Unable to Load NAM Module - showing PwrDown

I have a NAM Module installed in a Cat 6509 and I am unable to bring it online.
The Show Mod command shows that the module is in the PwrDown status.
If I reset the module by reseating it in the chassis I get a logg message saying:
%C6KPWR-SP-4-DISABLED: power to module in slot xx set to off (Module Failed SCP dnld).
Does this mean that the module has a fault or is there a way to recover?
PS - I have tried reloading the whole switch and it makes no difference.
Thanks

You can try hw-module module X reset . X is your module number . I doubt there is a problem with the nam just sounds like the mod is powered down.

Similar Messages

Loading resource module from private folder.

Hi,
I have client(AIR)-server(Java) application working with many locales. Every now and then someone finds a bug in translation and repairs it. Whenever somebody updates translation (via other tool wchich also creates new xx_XXresourceModule.swf on the server) it's created new resource module. From this reason I want to have resourceModules located on server. Changing resource on server will spread this change on each client during client initialization. Client during starting checks "somehow" whether there is newer resource module on server side and if there is then it should download and loads it.
The reason why I don't want to just call IResourceManager.loadResourceModule(serverURL+resourceModule.swf) every time client start is quicker client start up. If there isn't newer localization it uses the one which was dowloaded and stored earlier during former start.
The problem is that when I download resourceModule.swf I could store it only into File.documentsDirectory where I have WRITE rights. But later on I am not able to load resource module via IResourceManager.loadResourceModule(). It complains "Unable to load resource module from: file:///c:/documents and settings/user/MyDocuments/resourceModule.swf" Do I miss something or is it possible to call loadResourceModule() when the SWF file is located somewhere in myDocument folder?
Any idea how to solve it?
//pyso

AIR had a security restriction that you can only load modules from the app directory (i.e. the same folder the application was installed to). However they added a loadBytes(...) function to allow a module to be loaded that had been downloaded. I don't know if this was added to the resource stuff however.
You cannot blindly add modules to the app directory either (at least ones that weren't part of the initial install) as the AIR runtime tries to work out from the directory whether it needs to update itself, and adding files in there confuses it (so say Adobe).
I actually think you might be stuffed unless you create a new version of your AIR application with the new resource bundle, and distribute it as an update.
Gk.
Gregor Kiddie
Senior Developer
INPS
Tel: 01382 564343
Registered address: The Bread Factory, 1a Broughton Street, London SW8 3QJ
Registered Number: 1788577
Registered in the UK
Visit our Internet Web site at www.inps.co.uk
The information in this internet email is confidential and is intended solely for the addressee. Access, copying or re-use of information in it by anyone else is not authorised. Any views or opinions presented are solely those of the author and do not necessarily represent those of INPS or any of its affiliates. If you are not the intended recipient please contact [email protected]

Unable to load your custom module provider's module-factory-class

I am having a problem while I deploy my application. it gives me following error:
Unable to load your custom module provider's module-factory-class com.bea.p13n.descriptor.module.ConfigModuleFactory
Dont know how to resolve it. the class is in p13n_system.jar file, I have added that jar as a library in deployment but still it shows the same error.
Added it in classpath as well but same error. (Dont know exactly how to add in class path, i have added just in "Start Server" tab's classpath)
Any help will be greatly appreciated

Below link might be helpful.
http://kr.forums.oracle.com/forums/thread.jspa?threadID=1049509&tstart=0
Regards,
Anandraj
http://weblogic-wonders.com/

"Unable to load DLL '/system/usr/lib/libidlprinter.so': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"}

I am using intermec printer (directly loading to the printer no system used for printing) for this program and if i run this,i'm getting this below error
"Unable to load DLL '/system/usr/lib/libidlprinter.so': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"}
any help on this .........
Thanks in advance.
using System.Globalization;
using Intermec.Printer;
using System;
using System.IO;
using System.Threading;
class TestCommunicationUSBHost
static UI.Canvas _canvas;
static UI.Keypad _keypad;
static UI.Canvas.Text _exitInstruction;
static UI.Canvas.Text _appliCationTitle;
// static UI.Canvas.Text _companyname;
static string _operatorCodeValue;
static UI.Canvas.Text _operatorCodeDisplayText;
private const string operatorCodeDisplayHeader = "SCAN Code: ";
static PrintControl printControl = new PrintControl();
static Drawing drawing = new Drawing();
private static bool _isExitKeyPressed = false;
// private static Communication.USBHost _usbHost;
static int Main(string[] args)
// Init new UI canvas
_canvas = new UI.Canvas();
// Set up some colors to use
Color white = new Color(255, 255, 255, 255);
Color blue = new Color(50, 100, 150);
// Add UI black background
UI.Canvas.Rectangle bg = new UI.Canvas.Rectangle(0, 0, _canvas.Width, _canvas.Height, blue);
_canvas += bg;
// Add Line
UI.Canvas.Line ln = new UI.Canvas.Line(10, 35, 300, 35, white);
_canvas += ln;
// _companyname = new UI.Canvas.Text(30, 45, "KEYBORD DEMO", "Univers Bold", 18, white);
// _canvas += _companyname;
// Add UI keycode text
_exitInstruction = new UI.Canvas.Text(20, 200, "Press [F4] to EXIT.", "Univers Bold", 18, white);
_canvas += _exitInstruction;
_appliCationTitle = new UI.Canvas.Text(05, 05, " A1 Technologies", "Univers Bold", 23, white);
_canvas += _appliCationTitle;
_operatorCodeDisplayText = new UI.Canvas.Text(20, 100, operatorCodeDisplayHeader, "Univers Bold", 20, white);
_canvas += _operatorCodeDisplayText;
// Set up keypad event handler
_keypad = new UI.Keypad();
_keypad.KeyDown += new UI.Keypad.KeyEventHandler(KeyHandler);
// Set up timer event handler
UI.Canvas.Timer timer = new UI.Canvas.Timer();
timer.Interval = 1000;
timer.Tick += new UI.Canvas.TimerEventHandler(TimerHandler);
timer.Start();
//int USBHost port o or Setup USBHost
Communication.USBHost _usbHost = new Communication.USBHost("/dev/ttyUSB0");
_usbHost.Open();
// Enter UI main loop
_canvas.Run();
// Cleanup UI
_canvas.Dispose();
_keypad.Dispose();
return 0;
public static void KeyHandler(Object o, UI.Keypad.KeyEventArgs eventArgs)
int keycode;
keycode = eventArgs.KeyChar;
if (keycode == 4)
_isExitKeyPressed = true;
return;
public static void TimerHandler(Object obj, UI.Canvas.TimerEventArgs eventArgs)
if (_isExitKeyPressed)
UI.Canvas.Timer timer = (UI.Canvas.Timer)obj;
timer.Stop();
_canvas.Exit();
else
// Open the first USB host device and read any data sent
Communication.USBHost usbHost = new Communication.USBHost("/dev/ttyUSB0");
usbHost.Open();
if (usbHost.IsOpen)
Console.WriteLine("Opened /dev/ttyUSB0 ({0})", usbHost.HIDName);
FileStream fileStream = usbHost.GetStream();
try
int timeout = 0;
int i;
while (timeout < 5)
// Console.WriteLine("Exiting in {0} secs", 10 - timeout);
Byte[] bytes = new Byte[256];
if ((i = fileStream.Read(bytes, 0, bytes.Length)) > 0)
// string data = System.Text.Encoding.ASCII.GetString(bytes, 0, bytes.Length);
string data = System.Text.Encoding.ASCII.GetString(bytes, 0, i++);
_operatorCodeValue = data;
// _operatorCodeValue = _operatorCodeValue + data;
_operatorCodeDisplayText.Data = operatorCodeDisplayHeader + _operatorCodeValue.Substring(_operatorCodeValue.Length - 7, 7);
int leftCordinate = 40;
drawing.Clear();
Drawing.Text line1Text = new Drawing.Text();
line1Text.Point = new Point(leftCordinate + 30, 40);
line1Text.Data = _operatorCodeValue.Substring(_operatorCodeValue.Length - 7, 7);
line1Text.Height = 18;
line1Text.FontName = "CG Times Bold";
drawing += line1Text;
drawing.PartialRendering = true;
printControl.PrintFeed(drawing, 4);
else
Thread.Sleep(1000);
timeout++;
catch (Exception ex)
Console.WriteLine("Exception reading /dev/ttyUSB0: {0}", ex.Message);
// Wait a short while
Thread.Sleep(1000);
// Clean up
// usbHost.Dispose();
return;

Hiya,
The error is because the app tried to import that driver but it was not found. So, you will need
to recheck your project setup, provide locations for imports, etc. I am not familar with Intermec Printer.
The code snippet does not show any information about the DLL import, check there too.
Hope this helps. :)

Unable to load powernow-k8 module

Weird. My AMD Opteron is unable to load the powernow-k8 modules:
[darose@darsys9 kernel26]$ sudo modprobe powernow-k8
Password:
FATAL: Error inserting powernow_k8 (/lib/modules/2.6.26-ARCH/kernel/arch/x86/kernel/cpu/cpufreq/powernow-k8.ko): No such device
dmesg shows the following:
powernow-k8: Found 1 Dual Core AMD Opteron(tm) Processor 165 processors (2 cpu cores) (version 2.20.00)
powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver.
powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver.
But the processor module is already loaded:
[darose@darsys9 kernel26]$ lsmod
Module Size Used by
thermal 20512 0
freq_table 6400 0
processor 39744 1 thermal
Anyone have any idea what gives?
Thanks,
DR

I had a similar problem with the acpi-cpufreq module. Read about it here
graysky wrote:
I figured it out! I took a clue from my /var/log/dmesg
[ 4.633657] [Firmware Bug]: BIOS needs update for CPU frequency support
[ 4.633718] ACPI Error (psloop-0136): Found unknown opcode 20 at AML address ffff88012d27c633 offset 4F, ignoring [20080926]
[ 4.633722] ACPI Error (psloop-0136): Found unknown opcode 6F at AML address ffff88012d27c638 offset 54, ignoring [20080926]
[ 4.633726] ACPI Error (psloop-0136): Found unknown opcode 20 at AML address ffff88012d27c63c offset 58, ignoring [20080926]
[ 4.633729] ACPI Error (psloop-0136): Found unknown opcode 6F at AML address ffff88012d27c640 offset 5C, ignoring [20080926]
That line that reads, Firmware Bug: BIOS needs update for CPU frequency support was really bugging me. So I took a risk, d/l'ed the latest BIOS for my board, flashed, reset all my custom BIOS settings, and rebooted into my new kernel. I'm now able to use acpi-cpufreq and scaling works smoothly
Thanks for all the advice.
Or... it could be that you aren't supposed to use the powernow-k8 module w/ your chip. From what I understand all Opty chips should use it... have you tried to modprobe acpi-cpufreq and see if it works?
Last edited by graysky (2009-04-22 19:49:29)

Powerdns Unable to load module '/usr/lib/powerdns/libgmysqlbackend.so'

hello
i have recently this problem with powerdns
Unable to load module '/usr/lib/powerdns/libgmysqlbackend.so'
the folder "/usr/lib/powerdns" has disapeared
do you know what is the problem ?
thanks

Hiya,
The error is because the app tried to import that driver but it was not found. So, you will need
to recheck your project setup, provide locations for imports, etc. I am not familar with Intermec Printer.
The code snippet does not show any information about the DLL import, check there too.
Hope this helps. :)

Unable to load the kernel module 'nvidia.ko' [SOLVED]

After my most recent kernel upgrade, I can't get my GUI to run. I've tried reinstalling the nvidia driver to no avail.
Any insight would be greatly appreciated. I'm using a GeForce 8400 GS
cat /var/log/nvidia-installer.log
ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most
frequently when this kernel module was built against the wrong or
improperly configured kernel sources, with a version of gcc that differs
from the one used to build the target kernel, or if a driver such as
rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU
installed in this system is not supported by this NVIDIA Linux graphics
driver release.
Please see the log entries 'Kernel module load error' and 'Kernel
messages' at the end of the file '/var/log/nvidia-installer.log' for
more information.
-> Kernel module load error: insmod: error inserting './usr/src/nv/nvidia.ko':
-1 No such device
-> Kernel messages:
NVRM: This can occur when a driver such as nouveau, rivafb,
NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
NVRM: the NVIDIA device(s).
NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
NVRM: No NVIDIA graphics adapter probed!
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as nouveau, rivafb,
NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
NVRM: the NVIDIA device(s).
NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
NVRM: No NVIDIA graphics adapter probed!
NVRM: The NVIDIA probe routine was not called for 1 device(s).
NVRM: This can occur when a driver such as rivafb, nvidiafb or
NVRM: rivatv was loaded and obtained ownership of the NVIDIA
NVRM: device(s).
NVRM: Try unloading the rivafb, nvidiafb or rivatv kernel module
NVRM: (and/or reconfigure your kernel without rivafb/nvidiafb
NVRM: support), then try loading the NVIDIA kernel module again.
NVRM: No NVIDIA graphics adapter probed!
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.
Last edited by wsims (2010-06-22 15:06:04)

if you used the packages from repos, the blacklist is done automatically in nvidia,
$ pacman -Qo /etc/modprobe.d/nouveau_blacklist.conf
/etc/modprobe.d/nouveau_blacklist.conf is owned by nvidia 195.36.31-1
$ cat /etc/modprobe.d/nouveau_blacklist.conf
blacklist nouveau
but i guess you just want to mess your system by using unsupported and very bad ways and you are way smarter than the devs if you used that installer
Last edited by wonder (2010-06-22 14:10:01)

Eclipse Plugin Creation - "Plug-in name was unable to load class " error

Hi everybody and happy new year to you all,
i got a little problem again. I have written the first lines of code of my plugin and wanted to test it (run as Eclipse Application). I got the following error-msg, when clickin either on the menu item or toolbar button:
"Could not create action delegate for id: org.eclipse.tui.inpulse.actions.InpulseStart
Reason:
Plug-in org.eclipse.tui.inpulse was unable to load class org.eclipse.tui.inpulse.InpulseStart."
My project has the following properties (of which i read they are important):
Source folder: org.eclipse.tui.inpulse/src
Output folder: org.eclipse.tui.inpulse/bin
Dependencies: org.eclipse.ui, org.eclipse.core.runtime
Extensions: org.eclipse.ui.actionSets
ExtensionsPoints: none
The following is my plugin xml:
<plugin>
   <requires>
          <import plugin="org.eclipse.core.resources"/>
        <import plugin="org.eclipse.ui"/>
    </requires>
    <runtime>
          <library name="Inpulse.jar"/>
    </runtime>
    <extension
          id="org.eclipse.tui.inpulse.InpulseActionSet"
          name="org.eclipse.tui.inpulse.InpulseActionSet"
          point="org.eclipse.ui.actionSets">
        <actionSet
            id="org.eclipse.tui.inpulse.InpulseActionSet"
            label="Inpulse"
              visible="true"
         description="The action set for the Eclipse Hello World example">
         <menu id="org.eclipse.tui.inpulse.InpulseMenu" label="Inpulse">
               <separator name="samples"/>
         </menu>
         <action id="org.eclipse.tui.inpulse.actions.InpulseStart"
               menubarPath="org.eclipse.tui.inpulse.InpulseMenu/samples"
               toolbarPath="Normal"
               label="Inpulse"
               tooltip="Start pattern search."
               class="org.eclipse.tui.inpulse.InpulseStart"/>
        </actionSet>
   </extension>
</plugin>The javafile "InpulseStart.java" is in the "org.eclipse.tui.inpulse" package and has the first line "package org.eclipse.tui.inpulse;". The class "InpulseStart" implements "IWorkbenchWindowActionDelegate".
So the following members are implemented:
public void run(IAction proxyAction){...};
public void selectionChanged(IAction proxyAction, ISelection selection){...};
public void dispose(){...};
//and some additional ones ;-)I really dont know what i do wrong. If you have an idea, what i just miss out or do wrong, id be glad if you helped me out!
Cya

Aye, you are right, i should/could have posted this somewhere else. I just hoped, that i can get a good answer here, cause ppl helped me out very nice before.
Im sorry if i offended users of this forum...
The "advice" is recognized and i will post somewhere else in case i have a eclipse specific problem.

Unable to load style(SWF is not a loadable module)

While devoloping an App voor iOS we decided to use several StyleSheets.
We are implementing the loading of Stylesheets as:
event_dispatcher:IEventDispatcher = this.styleManager.loadStyleDeclarations2("assests/styles/default.swf");
event_dispatcher.addEventListener(StyleEvent.COMPLETE, OnStyleLoaded);
event_dispatcher.addEventListener(StyleEvent.ERROR, OnStyleError);
running the app on the desktop simulators work fine.
packaging the app with package method fast, and running the app on an iphone4 works fine.
packaging the app with package method standaard, and running the app on an iphone4 gives an error:
Unable to load style(SWF is not a loadable module): assets/styles/default.swf.
Is there something im missing? Why does it work when packaging as Fast, and not as Standard?

Hi,
        The source file is .swf ie(.css is converted to .swf).
         Main swf is running from local.
         Style module is from server.
I set security domain. But it throws security sanbox violation.
What should i do. Even some time if a use the local url means it thorws the same error Unable to load style(SWF is not a loadable module).
thanks,
Jayagopal.

System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)

Hi,
I have a asp.net web application running on windows server 2008 with oracle server 10g installed.
now we are planning to run application on another server with same server as database server. but when the deployed on new server the login page comes up and after login System.DllNotFoundException: Unable to load DLL 'OraOps10.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) exception is thrown. any help would highly be appreciated.

Did you run the ODAC installer, OUI or xcopy, or did you just copy over Oracle.DataAccess.dll to the new machine? If the latter, then you need to run the installer to put in all the necessary Oracle DLLs ODP.NET references.

Unable to load the EJB module. DeploymentContext does not contain any EJB.

I'm writing an enterprise application to familiarize myself with Glassfish 3.1.2 and EJB 3.1. I've created several local, stateless beans, and injected one into a JSF managed bean. The ejb and web modules compile fine, but when I launch the application with Glassfish I get the following startup error and the application does not deploy. I don't understand what it means, can someone ellaborate?
SEVERE: Exception while invoking class org.glassfish.ejb.startup.EjbDeployer prepare method
SEVERE: Exception while invoking class org.glassfish.javaee.full.deployment.EarDeployer prepare method
SEVERE: Exception while preparing the app
SEVERE: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
org.glassfish.deployment.common.DeploymentException: Unable to load the EJB module. DeploymentContext does not contain any EJB. Check the archive to ensure correct packaging for D:\Documents\NetBeansProjects\Test\dist\gfdeploy\Test\Test-war_war.
If you use EJB component annotations to define the EJB, and an ejb or web deployment descriptor is also used, please make sure that the deployment descriptor references a Java EE 5 or higher version schema, and that the metadata-complete attribute is not set to true, so the component annotations can be processed as expected
     at org.glassfish.javaee.full.deployment.EarDeployer.prepare(EarDeployer.java:166)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.prepareModule(ApplicationLifecycle.java:871)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:410)
     at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
     at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291)
     at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259)
     at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461)
     at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212)
     at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
     at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117)
     at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354)
     at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195)
     at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:860)
     at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:757)
     at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1056)
     at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:229)
     at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
     at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
     at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
     at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
     at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
     at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
     at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
     at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
     at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
     at java.lang.Thread.run(Thread.java:722)

My guess is that you deployed an ejb without bean in it. when you have an ejb module, be sure you have at least one bean present.
Are you sure you have implementend some beans? Or did you do this only in the web module?
Try adding an @Stateless bean doing nothing in you ejb module, redeploy and let me know if that works

Unable to load servlet class specified in the module.

Hi,
Hope that I am in the right Forum to ask this question.
I tried to develop basic servlet example as specified in http://java.sun.com/developer/onlineTraining/J2EE/Intro2/servlet/servlet.html.
When I create WAR file in Deployment tool I get the following error. How can I rectify this?
Thank you very much for any help.
Regards,
Indika
Error :
Unable to load servlet class specified in the module.
Please contact online help for assistance.
java.lang.UnsupportedClassVersionError : bonus/controller/BonusCalculationServlet (Unsupported major.minor version 49.0)

Hi Yohan_co,
I haven't used Application Server 8.2, but I think the problem is because the jdk that AS is using is previous to the jdk that your are using to compile your source files.
I hope that it helps you.
Regards

Hi I cant able to see some web photos in my ipad showing 'unable to load' .. Some photos able to see but still almost 90% I can't ...pls help me to clear this issue ...thanks in advance

Hi
My ipad is not able to see some of the photos .... I can see with google images and all .. When I am loading some applications or safari images getting the same issue ..first it's showing 'loading' then its happens like 'unable to load ' pls help me to solve the issue ..thanks

When you say that you can't find them anywhere, I assume that you mean that you can't find them on the iPad even though the storage figure says that the photos are there.
You can try this. I don't know if this will work for you but this was recently discovered as solution for phantom photos. This was copied from a post started by gail from maine
Delete all of your Recently Deleted photos from your Recently Deleted folder
Then go to Settings>General>Date & Time, and change the date back to last September when iOS 8 came out, and then go back to the Recently Deleted folder. Although at the Album level it will still say "0" if you tap on the Album, you will be greeted by all of the "Recently Deleted" photos that have surpassed the 30 day limit. Mine went back to when I installed iOS 8.
She found this in a post where txforever was the person that discovered how to do this.
More photos in settings than photos app shows

Unable to load module "oracleasm" on z/os

I am trying to install Oracle 10.2 on Linux on IBM z/os.
I am having a problem with using asm.
The following is a screen shot of what I did:
linux:~ # id oracle
uid=103(oracle) gid=105(oinstall) groups=105(oinstall),6(disk),106(dba)
linux:~ # /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: 103
Default group to own the driver interface []: 105
Start Oracle ASM library driver on boot (y/n) [n]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: done
Creating /dev/oracleasm mount point: done
Loading module "oracleasm": Unable to load module "oracleasm"
failed
linux:~ # rpm -qa | grep asm
oracleasm-2.6.16.21-0.8-default-2.0.3-1
oracleasm-support-2.0.3-1
oracleasmlib-2.0.2-1
linux:~ # uname -r
2.6.16.21-0.8-default
linux:~ #
What am I missing since I cannot load module oracleasm.
Thanks.

if versions and arch match,
please check messages file while trying to load oracleasm,
e.g. on RH4, it is known oracleasm has problems loading if SELinux is enabled
guido

Error: Unable to load style(SWF is not a loadable module)

Hi,
        While i am trying to load theme dynamically from server, i am getting an error like this
     Error: Unable to load style(SWF is not a loadable module)
Can anybody help me.
regards,
Jayagopal.

Hi,
        The source file is .swf ie(.css is converted to .swf).
         Main swf is running from local.
         Style module is from server.
I set security domain. But it throws security sanbox violation.
What should i do. Even some time if a use the local url means it thorws the same error Unable to load style(SWF is not a loadable module).
thanks,
Jayagopal.

Unable to Load NAM Module - showing PwrDown

Similar Messages

Maybe you are looking for