Unable to load media core plug in : ImporterAVI and ExporterAVI

Hello, I have been getting a few problems recently and i managed to get rid of some by copying cs5 dlls and files into cs6 but i still have a few errors.
This is what is in my common folder.
has anyone go any ideas how to fix this, when i get through all these errors i cannot load any videos, i have changed the output modual to h.264 and it allows me to import videos..
Thanks.

Never ever copy resource files from older versions into newer ones! Do what it says: Reinstall the program. Run the Creative Suite Cleaner Tool and undo your copy operations. Beyond that the most likely cause for your troubles are the same old CoDec issues, so get rid of any CoDec packs, third-party CoDecs and alternate media players other than VLC. also check your hardware acceleration stuff for audio and video in Windows Media Player's settings...
Mylenium

Similar Messages

Adobe DPS: unable to load media after video montage.

Hi there,
I am currently using Adobe Indesign CS6 with the latest update of the Folio panel and work on a digital magazine in which I imported some videos in different extensions (*.mov and *.mp4).
Everything worked fine on iPad, but everytime I make a video montage using Adobe Premiere Pro CS6, a message error "Unable to load media. Please check your internet connection or try again later" appeared on my iPad screen.
I exported my media from Adobe Premiere in *.mp4 using H.264 codecs for Apple TV/iPad/iPhone, dimension 1280 x 720 and also tried with 1024 x 768, but that didn't work.
Then, I imported my original videos without any montage making on DPS, they work fine. One of the original video has an extension *.mov and the other one *.mp4.
I followed the steps that I read on DPS forums by some users facing the same issue, but that didn't make good results.
So, is there anything I have missed in Adobe premiere Pro CS6 as after making video montage, my iPad always displays the message error? and why each time I use the same two videos without passing through Adobe Premiere, I can play the video without trouble?

I tried both softwares Handbreake and Adobe Media Encoder CS6 to render my final editing but it always failed.
However, I restarted my whole video project using a free easy-to-use video editing software I downloaded from the internet, now it works fine on ipad with *.mov extension.
By the way, Adobe Indesign does not support *.m4v.
Anyway, I will go on trying to figure out what's the flaw in Adobe Premiere Pro.
Thanks anyway _Felipe!

I am unable to recieve media messages via text message and the profile says its not verified. How do i fix this?

i am unable to recieve media messages via text message and the profile in the settings says its not verified. How do i fix this?

MMS is a carrier feature. Contact the carrier to ensure you account is provisioned correctly.

Unable to load dataclass information from sync services and appcrash????

i have an asus u50f seris notebook with windows 7 64 bit operating system as soon as i plug my ipod in i get a message saying mobiledevicehelper has stopped working. under detail the problem event name:APPCRASH application name:Applemobiledevicehelper.exe appers over and over as long as the ipod stays connected then itunes displays a message saying itunes was unable to load dataclass information from sync services reconect or try agian later. i have tried my ipod on a different computer works fine . why wont it work on mine my computer is only a couple months old.

try if any of the suggestions in this thread help.
sometimes it helps to restart the "Apple Mobile Device Service". click here and follow the instructions.
JGG

Itunes Unable to Load Dataclass info from Sync Services and unable to back up.

Community please help.
I am running Windowns 7 and all of a sudden i cannot sync either one of my two iphones or my ipad.
The first error i get states:
"iTunes was unable to load data class information from Sync Services. Reconnect or try again later
After i hit ok i get:
"Itunes could not back up the ipad "<name>" because the backup session failed".
I have tried uninstalling and reinstalling itures.
I tried installing itunes under a guess setting.
I have tried to stop and restart Apple mobile device in control pannel.
I have tried Itunes in safe moder.
I am at a loss, can anyone point me in the right direction?
THANK YOU

I tried the above but no success.
I keep getting :
"iTunes was unable to load data class information from Sync Services. Reconnect or try again later"
followed by
""Itunes could not back up the ipad "<name>" because the backup session failed"."

Unable to load media error when trying to play a video in Sharepoint 2013

My team consistently gets an error when trying to play a video in SharePoint 2013. I can upload it, pick a thumbnail and save it. When anyone else goes to the intranet site and tries to play the video, they get a media failed to load error.
I have tried mp4 and wmv formats. I at first thought it had to do with the codec used in Camtasia to create the video, so I encoded it in Microsoft Encoder to a wmv and it still fails. All of the videos I upload fail for other users. If someone else uploads
a video, I get the error and cannot play the video. If I look at the library in Explorer, the video file is missing but the subdirectories for additional content and thumbnails are present. For the videos I upload and can play but everyone else
gets the error, I see those subdirectories as well as the video file itself.

Result
Protocol
Host
URL
Body
Caching
Content-Type
Process
Comments
Custom
963
404
HTTP
team.hagerman.com
/submissions/Compiled%20Videos/AutoCAD%20-%20Multiple%20Profile%20Icons/AutoCAD%20-%20Multiple%20Profile%20Icons.wmv
13
private,max-age=0; Expires: Tue, 11 Feb 2014 21:58:26 GMT
iexplore:15076
[#956]
Request:
GET /submissions/Compiled%20Videos/AutoCAD%20-%20Multiple%20Profile%20Icons/AutoCAD%20-%20Multiple%20Profile%20Icons.wmv HTTP/1.1
Accept: */*
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/7.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; .NET4.0C; .NET4.0E; Zune 4.7; AskTbAD2/5.15.4.23821)
Host: team.hagerman.com
If-Modified-Since: Wed, 26 Feb 2014 19:07:33 GMT
If-None-Match: "{8A07B719-341D-4BEE-BD61-F364394C3E98},2"
DNT: 1
Connection: Keep-Alive
Cookie: databaseBtnText=0; databaseBtnDesc=0; stsSyncAppName=Outlook; stsSyncIconPath=%2F%5Flayouts%2F15%2Fimages%2Fmenuoutl%2Egif; __utma=95027589.2092965952.1364844931.1393356332.1393429315.524; __utmz=95027589.1393268194.522.68.utmcsr=SilverpopMailing|utmccn=TE%20-%20St.%20Louis%20MCAD%20(12)|utmcmd=email;
__qca=P0-1092250856-1367500502168; km_ni=joyvoltenburg; km_uq=; km_lv=x; km_ai=joyvoltenburg; grvinsights=3a306cce826491ec77d9a195a63f57f2; __avc_32508=045-8a-724d-ee8f13e900daac4; Persistent_id_HgixPXFYDDdj0w=0C78ABCB2F34:1392388341; optimizelySegments=%7B%22178845731%22%3A%22false%22%2C%22178855892%22%3A%22ie%22%2C%22179190226%22%3A%22direct%22%7D;
optimizelyEndUserId=oeu1379624626946r0.0872463653920379; optimizelyBuckets=%7B%7D; __utmc=95027589; StorefrontCookie=cmen-US=en-US&bm=US; WSS_FullScreenMode=false; Ribbon.Read=1920886|-1|0|-687423497; Ribbon.DocLibListForm.Edit=682788|-1|0|1882364446;
Ribbon.Library=1920886|-1|710|-687423497; Ribbon.Permission=1920886|-1|1725|1598418443; Ribbon.ListForm.Display=1920886|-1|1620|-1006461573; previousLoggedInAs=; loginAsDifferentAttemptCount=
Authorization: Negotiate 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
Response:
HTTP/1.1 404 NOT FOUND
Cache-Control: private,max-age=0
Content-Length: 13
Expires: Tue, 11 Feb 2014 21:58:26 GMT
Server: Microsoft-IIS/7.5
X-SharePointHealthScore: 0
Public-Extension: http://schemas.microsoft.com/repl-2
SPRequestGuid: 1826789c-0589-80e7-31cd-3c1038ea29f6
request-id: 1826789c-0589-80e7-31cd-3c1038ea29f6
X-FRAME-OPTIONS: SAMEORIGIN
SPRequestDuration: 1132
SPIisLatency: 1
WWW-Authenticate: Negotiate oYGyMIGvoAMKAQChCwYJKoZIgvcSAQICooGaBIGXYIGUBgkqhkiG9xIBAgICAG+BhDCBgaADAgEFoQMCAQ+idTBzoAMCAReibARqhLWFbGbcecrn5kQ/ScMjrsqhag2XcrWQQ7g0Mb6ilZ+kFIPC6XJsH7+ldzTk3eQF/4C1f2nzJxENlP2M+75fOiRZGU/r0nvjgX5MdswmrBQkRg8iqKwcwJeE/3/P7nLWVitRs21hnB19oQ==
Persistent-Auth: false
X-Powered-By: ASP.NET
MicrosoftSharePointTeamServices: 15.0.0.4420
X-Content-Type-Options: nosniff
X-MS-InvokeApp: 1; RequireReadOnly
Date: Wed, 26 Feb 2014 21:58:25 GMT

Unable to load camera raw plug-in update.

My Photoshop version is 12.0.4 x64 - when I run update it shows "up to date".
When I try to install the plug-in it tells me to contact support.
Why can't I install the updated plug-in?

What version are you installing?
You can only install up to 6.7 in CS5. Beyond that you need the free raw to DNG converter.
Do you own a PC or Mac?

ITunes was unable to load provider data from sync servicesnnect and try again

If you get is problem as I did after updating iTunes to the latest version 10.4.1, the solution that worked for me was, I unnstalled Quicktime first, then Apple Mobile Device Support, then Apple Application Support, then Apple Software Update and finally iTunes. Go to iTunes and download the earlier version 10.3.1.
This worked for me and i will not be updating iTunes, so make sure Automatically update is turned off. I hope this work for anyone with this poblem. I have a iPod Touch and using Windows 7 Home Premium 64-bit.

OK
Here's what I did:
1. Copy all of the contents in C:\Program Files\Common Files\Apple\Apple Application Support to C:\Program Files\Common Files\Apple\Mobile Device Support folder, overwriting anything it if asked.
2. Rright-click on the Computer icon on your desktop (or in the start menu) and select Properties. Click on Advanced System Settings. Then clik on Environment Variables. If you don't have a user variable called PATH, click New... and add it, or select it and click Edit...
Now, add to the beginning of the user PATH the following two directories:
c:\program files\commmon files\apple\Apple Application Support
c:\program files\commmon files\apple\Mobile Device Support
Be sure to put a semi-colon (;) between the two directories.
Click OK three times to save your settings.
Step #2 might require a reboot.
After these 2 steps sync works again (touch wood).
Seems that sometimes there's an additional possibility (which I didn't perform):
If you are still having problems after following these steps, it's possible another application uses one of the same DLLs as iTunes (but a different version) and Windows is finding it in the PATH before the Apple file paths added above. You can check this by opening a DOS command prompt window and executing the following commands:
where libxml2.dll
where sqlite3.dll
where libtidy.dll
Examine the pathnames listed by these commands. If any paths are listed before the ...\Common Files\Apple\... paths, you'll want to remove those paths from the PATH environment variable.

After Effects Hanging on Initializing Media Core

I downloaded the trial for After Effects CC 2014 to make sure it would work on my computer, but when I try to open it the start up screen hangs at initialing media core. I made sure that After Effects was allowed through the firewall, but it's still not working. I want to buy it, but I can't if it won't start. Please help!

I can't promise this will help and I have email from Adobe support that specifically says this won't work and isn't the problem. So if you want to try this, it's just working advice from some shlub who wants the software to work and doesn't care whose feelings are hurt. This response fixes all versions of After Effects and Premiere Pro in the CC and CC 2014 series. The file ExporterAVI.prm is bad. It has had a flaw since around 2013. Now you can fix this taking no chance with your computer or installation, so if you follow this carefully you'll do nothing to hurt your setup and if it doesn't work, just change it back.
Each application has it's separate copy in it's separate folder, so just go to C:\Program Files\Adobe\Adobe After Effects CC\Support Files\(Media Core Plug-ins)\Common
Find the file called ExporterAVI.prm and rename it (I always just rename it to ExporterAVI.prmold
Now run After Effects CC. If it loads, you found the problem. If it doesn't rename it back to it's original name and, no harm, no foul.
If it does load, know that you can't export an AVI file. You need a PRM file that works. I always keep one saved. It will work for the CC version and the CC 2014 version. It is from an old copy of the original CC version of both programs.t is 159Kb and dated 8/20/2013. The properties detail tab actually says it was created on 3/27/2012. Every time an update come out that affects this, it will stop working, so just rename it again and put back in the old file and you'll get full functionality. I've had to use it six time since the update after 8/2013, but I have full functionality of all four versions of both programs, but it won't work with the current version of ExporterAVI.prm. So far, that means every time it loads an update, I have to fix the file in the After Effects CC, After Effects CC 2014, Premiere Pro CC and Premiere Pro CC 2014. The same file is used in Prelude, Encore and Media Encoder, but I don't use those programs. so I don't know if they freeze up or not.
Also look at the last entry in your plugin loading.log file, it should say something like:
Loading E:\Win8\Program Files\Adobe\Adobe After Effects CC 2014\Support Files\(Media Core plug-ins)\Common\ExporterAVI.prm
Invalid registry entry found so the plugin will be loaded from disk.
Loading from disk...
and then the log ends and the program freezes.
p.s. If you don't have a copy of the old version of the file, call Adobe, don't ask me - I can't give copies of it to anyone, I just make them because I keep backups before every update.

[Solved] Problem with Xorg, unable to load the right keymap

Hi, people,
I recently installed arch on a desktop, but there is a problem installing X: for whatever reason, Xorg seems unable to load the correct keymap (fr-latin9) and instead, loads the default one.
I can see what seems to be the problem in the Xorg logs, but I actually absolutely don't know how to solve it. Here my /var/log/Xorg.0.log
root@kgentoo keikoz # cat /mnt/tmp/var/log/Xorg.0.log
[ 9.900]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 9.900] X Protocol Version 11, Revision 0
[ 9.900] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 9.900] Current Operating System: Linux kdesktop 3.4.9-1-ARCH #1 SMP PREEMPT Wed Aug 15 18:59:31 CEST 2012 x86_64
[ 9.901] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7d2d3ed4-6903-4845-b70d-9462f52f4329 ro quiet
[ 9.901] Build Date: 27 August 2012 08:04:39AM
[ 9.901]
[ 9.901] Current version of pixman: 0.26.2
[ 9.901] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.901] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.901] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 26 16:32:35 2012
[ 9.950] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 9.967] (==) No Layout section. Using the first Screen section.
[ 9.967] (==) No screen section available. Using defaults.
[ 9.967] (**) |-->Screen "Default Screen Section" (0)
[ 9.967] (**) | |-->Monitor "<default monitor>"
[ 9.969] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.969] (==) Automatically adding devices
[ 9.969] (==) Automatically enabling devices
[ 10.002] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 10.002] Entry deleted from font path.
[ 10.006] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 10.007] Entry deleted from font path.
[ 10.007] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 10.007] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 10.007] Entry deleted from font path.
[ 10.007] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 10.007] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 10.007] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.007] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.007] (II) Loader magic: 0x7c8b00
[ 10.007] (II) Module ABI versions:
[ 10.007] X.Org ANSI C Emulation: 0.4
[ 10.007] X.Org Video Driver: 12.1
[ 10.007] X.Org XInput driver : 16.0
[ 10.007] X.Org Server Extension : 6.0
[ 10.008] (--) PCI:*(0:3:0:0) 10de:0141:107d:200d rev 162, Mem @ 0xcc000000/67108864, 0xd0000000/268435456, 0xcb000000/16777216, BIOS @ 0x????????/131072
[ 10.008] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10.008] (II) LoadModule: "extmod"
[ 10.018] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 10.033] (II) Module extmod: vendor="X.Org Foundation"
[ 10.033] compiled for 1.12.4, module version = 1.0.0
[ 10.033] Module class: X.Org Server Extension
[ 10.033] ABI class: X.Org Server Extension, version 6.0
[ 10.033] (II) Loading extension MIT-SCREEN-SAVER
[ 10.033] (II) Loading extension XFree86-VidModeExtension
[ 10.033] (II) Loading extension XFree86-DGA
[ 10.033] (II) Loading extension DPMS
[ 10.033] (II) Loading extension XVideo
[ 10.033] (II) Loading extension XVideo-MotionCompensation
[ 10.033] (II) Loading extension X-Resource
[ 10.033] (II) LoadModule: "dbe"
[ 10.033] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 10.034] (II) Module dbe: vendor="X.Org Foundation"
[ 10.034] compiled for 1.12.4, module version = 1.0.0
[ 10.034] Module class: X.Org Server Extension
[ 10.034] ABI class: X.Org Server Extension, version 6.0
[ 10.034] (II) Loading extension DOUBLE-BUFFER
[ 10.034] (II) LoadModule: "glx"
[ 10.034] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.016] (II) Module glx: vendor="NVIDIA Corporation"
[ 11.016] compiled for 4.0.2, module version = 1.0.0
[ 11.016] Module class: X.Org Server Extension
[ 11.016] (II) NVIDIA GLX Module 304.37 Wed Aug 8 20:16:03 PDT 2012
[ 11.016] (II) Loading extension GLX
[ 11.016] (II) LoadModule: "record"
[ 11.016] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 11.026] (II) Module record: vendor="X.Org Foundation"
[ 11.026] compiled for 1.12.4, module version = 1.13.0
[ 11.026] Module class: X.Org Server Extension
[ 11.026] ABI class: X.Org Server Extension, version 6.0
[ 11.026] (II) Loading extension RECORD
[ 11.026] (II) LoadModule: "dri"
[ 11.026] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 11.049] (II) Module dri: vendor="X.Org Foundation"
[ 11.049] compiled for 1.12.4, module version = 1.0.0
[ 11.049] ABI class: X.Org Server Extension, version 6.0
[ 11.049] (II) Loading extension XFree86-DRI
[ 11.049] (II) LoadModule: "dri2"
[ 11.050] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 11.050] (II) Module dri2: vendor="X.Org Foundation"
[ 11.050] compiled for 1.12.4, module version = 1.2.0
[ 11.050] ABI class: X.Org Server Extension, version 6.0
[ 11.050] (II) Loading extension DRI2
[ 11.051] (==) Matched nouveau as autoconfigured driver 0
[ 11.051] (==) Matched nvidia as autoconfigured driver 1
[ 11.051] (==) Matched nv as autoconfigured driver 2
[ 11.051] (==) Matched vesa as autoconfigured driver 3
[ 11.051] (==) Matched fbdev as autoconfigured driver 4
[ 11.051] (==) Assigned the driver to the xf86ConfigLayout
[ 11.051] (II) LoadModule: "nouveau"
[ 11.059] (WW) Warning, couldn't open module nouveau
[ 11.059] (II) UnloadModule: "nouveau"
[ 11.059] (II) Unloading nouveau
[ 11.059] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 11.059] (II) LoadModule: "nvidia"
[ 11.060] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11.274] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11.274] compiled for 4.0.2, module version = 1.0.0
[ 11.274] Module class: X.Org Video Driver
[ 11.300] (II) LoadModule: "nv"
[ 11.301] (WW) Warning, couldn't open module nv
[ 11.301] (II) UnloadModule: "nv"
[ 11.301] (II) Unloading nv
[ 11.301] (EE) Failed to load module "nv" (module does not exist, 0)
[ 11.301] (II) LoadModule: "vesa"
[ 11.301] (WW) Warning, couldn't open module vesa
[ 11.301] (II) UnloadModule: "vesa"
[ 11.301] (II) Unloading vesa
[ 11.301] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 11.301] (II) LoadModule: "fbdev"
[ 11.302] (WW) Warning, couldn't open module fbdev
[ 11.302] (II) UnloadModule: "fbdev"
[ 11.302] (II) Unloading fbdev
[ 11.302] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 11.302] (II) NVIDIA dlloader X Driver 304.37 Wed Aug 8 19:54:47 PDT 2012
[ 11.302] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11.303] (++) using VT number 7
[ 11.317] (II) Loading sub module "fb"
[ 11.317] (II) LoadModule: "fb"
[ 11.317] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.330] (II) Module fb: vendor="X.Org Foundation"
[ 11.330] compiled for 1.12.4, module version = 1.0.0
[ 11.330] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.330] (II) Loading sub module "wfb"
[ 11.330] (II) LoadModule: "wfb"
[ 11.331] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11.347] (II) Module wfb: vendor="X.Org Foundation"
[ 11.347] compiled for 1.12.4, module version = 1.0.0
[ 11.347] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.347] (II) Loading sub module "ramdac"
[ 11.347] (II) LoadModule: "ramdac"
[ 11.347] (II) Module "ramdac" already built-in
[ 11.366] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11.366] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 11.366] (==) NVIDIA(0): RGB weight 888
[ 11.366] (==) NVIDIA(0): Default visual is TrueColor
[ 11.366] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11.367] (**) NVIDIA(0): Enabling 2D acceleration
[ 13.308] (II) NVIDIA(GPU-0): Display (BenQ FP93GX (DFP-0)) does not support NVIDIA 3D
[ 13.308] (II) NVIDIA(GPU-0): Vision stereo.
[ 13.311] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 (NV43) at PCI:3:0:0 (GPU-0)
[ 13.312] (--) NVIDIA(0): Memory: 262144 kBytes
[ 13.312] (--) NVIDIA(0): VideoBIOS: 05.43.02.64.68
[ 13.312] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 13.312] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 13.312] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 at PCI:3:0:0
[ 13.312] (--) NVIDIA(0): CRT-0
[ 13.312] (--) NVIDIA(0): CRT-1
[ 13.312] (--) NVIDIA(0): TV-0
[ 13.312] (--) NVIDIA(0): BenQ FP93GX (DFP-0) (connected)
[ 13.312] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): TV encoder: (null)
[ 13.312] (--) NVIDIA(0): BenQ FP93GX (DFP-0): 155.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): BenQ FP93GX (DFP-0): Internal Single Link TMDS
[ 13.312] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13.312] (**) NVIDIA(0): device BenQ FP93GX (DFP-0) (Using EDID frequencies has
[ 13.312] (**) NVIDIA(0): been enabled on all display devices.)
[ 13.312] (==) NVIDIA(0):
[ 13.312] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 13.312] (==) NVIDIA(0): will be used as the requested mode.
[ 13.312] (==) NVIDIA(0):
[ 13.312] (II) NVIDIA(0): Validated MetaModes:
[ 13.313] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 13.313] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 13.314] (WW) NVIDIA(0): Unable to support custom viewPortOut 1280 x 720 +0 +152
[ 13.328] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
[ 13.328] (--) NVIDIA(0): option
[ 13.328] (--) Depth 24 pixmap format is 32 bpp
[ 13.338] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 13.338] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 13.338] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 13.338] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 13.338] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 13.338] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 13.338] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 13.338] (II) NVIDIA(0): Config Options in the README.
[ 13.338] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 13.486] (II) Loading extension NV-GLX
[ 13.541] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 13.541] (==) NVIDIA(0): Backing store disabled
[ 13.541] (==) NVIDIA(0): Silken mouse enabled
[ 13.541] (==) NVIDIA(0): DPMS enabled
[ 13.542] (II) Loading extension NV-CONTROL
[ 13.542] (II) Loading extension XINERAMA
[ 13.542] (II) Loading sub module "dri2"
[ 13.542] (II) LoadModule: "dri2"
[ 13.542] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 13.542] (II) Module dri2: vendor="X.Org Foundation"
[ 13.542] compiled for 1.12.4, module version = 1.2.0
[ 13.542] ABI class: X.Org Server Extension, version 6.0
[ 13.542] (II) NVIDIA(0): [DRI2] Setup complete
[ 13.542] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 13.543] (--) RandR disabled
[ 13.543] (II) Initializing built-in extension Generic Event Extension
[ 13.543] (II) Initializing built-in extension SHAPE
[ 13.543] (II) Initializing built-in extension MIT-SHM
[ 13.543] (II) Initializing built-in extension XInputExtension
[ 13.543] (II) Initializing built-in extension XTEST
[ 13.543] (II) Initializing built-in extension BIG-REQUESTS
[ 13.543] (II) Initializing built-in extension SYNC
[ 13.543] (II) Initializing built-in extension XKEYBOARD
[ 13.543] (II) Initializing built-in extension XC-MISC
[ 13.543] (II) Initializing built-in extension SECURITY
[ 13.543] (II) Initializing built-in extension XINERAMA
[ 13.543] (II) Initializing built-in extension XFIXES
[ 13.543] (II) Initializing built-in extension RENDER
[ 13.543] (II) Initializing built-in extension RANDR
[ 13.543] (II) Initializing built-in extension COMPOSITE
[ 13.543] (II) Initializing built-in extension DAMAGE
[ 13.547] (II) Initializing extension GLX
[ 14.003] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 14.003] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.003] (II) LoadModule: "evdev"
[ 14.004] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.022] (II) Module evdev: vendor="X.Org Foundation"
[ 14.022] compiled for 1.12.3.901, module version = 2.7.3
[ 14.022] Module class: X.Org XInput Driver
[ 14.022] ABI class: X.Org XInput driver, version 16.0
[ 14.023] (II) Using input driver 'evdev' for 'Power Button'
[ 14.023] (**) Power Button: always reports core events
[ 14.023] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 14.023] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.023] (--) evdev: Power Button: Found keys
[ 14.023] (II) evdev: Power Button: Configuring as keyboard
[ 14.023] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 14.023] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14.023] (**) Option "xkb_rules" "evdev"
[ 14.023] (**) Option "xkb_model" "evdev"
[ 14.023] (**) Option "xkb_layout" "fr"
[ 14.023] (**) Option "xkb_variant" "latin-9"
[ 14.076] (EE) Error loading keymap /var/lib/xkb/server-0.xkm
[ 14.076] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[ 14.121] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 14.121] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.121] (II) Using input driver 'evdev' for 'Power Button'
[ 14.121] (**) Power Button: always reports core events
[ 14.121] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 14.121] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.121] (--) evdev: Power Button: Found keys
[ 14.121] (II) evdev: Power Button: Configuring as keyboard
[ 14.121] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 14.121] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 14.121] (**) Option "xkb_rules" "evdev"
[ 14.121] (**) Option "xkb_model" "evdev"
[ 14.121] (**) Option "xkb_layout" "fr"
[ 14.121] (**) Option "xkb_variant" "latin-9"
[ 14.122] (II) config/udev: Adding input device Genius Multimedia Keyboard (/dev/input/event0)
[ 14.122] (**) Genius Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.122] (II) Using input driver 'evdev' for 'Genius Multimedia Keyboard'
[ 14.122] (**) Genius Multimedia Keyboard: always reports core events
[ 14.122] (**) evdev: Genius Multimedia Keyboard: Device: "/dev/input/event0"
[ 14.122] (--) evdev: Genius Multimedia Keyboard: Vendor 0x458 Product 0x708
[ 14.122] (--) evdev: Genius Multimedia Keyboard: Found keys
[ 14.122] (II) evdev: Genius Multimedia Keyboard: Configuring as keyboard
[ 14.122] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input0/event0"
[ 14.122] (II) XINPUT: Adding extended input device "Genius Multimedia Keyboard" (type: KEYBOARD, id 8)
[ 14.122] (**) Option "xkb_rules" "evdev"
[ 14.122] (**) Option "xkb_model" "evdev"
[ 14.122] (**) Option "xkb_layout" "fr"
[ 14.122] (**) Option "xkb_variant" "latin-9"
[ 14.123] (II) config/udev: Adding input device Genius Multimedia Keyboard (/dev/input/event1)
[ 14.123] (**) Genius Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.123] (II) Using input driver 'evdev' for 'Genius Multimedia Keyboard'
[ 14.123] (**) Genius Multimedia Keyboard: always reports core events
[ 14.123] (**) evdev: Genius Multimedia Keyboard: Device: "/dev/input/event1"
[ 14.123] (--) evdev: Genius Multimedia Keyboard: Vendor 0x458 Product 0x708
[ 14.124] (--) evdev: Genius Multimedia Keyboard: Found keys
[ 14.124] (II) evdev: Genius Multimedia Keyboard: Configuring as keyboard
[ 14.124] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input1/event1"
[ 14.124] (II) XINPUT: Adding extended input device "Genius Multimedia Keyboard" (type: KEYBOARD, id 9)
[ 14.124] (**) Option "xkb_rules" "evdev"
[ 14.124] (**) Option "xkb_model" "evdev"
[ 14.124] (**) Option "xkb_layout" "fr"
[ 14.124] (**) Option "xkb_variant" "latin-9"
[ 14.125] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/event5)
[ 14.125] (**) ImExPS/2 Logitech Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 14.125] (II) Using input driver 'evdev' for 'ImExPS/2 Logitech Explorer Mouse'
[ 14.125] (**) ImExPS/2 Logitech Explorer Mouse: always reports core events
[ 14.125] (**) evdev: ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event5"
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Vendor 0x2 Product 0x6
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found 9 mouse buttons
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found relative axes
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
[ 14.125] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
[ 14.125] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Adding scrollwheel support
[ 14.125] (**) evdev: ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 14.125] (**) evdev: ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.125] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 14.125] (II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE, id 10)
[ 14.137] (II) evdev: ImExPS/2 Logitech Explorer Mouse: initialized for relative axes.
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration profile 0
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration factor: 2.000
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration threshold: 4
[ 14.138] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/mouse0)
[ 14.138] (II) No input driver specified, ignoring this device.
[ 14.138] (II) This device may have been added with another device file.
[ 14.138] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 14.138] (II) No input driver specified, ignoring this device.
[ 14.138] (II) This device may have been added with another device file.
[ 14.305] (II) NVIDIA(GPU-0): Display (BenQ FP93GX (DFP-0)) does not support NVIDIA 3D
[ 14.306] (II) NVIDIA(GPU-0): Vision stereo.
[ 14.306] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.306] (**) NVIDIA(0): device BenQ FP93GX (DFP-0) (Using EDID frequencies has
[ 14.306] (**) NVIDIA(0): been enabled on all display devices.)
[ 19.774] (II) NVIDIA(GPU-0): Display (BenQ FP93GX (DFP-0)) does not support NVIDIA 3D
[ 19.774] (II) NVIDIA(GPU-0): Vision stereo.
[ 19.774] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.774] (**) NVIDIA(0): device BenQ FP93GX (DFP-0) (Using EDID frequencies has
[ 19.774] (**) NVIDIA(0): been enabled on all display devices.)
[ 41.273] (II) evdev: Power Button: Close
[ 41.273] (II) UnloadModule: "evdev"
[ 41.290] (II) evdev: Power Button: Close
[ 41.290] (II) UnloadModule: "evdev"
[ 41.293] (II) evdev: Genius Multimedia Keyboard: Close
[ 41.293] (II) UnloadModule: "evdev"
[ 41.300] (II) evdev: Genius Multimedia Keyboard: Close
[ 41.300] (II) UnloadModule: "evdev"
[ 41.303] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Close
[ 41.303] (II) UnloadModule: "evdev"
[ 41.793] Server terminated successfully (0). Closing log file.
The error appear to be where it says
[ 14.076] (EE) Error loading keymap /var/lib/xkb/server-0.xkm
[ 14.076] (EE) XKB: Failed to load keymap. Loading default keymap instead.
This file (server-0.xkm) actually does not exist on the system, BUT: it also does not exist on my others Arch installations and it works fine, without errors.
By the way: here is the keyboard-entry in the /etc/X11/xorg.conf.d/10-evdev.conf
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin-9"
EndSection
Et voilà. Can somebody help ?
Last edited by kero (2012-09-27 17:39:38)

Probably because "latin-9" doesn't exist?
# nano /usr/share/X11/xkb/symbols/fr
xkb_symbols "latin9" {
include "latin"
include "nbsp(level3)"
name[Group1]="French (legacy, alternative)";
key <TLDE> { [ oe, OE, leftdoublequotemark, rightdoublequotemark ] };
key <AE01> { [ ampersand, 1, dead_acute, periodcentered ] };
key <AE02> { [ eacute, 2, asciitilde, Eacute ] };
Try it without the dash (without the "-").
And don't forget to mark it as solved (by editing the first post).

Unable to load some websites after an update to IOS6

I am unable to load some websites in both Safari and Google Chrome. This did not bother me until I found at that I cannot access some websites I can access before and frequent. I am unsure if this was caused by the update to ios6, but this incident only happened after the update. I am unsure as well if this is related to the problem of me unable to connect to itunes and app store after the update. I've fixed those by changing my DNS to 8.8.8.8 and changing the time trick. I've also noticed that twitter and some apps crashed a lot. I have no problem connecting to the wifi though. Thank you in advance.

Some additional details I have also noticed. Some images will not show or appears as a blue and white question mark in some websites. Even here in apple website.

Itunes was unable to load data provider from sync services! Please help!

Whenever I try to sync my ipod to my computer it always says "itunes was unable to load data provider for sync services" and I have no idea what to do. People have said that you change the sync services folder to sync services_old but I dont have a sync services folder when I go into app data / roaming / apple computer PLEASE HELP!
It still lets me sync my music and transfer music but the message wont go away.
Specs:
itunes is upto date
iOS 6.1.3 on 4th generation ipod if that helps
Windows 7

In the course of your troubleshooting to date, have you also worked through the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

Application crashes when I am simultaniously loading media file

Hi,
I am using JavaFx 2.2.3
if I am simultaniously loading media file to MediaPlayer again and again after a while it reflect un-supported media file error message and then a JVM show a fatal-error message box and then application crashes.
I donot understand what i am doing wrong.
Please suggest if anu one knows.
The code which i used for this as bellow.
*public class Mp4Player {*
private MediaPlayer mediaPlayer;
private String mediaFileName = "";
private MediaViewBuilder mediaViewBuilder;
private MediaView mediaView;
private PlayerResMgr ResMgr;
private String snapShotFileName;
private boolean mediaErrorOccured = false;
private boolean playerErrorOccured = false;
Logger log = Logger.getLogger(Mp4Player.class);
*public Mp4Player(PlayerResMgr ResMgr){*
this.mediaViewBuilder = MediaViewBuilder.create();
this.ResMgr = ResMgr;
*public MediaView loadMediaToPlayer(String sourceMovieFile){*
*try {*
System.out.println(sourceMovieFile);
String MEDIA_URL = new File(sourceMovieFile).toURI().toURL().toString();//("file:\\"+sourceMovieFile).replaceAll("\\", "/");//
mediaFileName = new File(sourceMovieFile).getName();
final Media media = new Media(MEDIA_URL);
handleDefaultErrorEventOnMedia(media);
mediaPlayer = new MediaPlayer(media);
handleDefaultEventOnPlayer();
handleDefaultErrorEventOnPlayer();
mediaViewBuilder.preserveRatio(true);
mediaView = mediaViewBuilder.build();
mediaView.setMediaPlayer(mediaPlayer);
mediaPlayer.setAutoPlay(true);
*} catch (Exception ex) {*
return mediaView;
*public void setForwardingLevel(double forwardingLevel){*
if(mediaPlayer!=null)
mediaPlayer.setRate(forwardingLevel);
*public void playMedia(){*
*try {*
log.info("Playing Medaia File "+mediaFileName);
*if (mediaPlayer != null) {*
mediaPlayer.play();
*} catch (Exception ex) {*
log.error("Exception While playing media file ", ex);
*} catch (Error er) {*
log.error("Error While playing media file ", er);
** Pause media file.*
*public void pause() {*
*try {*
log.info("Inside HandlePause Button");
*if (mediaPlayer != null) {*
mediaPlayer.pause();
*} catch (Exception ex) {*
log.error("Exception while Media-Player paused ", ex);
*} catch (Error er) {*
log.error("Error while Media-Player paused ", er);
*public void stopMedia() {*
*try {*
log.info("Inside HandleStop Button");
*if (mediaPlayer != null) {*
mediaPlayer.stop();
*} catch (Exception ex) {*
log.error("Exception while stopping-Media file ", ex);
*} catch (Error er) {*
log.error("Error while stopping-Media file ", er);
*public Duration getMediaCurrentTime(){*
Duration currentTime = null;
if(mediaPlayer!=null)
currentTime = mediaPlayer.getCurrentTime();
return currentTime;
*public void seekMediaPlayer(Duration seekDuration){*
*if(mediaPlayer!=null){*
mediaPlayer.seek(seekDuration);
*public Duration getTotalMediaDuration(){*
Duration totalDuration = null;
*if(mediaPlayer!=null){*
totalDuration = mediaPlayer.getMedia().getDuration();
return totalDuration;
*public void playerStartTime(Duration startDuration){*
if(mediaPlayer!=null)
mediaPlayer.setStartTime(startDuration);
*public void playerStopTime(Duration stopDuration){*
if(mediaPlayer!=null)
mediaPlayer.setStopTime(stopDuration);
*private void handleDefaultErrorEventOnMedia(final Media media) {*
*if (media != null) {*
*media.setOnError(new Runnable() {*
*@Override*
*public void run() {*
*if (media.getError() != null) {*
mediaErrorOccured = true;
*// movieRuning = false;*
final String errorMessage = media.getError().getMessage();
log.error(errorMessage);
*media.onErrorProperty().addListener(new ChangeListener<Runnable>() {*
*@Override*
*public void changed(ObservableValue<? extends Runnable> arg0, Runnable arg1, Runnable arg2) {*
*if (media.getError() != null) {*
mediaErrorOccured = true;
*// movieRuning = false;*
final String errorMessage = media.getError().getMessage();
log.error(errorMessage);
*media.errorProperty().addListener(new ChangeListener<MediaException>() {*
*@Override*
*public void changed(ObservableValue<? extends MediaException> arg0, MediaException arg1, MediaException arg2) {*
*if (media.getError() != null) {*
mediaErrorOccured = true;
*// movieRuning = false;*
final String errorMessage = media.getError().getMessage();
log.error(errorMessage);
*private void handleDefaultEventOnPlayer() {*
*if (mediaPlayer != null) {*
*mediaPlayer.setOnPlaying(new Runnable() {*
*@Override*
*public void run() {*
*// if (stopRequested) {*
*// mediaPlayer.pause();*
*// movieRuning = false;*
*// stopRequested = false;*
*// } else {*
*// playButton = "||";*
System.out.println("Set On Playing method ");
*mediaPlayer.setOnReady(new Runnable() {*
*@Override*
*public void run() {*
*if(mediaPlayer!=null){*
mediaPlayer.play();
ResMgr.getM_PlayMgr().updateValues();
*// mediaPlayer.setCycleCount(repeat ? MediaPlayer.INDEFINITE : 1);*
*mediaPlayer.setOnEndOfMedia(new Runnable() {*
*@Override*
*public void run() {*
*// if (!repeat) {*
System.out.println(mediaPlayer.getStatus());
*// mediaPlayer.stop();*
*// movieRuning = false;*
*// stopRequested = true;*
*// atEndOfMedia = true;*
ResMgr.get_CNTResMgr().getEditorController().handleStopAction(null);
*mediaPlayer.setOnStopped(new Runnable() {*
*@Override*
*public void run() {*
*if (mediaPlayer != null) {*
*// movieRuning = false;*
*// System.out.println("" + mediaPlayer.getStatus());*
*// if (cutInDuration != null && cutOutDuration != null) {*
*// timeSlider.setValue(cutInDuration.toMillis());*
*// ResMgr.get_CNTResMgr().getEditorController().handleStopAction(null);*
*private void handleDefaultErrorEventOnPlayer() {*
*if (mediaPlayer != null) {*
*mediaPlayer.onErrorProperty().addListener(new ChangeListener<Runnable>() {*
*@Override*
*public void changed(ObservableValue<? extends Runnable> arg0, Runnable arg1, Runnable arg2) {*
*if (mediaPlayer.getError() != null) {*
playerErrorOccured = true;
final String errorMessage = mediaPlayer.getError().getMessage();
log.error(errorMessage);
String errorMessageStr = "Procedure contains incompatible video files and cannot be imported";
ResMgr.getMsgDialogMgr().showMessage(errorMessageStr);
*mediaPlayer.errorProperty().addListener(new ChangeListener<MediaException>() {*
*@Override*
*public void changed(ObservableValue<? extends MediaException> arg0, MediaException arg1, MediaException arg2) {*
*if (mediaPlayer.getError() != null) {*
*// movieRuning = false;*
*// isError = true;*
final String errorMessage = mediaPlayer.getError().getMessage();
log.error(errorMessage);
String errorMessageStr = "Procedure contains incompatible video files and cannot be imported";
ResMgr.getMsgDialogMgr().showMessage(errorMessageStr);
*mediaPlayer.setOnError(new Runnable() {*
*@Override*
*public void run() {*
*if (mediaPlayer.getError() != null) {*
*// movieRuning=false;*
final String errorMessage = mediaPlayer.getError().getMessage();
log.error(errorMessage);
String errorMessageStr = "Procedure contains incompatible video files and cannot be imported";
ResMgr.getMsgDialogMgr().showMessage(errorMessageStr);
*mediaPlayer.setOnPaused(new Runnable() {*
*@Override*
*public void run() {*
System.out.println("On set On Paused Method ");
*// if(movieRuning)*
*// System.out.println("On set On Paused Method movieRunning == "+movieRuning);*
*// mediaPlayer.play();*
Thanks

hello again, i tryed repair again and i think i have fixed it , also i reduced the file size from HD to 1024x720 and it seams to be working good , i also exported to one of my external drives, but i think it might have been a problem with the main drive, so the repair seems to have sorted it out , thank you all for your help
Regards
Stacey

After 10.8.3 update keep booting recovery...Unable to load mach_kernal

I installed 10.8.3 as well as rMBP SMC update yesterday. Afterwards I was using Windows 8 via BootCamp and put the mac to sleep. This morning it went straight for boot into recovery partition. I choose to boot in Windows 8 (which I'm using now), but I cant boot into Mountain Lion! When I choose the ML boot disk, it loads recovery partition. After trying "verbose boot" I was an error like 'unable to load mach_kernal'. I repaired disk and permissions.. no luck! I need this for work!

No, what you should do is properly install 10.8.3 and let it restart OSX and get back into it and make sure it works fine. Then put your primary boot back on Bootcamp. You probably installed the update and didn't boot back into OSX after that initial install. You probably had Bootcamp set as your default or something. That should never be done when you install updates that require the system to reboot. It's just a general rule of thumb you need to follow. Process the updates necessary for whatever OS you're running and the restart must happen back into that same OS to make sure the update took properly.

Eclipse Plugin Creation - "Plug-in name was unable to load class " error

Hi everybody and happy new year to you all,
i got a little problem again. I have written the first lines of code of my plugin and wanted to test it (run as Eclipse Application). I got the following error-msg, when clickin either on the menu item or toolbar button:
"Could not create action delegate for id: org.eclipse.tui.inpulse.actions.InpulseStart
Reason:
Plug-in org.eclipse.tui.inpulse was unable to load class org.eclipse.tui.inpulse.InpulseStart."
My project has the following properties (of which i read they are important):
Source folder: org.eclipse.tui.inpulse/src
Output folder: org.eclipse.tui.inpulse/bin
Dependencies: org.eclipse.ui, org.eclipse.core.runtime
Extensions: org.eclipse.ui.actionSets
ExtensionsPoints: none
The following is my plugin xml:
<plugin>
   <requires>
          <import plugin="org.eclipse.core.resources"/>
        <import plugin="org.eclipse.ui"/>
    </requires>
    <runtime>
          <library name="Inpulse.jar"/>
    </runtime>
    <extension
          id="org.eclipse.tui.inpulse.InpulseActionSet"
          name="org.eclipse.tui.inpulse.InpulseActionSet"
          point="org.eclipse.ui.actionSets">
        <actionSet
            id="org.eclipse.tui.inpulse.InpulseActionSet"
            label="Inpulse"
              visible="true"
         description="The action set for the Eclipse Hello World example">
         <menu id="org.eclipse.tui.inpulse.InpulseMenu" label="Inpulse">
               <separator name="samples"/>
         </menu>
         <action id="org.eclipse.tui.inpulse.actions.InpulseStart"
               menubarPath="org.eclipse.tui.inpulse.InpulseMenu/samples"
               toolbarPath="Normal"
               label="Inpulse"
               tooltip="Start pattern search."
               class="org.eclipse.tui.inpulse.InpulseStart"/>
        </actionSet>
   </extension>
</plugin>The javafile "InpulseStart.java" is in the "org.eclipse.tui.inpulse" package and has the first line "package org.eclipse.tui.inpulse;". The class "InpulseStart" implements "IWorkbenchWindowActionDelegate".
So the following members are implemented:
public void run(IAction proxyAction){...};
public void selectionChanged(IAction proxyAction, ISelection selection){...};
public void dispose(){...};
//and some additional ones ;-)I really dont know what i do wrong. If you have an idea, what i just miss out or do wrong, id be glad if you helped me out!
Cya

Aye, you are right, i should/could have posted this somewhere else. I just hoped, that i can get a good answer here, cause ppl helped me out very nice before.
Im sorry if i offended users of this forum...
The "advice" is recognized and i will post somewhere else in case i have a eclipse specific problem.

Unable to load media core plug in : ImporterAVI and ExporterAVI

Similar Messages

Maybe you are looking for