Unable to load the data from PSA to INFOCUBE

Hi BI Experts, good afternoon.
    I am loading 3 years data( Full load ) from R/3 to Infocube.
   So loaded the data by monthwise. So i created 36 info packages.
  Everything is fine. But i got a error in Jan 2005 and Mar 2005. It is the same error in both months. That is Caller 01and caller 02 errors( Means invalid characteristics are there PSA data )
So i deleted both PSA and Data target Requests and again i loaded the data only to PSA.
  Here i got data in PSA without fail.
  Then i tried to load the data from PSA to Infocube MANUALLY.
But its not happening.
  One message came this
       SID 60,758 is smaller than the compress SID of cube ZIC_C03; no        request booking.
   Please give me the solution how to solve this problem.
  Thanks & Regards
     Anjali

Hi Teja,
   Thanks for the good response.
  How can i check whether it is already compressed or not?
  Pls give me the reply.
  Thanks
          Anjali

Similar Messages

  • Error when loading the data from PSA to ODS......

    Hi BW guru's,
    i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
    Please give a step by step guidelines for me...
    the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
    thanks in advance,
    ashok.

    hi ashok,
    u can push data from  psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
                                                 or
    In ods > delete the failed request>goto the processing tab-->select 3rd option   " psa and then subsequentially to data targets ", --> schedule the infopackage.
    bye
    sunil

  • Error while loading the data from ODS to InfoCube

    hai
    Im trying to load the data from ODS to InfoCube for particular year .
    But it says that there is a source system problem .
    why it is like that .
    pls tell me
    i ll assing the points
    rizwan

    Hi Rizwan,
    you didn't mention the error message in details. there could be a few places to be checked:
    - check if BW itself source system is active and in tact and reactivate if necessary
    - check if update rule is active and reactivate if necessary
    - check if ODS is active and reactivate if necessary
    Regards,
    Lilly

  • Error while loading the data from PSA to Data Target

    Hi to all,
         I'm spacing some error while loading the data to data target.
    Error :  Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
    Details:
    Requests (messages): Everything OK
    Extraction (messages): Everything OK
    Transfer (IDocs and TRFC): Errors occurred
          Request IDoc : Application document posted
          Info IDoc 2 : Application document posted
          Info IDoc 1 : Application document posted
          Info IDoc 4 : Application document posted
          Info IDoc 3 : Application document posted
          Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
    Processing (data packet): Errors occurred
          Update PSA ( 2462  Records posted ) : No errors
          Transfer Rules ( 2462  -> 2462  Records ) : No errors
          Update rules ( 2462  -> 2462  Records ) : No errors
          Update ( 0 new / 0 changed ) : Errors occurred
          Processing end : Errors occurred
    I'm totally new to this issue. please help to solve this error.
    Regards,
    Saran

    Hi,
    I think you are facing an invalid character issue.
    This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
    I will add the step by step procedure to edit PSA data and update into target (request based).
    In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
    Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
    Identifying incorrect records.
    System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
    1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
    2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
    3. Then you can go to PSA and filter using the incorrect records based on the particular field.
    4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
    If you want to confirm find the PSA table and search manually."
    Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
    Steps to resolve this
    1. Force the request to red in RSMO > Status tab.
    2. Delete the request from target.
    3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
    4.Edit the record
    5. Save PSA data.
    6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
    Refer how to Modify PSA Data
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
    This should solve your problem for now.
    As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
    RSKC --> type ALL_CAPITAL --> F8 (Execute)
    OR
    Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
    Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
    Refer
    /people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
    /people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
    /people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
    http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
    For adding Other characters
    OSS note #173241 – “Allowed characters in the BW System”
    Thanks,
    JituK
    Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

  • Unable to load the data into Cube Using DTP in the quality system

    Hi,
    I am unable to load the data from PSA to Cube using DTP in the quality system for the first time
    I am getting the error like" Data package processing terminated" and "Source TRCS 2LIS_17_NOTIF is not allowed".
    Please suggest .
    Thanks,
    Satyaprasad

    Hi,
    Some Infoobjects are missing while collecting the transport.
    I collected those objects and transported ,now its working fine.
    Many Thanks to all
    Regards,
    Satyaprasad

  • Unable to Loda the data into PSA.

    Hi Xpert,
    i am uanble to load the data into PSA.
    my source system is not R/3,it is BI.
    (ctually we are xtracting the data (from a cube) with the help of programm to a table and then i am creating a generic data ource on that table and loading the data to my cube.)
    i am getting this error message.
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
    Then i replicated the data source and activate ti also then also i am getting this error message.
    when i am checking my data source on RSA3 i am getting this error message,
    Two internal tables are neither compatible nor convertible.
    t happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLAQBWEXR" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    or analysis
    You attempted to move one data object to another.
    This is not possible here because the internal tables concerned
    are neither compatible nor convertible.
    gger Location of Runtime Error
    Program                                 SAPLAQBWEXR
    Include                                 LAQBWEXRU01
    Row                                     419
    Module type                             (FUNCTION)
    Module Name                             AQBW_CALL_EXTRACTOR_QUERY
    Regards,
    sat534

    Hi
    Problem looks to be with generic datasource
    share details of data source and how you created it.
    Regards
    Sudeep

  • Regarding  Loading the data from DSO to cube.

    Hello Experts,
    I have DSO which loads data from psa  using 7.0 tranformation (using DTP).  And i have a cube which loads the data from that DSO using 3.x transfer rules. Now i have deleted the init request for a infopack before load the data into DSO. But when i load the data from DSO to cube by  right click on DSO -> click On Additional Functions -> update the 3.x data to targets, It is giving me an error like 'Delete init. request REQU_4H7UY4ZXAO72WR4GTUIW0XUKP before running init. again with same selection
    Please help me with this.
    i want to load the data in the init request to cube..
    Thanks

    Hi Shanthi,
    Thanks For reply. I have already deleted the init request from source system to DSO and then i have tried still i am getting the error.
    Thanks

  • ITunes was unable to load provider data from Sync Services

    Hello,
    My itunes says : "iTunes was unable to load provider data from Sync Services", when i connect my iphones.
    My iphones sync fine on my other computer.
    This problem occurred when formatting my pc from work.
    And this problem prevents me only sync tab "info" (contacts, calendar and Outlook). This does not prevent me to synchronize other tabs.
    I already tried to reinstall itunes, and the diagnostic option.
    Thanks in advance.

    This problem has been ongoing since 9.2 came out ... i.e. quite some time.
    I uninstalled and then removed all traces off Apple applications, then reinstalled back to the prior version and ran with no problems.
    When I upgraded to V4 iPhone software I had to upgrade again and ran into the same problem.
    Upgrading from Outlook 2000 to Outlook 2003 was of no benefit.
    I have purchased Sync2, set up a gmail account and sync over wireless from Outlook to gamil, then from gamil to iPhone.
    This only does calendar and contacts (haven't found a solution for notes) but waiting for Apple to sort this will probably see you old and gray.
    Good luck.

  • ITunes 10.5.3, Unable to Load Class Data from Sync Services, Crashes Repeatedly

    Ever since iTunes 10.5.3 on my Windows 7 x64 box, I've been having serious problems keeping iTunes running:
    1)  Any time I connect my iPhone or iPad, or any time they attempt to sync over WiFi, I get the 'Unable to load class data from sync services' error.  It's worth mention that the iPhone or iPad do actually then proceed to sync correctly, and all media / data is synchronized successfully, as far as I've been able to tell.  I've reset sync history, restored the iPhone and iPad, manually moved the SyncServices directory, set both the iPhone and iPad up as new, completely uninstalled iTunes and the mobile device software, re-installed, and *nothing* I do fixes this issue or even seems to impact it.  Uninstalling iTunes 10.5.3 and reinstalling iTunes 10.5.2 resolves this error.
    2)  iTunes 10.5.3 has serious crashing problems on my machine, though I've searched through forums and found a lot of other people with the problem.  In my case, sporadically as iTunes access the iTunes store (for example, I can always make it happen by subscribing to the Diggnation podcast and telling it to refresh the podcast), I get a full application crash which generates the following event in the event log:
    Faulting application name: iTunes.exe, version: 10.5.3.3, time stamp: 0x4f14cc3d
    Faulting module name: KERNELBASE.dll, version: 6.1.7601.17651, time stamp: 0x4e211319
    Exception code: 0x80000003
    Fault offset: 0x0001280c
    Faulting process id: 0x564
    Faulting application start time: 0x01cce78789dc009a
    Faulting application path: D:\Program Files (x86)\iTunes\iTunes.exe
    Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
    Report Id: ecc77400-537a-11e1-b809-00248c196007
    Again, uninstalling iTunes 10.5.3 and re-installing iTunes 10.5.2 fixes this issue as well, but I really shouldn't have to do that.  Is there any actual solution to these problems other than dowgrading to an older version?
    Yes, I'm running current malware protection (and my system is clean) and yes, I've already checked any other obvious culprits to make sure I don't just have a corrupt library or file somewhere that's causing it.  My Windows 7 install is completely up to date from a Windows Update perspective and also from a driver perspective (even including the motherboard and chipset drivers).  I made sure to do a system file integrity check (sfc /scannow) and it confirmed my install of Windows isn't suspect, but beyond all that I was able to reproduce these failures on a completely separate machine running Windows 7 x64, without any of my media library or data on it -- iTunes 10.5.3 just seems to be bad news on Windows 7 x64 for me, even though I know there are definitely people are using it successfully.  I don't get any other application crashes for any other applications, and I've never had an issue like this with any previous version of iTunes...
    Last but not least, in case it matters, I'm running iOS 5.0.1 on both the iPhone4 and the iPad2.  The iPhone4 is the GSM AT&T model and the iPad2 is the CDMA Verizon model.

    OK, I've given up.  Uninstalled iTunes 10.5.3 permanently.  It's a shame, 10.5.2 works perfectly but 10.5.3 is a complete and total cluster for me.
    Anyone with the same problems who hasn't done this already, just uninstall iTunes and the Apple Mobile Device Service in your Add/Remove Programs, then re-install iTunes 10.5.2.  You won't lose your library or any settings or apps, it will just go back to working again.
    I wish Apple would acknowledge this so that I'd at least know it would be fixed in the future.

  • Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it fr

    Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it from system registry. My system is Windows 7 64bit.

    UPDATE: The true error is : '
    "itunes was unable to load data class information from sync services"
    Any of the topics didnt work.
    Sync on my wife's laptop works.

  • Itunes was unable to load provider data from sync services. Reconnect or try later

    Hi everyone
    This issue has got me stumped.
    I have a Dell Vostro desktop computer with Windows 7 SP1 64 bit edition.
    I used to be able to sync now I cannot bakup or sync.
    The device is an iphone 4s with the latest software IOS 5.1.
    Itunes is version 10.6.0.40, the latest.
    To try to fix this problem I removed itunes/quick time completely. Removed Bonjour, Apple Application Support, Apple Mobile Device Support, Apple Software Update,
    Deleted the itunes and quick time folders, the common file folders and files, deleted anything related to able under appdata local and roaming, removed apple folder under program data, scanned through registry and removed all apple entries.
    Then I rebooted the computer, re-installed itunes/quicktime and have the same error appear again.
    I have gone through this process at least 5 times , but still keep getting the same error, cannot go past it.
    I found a solution on this forum but it only applies to MACOS, could not find anything suitable for windows 7 environment.
    Also searche the web high and low and tried several different advice from people.
    This has to be a bug with Itunes! I would like to hear from Apple developers and programmers why I have to suffer so much to sync my device.
    As a last resort I am planning to rebuild windows 7 from scratch but is is a big job.
    Tried also to disable firewall, antivirus, check the apple windows services are running, nothing works to get me past this error.
    Please help someone!
    Thanks and regards
    Alfred

    Did you have a look ath this (rather) long thread about it?
    https://discussions.apple.com/message/17214161#17214161 , for example:
    danielfromkongsvinger
    Re: Unable to load provider data from Sync Services 
    16.12.2011 20:21 (in response to wisniak)
    "I then followed a tip found in PCWorld  and performed the following:
    1. Make sure iTunes isn't running.
    2. Click Start, type regedit, then press Enter.
    3. Navigate to this Registry location: HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Layers
    4. Look in the main pane for a key that refers to iTunes. If you find one, delete it, then exit the Registry.
    5. Start iTunes. The offending message should be gone!"
    This actually worked for me! I have struggeled with this error for years, and now it's gone. Thanks!

  • ITunes was unable to load provider data from Sync Services. Reconnect or try again later

    i just had this message for the fist time when trying to sync my iphone 4: "iTunes was unable to load provider data from Sync Services. Reconnect or try again later"
    what i did is that:
    - i unplugged my iphone 4
    - clicked on "edit" in itunes, "Preferences", "devices", "reset synck history"
    - Uninstalled itunes
    - restarted the lap top
    - reinstalled itunes
    then i tired and the iphone synced fine. i tried it a few times and it was fine.
    but i have 2 questions:
    1- could this be cause by excessive syncing, since i do sync my phone almost twice a week.
    2- is what i did good enough for a solution or do i need to rename folders and resort to the other solutions provided?

    OK
    Here's what I did:
    1. Copy all of the contents in C:\Program Files\Common Files\Apple\Apple Application Support to C:\Program Files\Common Files\Apple\Mobile Device Support folder, overwriting anything it if asked.
    2. Rright-click on the Computer icon on your desktop (or in the start menu) and select Properties. Click on Advanced System Settings. Then clik on Environment Variables. If you don't have a user variable called PATH, click New... and add it, or select it and click Edit...
    Now, add to the beginning of the user PATH the following two directories:
    c:\program files\commmon files\apple\Apple Application Support
    c:\program files\commmon files\apple\Mobile Device Support
    Be sure to put a semi-colon (;) between the two directories.
    Click OK three times to save your settings.
    Step #2 might require a reboot.
    After these 2 steps sync works again (touch wood).
    Seems that sometimes there's an additional possibility (which I didn't perform):
    If you are still having problems after following these steps, it's possible another application uses one of the same DLLs as iTunes (but a different version) and Windows is finding it in the PATH before the Apple file paths added above. You can check this by opening a DOS command prompt window and executing the following commands:
    where libxml2.dll
    where sqlite3.dll
    where libtidy.dll
    Examine the pathnames listed by these commands. If any paths are listed before the ...\Common Files\Apple\... paths, you'll want to remove those paths from the PATH environment variable.

  • TS1717 I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

    I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

    In the course of your troubleshooting to date, have you also worked through the following document?
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • Itunes is unable to load provider data from sync services

    When l plug my iphone4 into my laptop ,to try and take some playlists off the phone ,l get the message itunes is unable to load provider data from sync services ,, what am l doing wrong ,,l want to sort this problem out ,,thank you Pete ,

    In the course of your troubleshooting to date, have you worked through the following document?
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • Itunes was unable to load provider data from sync services. What is this?

    When I sync my iphone 3G with itunes, I get message as follows.
    itunes was unable to load provider data from sync services.
    What is this?

    I had nearly the same problem. I am also a user of UltraEdit from IDM Computer Solutions. Are you? My problem was fixed by adjusting to remove a conflict between the two. (both use same-named DLL but different versions.) If this sounds like your issue, post here and I'll reply with more detail.
    -Stephen

Maybe you are looking for