Unable to load OS bound to a domain after power-outage

I currently manage 200 2013 iMac but since installing Yosemite I've noticed that after the macs are joined to the domain and a network user is using the machine and a power outage occurs ALL iMac running Yosemite will not boot up. The boot process reaches about 30 percent and stays on the grey apple logo screen. After extensive troubleshooting we found that this only occurs when a user is logged in when the power outage occurs. However if the power outage occurs and the units are not being used by a network user the computer boots up fine. We completed a fresh install created a local user without adding it to the domain. We then logged in with the local user mimic'd a power-outage and the computer booted up fine. I have done extensive troubleshooting noticed that the issue does not occur with local users only users authenticated on a domain.
Note: We also noticed that if we deleted network users from the user folder and then performed the power outage and the unit loads the OS fine.
Any help with this is greatly appreciated...

Insert the Mac OS X 10.4 installation disk into the drive, and then restart the computer with the Option key held down. If you are able to successfully start up from the drive, install Mac OS X 10.4.
(22892)

Similar Messages

Unable to load itunes store on iphone 4S after updating to ios 7

After I updated my iphone 4S to ios 7, I am unable to load the itunes store on my phone. It spins like it is loading and then stops, but the screen is blank. Does anyone know what might cause this?

Are you talking about the Search screen? If so, it has been hung up for the last 24 hours....undoubtedly server related. I do not have IOS 7 yet, but it is doing the same thing on my iPhone....
I'm waiting until the weekend to try it again. No point in getting crazy over it.
Cheers,
GB

Unable to get my tabs back after power outage and "restore previous session" doesn't show up.

Well, I've spent most of my day trying to figure out how to fix this. My power unexpectedly went out overnight and I left my computer on. When I woke up, i saw that the computer was off. So I started my computer, but when I went to get onto Firefox, none of my windows and tabs were there. (and I did have a ton of tabs open.) There wasn't even a "Restore Previous Session" icon to press on the Firefox homepage or a "Well, this is embarrassing" window. I tried opening "sessionstore.js" and "sessionstore.bak", but then a window came up titled "Windows Script Host" and said "Microsoft JScript Compilation Error." Then all there is to do is press "Ok". (By the way, at another time today when I tried opening a .js file, it said "Windows can't open this file" and it wanted me to choose the program I wanted to use to open the file, or use the internet to find a program. I chose Notepad, but then it was just a bunch of letters, words and symbols.)
I've also tried entering "about:sessionrestore" to get my windows and tabs back and then it says "Well, this is embarrassing." and "Firefox is having trouble recovering your windows and tabs." And there are no windows and tabs showing up below that sentence, with check marks, like it is when session restore has worked for me in the past. The only thing that worries me is that I did restart my computer between when I first started it this morning and now, when I'm writing this. I wanted to see if the "Restore Previous Session" icon would bring up my missing windows and tabs from before. But all it brought up automatically were the current windows and tabs that I have open right now. So now I'm wondering if I've permanently lost those tons of tabs that I had open before the power went out.
The other thing is that when I first got onto Firefox today, I could see all of my history from the days, weeks, and months past. Now I can only see today's history. I know I pressed something when I was trying to fix things but I don't remember what I pressed. Maybe that changed whether or not I could see the previous months' history. I did try "places.sqlite", "places.sqlite-shm" and "places.sqlite-wal" to restore my history, but again it said "Windows can't open this file" and it wanted me to choose a program to open the file. So again I chose Notepad, and it was just a bunch of letters, numbers, and symbols.
Hopefully someone may have an answer for me. Thanks!

Yes I can understand you being confused there is an awful lot of information you need to take in and learn as you encounter such a situation. I will try to expand my explanation to cover the points you ask.
''right click the file and select "restore previous versions", right?''
That is correct when using Windows to try to recover for instance files where the working fie is corrupted, but a previous version worked
If you have no previous versions available from Windows you need to work on whatever you do have. With any file restore operation it is always a good idea to make copies of not only the originals but also the restored files.
If you restored the ''places.sqlite'' with Windows that could possibly have resulted in a copy overwriting your working file that is even worse than the original file.
When you restore a file using the Windows OS it restores the files in their ordinary working location and they should function as expected without needing to do anything else. Generally it is probably best to try such restores when the files are not in use and in this instance that means when Firefox is closed.
For the benefit of any other readers of this thread note : <br />The places.sqlite is in the Firefox profile and easiest to find before closing down Firefox as the ''troubleshooting information page'' (''about:support'') may be used to find it.
* [[Profiles - Where Firefox stores your bookmarks, passwords and other user data#w_how-do-i-find-my-profile]]_how-do-i-find-my-profile
The ''places.sqlite'' database is the only file Firefox itself has with the full ''History'' information in it. The database also contains bookmarks but Firefox should have some other backups of those. If the database is deleted Firefox will restore the database but all it can do is add back bookmarks information from its backups the History is lost.
There is almost no chance of getting the History back unless there is another copy of that database. Either one Windows is able to recreate, or one that was somehow created by another method, that normally being the user deliberately making a manual backup of your profile or places file in advance. Or maybe having in place other backup procedures.
'' am I supposed to double-click the file?''
That is not going to help in these circumstances. There are advanced methods of studying the files but right clicking does not help in this instance.
Open tabs information is stored in the series of files ''sessionstore.*'' It may take rather a lot of messing about to to get any useful information out of whatever files you have. It would normally probably be a lot quicker just going back to the sites concerned, but that is made more difficult if you have overwritten the History database so you may need to try if the tabs were important to you. I can give more details in another post if you need to try that
We could have a lot more luck with your bookmarks. Did you bookmark most of the sites concerned ? If so then at least you have a good chance of finding the sites again.
Have you already got a fairly complete listing of your bookmarks in the Firefox bookmarks library/menu ? If you need to try to get back lost bookmarks that existed in the last few days but not are not present right now make a backup copy
*Of the profile folder called '''''bookmarkbackups''''' ( With its contents ! )
* ''places.sqlite'' Remember whenever attempting restoring bookmarks always backup the database file ''places.sqlite'' first.

Unable To Start TimesTen after Power Outage

TimesTen 7.0.5.0.0 Solaris 64-bit
Platform: Solaris 10
Hardware: SUN Netra CP3260 Blade
We had a brief power outage in our lab a couple of days a go. After the machines came back up, I noticed that we couldn't start TimesTen on three of the machines. When trying to start via ttDaemonAdmin I see the following message:
[root]machine1:/ ttDaemonAdmin -start -force
Can't obtain admin user name
Can't obtain admin user name
[root]machine1:/
Does anyone know what this error means and how to fix it?

I originally reported this issue against tt 7.0.5.0.0. However 2 machines with the problem are 7.0.3.1.0 and 1 machine is 7.0.5.0.0. I got 2 machines going again by uninstalling TimesTen and re-installing it. I'm keeping the third one in this state in the hopes of finding another way to recover it besides uninstall and re-install.
[root]kansparc54116:/ ldd `which ttDaemonAdminCmd`
libtten.so => /TimesTenInstance/lib/libtten.so
librt.so.1 => /lib/64/librt.so.1
libpthread.so.1 => /lib/64/libpthread.so.1
libthread.so.1 => /lib/64/libthread.so.1
libsocket.so.1 => /lib/64/libsocket.so.1
libnsl.so.1 => /lib/64/libnsl.so.1
libm.so.1 => /lib/64/libm.so.1
libc.so.1 => /lib/64/libc.so.1
libdl.so.1 => /lib/64/libdl.so.1
libttco.so => /TimesTenInstance/lib/libttco.so
libaio.so.1 => /lib/64/libaio.so.1
libmd.so.1 => /lib/64/libmd.so.1
libmp.so.2 => /lib/64/libmp.so.2
libscf.so.1 => /lib/64/libscf.so.1
libdoor.so.1 => /lib/64/libdoor.so.1
libuutil.so.1 => /lib/64/libuutil.so.1
libgen.so.1 => /lib/64/libgen.so.1
libm.so.2 => /lib/64/libm.so.2
/platform/SUNW,Netra-CP3260/lib/sparcv9/libc_psr.so.1
/platform/SUNW,Netra-CP3260/lib/sparcv9/libmd_psr.so.1
[root]kansparc54116:/
[root]kansparc54116:/ ttVersion
TimesTen Release 7.0.3.1.0 (64 bit Solaris) (tt70:15000) 2007-10-30T22:17:07Z
Instance admin: root
Instance home directory: /TimesTen/tt70
Daemon home directory: /var/TimesTen/tt70
[root]kansparc54116:/
[root]kansparc54116:/
[root]kansparc54116:/ ttDaemonAdmin -start -force
Can't obtain admin user name
Can't obtain admin user name
[root]kansparc54116:/
[root]kansparc54116:/ ls -l /TimesTenInsta*
lrwxrwxrwx 1 root other 14 May 22 21:13 /TimesTenInstance -> /TimesTen/tt70/
[root]kansparc54116:/

450 Host Down for one Domain after they've moved IPs

Has anyone else seen this?
Where a domain you're system sends mail to regularly suddenly comes up
with all 450.
Check if they've changed their MX or matching A records. I just
encountered an issue where the DNS change had propagated just fine. I
could do NSLookups on the host server to get the correct/new entries,
but GWIA didn't want to see it until after a restart.
This GWIA (8.02hp2 on SLES10sp3 -64bit) had gone more than 10 times the
TTL without refreshing for a connection it.
Andy Konecny
KonecnyConsulting.ca in Toronto
Andy's Profile: http://forums.novell.com/member.php?userid=75037

In article <[email protected]>, Bob-O-Rama wrote:
> Are you seeing this for existing, queued outbound messages? Or for new
> messages?
>
Both. The original ones had timed out and failed
> From the server hosting the GWIA, what does nslookup say for the A and
> MX record?
>
The new and correct entries
I checked the A record first, then the MX (remembering exact 'set type'
syntax before coffee made it second choice ;) Only the A record was
changed.
incorrect entry had been put in at some point before a power
outage(Wednesday night, complete with generator failure). After power
outage, everything came up with that bad entry. Discovery the bad entry
in the morning (Thursday) and get it fixed. Default TTL of 8 hours was
used for all MX related records. Leave client stating this mail flow (to
domain.net) should start working overnight, but they don't get back to me
until Monday morning when this problem is still happening. As this
system is set for a 4 day limit on attempts, we were clearly into new
messages as the original burst had timed out with transfer failed
statuses.
Andy Konecny
KonecnyConsulting.ca in Toronto
Andy's Profile: http://forums.novell.com/member.php?userid=75037

Unable to load the specified offline registry hive when rejoining the domain

I have a Windows Server 2008 R2 Ent member server that we needed to clone. So we removed it from the domain, cloned it, and when we went back to join it to the domain it we get a error:
The Following error occurred attempting to join the domain: Unable to load the specified offline registry hive. Please ensure you have access to the specified path location and permissions to modify its contents. Running as an elevated administrator
may be required.
There is nothing in event viewer and no other error message then this. I can look at my domain controller and i do see a computer object is created but its like the member server either never gets the message that its done or it can't write to the registry.
I've disabled the firewall. I've tried to verify permission in regedit, to the best i know, and i still get this error.
We have also tried multiple local user accounts, multiple domain admin accounts, renamed the server, changed the workgroup its in. even ran a few registry cleaners.
Nothing works. I need help since this server has to be online 6am Monday morning.

Hi,
To add the local administrators in the User Rights assignments
1) Start>Run>gpedit.msc
2) Computer Configuration>Windows Settings>Security Settings>Local Policies>User Rights Assignments
3) Double click on Back up files and directories and add the Administrators.
4) Double click on Restore files and directories and add the Administrators.
5) Close the window and reboot the machine.
6) Try to add the machine to the domain.
If the issue persist, Reset the security database.
1) Open MMC
2) Add Security Configuration and Analysis tool
3) Right click Security Configuration and Analysis in the left pane
4) Select open database
5) In the new database, type in secnew.sdb, click ok.
6) Select setup defltbase.inf as the template to import from C:\Windows\inf, click ok.
7) Rightclick Security Configuration and Analysis in the left pane again
8) Select configure computer
9) Reboot the machine.
10) Try adding the machine to the domain.
Hope this helps!
Best Regards
Elytis Cheng
Elytis Cheng
TechNet Community Support
By the way folks, this is the FIX that worked for me. No need to go re-installing the OS
Paul E Coz

Unable to Load Metadata (Error in shared.context.ContextLoader in startup)

Hi,
I am currently installing fixes on an environment, and every time a patch was installed the application server starts up. The application starts up successfully until I installed 8424662. I still don't know if this is the patch that causes the error, but here's the part of the log that states the error:
- 2010-03-29 07:31:12,030 [Thread-1] ERROR (shared.context.ContextLoader) Unable to load metadata for package com.splwg.base.domain.common.masterConfiguration
java.lang.NullPointerException
     at java.io.Reader.<init>(Reader.java:61)
     at java.io.InputStreamReader.<init>(InputStreamReader.java:55)
     at com.splwg.shared.context.PackageMetaInfoLoader.getManagedObjectDataAndExtractHashInfo(PackageMetaInfoLoader.java:53)
     at com.splwg.shared.context.PackageMetaInfoLoader.getContextEntities(PackageMetaInfoLoader.java:48)
     at com.splwg.shared.context.PackageMetaInfoLoader.read(PackageMetaInfoLoader.java:44)
     at com.splwg.shared.context.ContextLoader.loadFromStream(ContextLoader.java:90)
     at com.splwg.shared.environ.ContextManagedObjectSet.loadFromStream(ContextManagedObjectSet.java:120)
     at com.splwg.shared.environ.ContextManagedObjectSet.loadFromStream(ContextManagedObjectSet.java:107)
     at com.splwg.shared.environ.ContextManagedObjectSet.loadAllContextManagedObjects(ContextManagedObjectSet.java:72)
     at com.splwg.base.support.context.ContextFactory.loadManagedObjectForApplication(ContextFactory.java:194)
     at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:106)
     at com.splwg.base.support.context.ContextFactory.buildContext(ContextFactory.java:90)
     at com.splwg.base.support.context.ContextFactory.createDefaultContext(ContextFactory.java:498)
     at com.splwg.base.web.startup.DeferredXAIStartup.run(DeferredXAIStartup.java:73)
     at java.lang.Thread.run(Thread.java:595)
- 2010-03-29 07:31:14,873 [main] INFO (web.startup.SPLWebStartup) Application Context shutdown successfully
Any help on this problem is greatly appreciated. Thank you so much!

Patch 8424662 incorporates an entry in contextManagedObjects.xml that points to a class com.splwg.base.domain.common.masterConfiguration but this class is not yet present in spl-base.jar file. Patch 8711158 should be installed, since it contains this class.

Unable to load Oracle.DataAccess

Hi ,
I have created a website project on .net framework 4.0 in Visual Studio 2010 . But I am unable to add reference the Oracle.DataAccess dll. It is continously throwing the error " unable to load assembly Oracle.DataAccess . The system cannot find the file specified. "
But when I tried adding the reference in a web application project , it gets added. But when run the project it is throwing the same error. On the web page the error thrown is this :
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess' could not be loaded.
=== Pre-bind state information ===
LOG: User =***********
LOG: DisplayName = Oracle.DataAccess
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: Oracle.DataAccess | Domain ID: 2
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
Stack Trace:
[BadImageFormatException: Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +39
System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) +132
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +144
System.Reflection.Assembly.Load(String assemblyString) +28
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46
Any help on this , please.. I have been trying all sorts of things and nothing seems to workl.

BadImageFormatException occurs when you have a bit mismatch.
1) What is the TargetCPU set to when you compiled?
2) Are you running the app on 32 bit or 64 bit OS?
3) Confirm whether the app is running as 32 bit or 64 bit in the problem environment (open task manager, click the process tab, is there a *32 next to the name?)
4) Did you install 32 bit Oracle client or 64 bit Oracle client?
Cheers,
Greg

Wrapped: Unable to load class "com.cache.DBCacheStore"

Hi,
I was trying out a sample application for using DBCacheStore and getting the following error...
(Wrapped: Unable to load class "com.cache.DBCacheStore" using sun.misc.Launc
her$AppClassLoader@13f5d07
<class-scheme>
<class-name>com.cache.DBCacheStore</class-name>
</class-scheme>) java.lang.ClassNotFoundException: com.cache.DBCacheStore
I have the CLASSPATH set to the location of DBCacheStore.class file both in cache-server.cmd and in my application startup JVM params. But still i am not able to resolve this issue. However i am still able to hit the database and get the values for the first call and on sub-sequent call, i am able to retrive the value from cache. I also encounter the below error, after i have retrieved the values from cache...
2010-11-10 15:08:31.553/29.671 Oracle Coherence GE 3.6.0.0 <Error> (thread=Distr
ibutedCache, member=1): Terminating PartitionedCache due to unhandled exception:
java.lang.UnsupportedOperationException
2010-11-10 15:08:31.553/29.671 Oracle Coherence GE 3.6.0.0 <Error> (thread=Distr
ibutedCache, member=1):
java.lang.UnsupportedOperationException
at java.util.Collections$UnmodifiableMap.put(Collections.java:1285)
As the exception occurs, the cluster gets restarted and when i re-run the application, it again goes for a DB hit instead of cache hit.
Note : I have the cache-server.cmd running in one the console window.
Following is my cache-config.xml file content...
<?xml version="1.0" encoding="UTF-8" ?>
<cache-config>
     <caching-scheme-mapping>
          
          <cache-mapping>
               <cache-name>Virtual*</cache-name>
               <scheme-name>distributed-db-backed</scheme-name>
          </cache-mapping>
     </caching-scheme-mapping>
     <caching-schemes>
          
          <distributed-scheme>
               <scheme-name>distributed-db-backed</scheme-name>
               <service-name>DistributedCache</service-name>
               <backing-map-scheme>
                    <read-write-backing-map-scheme>
                         <internal-cache-scheme>
                              <class-scheme>
                                   <class-name>
                                        com.tangosol.util.ObservableHashMap
                                   </class-name>
                              </class-scheme>
                         </internal-cache-scheme>
                         <cachestore-scheme>
                              <class-scheme>
                                   <class-name>
                                        com.cache.DBCacheStore
                                   </class-name>
                                   <init-params>
                                        <init-param>
                                             <param-type>
                                                  java.lang.String
                                             </param-type>
                                             <param-value>
                                                  EMP_ADDR_VIEW
                                             </param-value>
                                        </init-param>
                                   </init-params>
                              </class-scheme>
                         </cachestore-scheme>
                         <read-only>false</read-only>
                         
                         <write-delay-seconds>0</write-delay-seconds>
                    </read-write-backing-map-scheme>
               </backing-map-scheme>
               <listener />
               <autostart>true</autostart>
          </distributed-scheme>
     </caching-schemes>
</cache-config>
Thanks
Karthik
Edited by: user1073902 on Nov 10, 2010 4:25 AM

Hello Noah,
     I have listed the contents of log file ( for both cache-server.cmd and the client application ).
cache-server.cmd Log File
=========================
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) Server VM (build 16.3-b01, mixed mode)
2010-11-11 09:51:49.634/0.236 Oracle Coherence 3.6.0.0 <Info> (thread=main, memb
er=n/a): Loaded operational configuration from "jar:file:/E:/coherence/lib/coher
ence.jar!/tangosol-coherence.xml"
2010-11-11 09:51:49.634/0.236 Oracle Coherence 3.6.0.0 <Info> (thread=main, memb
er=n/a): Loaded operational overrides from "jar:file:/E:/coherence/lib/coherence
.jar!/tangosol-coherence-override-dev.xml"
2010-11-11 09:51:49.634/0.236 Oracle Coherence 3.6.0.0 <D5> (thread=main, member
=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not
specified
2010-11-11 09:51:49.649/0.251 Oracle Coherence 3.6.0.0 <D5> (thread=main, member
=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
2010-11-11 09:51:49.649/0.251 Oracle Coherence 3.6.0.0 <D6> (thread=main, member
=n/a): Loaded edition data from "jar:file:/E:/coherence/lib/coherence.jar!/coher
ence-grid.xml"
Oracle Coherence Version 3.6.0.0 Build 17229
Grid Edition: Development mode
Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved.
2010-11-11 09:51:49.885/0.487 Oracle Coherence GE 3.6.0.0 <Info> (thread=main, m
ember=n/a): Loaded cache configuration from "file:/E:/bea/user_projects/workspac
es/workSpaceStudio/coh/cache-config.xml"
2010-11-11 09:51:50.231/0.833 Oracle Coherence GE 3.6.0.0 <D4> (thread=main, mem
ber=n/a): TCMP bound to /10.144.32.78:8088 using SystemSocketProvider
2010-11-11 09:51:53.786/4.388 Oracle Coherence GE 3.6.0.0 <Info> (thread=Cluster
, member=n/a): Created a new cluster "mycluster" with Member(Id=1, Timestamp=201
0-11-11 09:51:50.231, Address=10.144.32.78:8088, MachineId=47694, Location=site:
XyzT.CORP.Xyz.IN,machine:hdchshocms2026,process:4472, Role=CoherenceServer, Edit
ion=Grid Edition, Mode=Development, CpuCount=2, SocketCount=2) UID=0x0A90204E000
0012C392B0817BA4E1F98
2010-11-11 09:51:53.786/4.388 Oracle Coherence GE 3.6.0.0 <Info> (thread=main, m
ember=n/a): Started cluster Name=mycluster
Group{Address=224.0.0.1, Port=5455, TTL=4}
MasterMemberSet
ThisMember=Member(Id=1, Timestamp=2010-11-11 09:51:50.231, Address=10.144.32.7
8:8088, MachineId=47694, Location=site:XyzT.CORP.Xyz.IN,machine:hdchshocms2026,p
rocess:4472, Role=CoherenceServer)
OldestMember=Member(Id=1, Timestamp=2010-11-11 09:51:50.231, Address=10.144.32
.78:8088, MachineId=47694, Location=site:XyzT.CORP.Xyz.IN,machine:hdchshocms2026
,process:4472, Role=CoherenceServer)
ActualMemberSet=MemberSet(Size=1, BitSetCount=2
Member(Id=1, Timestamp=2010-11-11 09:51:50.231, Address=10.144.32.78:8088, M
achineId=47694, Location=site:XyzT.CORP.Xyz.IN,machine:hdchshocms2026,process:44
72, Role=CoherenceServer)
RecycleMillis=1200000
RecycleSet=MemberSet(Size=0, BitSetCount=0
TcpRing{Connections=[]}
IpMonitor{AddressListSize=0}
2010-11-11 09:51:53.833/4.435 Oracle Coherence GE 3.6.0.0 <D5> (thread=Invocatio
n:Management, member=1): Service Management joined the cluster with senior servi
ce member 1
2010-11-11 09:51:54.085/4.687 Oracle Coherence GE 3.6.0.0 <D5> (thread=Distribut
edCache, member=1): Service DistributedCache joined the cluster with senior serv
ice member 1
2010-11-11 09:51:54.101/4.703 Oracle Coherence GE 3.6.0.0 <D6> (thread=Distribut
edCache, member=1): Service DistributedCache: sending PartitionConfig ConfigSync
to all
2010-11-11 09:51:54.116/4.718 Oracle Coherence GE 3.6.0.0 <Info> (thread=main, m
ember=1):
Services
ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Vers
ion=3.6, OldestMemberId=1}
InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1,
OldestMemberId=1}
PartitionedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=
enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=257, BackupPartit
ions=0}
Started DefaultCacheServer...
2010-11-11 09:55:41.209/231.811 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster
, member=1): Member(Id=2, Timestamp=2010-11-11 09:55:41.216, Address=10.144.32.7
8:8090, MachineId=47694, Location=site:XyzT.CORP.Xyz.IN,machine:hdchshocms2026,p
rocess:5304, Role=XyzCacheDatabaseCache) joined Cluster with senior member 1
2010-11-11 09:55:41.209/231.811 Oracle Coherence GE 3.6.0.0 <D6> (thread=Cluster
, member=1): TcpRing connecting to Member(Id=2, Timestamp=2010-11-11 09:55:41.21
6, Address=10.144.32.78:8090, MachineId=47694, Location=site:XyzT.CORP.Xyz.IN,ma
chine:hdchshocms2026,process:5304, Role=XyzCacheDatabaseCache)
2010-11-11 09:55:41.209/231.811 Oracle Coherence GE 3.6.0.0 <D6> (thread=Cluster
, member=1): TcpRing connected to Member(Id=2, Timestamp=2010-11-11 09:55:41.216
, Address=10.144.32.78:8090, MachineId=47694, Location=site:XyzT.CORP.Xyz.IN,mac
hine:hdchshocms2026,process:5304, Role=XyzCacheDatabaseCache)
2010-11-11 09:55:41.287/231.889 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster
, member=1): Member 2 joined Service Management with senior member 1
2010-11-11 09:55:41.553/232.155 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster
, member=1): Member 2 joined Service DistributedCache with senior member 1
2010-11-11 09:55:41.553/232.155 Oracle Coherence GE 3.6.0.0 <Error> (thread=Dist
ributedCache, member=1): BackingMapManager com.tangosol.net.DefaultConfigurableC
acheFactory$Manager: failed to instantiate a cache: VirtualCache
2010-11-11 09:55:41.553/232.155 Oracle Coherence GE 3.6.0.0 <Error> (thread=Dist
ributedCache, member=1):
(Wrapped: Unable to load class "com.cache.DBCacheStore" using sun.misc.Launc
her$AppClassLoader@13f5d07
<class-scheme>
<class-name>com.cache.DBCacheStore</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>EMP_ADDR_VIEW</param-value>
</init-param>
</init-params>
</class-scheme>) java.lang.ClassNotFoundException: com.cache.DBCacheStore
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.tangosol.run.xml.XmlHelper.createInstance(XmlHelper.java:2487)
at com.tangosol.net.DefaultConfigurableCacheFactory.instantiateAny(Defau
ltConfigurableCacheFactory.java:3256)
at com.tangosol.net.DefaultConfigurableCacheFactory.instantiateCacheStor
e(DefaultConfigurableCacheFactory.java:3106)
at com.tangosol.net.DefaultConfigurableCacheFactory.instantiateReadWrite
BackingMap(DefaultConfigurableCacheFactory.java:1674)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureBackingMap(
DefaultConfigurableCacheFactory.java:1429)
at com.tangosol.net.DefaultConfigurableCacheFactory$Manager.instantiateB
ackingMap(DefaultConfigurableCacheFactory.java:3904)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.partitionedService.PartitionedCache$Storage.instantiateResourceMap(Partition
edCache.CDB:21)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.partitionedService.PartitionedCache$Storage.setCacheName(PartitionedCache.CD
B:25)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.partitionedService.PartitionedCache$ServiceConfig$ConfigListener.entryInsert
ed(PartitionedCache.CDB:17)
at com.tangosol.util.MapEvent.dispatch(MapEvent.java:266)
at com.tangosol.util.MapEvent.dispatch(MapEvent.java:226)
at com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.jav
a:556)
at com.tangosol.util.ObservableHashMap.dispatchEvent(ObservableHashMap.j
ava:229)
at com.tangosol.util.ObservableHashMap$Entry.onAdd(ObservableHashMap.jav
a:270)
at com.tangosol.util.SafeHashMap.put(SafeHashMap.java:244)
at com.tangosol.coherence.component.util.ServiceConfig$Map.put(ServiceCo
nfig.CDB:43)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.partitionedService.PartitionedCache$StorageIdRequest.onReceived(PartitionedC
ache.CDB:45)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.G
rid.onMessage(Grid.CDB:11)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.G
rid.onNotify(Grid.CDB:33)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.PartitionedService.onNotify(PartitionedService.CDB:3)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.partitionedService.PartitionedCache.onNotify(PartitionedCache.CDB:3)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassNotFoundException: com.cache.DBCacheStore
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.tangosol.util.ExternalizableHelper.loadClass(ExternalizableHelper
.java:3011)
at com.tangosol.run.xml.XmlHelper.createInstance(XmlHelper.java:2421)
... 22 more
2010-11-11 09:55:41.631/232.233 Oracle Coherence GE 3.6.0.0 <D5> (thread=Distrib
utedCache, member=1): 3> Transferring primary PartitionSet{0, 1, 2, 3, 4, 5, 6,
7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,
28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67,
68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,
88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 1
06, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 1
22, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 1
38, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 1
54, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 1
70, 171, 172, 173, 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 1
86, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 2
02, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214, 215, 216, 217, 2
18, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 2
34, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 2
50, 251, 252, 253, 254, 255, 256} to member 2 requesting 128
2010-11-11 09:55:41.741/232.343 Oracle Coherence GE 3.6.0.0 <D4> (thread=Distrib
utedCache, member=1): 1> Transferring 129 out of 129 partitions to a node-safe b
ackup 1 at member 2 (under 129)
2010-11-11 09:55:41.757/232.359 Oracle Coherence GE 3.6.0.0 <D5> (thread=Distrib
utedCache, member=1): Transferring 0KB of backup[1] for PartitionSet{128, 129, 1
30, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 1
46, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 1
62, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 1
78, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 1
94, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 2
10, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 2
26, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 2
42, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256} to mem
ber 2
2010-11-11 09:55:42.070/232.672 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster
, member=1): TcpRing disconnected from Member(Id=2, Timestamp=2010-11-11 09:55:4
1.216, Address=10.144.32.78:8090, MachineId=47694, Location=site:XyzT.CORP.Xyz.I
N,machine:hdchshocms2026,process:5304, Role=XyzCacheDatabaseCache) due to a peer
departure; removing the member.
2010-11-11 09:55:42.070/232.672 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster
, member=1): Member 2 left service Management with senior member 1
2010-11-11 09:55:42.070/232.672 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster
, member=1): Member 2 left service DistributedCache with senior member 1
2010-11-11 09:55:42.070/232.672 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster
, member=1): Member(Id=2, Timestamp=2010-11-11 09:55:42.07, Address=10.144.32.78
:8090, MachineId=47694, Location=site:XyzT.CORP.Xyz.IN,machine:hdchshocms2026,pr
ocess:5304, Role=XyzCacheDatabaseCache) left Cluster with senior member 1
2010-11-11 09:55:42.101/232.703 Oracle Coherence GE 3.6.0.0 <Error> (thread=Dist
ributedCache, member=1): Terminating PartitionedCache due to unhandled exception
: java.lang.UnsupportedOperationException
2010-11-11 09:55:42.101/232.703 Oracle Coherence GE 3.6.0.0 <Error> (thread=Dist
ributedCache, member=1):
java.lang.UnsupportedOperationException
at java.util.Collections$UnmodifiableMap.put(Collections.java:1285)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.partitionedService.PartitionedCache$Storage.putPrimaryResource(PartitionedCa
che.CDB:44)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.partitionedService.PartitionedCache$Storage.moveResourcesToPrimary(Partition
edCache.CDB:50)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.partitionedService.PartitionedCache$Storage.movePartition(PartitionedCache.C
DB:9)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.partitionedService.PartitionedCache.movePartition(PartitionedCache.CDB:14)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.PartitionedService.assignPrimaryPartition(PartitionedService.CDB:38)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.PartitionedService.restoreOrphans(PartitionedService.CDB:42)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.PartitionedService.onOwnershipRequest(PartitionedService.CDB:13)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.PartitionedService$OwnershipRequest.onReceived(PartitionedService.CDB:5)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.G
rid.onMessage(Grid.CDB:11)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.G
rid.onNotify(Grid.CDB:33)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.PartitionedService.onNotify(PartitionedService.CDB:3)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.g
rid.partitionedService.PartitionedCache.onNotify(PartitionedCache.CDB:3)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Thread.java:619)
2010-11-11 09:55:42.101/232.703 Oracle Coherence GE 3.6.0.0 <D5> (thread=Distrib
utedCache, member=1): Service DistributedCache left the cluster
2010-11-11 09:55:45.012/235.614 Oracle Coherence GE 3.6.0.0 <Info> (thread=main,
member=1): Restarting Service: DistributedCache
2010-11-11 09:55:45.012/235.614 Oracle Coherence GE 3.6.0.0 <D5> (thread=Distrib
utedCache, member=1): Service DistributedCache joined the cluster with senior se
rvice member 1
2010-11-11 09:55:45.012/235.614 Oracle Coherence GE 3.6.0.0 <D6> (thread=Distrib
utedCache, member=1): Service DistributedCache: sending PartitionConfig ConfigSy
nc to all
Client Application Log
======================
2010-11-11 09:59:07.380/0.251 Oracle Coherence 3.6.0.0 <Info> (thread=main, member=n/a): Loaded operational configuration from "jar:file:/E:/coherence/lib/coherence.jar!/tangosol-coherence.xml"
2010-11-11 09:59:07.380/0.251 Oracle Coherence 3.6.0.0 <Info> (thread=main, member=n/a): Loaded operational overrides from "jar:file:/E:/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
2010-11-11 09:59:07.380/0.251 Oracle Coherence 3.6.0.0 <D5> (thread=main, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
2010-11-11 09:59:07.380/0.251 Oracle Coherence 3.6.0.0 <D5> (thread=main, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
2010-11-11 09:59:07.395/0.266 Oracle Coherence 3.6.0.0 <D6> (thread=main, member=n/a): Loaded edition data from "jar:file:/E:/coherence/lib/coherence.jar!/coherence-grid.xml"
Oracle Coherence Version 3.6.0.0 Build 17229
Grid Edition: Development mode
Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved.
2010-11-11 09:59:07.896/0.767 Oracle Coherence GE 3.6.0.0 <D4> (thread=main, member=n/a): TCMP bound to /10.144.32.78:8090 using SystemSocketProvider
2010-11-11 09:59:09.164/2.035 Oracle Coherence GE 3.6.0.0 <Info> (thread=Cluster, member=n/a): This Member(Id=2, Timestamp=2010-11-11 09:59:09.164, Address=10.144.32.78:8090, MachineId=47694, Location=site:XyzT.CORP.Xyz.IN,machine:hdchshocms2026,process:2404, Role=XyzCacheDatabaseCache, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=2) joined cluster "mycluster" with senior Member(Id=1, Timestamp=2010-11-11 09:58:30.832, Address=10.144.32.78:8088, MachineId=47694, Location=site:XyzT.CORP.Xyz.IN,machine:hdchshocms2026,process:4772, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=2)
2010-11-11 09:59:09.180/2.051 Oracle Coherence GE 3.6.0.0 <D6> (thread=Cluster, member=n/a): TcpRing connecting to Member(Id=1, Timestamp=2010-11-11 09:58:30.832, Address=10.144.32.78:8088, MachineId=47694, Location=site:XyzT.CORP.Xyz.IN,machine:hdchshocms2026,process:4772, Role=CoherenceServer)
2010-11-11 09:59:09.180/2.051 Oracle Coherence GE 3.6.0.0 <D6> (thread=Cluster, member=n/a): TcpRing connected to Member(Id=1, Timestamp=2010-11-11 09:58:30.832, Address=10.144.32.78:8088, MachineId=47694, Location=site:XyzT.CORP.Xyz.IN,machine:hdchshocms2026,process:4772, Role=CoherenceServer)
2010-11-11 09:59:09.180/2.051 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster, member=n/a): Member 1 joined Service Cluster with senior member 1
2010-11-11 09:59:09.180/2.051 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster, member=n/a): Member 1 joined Service Management with senior member 1
2010-11-11 09:59:09.180/2.051 Oracle Coherence GE 3.6.0.0 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistributedCache with senior member 1
2010-11-11 09:59:09.180/2.051 Oracle Coherence GE 3.6.0.0 <Info> (thread=main, member=n/a): Started cluster Name=mycluster
Group{Address=224.0.0.1, Port=5455, TTL=4}
MasterMemberSet
ThisMember=Member(Id=2, Timestamp=2010-11-11 09:59:09.164, Address=10.144.32.78:8090, MachineId=47694, Location=site:XyzT.CORP.Xyz.IN,machine:hdchshocms2026,process:2404, Role=XyzCacheDatabaseCache)
OldestMember=Member(Id=1, Timestamp=2010-11-11 09:58:30.832, Address=10.144.32.78:8088, MachineId=47694, Location=site:XyzT.CORP.Xyz.IN,machine:hdchshocms2026,process:4772, Role=CoherenceServer)
ActualMemberSet=MemberSet(Size=2, BitSetCount=2
Member(Id=1, Timestamp=2010-11-11 09:58:30.832, Address=10.144.32.78:8088, MachineId=47694, Location=site:XyzT.CORP.Xyz.IN,machine:hdchshocms2026,process:4772, Role=CoherenceServer)
Member(Id=2, Timestamp=2010-11-11 09:59:09.164, Address=10.144.32.78:8090, MachineId=47694, Location=site:XyzT.CORP.Xyz.IN,machine:hdchshocms2026,process:2404, Role=XyzCacheDatabaseCache)
RecycleMillis=1200000
RecycleSet=MemberSet(Size=0, BitSetCount=0
TcpRing{Connections=[1]}
IpMonitor{AddressListSize=0}
2010-11-11 09:59:09.227/2.098 Oracle Coherence GE 3.6.0.0 <D5> (thread=Invocation:Management, member=2): Service Management joined the cluster with senior service member 1
2010-11-11 09:59:09.289/2.160 Oracle Coherence GE 3.6.0.0 <Info> (thread=main, member=2): Loaded cache configuration from "file:/E:/bea/user_projects/workspaces/workSpaceStudio/coh/cache-config.xml"
2010-11-11 09:59:09.461/2.332 Oracle Coherence GE 3.6.0.0 <D5> (thread=DistributedCache, member=2): Service DistributedCache joined the cluster with senior service member 1
DB Hit
DBCacheStore(String) called...
2010-11-11 09:59:09.524/2.395 Oracle Coherence GE 3.6.0.0 <D4> (thread=DistributedCache, member=2): Asking member 1 for 128 primary partitions
load() called...
Emp Id:1, Emp Name:Employee, Emp Addr:Address
Cache Hit
Emp Id:1, Emp Name:Employee, Emp Addr:Address
Client Java Program
===================
package com.cache;
import com.tangosol.net.CacheFactory;
import com.tangosol.net.NamedCache;
public class DatabaseCache {
     public DatabaseCache() { }
     private NamedCache cache;
     public void createCache() {
          CacheFactory.ensureCluster();
          cache = CacheFactory.getCache("VirtualCache");
     public void retrieveEntry() {
          System.out.println("DB Hit");
          System.out.println(cache.get("1"));
          System.out.println("Cache Hit");
          System.out.println(cache.get("1"));
     public static void main(String[] args) {
          DatabaseCache databaseCache = new DatabaseCache();
          databaseCache.createCache();
          databaseCache.retrieveEntry();
DBCacheStore Java Program
=========================
Note : I am querying an ORACLE VIEW
package com.cache;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.util.Collection;
import java.util.HashMap;
import java.util.Iterator;
import java.util.LinkedList;
import java.util.List;
import java.util.Map;
import com.tangosol.net.cache.CacheStore;
import com.tangosol.util.Base;
public class DBCacheStore extends Base implements CacheStore {
     private String tableName = null;
     public DBCacheStore() {
          System.out.println("DBCacheStore() called...");
     public DBCacheStore(String tableName) {
          System.out.println("DBCacheStore(String) called...");
          this.tableName = tableName;
     private Connection getConnection() throws Exception {
          Class.forName("oracle.jdbc.driver.OracleDriver");
          String url = "jdbc:oracle:thin:@localhost:1521:xe";
          Connection connection = DriverManager.getConnection(url,"system","manager");
          return connection;
     public void erase(Object arg0) {
          System.out.println("erase() called...");
     public void eraseAll(Collection arg0) {
          System.out.println("eraseAll() called...");
     public void store(Object key, Object value) {
          System.out.println("store() called...");
     public void storeAll(Map arg0) {
          System.out.println("storeAll() called...");
     public Object load(Object obj) {
          System.out.println("load() called...");
          Employee employee = null;
          Connection con = null;
          PreparedStatement pStmt = null;
          ResultSet rSet = null;
          try {
               con = getConnection();
               pStmt = con.prepareStatement("select emp_id, emp_name, address from " + tableName + " where emp_id = ?");
               pStmt.setInt(1, Integer.parseInt((String)obj));
               rSet = pStmt.executeQuery();
               if(rSet.next()) {
                    employee = new Employee();
                    employee.setEmpId(rSet.getInt("emp_id"));
                    employee.setEmpName(rSet.getString("emp_name"));
                    employee.setEmpAddr(rSet.getString("address"));
          } catch(Exception e) {
               e.printStackTrace();
          } finally {
               try {
                    if(rSet != null)
                         rSet.close();
                    if(pStmt != null)
                         pStmt.close();
                    if(con != null)
                         con.close();
               } catch(Exception e) {
                    e.printStackTrace();
          return employee;
     public Map loadAll(Collection arg0) {
          System.out.println("loadAll() called...");
          Connection con = null;
          PreparedStatement pStmt = null;
          ResultSet rSet = null;
          Employee employee = null;
          Map empMap = new HashMap();
          try {
               con = getConnection();
               pStmt = con.prepareStatement("select emp_id, emp_name, address from " + tableName);
               rSet = pStmt.executeQuery();
               while(rSet.next()) {
                    employee = new Employee();
                    employee.setEmpId(rSet.getInt("emp_id"));
                    employee.setEmpName(rSet.getString("emp_name"));
                    employee.setEmpAddr(rSet.getString("address"));
                    empMap.put(employee.getEmpId(), employee);
          } catch(Exception e) {
               e.printStackTrace();
          } finally {
               try {
                    if(rSet != null)
                         rSet.close();
                    if(pStmt != null)
                         pStmt.close();
                    if(con != null)
                         con.close();
               } catch(Exception e) {
                    e.printStackTrace();
          return empMap;
     public Iterator keys() {
          Connection con = null;
          PreparedStatement pStmt = null;
          ResultSet rSet = null;
          List returnList = null;
          try {
               con = getConnection();
               pStmt = con.prepareStatement("select emp_id from emp_addr_view");
               rSet = pStmt.executeQuery();
               returnList = new LinkedList();
               while(rSet.next()) {
                    returnList.add(rSet.getString("empId"));
          } catch(Exception e) {
               e.printStackTrace();
          } finally {
               try {
                    if(rSet != null)
                         rSet.close();
                    if(pStmt != null)
                         pStmt.close();
                    if(con != null)
                         con.close();
               } catch(Exception e) {
                    e.printStackTrace();
          return returnList.iterator();
cache-server.cmd added lines
============================
set CLASSPATH=%CLASSPATH%;E:\bea\user_projects\workspaces\workSpaceStudio\coh\bin;E:\bea\wlserver_10.0\server\lib\ojdbc14.jar;
Note : E:\bea\user_projects\workspaces\workSpaceStudio\coh\bin in the above line contains compiled class files starting from "com" folder.
"%java_exec%" -server -showversion "%java_opts%" -cp E:\bea\user_projects\workspaces\workSpaceStudio\coh\bin -Dtangosol.coherence.log.level=9 -Dtangosol.coherence.cluster=mycluster -Dtangosol.coherence.clusteraddress=224.0.0.1 -Dtangosol.coherence.clusterport=5455 -Dtangosol.coherence.cacheconfig=E:\bea\user_projects\workspaces\workSpaceStudio\coh\cache-config.xml -cp "%coherence_home%\lib\coherence.jar" com.tangosol.net.DefaultCacheServer %1
JVM arguments for running Client Program : DatabaseCache.java
=======================================
-Dtangosol.coherence.cacheconfig=E:\bea\user_projects\workspaces\workSpaceStudio\coh\cache-config.xml
-Dtangosol.coherence.cluster=mycluster
-Dtangosol.coherence.clusteraddress=224.0.0.1
-Dtangosol.coherence.clusterport=5455
==================================================================================================
Please do let me know if you require further information.
Thanks
Karthik

ProjectCenter Webpart on another Site Collection "This Web Part was unable to load"

Hi,
Project Server 2013 on an url like http://domain.tld/pwa
Trying to use the Project Center Web Part from another site collection, let's say http://domain.tld/sites/siteA
I get the "This Web Part was unable to load" error and in the ULS I get Object Reference not set to an instance of an object classic error
What am i doing wrong?
Thanks!

Thank you for the thoughts Michael but none of those worked for me.
What I have done so far is I have added the PWA features to the site which is what has made it work when logged in under the farm account.
So I have 3 account I am testing with
1.) regular account with read only permissions to the Publishing page
2.) Admin account that is in a group that is a site administrator to ALL sites
3.) Farm account
Currently it works for the Farm account and the Admin account but not the regular account. I have added the regular account to the same group as the Admin account and will test when the change updates to see if I can access the information. This
will at least let me know that it is a Permissions issue which is what I think it is I just cant figure out which permission it would need to be.

Unable to load catalog in CRS application. Indexing is failed

Unable to load catalog in CRS application, Indexation failed: Below is the error msg
**** Error /atg/dynamo/service/jdbc/JTDataSource Unable to connect to data source because of SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_RMERR start() failed on resource 'ATGProductionDS_base_domain': XAER_RMERR : A resource manager error has occured in the transaction branch
**** Error Mon Apr 21 10:35:29 IST 2014 1398056729516 /atg/dynamo/service/jdbc/JTDataSource weblogic.transaction.internal.ResourceAccessException: Transaction has timed out when making request to XAResource 'ATGProductionDS_base_domain'.
**** Error /atg/dynamo/service/jdbc/JTDataSource at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:670)
**** Error /atg/dynamo/service/jdbc/JTDataSource at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1230)
**** Error /atg/dynamo/service/jdbc/JTDataSource at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1164)
Caused by: weblogic.transaction.internal.TimedOutException: Transaction has timed out when making request to XAResource 'ATGProductionDS_base_domain'.
**** Error /atg/dynamo/service/jdbc/JTDataSource at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:673)
**** Error /atg/dynamo/service/jdbc/JTDataSource
In Dyn Admin "atg/commerce/search/ProductCatalogOutputConfig" is failed
"atg/commerce/endeca/index/CategoryToDimensionOutputConfig" is failed

This issue is related to weblogic transaction timeout.
Can you increase the weblogic domain transaction timeout?
By default it is 30 sec, increase to 600
Refer Domain --&gt; Configuration --&gt; JTA to increase timeout.
Peace
Shaik

OpenDirectory: Unable To Load Replica List, after Time Machine Restore

I followed the following instructions provided on another thread (Open Directory: "Unable to load replica list"):
Many Open Directory problems can be resolved by taking the following steps.
1. The OD master must have a manually-assigned IP address on the local network, not a dynamic address.
2. The primary DNS server used by the master must be 127.0.0.1 (that is, itself) unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
3. Verify that the master's hostname matches its domain name by running the shell command
sudo changeip -checkhostname
4. Follow these instructions to rebuild the Kerberos configuration on the master.
5. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases.
6. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
7. Reboot the master and the clients.
8. Don't log in to the server with a network user's account.
9. Export all OD users, delete them, turn off OD, turn it back on, and import. Ensure that the UID's are in the 1001+ range.
And got the following results:
Check.
Check.
Resulted in the following console output: The names match. There is nothing to change.
The touch command resulted in "No such file or directory." I circumvented this by manually creating the migration directory, then running the command again. The killall command failed saying "No matching processes were found." Opening the server app after that shows no change.
My trusted certificate was apparently not restored from the backup, as it was no longer listed. I switched to the self-signed one until a CSR can be made.
I'm not clear on what this actually means. There is no unbind or rebind functionality in the server app. Not to mention that my users or groups are no longer listed.
Nothing changed after rebooting the server.
Have always logged into server using the local server admin account.
Where is this done? I don't see any place to do this in the Server App.
At this point I'm suspecting that there are some serious Time Machine recovery bugs with server, as I have tried with multiple different restore points all ending in the exact same result.
Any recommendations on where to go from here? I would love to do a fresh install, but need to archive the data from the server first. Unfortunately, I don't see how I can export each users' data without being able to log in as them.

There seem to be some issues with PostgreSQL not running. Marketcircle Daylite and Billings Pro also won't start, and are showing errors to that effect.

Unable to load console information!!!!

hi,
i installed the SunMC agent on server2 and i have already installed the SunMC server on server1 and i assigned the server1 to be SunMC server for the agent of the server2. but when i run "Discover Objects" from my domain , it catch the server2 but i cant get the information.."unable to load console information"
so what might be the problem ???
Thanks.

Looks like the see password of the server and agent are not matching. do a es-setup -F on agent system and give the same seed as given on the server machine.
HTH
Sanjay

Unable to load style(SWF is not a loadable module)

While devoloping an App voor iOS we decided to use several StyleSheets.
We are implementing the loading of Stylesheets as:
event_dispatcher:IEventDispatcher = this.styleManager.loadStyleDeclarations2("assests/styles/default.swf");
event_dispatcher.addEventListener(StyleEvent.COMPLETE, OnStyleLoaded);
event_dispatcher.addEventListener(StyleEvent.ERROR, OnStyleError);
running the app on the desktop simulators work fine.
packaging the app with package method fast, and running the app on an iphone4 works fine.
packaging the app with package method standaard, and running the app on an iphone4 gives an error:
Unable to load style(SWF is not a loadable module): assets/styles/default.swf.
Is there something im missing? Why does it work when packaging as Fast, and not as Standard?

Hi,
        The source file is .swf ie(.css is converted to .swf).
         Main swf is running from local.
         Style module is from server.
I set security domain. But it throws security sanbox violation.
What should i do. Even some time if a use the local url means it thorws the same error Unable to load style(SWF is not a loadable module).
thanks,
Jayagopal.

Security error accessing url (Unable to load WSDL)

Hi folks.
I have a Flex project that use a WCF webservice. In my localhost everything is allright, but I want to upload my flex project to a web host (http://www.dorj.ir) and upload my WCF webservice to a server that has a valid IP...
After going to http://www.dorj.ir, you can see this error
Security error accessing url
Unable to load WSDL. If currently online, please verify the URI and/or format of the WSDL (http://ip/service.svc?wsdl)
I put the crossdomain.xml file in the root of my server:
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="http://www.dorj.ir" />
<allow-http-request-headers-from domain="http://www.dorj.ir" headers="SOAPAction"/>
</cross-domain-policy>
But I have the same error, yet...!
what should I do?!

Have you seen this blog
"Crossdomain.xml" in ABAP Web AS Server cache

Unable to load OS bound to a domain after power-outage

Similar Messages

Maybe you are looking for