Unable to load Program Position Hierarchy in Investment Management

When trying to load 0PROG_POS_IVPR_HIER we get the error message that no hierarchy exists in the source system. The program position hierarchy is in IMPR in ECC. It's there, but somehow the data source isn't seeing it (or is pointing somewhere else?)
Everything is active/replicated on the BW side and in RSA6.
Any ideas?

Hi Adam,
Have you performed below tasks after replicating into BW:
1. In your Infopackage used to load hierarchies, under 'Hierarchy Selection' tab click on 'Available Hierarchies from OLTP' push button.
2. Select the RADIO buttion relevant to the hierarchy which you want to refresh from ECC also select the CHECK BOX under 'Relevant to BW' column.
3. Select required UPDATE METHOD and then under 'Schedule' tab run the START to see if data flows into BW.
Let me know the outcome in case above is not done yet.
Regards,
Ravi Poluru
Assigning Points = Saying Thanks

Similar Messages

ERROR: 'Sky Go unable to load program information as there is no Internet connection'

I was using Sky Go via my iPad and a T-Mobile hot spot generator (Hauwei) to watch programs whilst in my caravan in Devon. Suddenly it stopped working and I now whenever I try and use Sky Go I get the message 'Sky Go unable to load program information as there is no Internet connection'. Obviously I am connected. I have tried reinstalling Sky Go and have completely rebooted the iPad but to no effect. Why has it suddenly stopped working???
Having returned home I have tried to connect again when the ipad is connected via my BTHomeHub2 but I still get the same message, I have also tried to use BBC iPlayer and I am getting the same error message. What has happened????

nikhildhoot wrote:
When the router has an internet connection, the phones automatically connect to the router flawlessly. When there is no internet connection, we get a notification saying "Wi-Fi Connection Limited"
The limited WiFi Connection issue when there is a good internet connection, is a known issue in the OS releases in the past six months, and has been corrected as far as I can tell on the most recent 10.2.1.3xxx or higher OS.
But, I would note that when your router has no internet connection, you should expect to get that notification... no internet connection > limited wifi connection.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Unable to Load program from Misc\Baseline_Package\Poland\NOTES\zxzxvvfu08

Hi,
In SAP best practices 201_BB_ConfigGuide_EN_PL: Sales Order Processing with Customer Down Payment --
there is astep 3.1.7Changing the Accounting Entries: EXIT_SAPLV60B_008 which involve SAP Ehancement SDVFX008. opened in CMOD and asked to Load program from folder: ..Misc\Baseline_Package\Poland\NOTES\zxvvfu08.txt.
I am unable to access to do so.. kindly assist.
Regards,
Lakshmi Narayana

Hi
In table MODSAP, the function name EXIT_SAPLV60B_008 is for the enhancement SDVFX008. So, with the tcode CMOD create a project, set this enhancement. Activate them. In the function module you have the include zxzxvvfu08. Do double clic over it. The system will reply you that this object doesn't exist (usually, the enhancement use include ZX*, ie, reports in the range name for customer developments) and then copy the code in this txt file.
In the other hand, see Note 301077 - User exits for the interface to accounting. It speaks about this kind of enhancements.
I hope this helps you
Regards
Eduardo

BI Reporting across multiple approval years - IM program position hierarchy

Hi,
We have an issue with our BI report whereby if a user wants to report year to date actuals for financial year 2010,
they need to run the IM report twice.
This is because the IM report is run with a program hierarchy(based on 0PROG_POS), and the infoobject is compounded to approval year.
So, closed projects (with spend in 2010) exist in program hierarchy with approval year 2010
AND open projects (with spend in 2010) exist in program hierarchy with approval year 2011
So to get true 2010 expenditure, the report need to be run once for approval year 2010 and once for approval year 2011.
The users want to be able to run the report once only.
Please help.
I have looked in R3 SBIW convert program name, but that seems to combine 2 programs into one, but they need the same approval year.

it sounds like you've approached the setup correctly, you may want to ensure all the values in the the records you are retracting are valid in ECC - ie make sure you master data is in sync, for example have you got new planning versions in BW/BPS and try to retract data back int a system that does not recognise the new values for 0version as they are not in the master data of the ECC system

I receive the error: Unable to load block component C:\Program Files\Hyperception\VABINF\KeyRcv.dll

I have two Major issues with our Infinity Project computers,
We have one entire lab that is getting this error... "Unable to load
block component C:\Program Files\Hyperception\VABINF\KeyRcv.dll.
Please verify that the component exists and any dependencies it may
have are satisfied." It is also producing this error with
NumEntry.dll. Both files exist. I am not sure what
dependencies these files may have. Ideas?
We have several systems that are giving the following error on one of
our labs... "You have exceeded the number of block functions allowed by
VAB for Infinity; contact Hyperception regarding upgrades." From
what The professor here at UTA told me when I first took on this
project, this was a problem that we had on the previous boards and that
someone at Hyperception was able to help us resolve this problem.
Can you help out with these issues? The first one I need an answer today if possible.
Thanks,

We have seen this type of problem on some computers (we do not know why as of yet).The problem with missing blocks is very likely being caused by file permissions, and can be seen when non-administrators are using VAB software. To resolve this: 1. login as ADMINISTRATOR 2. run the command line script from a DOS prompt as shown below: cacls "C:\Program FIles\Hyperception\VABINF" /T /E /G Everyone:F It will scroll through the name of every file in the provided directory, and all subdirectories. This should reset every file, and allow the USER to access all files in VAB software. This should correct the problem. Regards,Steve

Authorization for Investment Management program positions by Plant Code

Hello!
I am looking for a way to restrict data on Investment Management reports (program positions) by plant code. I found the following auth objects, but none for plant code:
Company code (A_IMPR_BUK)
Business area (A_IMPR_GSB)
Controlling area (A_IMPR_KOK)
Profit center (A_IMPR_PRC)
Persons responsible (A_IMPR_VER)
Any advise?
Cheers,
Alex

Refer BPGE, BPJA.
Regards

Unable to create position hierarchy in organization model

I was unable to create position hierarchy in organizational hierarchy. I want to maintain position hierarchy within an organization. But SAP CRM is not allowing that. I was able to create organizational hierarchy. Please let me know, how can I maintain the position hierarchy within the same organization?
--hari

Hi hari,
it is only possible to have a hierarchy with two levels on position level. Therefore you create two positions below your organization (tx ppoma_crm). At one of these positions you set the flag "Head of own organizational unit" at the Basic data tab of the position (To see this, you need to display the Details of the positions at the bottom of the screen). Now you can assign a business partner (or more) to this position which is (are) the Head of this unit.
If you need a more complex hierarchy you have to use organizations to show this.
Hope it helps!
Kind regards
Christian

Not possible to delete link investment program position from Appropriation request

Dear specialists,
We have a problem with deleting a linked investment program position in an appropriation request (IMA3, IMA11 or IMA12).
We could edit some of the appr.req.'s but a few give an error.
Steps done:
We deleted the status BUDG from the linked projects (budgets deleted and OPSX for deletion of status).
The we run the IM27_repeat.
For the most of the appr.req.'s the linke was removed (table IMZO).
For a few of our req.'s the link is not removed so that we can't link the new progr.pos. to this appr.req.
Regards,
Marcel

Hello Marcel,
Please check Customizing of the investment program type under 'assignable operative objects' in t-code OIT3 or in following path
SPRO --> Investment Management --> Investment Programs --> Master Data --> Define Program Types
Also check in following SAP note
130216 - Program position not allowed for measure
Regards
Tushar

Had Acrobat 7.0 Pro on prior laptop. Got new laptop and unable to load my purchased copy on new machine. Getting message 0cx00000fd. Why can't I transfer program to new computer?

Had Acrobat 7.0 Pro on prior laptop. Got new laptop and unable to load my purchased copy on new machine. Getting message 0cx00000fd. Why can't I transfer program to new computer?

The Error is windows specific error. However try Downloading it from Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Hi! I lost all the programs on my mac book's hard-drive. I reinstalled Mac os x snow Leopard Disc, the computer, now works well.But, I am unable to load my address book and transfer some pictures for a CD (I used to have) back to the Mac Book. Can you hel

I am trying to reinstall my programs (which I lost when my hard-drive crashed) on my Mac Book.
The unit works well, having used my mac os x Leopard Cd.
I am however, unable to load my Address Book (from a stick) and some pictures from a Cd which used to work previously on the unit.
Can you help?

I am trying to reinstall my programs (which I lost when my hard-drive crashed) on my Mac Book.
The unit works well, having used my mac os x Leopard Cd.
I am however, unable to load my Address Book (from a stick) and some pictures from a Cd which used to work previously on the unit.
Can you help?

Unable to load gpib-32.dll when running the visual basic 2008 program

I installed NI-488.2 into my PC, window 7 64 bit OS.
In the program >> project> add reference>.NET, I successfully add the NI.4882 into my visual basic program.
By the way, this program worked well in another window 7 32 bit PC.
But when I run the program at ildev(BDINDEX,.........), error comes up as "unable load DLL gpib-32.dll".
So when I looked at c:\windows\system32, I can not fine gpib-32.dll.
Doesn't NI-488.2 driver install gpib-32.dll?
How can I install gpib-32.dll?

SeongCho wrote:
Nyc, thank you for your reply.
By the way, I think I did all the link explained.
So I have no problem in adding NI488.2 to my program's reference using "add reference".
The problem is GPIB statement like ildev() looks for "gpib-32.dll".
But there was no gpib-32.dll installed in "c:\windows\system32" so error comes up with "unable to load gpib-32.dll".
I did the same procedure in my another PC(window 7 32 bit OS,my current PC is window 7 64 bit OS), and in that PC I can see the gpib-32.dll in that directory and program run without problem.
I do not know how gpib-32.dll was installed in my previous PC.
Thanks
Seong
Have you looked at the example programs for .NET that install with NI-488.2?
You need to start thinking in terms of .NET

Validation on Investment program position

Dear All,
In current configuration, a WBS element of a project is linked to an Investment program position.
When saving reservations for materials, Can we do a validation for WBS element specified in the Proc. Param of a material and the Investment program position.
Please let me know whether this can be achieved without a customization.
Thanks

I've used both and never had any issues.
But be thoughtful of coding masks (of AR and WBS) in case you use appropriation request creation followed by WBS/project creation.
Regards
Sreenivas

Investment management - Assignment od AR to Multiple program Positions

Hi,
Does any body has worked on a scenario of assigning the appropriation requests to more than one program positions.
I know that the AR can be assigned to more than one position. But i am not able to see this request in IM52 T code which is used to distribute the Budget to measure from Investment program positions.
Request you to share your views.
Thanks
Rajesh

Hi Rajesh,
As I wrote earlier this is a constraint in the system that an investment object (say top level WBSE) can receive budget only from a single IM prog node. You can check this for yourself at the following place:
SPRO=>Investment Management=>Investment Programs=>Master Data=>Define Program Types
Check the 'Budgeting indicators' and uncheck 'Single Assignment' indicator.
When you try to save you'll get following warning message:
=================================================
Only single assignments are allowed when using budget distribution
Message no. AP276
Diagnosis
You specified budget distribution in your program type. When budget distribution is activated, you can assign measures and appropriation requests to only one investment program position. Multiple assignment to different program positions is not allowed.
System Response
The system does not allow the combination of budget distribution and multiple assignment.
Procedure
When using budget distribution, set the 'single assignment' indicator.
==================================================
Further, with every thing being correct, the current status of your Inv measure should allow Business transaction 'Budgeting' other wise this Inv Measure will not be visible in IM52 T-code.
Hoping your client gets convinced with this info.
with regards,
Ravi
Edited by: Ravi Shrivastav on Mar 14, 2009 7:06 AM

How to change Investment program position assignd to a wbs element

Hi all,
Could you please help me to find out which bapi can do necesary changes for a particular wbs element like investment program position and year.
The Investment position and year can be showed in cj02 transaction for a particular wbs element.
Thanks in advance,
Sourya Prakash.

Hi,
You can use BAPI_PROJECTDEF_GETDETAIL to get relevant details. If that does not serve, you can go through the list available on this link ---
http://wiki.sdn.sap.com/wiki/display/PLM/HowtouseBAPIinProjectSystem+Module
Thanks.
Kumar Saurav.

HT4061 I am unable to load Adobe Flash player on my Apple Ipad are there any clues out there how to by pass this,I can not get certain programs without it ,so I am returning my IPAD,any other programs I can load to get my programs

I am unable to load Adobe Flash player on my Apple Ipad are there any clues out there how to by pass this,I can not get certain programs without it ,so I am returning my IPAD,any other programs I can load to get my programs

Apple's iOS platform (iPhone, iPad, and iPod Touch) has never, and will never support flash.
First on this; Thoughts on Flash. This is from Steve Jobs regarding Apple's views on Flash (2010)
Second; Adobe stops making Flash for mobile devices. This is from Adobe themselves last year stating that they would stop making Flash for mobile devices.
If you can find the App equivalent of the programs you are looking for, then congratulations, however, if you require specific 'programs' requiring flash, then the iPad is certainly not for you, and returning it would be the best choice (granted you are still within the return period).
The lesson in this; Research what a device can and cannot do prior to purchase

Unable to load Program Position Hierarchy in Investment Management

Similar Messages

Maybe you are looking for