"Unable to load network list" instead of "Hello..."

I am using my 3G iPhone for more than 6 months.
Latest OS 2.2.1, and previous versions are causing a lot of headaches when I switching my iPhone upon arrival.
I am travelling a lot in Europe, every day; I have a Company phone, old Nokia 6300 and my private iPhone 3G.
Nokia connects network in one minute (average), but iPhone...
Instead of "Hello" I am getting always "Unable to load network list" when I switching OFF Airplane mode. There is only one button active: "Automatic" mode of network browsing. When "Automatic" is pressed, iPhone searches network for 3 to 5 minutes and lists the networks available in that specific region.
There are no automatic attempts to connect to any of these listed networks, so I need to select one of the listed networks manually, tap it again, and after some minute or two I am getting service...
I was trying different combinations of 3G and Roaming modes, but did not have any success...
All these headaches started when I performed first OS update.
I am not sure the factory OS version (probably 2.0.2) when I bought it, but only that one was free of the Carrier network browsing bugs.
I am becoming tired of tapping and tapping trying to force to connect to network my iPhone… I tried numerous times OS Restore with iTunes, but no help…
I found a topic in forum: http://discussions.apple.com/thread.jspa?threadID=1671274&tstart=270
But his topic has been archived - replies are not allowed, This question is not answered.
Any ideas?- and does anybody have this or similar problem like mine?
Jonas Jonikas
Vilnius,
Lithuania

Hi there,
I had kind of the same thing where i would arrive abroad or back in the UK after being abroad and my iPhone would take 20-30 minutes to get a signal and when loading up network selection would always get unable to display message.
Had phone replaced by apple and the issue hasnt occured in the once ive been abroad since - connected pretty much straight away.
Just wondering if you are having the issue of delayed text messages where people text you and sometimes it takes 30mins-few hours to get delivered to your phone. Or the issue of people sometimes call you and you good signal and it goes straight to voicemail??

Similar Messages

IPad 1 3G in India - Unable to load network list

I am using iPad 1 - 3G in India (Pune) for past a few months. It was working properly using a cropped BSNL 3G sim. Even in roaming I had no issues.
A few days back it first started showing only EDGE instead of 3G and now it has stopped communicating using cellular network. I get the error that "Unable to load network list". WiFi works fine. Now I have upgraded to iOS 4.3.5 (that is after the 3G stopped working).
I was under the impression that iPads are not bound to any cellular provider but there seems to be something that I do not know about Apple devices. I am new to Apple devices and have not used any before this iPad.
Any help will be appreciated.

Hi there,
I had kind of the same thing where i would arrive abroad or back in the UK after being abroad and my iPhone would take 20-30 minutes to get a signal and when loading up network selection would always get unable to display message.
Had phone replaced by apple and the issue hasnt occured in the once ive been abroad since - connected pretty much straight away.
Just wondering if you are having the issue of delayed text messages where people text you and sometimes it takes 30mins-few hours to get delivered to your phone. Or the issue of people sometimes call you and you good signal and it goes straight to voicemail??

I Just updated my iPhone 4 tp 7.1 oS. I am unable to connet to any network. I keep getting the "searching" Np Service" messages on the top let corner of the screen. I also get a notice that say " "unable to load network list. I need help...

I Just updated my iPhone 4 to 7.1 oS. I am unable to connet to any network. I keep getting the "searching" No Service" messages on the top let corner of the screen. I also get a notice that says " "Unable to load network list. I need help... How can one resolve this issue?

No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

My iphone 3g is keep searching for network, and the carrier unable to load network list , wat shall i do? Read more: My iphone 3g is keep searching for network, and the carrier unable to load network list

My iphone 3g is keep searching for network, and the carrier unable to load network list , wat shall i do?

Yes, that kind of tallies with my experience ... after 3 days of useless iPhone 3G (BTW, killing 3G on the phone and relying on acquiring AT&T 2G didn't help, it still locked onto T-Mobile with the result that it was draining battery and rebooting frequently!), I ended up visiting the local Apple Store.
Although the visit was not to resolve the iPhone problem, whilst there I happened to cycle the phone and due to the store having a local AT&T cell, the strength of the local signal meant that I finally re-acquired a AT&T 3G signal ... once locked on again the phone was fine for the next day.
Nett outcome of this is that I would prefer to lay most of the blame for this debacle on the poor state of 3G support both by AT&T (and US carriers in general), maybe exacerbated in my case by two related events (the local DNC in Denver, which saturated local AT&T cells including 3G and a proliferation of v2.0.0 and v2.0.1 firmwares on iPhones in town, which dragged cell coverage into the weeds).
It would be nice for future sanity if AT&T and T-Mobile could at least resolve the ability to acquire/release the iPhone gracefully, otherwise I'll be very sceptical of travelling back to the US with only my iPhone, as a self-employeed consultant I can't afford to be out of touch for three days again!

HT1937 iPhone 4 display "unable to load network list"

Hi Guys,
I have a iPhone 4 from Singapore and it was working perfectly fine. I came to US few days ago and get a SIM card from T-mobile. My phone can't seems to detect any network with the new SIM card. I went down to T-mobile and they replace a new SIM for me but the problem still persist. The top left corner of the phone display "No service", then I went into Settings>Carrier I tried to turn off the automatic Network selection and a prompt "Unable to load network list" appear, after I select "OK" the automatic setting switch back to ON.
I look around on this site and tried a few recommendation, none work so far. Things I tried:
- Restore to the phone via iTunes and restore back up
- Restore to the phone via iTunes and set up as new phone
- Settings>General>Reset>Reset Network Settings
- Switched off the phone and connect to my laptop with iTunes already running
- With my phone connected to iTunes, I switched it off and on
My wifi connection is fine, and I tested my SIM card in my friend's phone it works fine too.
My phone profiles under About:
- Network: Not available
- Version: 5.1.1 (9B208)
- Carrier: Carrier 12.0
- Modem Firmware: 04.12.01
Anyone can give me advices on how to get my network connection back?
Thank you!
PS: I had never jailbreak my phone before.

I would try reseating the SIM and if that does not work, replace the SIM.

IPhone 4 Unable to Load Network List & No SIM Connectivity Problems

Hi,
I have an iPhone 4. It has been working fine. Only recently, the phone goes off network giving an error message saying that the phone has lost the network. When trying to update the carrier list, the message "Unable to Load Network List" pops up. A while later, the phone sometimes gives a message: No SIM.
I tried restoring the phone's original settings and the problem is still there.
Any recommendations?
Thanks

I would try reseating the SIM and if that does not work, replace the SIM.

Help "unable to load network list"?

After updating my iphone 3gs to ios 4.3.3 my phone's cellular serice does'nt work anymore, when I go to Setting>Carrier it say's "Unable to load network list". But anything else works fine.
Please guysss if someone knows how to fix this please let me know..

Sorry not sure why your new sim card isn't supported...not sure if it helps but I had my laptop connected to wifi at the time also, but I don't think it should matter. Its worth a try connecting to internet with ITunes on, connect your phone and then turn it on and see what happens.

Iphone 3gs unable to load network list

not jailbroken or anything like that...baseband is 05.16.05..just keeps saying searching and then unable to load network list...updated to ios5 and still having same problem...
carrier bell 11.0
model MB716LL
version 5.0(9A334)
please help

To make sure it is not firmware related, set it up as new device: How to set up your iPhone or iPod touch as a new device without using a backup.
If still no change after that, you should get it serviced or looked at by visiting an Apple Store: Apple - Support - Service Answer Center

"Unable to load network list"

My wife & I have two identical Verizon iPhone 5's fully updated. We traveled to Mexico, & I noticed my phone sending me offer messages from the local carrier Movistar on which it was locked & roaming for voice only, data/SMS turned off. I checked my wife's phone, which was also on voice only, & it was roaming on Telcel, & no annoying messages. I tried to turn off the Automatic Carrier selection on each phone, but both said "Unable to load network list." So I turned each one back to Automatic, & my phone locked again to roaming of Movistar, & her's back to Telcel.
I can't get to choose the roaming service as both phones refuse to load the network service. And for some reason each one locks to a different carrier when side y side. Neither phone was ever hacked and the SIM is the original Verizon.
Any clues anyone?

Hi there,
I had kind of the same thing where i would arrive abroad or back in the UK after being abroad and my iPhone would take 20-30 minutes to get a signal and when loading up network selection would always get unable to display message.
Had phone replaced by apple and the issue hasnt occured in the once ive been abroad since - connected pretty much straight away.
Just wondering if you are having the issue of delayed text messages where people text you and sometimes it takes 30mins-few hours to get delivered to your phone. Or the issue of people sometimes call you and you good signal and it goes straight to voicemail??

"Unable to load network list" on new sim card overseas on unlocked iphone 4

I recently bought an Iphone4 (unlocked) from australia. While traveling overseas I inserted a new sim and got the message "unable to load network list", and could not activate my new sim card. Could not find the answer on the discussion board here but got in touch with my provider back in oz who helped me.
Solution: You need your laptop with Itunes on it. Turn the phone off, then connect to your laptop with Itunes already running and then turn the phone on. When you click on your phone icon in Itunes it will say "Congratulation, your iphone is unlocked". You can then eject your phone and your new sim is activated.
Hope this helps

Sorry not sure why your new sim card isn't supported...not sure if it helps but I had my laptop connected to wifi at the time also, but I don't think it should matter. Its worth a try connecting to internet with ITunes on, connect your phone and then turn it on and see what happens.

Unable to load network list, unable to load network list

after Iphone went inyo shop for unlock sim pin, (the kids played with it) it seemed to work
but home found out trhat there is no signal showing
it gives message unable to load network list

Hi there,
I had kind of the same thing where i would arrive abroad or back in the UK after being abroad and my iPhone would take 20-30 minutes to get a signal and when loading up network selection would always get unable to display message.
Had phone replaced by apple and the issue hasnt occured in the once ive been abroad since - connected pretty much straight away.
Just wondering if you are having the issue of delayed text messages where people text you and sometimes it takes 30mins-few hours to get delivered to your phone. Or the issue of people sometimes call you and you good signal and it goes straight to voicemail??

IPhone 4 unable to load network list

I bought a iPhone 4 unlocked by apple so I took It to Poland worked for a long time (activated on telus it Poland using it on Play ) and all of a sudden (it happened during a lightning storm so can it havesomething to do with that( but my mom was talking to people at the same time I didn't even use mine ( her phone is on Play too))) so plz help

Is there any way to fix a fried (zapped wat ever its called) antenna (will apple fix for you (if its fixable)(do you have to pay or is it under warranty ) and if apple won't fix it can you fix it your self or (I'm not saying your suggestion that's the antenna isn't right ) is there any other suggestions of what happened or no (another detail of what happened was I mostly was t urning my phone into airplane mode and turning airplane mode off in the storm but what's weird my mom was talking the whole way on her phone which again has the same carrier (we were driving during when it happened ) (oh also is there anyway (instead of calling to email apple and ask )

Open Directory: "Unable to load replica list"

I'm currently running Mavericks Server 3.1 on my Mac Mini at the home network. I had some issues with the client logins and went for local accounts on the clients instead. Today I finally wanted to fix the problem and go all Open Directory. But the Open Directory service was shut off when I opened the server software. I tried to turn it on but got a message saying "Unable to load replica list". I updated the software to the latest 3.1 but are still having the same issue. I never had any replica list, I only had a standard one from the start, but it seems I can't do anyhing there now.
LDAP log:
Mar 21 22:48:38 xxYY.com slapd[172]: @(#) $OpenLDAP: slapd 2.4.28 (Nov 12 2013 12:02:47) $
[email protected]:/private/var/tmp/OpenLDAP/OpenLDAP-491.1~1/servers/slapd
Mar 21 22:48:38 xxYY.com.com slapd[172]: daemon: SLAP_SOCK_INIT: dtblsize=8192
Mar 21 22:48:39 xxYY.com.com slapd[172]: TLS: found identity in keychain using identity preference.
Mar 21 22:48:42 xxYY.com.com slapd[172]: slap_add_listener: opened additional listener 'ldaps:///'
Mar 21 22:48:42 xxYY.com.com slapd[172]: bdb_monitor_db_open: monitoring disabled; configure monitor database to enable
Mar 21 22:48:44 xxYY.com.com slapd[172]: slapd starting
Mar 21 22:48:44 xxYY.com.com slapd[172]: daemon: posting com.apple.slapd.startup notification
Mar 21 22:48:54 xxYY.com.com slapd[172]: => bdb_idl_delete_key: c_del id failed: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock (-30994)
Mar 21 22:48:54 xxYY.com.com slapd[172]: conn=1022 op=3: attribute "entryCSN" index delete failure
Mar 21 22:50:02 xxYY.com.com slapd[172]: => bdb_idl_delete_key: c_get failed: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock (-30994)
Mar 21 22:50:02 xxYY.com.com slapd[172]: conn=1042 op=3: attribute "entryCSN" index delete failure
I don't understand any of this other than the obvious failure words. Can anyone understand this and help me here?

This procedure is a diagnostic test. It makes no changes to your data. If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Please triple-click anywhere in the line below on this page to select it:
sudo /usr/libexec/slapd -Tt | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. You don't need to post the warning.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.

OpenDirectory: Unable To Load Replica List, after Time Machine Restore

I followed the following instructions provided on another thread (Open Directory: "Unable to load replica list"):
Many Open Directory problems can be resolved by taking the following steps.
1. The OD master must have a manually-assigned IP address on the local network, not a dynamic address.
2. The primary DNS server used by the master must be 127.0.0.1 (that is, itself) unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
3. Verify that the master's hostname matches its domain name by running the shell command
sudo changeip -checkhostname
4. Follow these instructions to rebuild the Kerberos configuration on the master.
5. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases.
6. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
7. Reboot the master and the clients.
8. Don't log in to the server with a network user's account.
9. Export all OD users, delete them, turn off OD, turn it back on, and import. Ensure that the UID's are in the 1001+ range.
And got the following results:
Check.
Check.
Resulted in the following console output: The names match. There is nothing to change.
The touch command resulted in "No such file or directory." I circumvented this by manually creating the migration directory, then running the command again. The killall command failed saying "No matching processes were found." Opening the server app after that shows no change.
My trusted certificate was apparently not restored from the backup, as it was no longer listed. I switched to the self-signed one until a CSR can be made.
I'm not clear on what this actually means. There is no unbind or rebind functionality in the server app. Not to mention that my users or groups are no longer listed.
Nothing changed after rebooting the server.
Have always logged into server using the local server admin account.
Where is this done? I don't see any place to do this in the Server App.
At this point I'm suspecting that there are some serious Time Machine recovery bugs with server, as I have tried with multiple different restore points all ending in the exact same result.
Any recommendations on where to go from here? I would love to do a fresh install, but need to archive the data from the server first. Unfortunately, I don't see how I can export each users' data without being able to log in as them.

There seem to be some issues with PostgreSQL not running. Marketcircle Daylite and Billings Pro also won't start, and are showing errors to that effect.

Facebook app unable to load friends list

Hello everyone. About 3 days ago my facebook app stopped loading my friends list. I get a message saying "your friends list is unavailable". Because of this, I've been unable to post on someones wall, send a msg, or poke. The only thing I can do is upate my status, upload photos, and respond to a post someone sends me. I've search for a fix but can't find one. I've restarted the phone, reinstalled the app. Nothing is fixing it.

Only 2 things I can think of has worked for me when I had similar problem. 1. Clear Cache. 2. Log out of FB on your BB then log back in. You get to both of these in FB by pressing the menu key then scroll down to options and select one. Hope this helps.
Edit: One afterthought was to go to My Account in FB on your pc and click on the Mobile Tab. Then re-submit the mobile number for activation. It's worth a try.
Message Edited by mistergadget on 02-17-2009 09:20 AM

"Unable to load network list" instead of "Hello..."

Similar Messages

Maybe you are looking for