Unable to load itmsp into application loader

I am unable to open prepared itmsp package in itunes connect application loader. Of course, I have two logins and it offers to let me switch accounts. I switch accounts OK...but when I want to open using that account, I can't open with that account either. I can login everywhere but there. I set my router to allow access to the ports. My itmsp file is 65Mb. I waited for over half an hour for it to load before forcing quit. Anybody have any ideas?

I guess Apple decided to hiccup and I was able to log in. This was not the first time I tried this procedure, but this is how it happened. I was not able to log in after the export from iBooks Author. I closed iTunes Producer and then opened it through Launchpad. I logged in with the account that is set up for the book, selected open package, and, I'll be danged if it didn't open this time. Unbelievable... I don't think it is what I did. I think Apple hiccuped or cleared her throat.

Similar Messages

Host: Unable to load application configuration + wrong install version on download

i am using 64 bit windows 7 ... when unable to playing video, it redirects me to the adobe download pages to get flash player ... the page says i am about to download flashplayer for win7 64 bit, of 9MB approximately, but the file i get has name "install_flashplayer11x32_mssd_aih.exe" (NOTE THE NUMBER 32) and this file just wont install it ends with error message: HOST: Unable to load application configuration ...
By google i found also file install_flashplayer11x64_mssd_aih.exe (NOTE THE NUMBER 64) ... this file runs the install, i get the final screen saying "installation completed" but after clicking the "finish" button i get an error message saying "an error occured while sending a command to the program" ...
I am just getting mad ... its 3 days i am trying to figure aout this problem ...
i also tryed files as "install_flash_player_11_plugin.exe" , "install_flash_player_11_plugin.msi" , "install_flash_player_11_active_x.exe" and "install_flash_player_11_active_x.msi" ... those files actually proceeds with the install, but at the end, the videos are still not displaying ...
When i am checking the plugins statuses in my firefox addons manager, it says Shockwave Flash is all right ...
The precedent version of flash player was working just fine, i do not understand why you must make such a mess every 2 months ...
How do i get work this?

yes, the pages is http://get.adobe.com/flashplayer/
the page says:
Adobe Flash Player 11.3.300.257 (9.36 MB)
Your system: Windows 64-bit , English, Firefox
but when i click the "Download now" button i get the file named "install_flashplayer11x32_mssd_aih.exe" (NOTE THE NUMBER 32) which wont start and after few seconds i get the message "HOST: Unable to load application configuration"
but finaly i solved the problem ... i just installed the file found by google on some private page "install_flashplayer11x64_mssd_aih.exe" (NOTE THE NUMBER 64)
(the page is here: http://www.ziddu.com/download/16693235/install_flashplayer11x64_mssd_aih.exe.html)
and after that i disabled the protected mode of flashplayer by adding a line in the cfg file
the howto is here: http://forums.adobe.com/thread/1018071
i must say its quite shameful one must get this torture to have movies playing on websites ... this cant happen at open source stuf, at least not for 3 days ...
and being already here and complaining, i must say also (i hope some adobe emploee will read this) i am quite disgusted (and i believe not only me) by adobes bad habit to provide other software than flashplayer, when they include mcafee antivir into the install ...
it is literally taking the user as a stupid one ...
if i will need an antivir, i will look for it ...
i just hate when some society tries to infiltrete in my comp some crap software counting on possibility that at the download i will not pay enough attention
its just ridiculous and shameful behavior

Unable to load Database Error for one of the BSO Application.

Hello Everyone,
We have one Production Issue like suddenly the an Application Fiji while should be running was stopped. When i tried to restart it its showing Error.
gvw3086-v.atlanta.hp.com:1423.Fiji Start application August 28, 2013 8:32:24 PM SGT Failed
Error: 1002141 Unable to load database [Arirang], error code [1019038]
gvw3086-v.atlanta.hp.com:1423.Fiji.Consol Start database August 28, 2013 8:33:30 PM SGT Failed
Error: 1002141 Unable to load database [Arirang], error code [1019038].
I checked the Log but not sure it correct or not i see this Error message.
[Wed Aug 28 11:33:48 2013]Local/Fiji///7944/Info(1002089)
RECEIVED ABNORMAL SHUTDOWN COMMAND - APPLICATION TERMINATING
But i also saw this error before but the application use to start automatically but this time it did not.
can anyone help me on this.
Regards,
Naveen

Hi,
As i mentioned above its only for one Application Fiji. For a temporary Solution we tried to restart the Hyperion Services. But this did not work. One of the the Hyperion Service HyPService(not sure of the exact name). did not restart. So we have done a a fail over to other node and now the Fiji apps is running. But i don't think so what we have done is the correct fix for the solution. Have any one faced this problem.
Hi John,
Which Doc ID you mean to refer me is that the doc which comes with the Essbase Software.
Regards,
Naveen

Application was unable to load database

I have a RoboHelp 9 project that I left open on my computer overnight and microsoft updates ran causing my computer to restart. When I try to open my RoboHelp 9 project, i get the following error:
Open project was cancelled or the application was unable to load database for "C:\CODE\HELP\HELP.CPD"
How can I correct the CPD file without starting over?

Hi there
Just delete the CPD and re-open the project. When RoboHelp sees it missing, it will bake up a fresh one to use and all should then be well.
Cheers... Rick

"open project was cancelled or the application was unable to load database for..."

I'm doing a project for my Professional Writing course and I
have to use RoboHelp to create an online help document. The
professor provided templates for us to use but when I go to open
the project file I get the following error: "open project was
cancelled or the application was unable to load database
for....(then the directory)"
I know the project file isn't corrupted because the members
of my class are using the same one without issue. I tried
re-downloading the file, I also re-installed the program itself,
still with no luck. I'm using a Trial Version of RoboHelp 6.0 .
The only other suggestions I have seen are that I don't have
edit perms for the system, but it's my personal laptop and I have
full admin privs. I thought at first that the folder was read-only,
but when I opened it up all it displays is the little green box in
the checkbox (which doesn't mean the folder is read-only, it's just
some stupid windows default, it's only read-only if the box is
actually checked). I tried making the entire directory read-only
and then turn it off but still get the same error.
Any suggestions?

There's a topic on my site about Opening Projects that
includes the method of deleting the CPD and XPJ files but I didn't
cover that as the project is good for everyone else. Anything is
worth a try at the moment though.
Another thing to try is to rename the course folder, then
create a new folder with the same name plus all sub folders. Then
move the files across. That will ensure the folder properties are
good and not read only. Yes I know what you said but again anything
is worth a try.
Also, in the last post you are saying the directory is not
read-only. I assume the files are all good?
Ref my previous post, is it the case that now you are getting
an error before the original error would have popped up?

Open project was cancelled or application was unable to load database for pathname

My pc is installed with Robohelp 3x. Recently I shifted the
pc from one room to anther. Now when I attempt to open my existing
workable solution, it give me the following message: "Open project
was canceled or application was unable to load database for
<pathname>". Do I need to call for Robohelp technical
support? If yes, can someone provide me the toll free number?
Can someone pls advise?

Thanks Peter, managed to get in through the link you've
given. I seriously doubt it has anything gotta do with a corrupted
project. I have 2 working projects last week but they can no longer
be opened this week.
I tried even to created an empty project from scratch. It was
created successfully but when I reopen the project, it shows the
same error message.
Could there have been other possibilities or ways which I can
troubleshoot?
*puzzled*

Application hang for long time (unable to load)

hi and a very good day to all..
i am a new user of J2ME and i am currently using Sun Wireless Toolkit to run a sample program. But, there are some error occur when i open it from the Open Project in Sun Wireless Toolkit. Once i click the launch button on the emulator, it will show the graphic but with a statement 'Please Wait'. it seems like my application is going happen to hang for quite a long time (i even can't open it at all). it happen every time i open my project and i unable to load my program successfully. i want 2 ask, is it because of teh coding? or my pc? or the Sun Wireless Toolkit itself? i never change/edit the coding, since this the sample application of Mobile Compass i downloading from the internet.
there are bundle of code in my application (single application)..but the error 'Please Wait' basically come from 1 of the coding. i'll show it below:
**THE CODE**
package org.qcontinuum.compass;
import javax.microedition.lcdui.*;
import java.util.*;
abstract public class Progress extends Form implements CommandListener, Runnable {
private Displayable mParent;
private Command mCancelCommand;
private Thread mThread;
// private Timer mTimer;
public Progress(String title, Displayable parent) {
super(title);
mParent = parent;
append(new StringItem(null, "Please wait...\n"));
addCommand(mCancelCommand = new Command("Cancel", Command.CANCEL, 0));
setCommandListener(this);
mThread = new Thread(this);
public void start() {
mThread.start();
abstract public void run();
public void commandAction(Command c, Displayable d) {
if (c == mCancelCommand) {
Compass.display(mParent);
p/s: is it the above error related to java.lang.NullPointerException? this is because, with unexpected situation, suddenly the compass program able to download successfully (only sometime), but still it give some error like below, and i still can select the Time Zone for my destination chosen from the given map.
java.lang.NullPointerException
     at java.io.DataInputStream.read(+4)
     at java.io.DataInputStream.readUnsignedShort(+4)
     at java.io.DataInputStream.readUTF(+6)
     at java.io.DataInputStream.readUTF(+4)
     at org.qcontinuum.compass.TimeZone.load(+6)
     at org.qcontinuum.compass.TimeZone.<init>(+9)
     at org.qcontinuum.compass.TimeZone.getZones(+36)
     at org.qcontinuum.compass.LocationTimeZone.<init>(+89)
     at org.qcontinuum.compass.LocationMap.locationSelected(+22)
     at org.qcontinuum.compass.MapCanvas.moveImage(+282)
     at org.qcontinuum.compass.MapCanvas.keyPressed(+22)
     at javax.microedition.lcdui.Canvas.callKeyPressed(+19)
     at javax.microedition.lcdui.Display$DisplayAccessor.keyEvent(+198)
     at javax.microedition.lcdui.Display$DisplayManagerImpl.keyEvent(+11)
     at com.sun.midp.lcdui.DefaultEventHandler.keyEvent(+127)
     at com.sun.midp.lcdui.AutomatedEventHandler.keyEvent(+210)
     at com.sun.midp.lcdui.DefaultEventHandler$QueuedEventHandler.handleVmEvent(+114)
     at com.sun.midp.lcdui.DefaultEventHandler$QueuedEventHandler.run(+57)
can someone help me on this. i really need the answer for this solution. i am still new and in the process of leaning. Thanks a lot and hope all of u can help me. May God bless u. The reference for the above sample program is at http://http://qcontinuum.org/compass/index.htm
Regards,
Miss Iera

Hi,
Do you have variable replaced by another query? If that is case, you will get performance issue, when the prequery is runnig when call var screen.
Do you have variable replaced by authorization? If that is case, for the user will complicated authroization, it will take some time to fill it.
In general, when the variable screen is calling, have you check in sm66, what is the work process doing? In RSRT->run this query with statistics, which part takes most time?

Unable to load application configuration?

All of a sudden, a couple of weeks ago, adobe flash stopped working in Internet Explorer 10. I've gone through all the steps I can find on the forum to try to get it
to load. I even uninstalled it and the plug in for firefox, but it still wouldn't download, even directly. The error message that boinks and shows up as the exe file is installing it is:
Unable to load application configuration.
I'm running windows 7 pro 64 bit, service pack 1
Internet Explorer 10, 10.0.9200.16635 v 10.0.7
Adobe Flash version is gone, now that I uninstalled it to try to install, but was trying to install the update that it alerted me to, that is version 11.8.800.94, I think.
I went away from IE when there was no adobe flash for 64 bit, but came back and have enjoyed it. I see others have had similar problems, seemingly around installing an update.
Thanks for anyone's help.

Download and run the offline installers from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header (nder the heading Progress bar hangs...).

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Unistall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

Unable to load catalog in CRS application. Indexing is failed

Unable to load catalog in CRS application, Indexation failed: Below is the error msg
**** Error /atg/dynamo/service/jdbc/JTDataSource Unable to connect to data source because of SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_RMERR start() failed on resource 'ATGProductionDS_base_domain': XAER_RMERR : A resource manager error has occured in the transaction branch
**** Error Mon Apr 21 10:35:29 IST 2014 1398056729516 /atg/dynamo/service/jdbc/JTDataSource weblogic.transaction.internal.ResourceAccessException: Transaction has timed out when making request to XAResource 'ATGProductionDS_base_domain'.
**** Error /atg/dynamo/service/jdbc/JTDataSource at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:670)
**** Error /atg/dynamo/service/jdbc/JTDataSource at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1230)
**** Error /atg/dynamo/service/jdbc/JTDataSource at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1164)
Caused by: weblogic.transaction.internal.TimedOutException: Transaction has timed out when making request to XAResource 'ATGProductionDS_base_domain'.
**** Error /atg/dynamo/service/jdbc/JTDataSource at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:673)
**** Error /atg/dynamo/service/jdbc/JTDataSource
In Dyn Admin "atg/commerce/search/ProductCatalogOutputConfig" is failed
"atg/commerce/endeca/index/CategoryToDimensionOutputConfig" is failed

This issue is related to weblogic transaction timeout.
Can you increase the weblogic domain transaction timeout?
By default it is 30 sec, increase to 600
Refer Domain --&gt; Configuration --&gt; JTA to increase timeout.
Peace
Shaik

Error "Unable to load word breaker for locale 0. Error code 8007007e." with search service application.

I recreate the Search service application and the default Content source stayning in the 'Recovering' status.
The log give multiple error 'Unable to load word breaker for locale 0. Error code 8007007e.'
The default language is English and the reference in registry for word breaker dll is naturallanguage1.dll but I found only the naturallanguage6.dll.

Hi,
For your issue, check your current language settings and ensure that search supports the current language.
On the SharePoint Server open Registry Editor (Start -> type “Regedit” and hit enter).
Point to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OfficeServer\14.0\Search\Setup\ContentIndexCommon\LanguageResources\Default\English
Under the registry key for each of the languages there is a value called StemmerDLLPath and WBDLLPathOverride
Updated the registry entry with NATURA~1.dll to NATURA~2.dll
Point to Start -> Administrative Tools -> Services, right click on SharePoint Server Search 14 and click on Restart.
Performed a Full Crawl and wait for the Full Crawl to complete and try searching again.
For more detailed information, refer to the following blogs:
http://blog.ithinksharepoint.com/2008/04/20/a-word-breaker-was-not-found-for-the-given-language-error-when-crawling-content/
http://www.sharepoint2013.me/Blog/Post/175/Word-breakers-in-SharePoint-2013
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Unable to load the user interface-please reinstall the application-Audigy 2 zs Platinum

unable to load the user interface-please reinstall the application---this is the message I get when my pc starts------Someone messing around with my computer tried to delete creative media source player 3 when they saw I had both 3 and 5 in folder and i get this error message every time I start my pc. In addition to this I have lost my EAX and THX consoles and my speaker settings are gone so I cannot adjust my 5. system at all. After I delete that error message when I click on the creative icon is sys tray instead of opening up the creative media player I get the error message--unable to load needed componants. Please reinstall the application. this is media player 3[version 3.32.]. I dont know why during the auto?updates through the last couple of years I have media player 3 in sys tray and if I need version 5 it is in file with 3--start-all programs-creative--any way my pc is a Cyberpower AMD FX-53 using win xp pro-32 bit-- and of course its a OEM product so they tell me the only way to get it to work is use the restoration cd they gave me when I bought the pc and it will revert back to its original state as when purchased. I would lose all my games, music, pictures?ect and would have to start from scratch.[ OR of course back everything up on a portable hard dri've]?It seems like there should be an easier way --hell I might as well buy a new soundcard and it would make it easier. If anyone?has an answer for someone who is not a tech head so I can understand please help !!--thank you in advance for any assistance as it is greatly appreciated. Sorry this message is so long winded, just irritating to have spen so much for a pc and not have the original installation disc.-tried moving to another slot and the fixes I saw posted here with no luck---thank you folks again--Tom

All the issues you guys are talking about have been reported in beta stage of these new drivers. I would say none of them has been fixed yet. The only solution for now is to use previous drivers which work fine or use some modified drivers which fixes some issues, but not all. Your choice.
[url="http://connect.creativelabs.com/windows/Lists/Audigy%20Issues/AllItems.aspx">Bug List[/url]
Message Edited by ronon0 on 08-07-2008 :47 AM

Unable to load LabVIEW VI into TestStand using LV Run Time only

I'm unable to load some of my VIs into TestStand from LabVIEW. I am using:
TestStand 4.2.1
LabVIEW 2010
I have the appropriate patches installed for both TestStand and LabVIEW, and I still get the error.
Attached is a message that I get when I hover over the "!" to explain my error. The VI has the "Simple Error Handler.vi" as part of the build, and when I eliminate this VI from my VI, TestStand then loads correctly.
Thanks,
Eric
Solved!
Go to Solution.
Attachments:
TestStand_LoadError_Hover.png ‏16 KB

This fixed my issue as well. Thank you for posting this. I have repaired LabVIEW 2010 sp1, LabVIEW FPGA, LabVIEW RT, DAQmx, and VISA 5.0. These are not small programs to do repairs on. Even after doing all of these repairs I still had issues with just labview coming up.
Just by clicking on my lv shortcut to run the labview.exe I would get a loading screen for gws_int.vi This was before opening any projects or VI's. Labview was having many issues. Once the loading vi screen went away the standard labview 2010 startup page was present. But this page was dysfunctional. For example if you clicked tools and then options it would just totally crash LabVIEW, no error message or warning.
Many people are suggesting to mass compile to fix this, but that is not an option. If you went to tools>advance>mass compile the same loading vi screen would come up (pic A), but then the mass compile program would have a broken arrow (pic b) I included a image to show people this.
The error list will always pop up, but there are no errors.
I called NI tech support and they suggested that I repair all of my programs starting with the largest programs first. During the repairs I found this forum. I have over 30 different NI modules installed on this machine, I would have been at this for the next two days.
Thank you very much for this.
A good question is why didn't the repairs of these large programs find this, and would any repair of any module have fixed this?
Attachments:
b.png ‏116 KB
a.png ‏46 KB

TS3999 I am unable to load iCloud Outlook add-in into Outlook 10 on a Vista PC

I am unable to load the "iCloud Outlook Add-In" into Outlook 10 on a Vista PC. I periodicall get a note that the add-in will cause Outlook to crash. There is however an add-in loaded that is "iTunes Outlook Add-In". When I first installed iCloud everything updated just fine but as I have add contact and calendar items to either the ios device or the PC nothing has updated. Can someone help me get my iCloud working?

Hey rjgravely!
Here is an article that will help you accomplish this stated goal:
iCloud: Set up iCloud Mail on your devices
http://support.apple.com/kb/ph2621
Thanks for coming to the Apple Support Communities!
Regards,
Braden

I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
1. Make sure that the right volume is selected in the Startup Disk preference pane.
2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
3. Reset the System Management Controller.
4. Reset the PRAM.
5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash.

Unable to load itmsp into application loader

Similar Messages

Maybe you are looking for