystal Xcelsius is unable to load this file. The file may be corrupt or have features cannot be supported by this version of Crystal Xcelsius."
I try to open the file in other computers and in that computers the file was open it. All the computers have the professional version 4.5 so do i.
I reinstall the Crystal Xcelsius in my computer because i thought that the problem was a wrong install in the first time. But after i reinstall the software the problem doesnt go away.
So i need the help of someone to fix this.
Thank you for any help that can bring me.
Regards
Luis Diego Sancho Morera

I suggest you purchase a case and have a dedicated support engineer work with you directly:
http://www.sdn.sap.com/irj/boc/gettingstarted
Or
http://store.businessobjects.com/store/bobjects/Content/pbPage.CSC_map_countyselector/pgm.67024400?resid=jFmmLgoBAlcAAALO-iYAAAAP&rests=1278687224728

Safari unable to load nib file?

I have a user who when they click to start Safari the icon bounces once and does not start.
I found the crash log that says this,
5/13/14 2:26:32 PM
com.apple.launchd[68]
([0x0-0x29029].com.apple.Safari[172]) Exited with exit code: 1
5/13/14 2:26:52 PM
Safari[174]
Unable to load nib file: MainMenu, exiting
5/13/14 2:26:52 PM
Safari[174]
Unable to load nib file: MainMenu, exiting
5/13/14 2:26:52 PM
com.apple.launchd[68]
([0x0-0x2a02a].com.apple.Safari[174]) Exited with exit code: 1
5/13/14 2:26:52 PM
com.apple.launchd[68]
([0x0-0x2a02a].com.apple.Safari[174]) Exited with exit code: 1
5/13/14 2:27:37 PM
com.apple.launchd[68]
(0x10a1d0.Locum[180]) Exited: Terminated
I dont know what this means or how to fix it.
We had a power outage when the user was in Safari.
OSX 10.5.8
Safari 5.0.6
Thanks for your help
SS

They need to reinstall Safari : Safari 5.0.6 for Leopard
although other applications & OS components may also have been affected.

Unable to load multiple files to Essbase using MaxL and wildcards

I have multiple data files to load:
Files:
Filename.txt
Filename_1.txt
Filename_2.txt
According to the following link, Essbase is able to load multiple files to BSO databases via MaxL by using wildcards:
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?launch.html
However, when I try to run the following I receive the following error:
MaxL:
import database MyApp.DB data from server text data_file "../../MyApp/Filename*.txt" using server rules_file "L_MyRule" on error append to "\\Server\Folder\L_MyRule.err";
Error:
ERROR - 1003027 - Unable to open file [DB01/oracleEPM/user_projects/epmsystem2/EssbaseServer/essbaseserver1/app/MyApp/DB/../../Filename*.txt].
ERROR - 1241101 - Unexpected Essbase error 1003027.
I can run the following fine without any problem, but this only deals with the first of several files, and I’d rather not hard-code multiple files since the number might vary in the future:
MaxL:
import database MyApp.DB data from server text data_file "../../MyApp/Filename.txt" using server rules_file "L_MyRule" on error append to "\\Server\Folder\L_MyRule.err";
Any ideas? And how about ASO databases?

JamesD wrote:
According to the following link, Essbase is able to load multiple files to BSO databases via MaxL by using wildcards:
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?launch.html
That is the tech ref for 11.1.2.2, are you on 11.1.2.2?
Import Data
11.1.2.2 - http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?maxl_imp_data.html
11.1.2.1 - http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref_1112100/frameset.htm?maxl_imp_data.html
Cheers
John
http://john-goodwin.blogspot.com/

HTML object unable to load js file

I am using a html object to load a wysiwyg editor in an air app as follows:
<mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml">
     <mx:String id="text">
    <![CDATA[
        <html xmlns="http://www.w3.org/1999/xhtml">
        <head>
            <script type="text/javascript" src="com/company/editor/editor.js"></script>
        </head>
        <body>
            <script type="text/javascript">
                var editor = new Editor("{name}", "{width}", "{height}", "{toolbar}", "{value}");
                editor.Create()
            </script>
        </body>
        </html>
    ]]>
    </mx:String>
     <mx:Script>
        <![CDATA[
          private function htmlInit():void {
                text = text.replace("{name}", this.name);
                text = text.replace("{width}", this.width);
                text = text.replace("{height}", this.height);
                if (this.content == null) {
                    // for some reason there are times that at this stage content is null instead of a blank string
                    // even though I have set it to a blank string when intialized.
                    this.content = "";
                text = text.replace("{value}", (this.content.split("\n").join("")).split('"').join('\\"'));
                text = text.replace("{toolbarSet}", this.toolbarSet);
                _tmp = text;
                this.invalidateProperties();
            private var _tmp:String;
            override protected function commitProperties():void{
                if(_tmp){
                    html.htmlText = _tmp;
                    _tmp = null;
                super.commitProperties();
        ]]>
     </mx:Script>
     <mx:HTML id="html" creationComplete="htmlInit()" width="100%" height="250"/>
</mx:Canvas>
The problem I have is that if I have the application compiling the air package for flash 10.x.x (which is the default) it doesn't find the editor.js file and therefore "new Editor(...)" goes undefined and the page doesn't work. If I then override the "target-player" option to 9.0.28 everything works.
Of course the editor.js file is in the correct subdirectory of the air package which corresponds to the entry in the signature.xml.
Any ideas of the cause and a way to get this to load in flash 10?
Thanks in advance
Matthew

Hi Praveen,
thats exactly what am i doing ,
File txtResource = new File("C://yourfile.txt");
if (txtResource.exists()) {
//Do your logic here
BufferedReader in =
                         new BufferedReader(
                              new java.io.FileReader("C:
yourfile.txt"));
But when i read in as
String str=null;
while ((strLine = in.readLine()) != null)
in seems to be null. I am not able to solve this mystery . any ideas please pass me ..
thanks
Also my scheduler is not working as per behaviour . I scheduled it for every5minhour,
every10minhour, ..........every55minhour,everyfullhour .
But i had to restart EP for starting scheduler otherwise its not scheduling (even afer re-deploying) which is taking significant time for me to check any change. Any idea why its happening like ? if u have any idea on how to schedule it for every5min so that i can track changes please let me know.
thanks

How to load falt file masterdata into BCS?

Hi,
I have requirment that i need to load 80 company codes from flat file into BCS masterdata companycode.
I knew how to do it in BW.But i don't know what are all the steps need to taken care while flat file load into BCS.I am new to BCS.
Please some one advise me on this

Hi Prasad,
Master data and hierarchy upload, as an example:
How To Upload Hierarchy and Master Data of FS Items in SAP SEM-BCS Starting With 4.0 by Using Flexible Upload Method.

Unable to load Falt file in our new Upgrade BI 7 system ?

Similar Messages

Maybe you are looking for