Unable to load HP printer driver-Error message!

Hi,
Just wondering if anyone can be of any assistance.
I recently purchased a HP Photosmart 2575 all-in-one printer and installed the necessary software, which said it was successfully installed. However, whenever I boot up the G3 I keep getting the following message 'Unable to load the printer drive, open the applications Get Info dialog and increase the preferred memory size. If this does not help try quitting all other applications or reinstalling the printer software.'
After clicking ok on this message about four times the message goes and I am able to print fine. Just wondering why this is happening. I have increased the memory allocation and also turnt on the virtual memory to see if this makes any difference, but all to no avail. I have also uninstalled and then reinstalled the software to see if this makes a difference, but that didn't help either.
Any help would be greatly appreciated.
Thanks in advance
PS: The printer is connected via ethernet on my router to enable me to print from another machine

Use Techtool Lite or Trash*Desktop (TD may delete Finder comments )to rebuild your desktop w/extensions off. Does a better job than manually & you avoid all the finger gymnatics. You just have to hold down the shift key to shut off extensions.
Restart to turn the extensions back on again.
If you want to rebuild manually, see KB article http://docs.info.apple.com/article.html?artnum=10182 Rebuilding Desktop File and Icon Recovery.

Similar Messages

Help with printer driver error message after Yosemite upgrade

Hi, I have a MacBook Air and just upgraded to OS X Yosemite Version 10.10. Following the upgrade, I am not longer able to print wirelessly at university. When I tried to reinstall the printer drivers, I got the following error message "The file /Volumes/InstallLibraryPrinter/.drivers/bizhub_C364_101.pkg does not exist". I do have access to IT support, but they were stumped by this error too. Do you have any suggestions for how to fix this, so that I can print again? Thank you for your assistance.

Re: Can not print in Preview app
may help - it shows where to download the 10.9 drivers.

Unable to load new filter, get error message

Hello. I have been using Pixel Bender for several months without a problem. I am running CS5 64bit. Today, I tried to add a new filter skinColorFilter and I get an error that NewFilter already exists and cannot be added. I looked in the Pixel Bender Files folder and no such filter exists. This is a link to the screen image of the error I am getting; .
I am able to continue and use all the other filters and do see a NewFilter listed but have no idea where it came from. Any ideas what I can do to resolve this problem...........Ralph

Hello, and thank you for responding. The problem is that there is no NewFilter in the Pixel Bender directory and in fact there is no such file in my entire disk. My first reaction was to delete the filter but couldn't do so as it didn't exist. I have since downloaded other filters that work fine so have decided to give up and live without the skinColorFilter.
Again, thank you for your suggestion.............Ralph

Web Report Viewer error - Unable to load client print control.

Dear All,
We have a problem with Report Viewer print funtionality. Getting the error "Unable to load client print control." on click of Print button.
We tried all solutions posted in web - nothing resolves the issue.
The print works fine when we open the report via a browser. But the same is not working through our application. We have the application installed on the Report server itself and the user has Admin previleges.
Please find below the details
Report control: ReportViewerWebControl.axd
Version: 9.0.30729.4402
SQL server version: SQL Server 2008 R2, 10.50.2500.0 (running on Windows Server 2008 R2 - 64 bit)
Your help on this would be highly appreciated. Please let me know if you need any specific information.
Thanks,
Naga
Nagaraja

Hi, Larry,
Thank you for your answer which remind me and lead me to the resolution. I have struggling on this SQL Server Report Server 2012/Client printing control for
2 days.
I just cannot figure out why it kept prompting non-admin XenApp users for SSRS installation. Thanks for your notes again.
I have 2008 R2 server setup as XenApp server for the publish apps. We published the IE to user to access Web application with SQL 2012 reporting service in
the backend.
In the control environment, users do not have permission to install any software. This SSRS has to be installed as administrator under “Install mode” in XenApp
server.
Yes, 32bit IE works for me but 64bit IE works too.
You just need to ensure which version of IE you’re using to install the SSRS. I’m not aware of using 32bit IE for SSRS installation in server but publish 64bit
IE to client. That’s my mistake.
Thanks again.
JohnnyW2012

Unable to load Client print control

I know this question has been asked and I have read all of the responses. But, I seem to have a unique problem.
I am using Server 2008 r2 sp2 with ie8. And my problem is getting the error Unable to Load Client Print Control on the client machine for reporting services.
The standard answer here is that the RSClientPrint.cab needs to be loaded on the client machine and installed with a click of the print icon with admin rights. I have done that as a administrator and the print icon works fine as an adminstrator.
However, when I log as a non-admin user, that is when I get the error. The rsclientprint.dll shows up in the registry, but it just does not work for a non-admin user.
I have a open ticket with a MSDN tech at Microsoft, but he seems to be at a loss and is not trying very many things that lead me to believe that this can be resolved.
I am wondering if some else out here has had this problem and got it to work.
Thanks for any help.

Hi KeithTexas,
It seems that the non-Administrator users don't have sufficient permissions on the “Downloaded Program Files” folder where the RSClientPrint control is stored. So, please grant to the user:
1.Open C:\Windows, right-click on the “Downloaded Program Files” folder and click “Properties”.
2.Switch to the “Security” tab, click “Edit”.
3.In the “Security” window, click “Add” and add the specific user to the list.
4.Check the “Allow” box for “Read & execute” permission and click “OK”.
Regards,
Mike Yin
TechNet Community Support

Windows 7 64 bit / Server 2012 R2 GUI - Type 4 Print Driver error "Cannot connect to the Printer" 0x00000002

Hello, We have multiple Server 2003 Print server and are working on testing a Server 2012 print server. We have run into an issue where a PRINTER (type 4, normal) works with our Windows 7 32 bit clients, Windows 8.1 64 bit clients and the
2012 R2 server, but when trying to install to a windows 7 64 bit clients using \\SERVER\PRINTER we are getting the above message. (The printer is not offered currently in the directory).
I have been scouring the Google and Bing and have yet to find a satisfactory description that matches this issue. Nor have I found other information that resolve this issue. Like, blaming this on the spooler or DLL fixes or Reg hacks (applied
on the client side).
Specifically, we have used the native 2012 R2 drivers "Ricoh Class Driver", "HP LaserJet 4240 PCL6 Class Driver" and "Xerox Phaser 6120 Class Driver"
If I use a Type 3 driver from Xerox I am able to print from the Windows 7 64 bit client to the print device, but I was hoping to get all of my clients onto 1 driver. I understand that I might be able to use some sort of WMI filtering in our GPO
deployments for the Windows 7 64 bit clients when we go live but this sort of <gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="55af8faf-887d-4ea5-9032-7c14b199df0f" id="db4a1e65-db1b-4c94-bd84-20ffc96288ce">henky</gs>.
Please, provide some knowledge. Either a solution to this issue or acknowledgement that separate driver will be required. Thank You!!!!!

Hi,
Firstly, please run this "Fix It" tool (Full mode) to reset the print splooer and driver:
You experience Print Spooler error messages after installing or upgrading a Third-Party print driver
http://support.microsoft.com/kb/2793718
And then follow this guide:
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/Windows_Server_2012/A_11509-Windows-2012-server-setup-print-server-for-both-32bit-64bit-OS-clients-how-to.html
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support

Photosmart C4599 w. iMac OS 10.6.8 won't print. Error message "pipe broken" gone; still wont print

Printer would not print. The error message: "Pipe broken. printer cartridges can't move, Open door and release cartridges." However, when I opened the door they moved to the left and out of sight; I didn't see a broken pipe. When I closed the door, they moved back to the right. Did this several times, installed a new black cartridge because mine was low, got a message to align printer, which I did. Printer printed the alignment sheet, which I then scanned in and learned alignment was OK. Printer still did not print although error message had disappeared. Then I followed all of the steps in HP's troubleshooting support (all of which I'd done on my own before) Got a message Printer Ready, but printer still doesn't print. I tried some other files too, in case that one was corrupted in some way.
I just tried again - with a new file.No success. New error message: Unable to connect with printer; will try in 30 seconds. All lights on the printer are fine, including the wireless light.
Can someone help? Many thanks.

Printer would not print. The error message: "Pipe broken. printer cartridges can't move, Open door and release cartridges." However, when I opened the door they moved to the left and out of sight; I didn't see a broken pipe. When I closed the door, they moved back to the right. Did this several times, installed a new black cartridge because mine was low, got a message to align printer, which I did. Printer printed the alignment sheet, which I then scanned in and learned alignment was OK. Printer still did not print although error message had disappeared. Then I followed all of the steps in HP's troubleshooting support (all of which I'd done on my own before) Got a message Printer Ready, but printer still doesn't print. I tried some other files too, in case that one was corrupted in some way.
I just tried again - with a new file.No success. New error message: Unable to connect with printer; will try in 30 seconds. All lights on the printer are fine, including the wireless light.
Can someone help? Many thanks.

Did recent recommended update cause incompatibility with HP printer, causing error message and printer to print blank pages?

did recent recommended update cause incompatibility with HP printer, causing error message and printer to print blank pages?

Why not contact HP tech support for assistance since they make the printer. While on their site you can look for an updated printer driver. Otherwise, try deleting the current installed driver, reset the print system, then reinstall your printer's driver.
Mac OS X- How to reset the printing system

Unable to download epson printer driver

I am unable to download epson printer driver for rx580. Exe files not supported?
other than boot camp and suggestions?

Need a driver for Mac or Windows?
For OS X v10.9 Mavericks > http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=72106&infoType=Down loads
Or here > OS X: Printer and scanner software available for download
.exe files are Windows only.

Unable to load time source driver sntp

Hi ,
I added sntp client script in ni-rt.ini file. but i am getting the following error. Do i have to install something. if sowhat is the driver needs to be installed.
"unable to load time source driver"
thank you,
Ranjith

Hi,
I need to sync RT PXI chassis time with remotely located unix PC which is running NTP server.
Any help would be appriciated.
Ranjith

Unable to load the following resource: Error: too many columns- form won't

Hi ..
Can you please suggest on the following error, which i am facing the issue while opening data form in Hyperion Planning 11.1.1.4 .
Unable to load the following resource: Error: too many columns- form won't
Regards,
Vasu

It is something around 256 if I am not mistaken, I dread to think what a form with 700 columns is like to work with.
Cheers
John
http://john-goodwin.blogspot.com/

After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly. I have repeatedly removed and reinstalled Itunes and still have the same problem!!!

After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly.
I also get error code 7 (Windows error 1114), saying itunes wasn't installed correctly. It appears that I am not the only one with this issue. what is wrong with the latest update?? I tried removing Itunes and all of its components and installing it again, but get same errors and i have also tried doing a system restore with the same results

Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly

After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly.
I also get error code 7 (Windows error 1114), saying itunes wasn't installed correctly.
Tried removing Itunes and installing again, but get same errors

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: "One or more components of the HP printing software are corrupted or missing..." Reinstalled software but Mac will not cause printer to print. My MacBook Pro works fine with same wireless printer.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Unable to activitate IMessage and Facetime - error message "Imessage activiatation could not sign in please check your network connection and try again

Unable to activiate Imessage and Facetime - error message: imessage activation could not sign in please check your network connection and try again

FaceTime, Game Center, Messages: Troubleshooting sign in issues

Unable to load HP printer driver-Error message!

Similar Messages

Maybe you are looking for