Unable to load plug-in assembly for crm 2013 on site

hi, 
i am trying to register a plugin that i wrote to our CRM 2013 on site, i have copied my dll and the 2 ms dll's Microsoft.Crm.Sdk.Proxy.dll and Microsoft.Xrm.Sdk.dll to C:\Program Files\Microsoft Dynamics CRM\Server\bin\assembly on the CRM
server machine.  this assembly directory has all of the permissions for my user and the same user has the Deployment Administrator role in CRM.  
however, i am still getting an error "Unable to load plug-in assembly." when trying to register the assembly plugin in without isolation mode, on disc.  when i register to database it works fine.  but i would like to stick to the disc
while debugging.
what else could be causing this problem?
thanks,
Inna

That is a strange one, I've never had good luck with anything other than database deployment.  You can debug the plugin DLL using database deployment.
That being said, there is a very good tool called DevDeployment that you can use for your VS build process to publish the updated DLL after it's built.
http://www.patrickverbeeten.com/CRM-Applications/Deployment-Helper
Not sure if this answers the question, but if you don't get an answer you can use this tool anyway.

Similar Messages

  • Error message "Unable to load plug-in type"

    Hi I used plugin registration tool and updated an existing plugin by a new dll.. and then afer that I started recieveing error messages on the CRM on our Dev environment. Error message "Unable to load plug-in type" it was registered for contact entity for
    post create and update but we are getting this error on any entity updates and creates..
    Any help on how to resolve this issue with be deeply appreciated.
    thanks in advance,
    Future MVP

    While this thread is 3 years old, yet I just encountered the same problem about half an hour ago, and I believe this is a bug within CRM Solution Import routine.
    What I had was a plugin which was imported previously. Then, I added new plugin steps and got 'Unable to load plugin type' when registering the new plugin steps I added.
    The solution I have is:
    a. Import just the plugin assembly without the new plugin steps, and publish.
    b. The plugin assembly is now updated with the new plugin class definition. Then add the new plugin steps and import the solution again.
    c. The solution should now be imported successfully.
    What I believe the bug is CRM Solution Import routine checks for the plugin class/type definition in the existing plugin assembly in the server rather than the new plugin assembly in the solution being imported.
    By the way, all solutions are unmanaged. Perhaps, the same bug will not happen in Managed solution.
    HTH anyone else experiencing the same issue.
    Henri

  • Problem with FLASH 9 - unable to load plug-in

    At a website request to update to Flash 9 to allow my ibook to visualize soime content, I downloaded the installer from ADOBE and tried to update. Now every time a website has a Flash component I get the following message:
    UNABLE TO LOAD PLUG IN
    "The page “XYZ" attempted to load an Internet plug-in named “Shockwave Flash”, but the plug-in failed to load successfully."
    I downloaded the Flash uninstaller, run it, installed again version 9 but I still get the same error message.
    Then I thought some Safari files could have been damaged, but when I download the installer for Safari 1.3.2 and tried to reinstall it, I get a message saying that "this software can't be installed on this system".
    Questions: any suggestions? is Flash 9 compatible with MAC OS 10.3.9? Is it a Safari problem (my current version: 1.3.2) Thanks a lot.
    Calvin183

    You know what you're writing about!
    My wife would have a very different opinion.
    You're welcome Calvin. Glad I could help.
    Thanks for the and Aloha from Big Island.
    iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD   Mac OS X (10.4.8)   LaCie 160gb d2 HD Canon i960 printer, Airport Express (2 units)

  • 301 unable to load plug in

    i loaded the newest firefox last night, 5.0.
    woke up today, went to a site i always visis, perezhilton.com, and now i am getting a flowplayer.vast.swf error
    301 unable to load plug in
    the site itself also looks odd, large letters, links not working, etc.
    how do i rectify this? is it firefox or the site? i have found this error in volumes on the internet when searching for how to fix it.
    please help me. this is annoying and i cannot fix it.
    thank you

    Just for the archive:
    I had always removed the ".qualifier" from the version string of my plug-ins, since I did not know what it is good for. Now I know what it is good for: it causes the current time stamp to be added to the version information of a plug-in when it is exported.
    Back to my problem:
    Even if I change the code of my plug-in, the application seems to use somehow the old plug-in in its cache if I have not changed the version string.
    There are two ways to solve that.
    1. Start the application with the option -clean.
    2. Add ".qualifier" to the version string of each plug-in. In this case the current time stamp is added to the plug-ins version and the framework realizes that the plug-in has changed even though I have forgotten to increase the version number.
    Now everything works fine and I do not have to start my application with -clean the first time after releasing a new version.

  • Safari unable to load plug-in

    Hi, this problem is baffling me. Every web site I go to I can't load Quicktime video or audio files. Every time it tries to load the file it gives me a dialog saying "Unable to load plug-in. The page "blah-blah-blah" attempted to load an Internet plug-in named "Quicktime Plug-In 7.3", but the plug-in failed to load successfully." And it shows me a little Lego block with question marks on it.
    I searched the forums here trying to find a solution and I tried every one I found, none worked. I've reinstalled Quicktime, but that hasn't worked either.
    Can anyone think of a solution? Am I missing something? Thanks.

    Your problem relates to Flash video.
    These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
    It is known to work in the great majority of cases with Safari 3.0.4, QT 7.3 and OS 10.4.11. (If you are running Leopard, ensure that all plug-ins have been updated for OS 10.5)
    Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
    RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
    Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
    Perian from http://perian.org/
    Adobe FlashPlayer should first be uninstalled using the appropriate uninstaller available here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2 and then the latest version obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash and installed.
    (You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. This: http://www.macworld.co.uk/news/index.cfm?email&NewsID=19845 may also interest you.)
    In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
    See also the very informative post from QuickTimeKirk dated Dec 3, 2007 in this thread: http://discussions.apple.com/thread.jspa?threadID=1268489&tstart=0
    In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
    Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them).
    Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz.
    Important: Now repair permissions and restart.
    The world should now be your oyster!
    You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

  • Adobe Acrobat 8 unable to load plug-in in Window Vista

    I have developed a plug in for Adobe Acrobat, but Abode Acrobat unable to load the plug in. I try to troubleshoot the problem by putting a messagebox in the PIHandshake function.
    Noticed that, the function is not being called by Adobe Acrobat when Acrobat app is launched.
    When Adobe Acrobat is launching, I able to see the my plug in's name is display on the splash screen.
    Below is the environment info:
    a. Adobe Acrobat 8 Standard Version 8.1.3
    b. Window Vista Business
    I try to put a messagebox in function ACCB1 ASBool ACCB2 PIHandshake(Uns32 handshakeVersion, void *handshakeData), the Adobe Acrobat application didn't call this function.
    ACCB1 ASBool ACCB2 PIHandshake(Uns32 handshakeVersion, void *handshakeData)
    AVAlertNote(" PIHandshake");
    I have reinstalled Adobe Acrobat software, but the problem still happend. Is there anyone can guide me what is wrong, what possible things that may cause the application unable to load the plug in
    and what steps should i need to do next?

    Your guidance did help me a lot in troubleshooting the problem. Thanks all of you.
    Findings:
    I use a sample plug-in, the acrobat is able to load it out. Then, I use depend.exe to compare the sample plug-in with my plug-in, I noticed that my plug-in does not have PlugInMain entry point function.
    The reason is I compile my plug-in as release version and did not put a command line /EXPORT:PlugInMain under [AppProject]->Properties->Linker->Command line.
    The second reason is my plugin - the one with the problem has been cached in VirtualStore directory, and i didn't realize it. Therefore, everytime i run acrobat app, it always load the old api (no PlugInMain) from the VirturalStore directory. After delete the old file. Then, Acrobat is able to load my new api from c:\Program Files\Adobe\Acrobat 8.0\Acrobat\plug_ins.
    VirtualStore Directory:
    C:\Users\[User Name]\AppData\Local\VirtualStore\Program Files\Adobe\Acrobat 8.0\Acrobat\plug_ins

  • Dynamic Hyperlink in SSRS 2008 for CRM 2013 online

    Hi All,
    I have a report which displays contact name and  contactid from contact table 
    I need a link to the contact name which open the CRM record
    Is this possible ?
    Any suggestion most appreciated
    Thanks
    Pradnya07

    Hi
    i been using this url for help
    http://h30507.www3.hp.com/t5/Applications-Services-Blog/Microsoft-Dynamics-CRM-2013-SSRS-drill-down-reports-Part-II/ba-p/149943
    but it didnt worked i get the below error
    Any help much appreciated
    Thanks
    Pradnya07

  • Office Web Apps Load Balancing Configuration Issue for SharePoint 2013

    I have load balanced servers dedicated for Office Web Apps with name “md1xxxwfe1” and “md1xxxwfe2” 
    , both this servers are load balanced by CISCO Load balancer. And I have mapped Load Balancer Virutal IP with host name officeapps.jda.corp.local in the DNS records.
     Things are working fine if I add new farm by using New-OfficeWebAppsFarm
     with server name as internalurl in PowerShell console
     as like “  -internalurl http://
    md1xxxwfe1  but when I use –internalurl officeapps.jda.corp.local it is not working at all. I’m not getting what to do at this point.
    I have gone through following blogs but no luck.
    http://blogs.technet.com/b/meamcs/archive/2013/03/27/office-web-apps-2013-multi-servers-nlb-installation-and-deployment-for-sharepoint-2013-step-by-step-guide.aspx
    http://blogs.technet.com/b/office_resource_kit/archive/2012/09/11/introducing-office-web-apps-server.aspx
    http://davidlimsharepoint.blogspot.in/2013/02/installing-and-configuring-office-web.html 
    http://sps2013.blogspot.in/2013/09/office-web-apps-with-sharepoint-2013.html
    The output of the wfe1 server is attached with this. When I open http:// /hosting/discovery in wfe1 I’m getting following result (attached
    screenshot) but it should show hostname rather than server name.
    Please help me
    Thanks, Ram Ch

    Hi  Ram ,
    For  troubleshooting your issue, please take steps as below:
    Just about any load balancing solution will work, including a server that runs the Web Server (IIS) role running Application Request Routing (ARR):Install
    Application Request Routing
    Install the certificate on the load balancer as described under Securing Office Web Apps Server communications by using
    HTTPS.
    Make sure you have configured the cluster correctly for full internet name:
    Reference:
    http://technet.microsoft.com/en-us/library/jj219435.aspx#loadbalancer
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Eric Tao
    TechNet Community Support

  • In Firefox, I'm unable to load any website using cloudflare but the same sites load fine in Safari.

    Whenever I try to load any website using cloudflare in Firefox, I get this error message:
    "Error 1000 DNS points to prohibited IP. You've requested a page on a website that is on the CloudFlare network. Unfortunately, it is resolving to an IP address that is creating a conflict within CloudFlare's system."
    But the same sites load up fine with no problems in Safari. I've tried everything suggested in related support pages - cleared cache (my browser's set to do that on close anyway), cleared cookies, set to no proxy, disabled add-ons, etc. Nothing worked!
    EDIT: Just noticed that 1 cloudflare page was able to load after disabling the add-on called "Modify Headers" v7.1.1 However, I don't know if this will work for all cloud flare sites. Unfortunately, I did not keep a list of sites that didn't load, so I can't test by loading them now.

    This is the dump from my ModifyHeaders settings:
    [{"action":"Add","name":"X-Forwarded-For","value":"76.74.254.121","comment":"","enabled":true},{"action":"Add","name":"X-Forwarded-For","value":"97.24.26.128","comment":"","enabled":true},{"action":"Add","name":"X-Forwarded-For","value":"24.143.196.56","comment":"","enabled":true},{"action":"Add","name":"X-Forwarded-For","value":"69.22.138.131","comment":"","enabled":true},{"action":"Add","name":"X-Forwarded-For","value":"200.111.172.46","comment":"","enabled":true},{"action":"Add","name":"X-Forwarded-For","value":"209.112.44.10","comment":"Canada","enabled":true},{"action":"Add","name":"X-Forwarded-For","value":"209.81.89.10","comment":"","enabled":true},{"action":"Modify","name":"X-Requested-With","value":"209.81.89.10","comment":"","enabled":true},{"action":"Add","name":"X-Do-Not-Track","value":"209.81.89.10","comment":"","enabled":true},{"action":"Add","name":"X-Forwarded-For","value":"83.98.74.165","comment":"UK","enabled":true},{"action":"Add","name":"X-Requested-With","value":"83.98.74.165","comment":"UK","enabled":true}]

  • Does JQuery DataTable work for CRM 2013 online?

    Hi,
    In CRM 2013 online, I am embedding a html WebResource to display a JQuery DataTable object in Account form.  The JQuery DataTable queries an external database thru its restful API.  Somehow, the DataTable does not display data in
    Account form.  My first question is: does JQuery DataTable work with CRM online?

    Hi, Polat-
    Thanks for your relay.  I am using JQuery DataTable ajax object to fill the html table.  It does not get data from service API.  It always goes to the error block.  What went wrong?  Thanks.
    var oData = null;
                   // Perform a synchronous oData retrieve
                   $(document).ready(function() {
                           $('#example').dataTable( {
                               "ajax": {
                                      "type": "POST",
                                      "url": oDataSelect,
                                      "data": oData,
                                      "beforeSend": function (XMLHttpRequest) {
                                          XMLHttpRequest.setRequestHeader("Accept",
    "application/json");
                                          // generate base 64 string from username
    + password                             
                                          XMLHttpRequest.setRequestHeader("Authorization",
    "Basic " + Base64.encode("xxxxxxxxxxx"));                                      
                                      "success": function (oData, textStatus, XmlHttpRequest)
                                            alert('OData Select Succeeded:
    ' + oDataSelect);                                       
                                      "error": function (XmlHttpRequest, textStatus, errorThrown)
                                          alert('OData Select Failed: ' +
    oDataSelect);
                               "columns": [
                                      { "title": "Name" },
                                      { "title": "Position" },
                                      { "title": "Office" },
                                      { "title": "Extn." },
                                      { "title": "Start date" },
                                      { "title": "Salary" }

  • Adobe Acrobat 8.1.0 unable to load plug-in in Window Vista 64 bit

    Hi,
    Abode Acrobat is not loading the plug-ins which are build using 64bit compiler. Even I tried this with sample plugin (eg. BasicPlugin) but that also I am n't able to load it.
    So does Adobe Acrobat 3d v8.1.0 supports plug-ins which are build using 64bit compiler ?.
    Below is the environment info:
    a. Adobe Acrobat 3D v8.1.0
    b. Window Vista 64Bit
    Please let me know your comments
    Regards,
    Arvind

    Hi,
    Actually we have an application, which we need to build in 64bit. And in that application,we embed acrobat. And looks like Adobe Acrobat 3D 8.1 have some support for 64bit and that's why it get embedded.But problem is coming on using adobe plug-ins for 64build.
    So is there any way to use plug-ins for 64 build application ?
    Regards,
    Arvind

  • Adobe Acrobat 8.1.1 unable to load plug-in in Window Vista 64 bit

    Hi,
    Abode Acrobat is not loading the plug-ins which are build using 64bit compiler. Even I tried this with sample plugin (eg. BasicPlugin) but that also I am n't able to load it.
    So does Adobe Acrobat 3d v8.1.0 supports plug-ins which are build using 64bit compiler ?.
    Below is the environment info:
    a. Adobe Acrobat 3D v8.1.0
    b. Window Vista 64Bit
    Please let me know your comments
    Regards,
    Arvind

    Hi,
    Actually we have an application, which we need to build in 64bit. And in that application,we embed acrobat. And looks like Adobe Acrobat 3D 8.1 have some support for 64bit and that's why it get embedded.But problem is coming on using adobe plug-ins for 64build.
    So is there any way to use plug-ins for 64 build application ?
    Regards,
    Arvind

  • Unable to load Full Feature Software for Officejet 7410

    I have downloaded the current Drivers and Full Feature Software for my 7410.  The installation states that it completed successfully.  I do not have any new software loaded on my system.  I do not have the software access to any of the features that are on the 7410.  I can print, but the automatic two sided printing does not work.  I donot have the Photosmart application avalibale also.  My OS is currently Win 7 Professional.  Is there something I am missing to get the Full Functionality of my7410 back in service?   In the near future, I will have Wondows  10 installed.  Will there be an update available with new drivers and Working Software?

    Hi Teak37,
    I understand that you are having an issue getting the full feature software for your printer installed from the CD. I will try my best to help you get the printer installed. Here is a download for the HP Photosmart and Officejet Full Feature Software and Drivers. Download this file and save it to your desktop. Then follow the instructions in this document for Installing the Printer Software in Windows 7 for a Wired (Ethernet) Network Connection to install the software and drivers.
    I hope this information helps, let me know if you need further assistance.
    Thank you,
    I worked on behalf of HP.

  • Itunes was unable to load data class information  for sync srervices

    how fix this error?

    Not sure if this is the fix for Windows, but it's definitely the fix on a Mac:
    • Control-click (on Windows it's Right-click) the iTunes application icon.
    • Select "Get Info" (or the Windows equivalent of that).
    • Then UNCHECK "Run in 32-bit mode," so that iTunes runs in 64-bit mode.
    Fixed.
    Of course, this only applies to newer (64-bit) computers, but that simple change did the trick. If you're on a 32-bit machine and iTunes doesn't launch after doing the above, simply do the same, and RECHECK that box.
    (If this fix works, perhaps a Windows user can clarify these steps for iTunes for Windows.)

  • I keep receiving Unable to load page and have gone through everything this site says to do, other ideas

    This just started mid-day, working fine one moment, and know i can't open pages. IE seems to be working fine.
    == URL of affected sites ==
    http://
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SV1; GTB0.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)

    "Save Link as" in Firefox is the same as "Save Target" IE and will save the file to a folder on your computer.
    See also: Firefox (or Tools) > Options > General

Maybe you are looking for