Unable to load movie playlist?

I'm really starting to regret Upgrading to Director 11. I
didn't have any of these issues going from MX to MX 2004. All I'm
trying to do is make a simple projector work on a Mac and it's one
issue after another. Not to mention all this after updating a whole
boat load of Xtras 11 requires.
The new one is this;
Unable to load movie playlist. Does the INI file exsist? It
must contain a section '(Movies)' with an entry
'Movies01=pathname.dir'.
I've already read a couple of other forum post with the same
error message going on with others but can't find certain files
required to make the fix like the 'Projec32.skl',
and I don't know how to read, let alone make an .INI file.
I'll mention I got this error after updating to Shockwave 11
EVEN though I was not publishing a Shockwave movie.
I know I just need to include a certain file on my CD when I
burn one because all works great on the desk top, but I'm throwing
darts trying to figure out what the CD burn is missing.
So to make a long story short does anyone know what I might
be missing?
I'm new to making director movies for the Mac, and even using
a Mac so I might need it spelled out a little more for being a
novice.
Thanks in advance. :o)>
PS I tried making a Mac Projector from my PC with no good
results either.

This is a very frustrating problem.  I have run into it as well, but can't tell you exactly how I solved it, its been a while since I've seen it.  It does have something to do with the length of the path to your projector when its published.  I would suggest moving your movie as close as possible to the root of the drive, you may even want to restart to ensure all the internal variables have been reset and then republish the movie.
If you publish the movie from your authoring location and then copy the projector to a cd or the desktop the path length seems to be built into the projector at publishing. So that does not solve the problem.  It is fairly easy to get a long path name - c:/mylocaldrive/documents and settings/yourusername/yourprojectsfolder/yourprojectname.dir has a path name length of 100 characters!  I realize you are on a mac, but the same rules apply.
I also might be mistaken with the maximum path length.  Perhaps its 128 characters?
Has anyone else run into this error?
Mike M

Similar Messages

  • Unable to Load Movie Error Message

    Once I import video into photoshop...when I click on the video file it gives me this error message: The selected file cannot be played because your system does not have the required compressor/decompressor(codec) installed.  Please help.  I have no idea what this means.  Thanks!

    You need to download the latest codes from the web and install them. Generally codecs are programs to decompress/compress the video files. So there some codecs which can compress/decompress all types of file formats.

  • How do you fix a non-loading movie on your iPod?

    I have an iPod touch 4. I just downloaded a movie. I had lots of space to do so. Now I'm trying to watch the movie and a button keeps comin up and it says "unable to load movie." What is wrong?! I was wondering how you get it to load. It's a two hour movie but it won't load.

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsyn/delete the move and resync/redownload
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • WOW! unable to load video

    hello i have a.p.a.s.loaded and ready to go.i click on a video square and it says to download Quicktime player.
    this i have done.
    restarted computer, restarted a.p.a.s. and Quicktime.
    i then clik a video square and I get unable to load video error message.
    any help would be appreciated.
    thank you

    Thank you, Jim.
    I have all my picture files in A.P.A.S.3.2
    i did a reconnect all missing files. I got no responce. All files are in A.S.A.S. 3.2
    I click on a thumbnail and get: UNABLE TO LOAD MOVIE
    THE SELECTED FILE COULD NOT BE PLAYED.
    Previously I adjusted Q.T. PLAYER so that it works well displaying video on other web sites i visited.
    Iwill wait for a reply.
    CHEERS!

  • Trying to access Netflixs and pick movie but I get "Unable to load this content at this time"

    trying to access Netflixs and pick movie but I get "Unable to load this content at this time"

    This earlier posting worked for me:
    "This worked for me without having to reset my Apple TV universe: Press Menu and Down Arrow keys simultaneously for 6 seconds until the light flashes rapidly."
    Thank you!

  • My rental movie keeps saying "unable to load at this time"

    I just watched one movie, then I started another rental. It keeps saying unable to load content at this time and to try again later.

    Go to Settings > General > Date & Time, make sure it's correct.

  • I down loaded a rental movie and stopped part way through . i turned the computer on and off and when i went back on itunes it didnt show up on the rental playlist and movie playlist.how can i get the movie back?

    i down loaded a rental movie and stopped part way through . i turned the computer on and off and when i went back on itunes it didnt show up on the rental playlist and movie playlist.how can i get the movie back?

    Unless it has recently changed you can only watch rentals on the device or mac you rent them on.

  • "open project was cancelled or the application was unable to load database for..."

    I'm doing a project for my Professional Writing course and I
    have to use RoboHelp to create an online help document. The
    professor provided templates for us to use but when I go to open
    the project file I get the following error: "open project was
    cancelled or the application was unable to load database
    for....(then the directory)"
    I know the project file isn't corrupted because the members
    of my class are using the same one without issue. I tried
    re-downloading the file, I also re-installed the program itself,
    still with no luck. I'm using a Trial Version of RoboHelp 6.0 .
    The only other suggestions I have seen are that I don't have
    edit perms for the system, but it's my personal laptop and I have
    full admin privs. I thought at first that the folder was read-only,
    but when I opened it up all it displays is the little green box in
    the checkbox (which doesn't mean the folder is read-only, it's just
    some stupid windows default, it's only read-only if the box is
    actually checked). I tried making the entire directory read-only
    and then turn it off but still get the same error.
    Any suggestions?

    There's a topic on my site about Opening Projects that
    includes the method of deleting the CPD and XPJ files but I didn't
    cover that as the project is good for everyone else. Anything is
    worth a try at the moment though.
    Another thing to try is to rename the course folder, then
    create a new folder with the same name plus all sub folders. Then
    move the files across. That will ensure the folder properties are
    good and not read only. Yes I know what you said but again anything
    is worth a try.
    Also, in the last post you are saying the directory is not
    read-only. I assume the files are all good?
    Ref my previous post, is it the case that now you are getting
    an error before the original error would have popped up?

  • Adobe DPS: unable to load media after video montage.

    Hi there,
    I am currently using Adobe Indesign CS6 with the latest update of the Folio panel and work on a digital magazine in which I imported some videos in different extensions (*.mov and *.mp4).
    Everything worked fine on iPad, but everytime I make a video montage using Adobe Premiere Pro CS6, a message error "Unable to load media. Please check your internet connection or try again later" appeared on my iPad screen.
    I exported my media from Adobe Premiere in *.mp4 using H.264 codecs for Apple TV/iPad/iPhone, dimension 1280 x 720 and also tried with 1024 x 768, but that didn't work.
    Then, I imported my original videos without any montage making on DPS, they work fine. One of the original video has an extension *.mov and the other one *.mp4.
    I followed the steps that I read on DPS forums by some users facing the same issue, but that didn't make good results.
    So, is there anything I have missed in Adobe premiere Pro CS6 as after making video montage, my iPad always displays the message error?  and why each time I use the same two videos without passing through Adobe Premiere, I can play the video without trouble?

    I tried both softwares Handbreake and Adobe Media Encoder CS6 to render my final editing but it always failed.
    However, I restarted my whole video project using a free easy-to-use video editing software I downloaded from the internet, now it works fine on ipad with *.mov extension.
    By the way, Adobe Indesign does not support *.m4v.
    Anyway, I will go on trying to figure out what's the flaw in Adobe Premiere Pro.
    Thanks anyway _Felipe!

  • Host: Unable to load application configuration + wrong install version on download

    i am using 64 bit windows 7 ... when unable to playing video, it redirects me to the adobe download pages to get flash player ... the page says i am about to download flashplayer for win7 64 bit, of 9MB approximately, but the file i get has name "install_flashplayer11x32_mssd_aih.exe" (NOTE THE NUMBER 32) and this file just wont install it ends with error message: HOST: Unable to load application configuration ...
    By google i found also file install_flashplayer11x64_mssd_aih.exe (NOTE THE NUMBER 64) ... this file runs the install, i get the final screen saying "installation completed" but after clicking the "finish" button i get an error message saying "an error occured while sending a command to the program" ...
    I am just getting mad ... its 3 days i am trying to figure aout this problem ...
    i also tryed files as "install_flash_player_11_plugin.exe" , "install_flash_player_11_plugin.msi" , "install_flash_player_11_active_x.exe" and "install_flash_player_11_active_x.msi" ... those files actually proceeds with the install, but at the end, the videos are still not displaying ...
    When i am checking the plugins statuses in my firefox addons manager, it says Shockwave Flash is all right ...
    The precedent version of flash player was working just fine, i do not understand why you must make such a mess every 2 months ...
    How do i get work this?

    yes, the pages is http://get.adobe.com/flashplayer/
    the page says:
    Adobe Flash Player 11.3.300.257 (9.36 MB)
    Your system: Windows 64-bit , English, Firefox
    but when i click the "Download now" button i get the file named "install_flashplayer11x32_mssd_aih.exe" (NOTE THE NUMBER 32) which wont start and after few seconds i get the message "HOST: Unable to load application configuration"
    but finaly i solved the problem ... i just installed the file found by google on some private page "install_flashplayer11x64_mssd_aih.exe" (NOTE THE NUMBER 64)
    (the page is here: http://www.ziddu.com/download/16693235/install_flashplayer11x64_mssd_aih.exe.html)
    and after that i disabled the protected mode of flashplayer by adding a line in the cfg file
    the howto is here: http://forums.adobe.com/thread/1018071
    i must say its quite shameful one must get this torture to have movies playing on websites ... this cant happen at open source stuf, at least not for 3 days ...
    and being already here and complaining, i must say also (i hope some adobe emploee will read this) i am quite disgusted (and i believe not only me) by adobes bad habit to provide other software than flashplayer, when they include mcafee antivir into the install ...
    it is literally taking the user as a stupid one ...
    if i will need an antivir, i will look for it ...
    i just hate when some society tries to infiltrete in my comp some crap software counting on possibility that at the download i will not pay enough attention
    its just ridiculous and shameful behavior

  • Remote App 3.0 Movie Playlist

    Recently upgraded to Remote App 3.0, along with an ATV upgrade. Glad to see the WiFi issues have been cleared up. new problem however is that Movie Playlists will not start the movie.
    Scenario is:
    Load Remote App 3.0
    Connect to "Office" Apple TV
    Select "Media Server" from Home Share
    I do no select any specific category, and I am presented with all my Playlists
    Select Movie from any playlist (Smart or no) the movie will not start
    Anyone else running in to this problem.
    If I look under specificly the "Movies" section in the Home Share, the only options I have are Unwatched, All Movies and Generes.
    When using the navigation controls and having the AppleTV it self view the play lists (after enabling the option to see Playlists in all areas) I am able to use the Smart Playlists I have been able to use. This would isolate the issue to Remote App 3.0
    The question is, why won't the latest Remote App start a movie from a playlist?

    Issue confirmed.
    Resolved with remote update 3.0.1

  • Why do I get the error message "unable to load page (HTTP 502) when I try to open Mobile Web?

    I have an LG Octane 3 basic phone.   Does everything I need, phone and text, and I never was interested in web or e-mail capabilities until I recently upgraded our plan to the "More Everything" and was able to use data and check e-mail and access the internet.   Whenever I try to open Mobile Web, I get the error message "unable to load page (HTTP 502)".    As of March 31, 2015, all of us basic phone users lose the "Mobile Email" app on our phones, and will have to access web versions of our e-mail via the web.  Which is currently unavailable and doesn't work.
    Over a week ago, did a chat session with a tech support rep, and she indicated that either she or an engineer would contact me with how to fix the problem.   Have not heard anything from anybody, and the deadline is approaching quickly.   Have no need of all the excess features of a smart phone, nor do I wish to be forced to jettison a perfectly working phone for my needs and buy something I don't want to be able to do 2 simple things.............check e-mail to see if there's something that needs to be answered right away, and to check traffic reports when I'm on the road, or find something in an area with which I'm not familiar.     Not really too much to ask, you would think....   )
    Has anyone else had this same problem, and if so, how do we fix it....???  My next move is a phone call, but those haven't always been very productive.
    If any of you have any ideas why this error keeps coming up and the web can't load, and some on how to fix it, I would really appreciate some advice.
    Thanks in advance.
    Karen

    Since the chat session got no reply, I contacted Verizon by phone and a very nice level 2 tech created a trouble ticket and sent it up the food chain.  Got a call back, maybe 2 days later, and had a nice, although very long session with a higher level tech.  They had determined that the browser for the LG Octane is an old one and no longer supported by Verizon.    We tried everything we could to download the Opera browser, but since I was totally unable to get Mobile Web to work, couldn't do it.   The only other possible "fix" was to totally reset the phone to factory specs and try it again.   That would mean a lot of work on my part to move anything I didn't want to disappear off the phone, and find a place to forward texts that had to be saved.   Caught our tenants lying about why the rent was late (again), and need that for when I put them back on a lease....  
    Long story short is that unless we try this total reset, which isn't a sure fix, either, anyone who isn't able to access the Mobile Web with the LG Octane will have to change their plan to avoid paying for data that you can't access using any method. 
    I ran a test with an app that I knew was no longer valid.....that was sending photos to PixPlace.   Got the exact same error message as when trying to access Mobile Web to get the web version of my e-mail.   That just verified that the 502 error is, at least in the LG Octane, for an app that no longer works.   After today, we'll get the same thing when we try to access Mobile E-Mail.
    Have to admit, it's a real ****-off, but this shouldn't surprise me, since Verizon won't repair older copper phone lines if you are in an area where FIOS is offered. 
    I am going to immediately change my husband's and my cell phone plan to one without data, and see what I can find that will still give unlimited calls and text.  The way my luck runs, they won't offer one for a decent price.  The other half has some very long-winded friends and he was always running over minutes, and some months are very text-heavy and I'd go over my limit.   Absolutely HATE touch screens, and am not looking forward to having to get a new phone.  

  • Unable to load package

    I have created an SSIS package in BI dev studio which i can debug and run fine. I have saved the dtsx file to a production server which calls it using dtexec as part of a batch script (we are migrating from foxpro). I am getting the following error that i dont understand.
    I dont know if this is relevant but i cant execute packages by double clicking them as DTexecui is not installed (not sure why as i have installed the client tools and integration server). Hardware is Dell poweredge 2850 dual xeon 2gb ram with win 2k sp4 and sql 2005 sp1.
    Microsoft (R) SQL Server Execute Package Utility
    Version 9.00.1399.06 for 32-bit
    Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
    Started:  12:29:19
    Error: 2006-07-06 12:29:20.75
       Code: 0xC0011007
       Source: {B06EB426-BBE8-4E09-87FC-32ED753A142F}
       Description: Unable to load the package as XML because of package does not ha
    ve a valid XML format. A specific XML parser error will be posted.
    End Error
    Error: 2006-07-06 12:29:20.79
       Code: 0xC0011002
       Source: {B06EB426-BBE8-4E09-87FC-32ED753A142F}
       Description: Failed to open package file "\\SERVER_A\Scripts\CLIENT\Package.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.".  This happens when loading a package and the file cannot be opened or loaded correctly  into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
    End Error
    Could not load package "\\\\SERVER_A\Scripts\CLIENT\Package.dtsx" because of error 0xC0011002.
    Description: Failed to open package file \\SERVER_A\Scripts\CLIENT\Package.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.".  This hap
    pens when loading a package and the file cannot be opened or loaded correctly in
    to the XML document. This can be the result of either providing an incorrect fil
    e name was specified when calling LoadPackage or the XML file was specified and
    has an incorrect format.
    Source: {B06EB426-BBE8-4E09-87FC-32ED753A142F}
    Started:  12:29:19
    Finished: 12:29:20
    Elapsed:  1.719 seconds

     We are having the same problem:
    My team is using SqlServer 2005 SSIS to develop  package for Consolidated Views. This works fine on my machine in Visual Studio when they run it as a script from command prompt from their desktop. However, when they move this package to ETL box, the package runs fine Visual Studio environment but fails when run from the script with the errors: 
    Started:  12:57:45 PM
    Error: 2006-08-04 12:57:45.87
       Code: 0xC0011007
       Source: {519D338B-8874-40A8-A385-0D53E868A57C}
    Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted.
    End Error
    Error: 2006-08-04 12:57:45.87
       Code: 0xC0011002
       Source: {519D338B-8874-40A8-A385-0D53E868A57C}
    Description: Failed to open package file "C:\SM_BI_EXTRACTS_SHARED\Shared\Int
    egrated Views\Integrated Views\CV_Product.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.".  This happens when loading a package a nd the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
    End Error
    Could not load package "C:\SM_BI_EXTRACTS_SHARED\Shared\Integrated Views\Integrated Views\CV_Product.dtsx" because of error 0xC0011002.
    Description: Failed to open package file "C:\SM_BI_EXTRACTS_SHARED\Shared\Integr
    ated Views\Integrated Views\CV_Product.dtsx" due to error 0x800C0006 "The system  cannot locate the object specified.".  This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be  the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
    Source: {519D338B-8874-40A8-A385-0D53E868A57C}
    Started:  12:57:45 PM
    Finished: 12:57:45 PM
    Elapsed:  0.016 seconds
    C:\SM_BI_EXTRACTS_SHARED\Shared>rem "C:\Program Files\Microsoft SQL Server\90\DT
    S\Binn\dtexec" /f "C:\SM_BI_EXTRACTS_SHARED\Shared\SSIS\IntegratedViews\Integrat
    edViews\CV_Sales_Rep.dtsx"
    C:\SM_BI_EXTRACTS_SHARED\Shared>rem "C:\Program Files\Microsoft SQL Server\90\DT
    S\Binn\dtexec" /f "C:\SM_BI_EXTRACTS_SHARED\Shared\SSIS\IntegratedViews\Integrat
    edViews\CV_Sales.dtsx"
    Can someone help us understand the problem? We are new to SSIS. We also want to know exactly what needs to be on the Server that will be running our SSIS ETL programs (that is, what components of SSIS -- SQL Server 2K5 is already loaded).
    We are using SQL 2005 on Dell Servers running Win 2003, with the latest service packs. Microsoft SQL Server Integration Services Designer Version 9.00.2047.00

  • Error "This web part was unable to load"

    Hi!
    I'm designing workflow in Sharepoint designer 2013 for Project Server. I have 3 stages. In second stage I have "start a task process (task outcome to variable: outcome)" and in "transition to stage" I have:
    If variable: outcome equalls approved
      go to third stage
    else
      go to first stage
    I receive a new task and I click "rejected". Then I refresh this page "Project Detail Pages - Workflow Stage Status" and I get this error:
    Workflow Status
    This Web Part was unable to load.
    Information that may be useful in solving this problem was written to the Unified Logging Service (ULS) log on the Project Web App with the following ID: c2780c9c-323c-20cd-dc2e-02cf3e2bd3d3
    For more information, contact your Project Web App administrator.
    How do I solve this? Workflow goes back to first stage and everything else seems to work (In my first stage I have wait for project submit and if I click submit, workflow goes to second stage and that web part reloads fine).
    Best regards
    Parkelj

    I found a way to handle this issue. Webpart is not able to capture the movement to the last stage in the same phase. You can easily move back to a stage in the other Phase. e.g.,
    Phase 2: Stage 2 -> Phase 2: Stage 1    (Issue)
    Phase 2: Stage 2 -> Phase 1: Any Stage ()
    You can add a new stage in previous phase and in the Transition to Stage segment put a Go to Stage action to your desired stage.
    The flow will be
    Phase 2: Stage 2 -> Phase 1: Transition Stage -> Phase 2: Stage 1
    By doing this the Workflow status will work fine but the only trade off will be an additional Phase movement will be displayed in the workflow visualization (marked in red in the below image).
    I hope it will help you guys.

  • ODI Error Unable to load data

    Hi Frnds,
    I'm New to ODI tech. i need your assistance in resolving the following issue:
    My source has - 6 rows of data
    My target has - no rows.
    both source and target are oracle, and i used Ikm: sql to oracle and IKM: sql control append and oracle incremental update
    but still it was unable to load the data.
    In the operator window, i was able to view that data have been loaded. - in step 3.
    But in step 6 - integration - insert new rows showing error.
    The Return code of error : 4098
    Message: ora-04098: trigger is invalid and failed revalidation.
    Even, when i tried using toad to enter the data into target database manually by writing query. It was showing same error for me.
    Is the issue is with ODI or with Oracle database ?
    Is there any method to resolve the issue ? How do we handle triggers in ODI ?
    Thanks in advance,
    Raj.

    Nobody would know the answer to your question.
    Yes you can drop the trigger. You can also drop the table too. And there will be no need to create an interface or move data.
    Sorry, I am being sarcastic here.
    We will not know if that trigger is needed or not. Maybe it belongs to an ERP app that is maintaining some business rules or its an OBIEE staging area and needs trigger to validate data. Who knows.
    You should ask your administrator as to why the trigger is invalid. What is the use of the trigger. Try to find out the source of the problem.
    You should not simply drop the trigger.

Maybe you are looking for