Unable to locate folders on mac moved from external drive

Hello Experts,
I purchased a Macbook Pro 15 days back(MD102). On 18th Aug, I connected my External HD(Buffalo) accessible only on Windows to my Windows 7 and created a LAN connection between MAC and Win7 so that I can access the files of HD and Move them from HD connected on my WIN to MAC.
Now, all the files and folders were moved and the HD was empty, but I saw them grayed out in the folder on MAC where I copied the,. I cannot open the files and folders.
I read somewhere on forums to make alias, which didn't worked. Then I read somewhere that moved those folder to a new folder, I did that and still not able to access them and I did and UNDO, now the folders are not there in the previous folder and not in the new folders and they disappeared.
These are very important folders for me. PLEASE HELP!!!
Thanks,
bg_16

No, the files are not on windows or on HD. I moved the files i.e. cut and paste from the HD connected on Win and directly copied them to MAC as the HD was not readable on MAC.
I notice that the files and folders were there but they were grayed out, but when I copied them to new folder on MAC and did UNDO they disappeared.
I assume they are somewhere on the MAC drive as I haven't moved anything to Trash and not yet emptied the trash once since I got this MAC.

Similar Messages

Time Machine backups were moved from external drive to HD Trash

I've since learned that I cannot delete these from the Trash and should not have moved them there however, now what do I do? They are preventing me from Emptying anything from the Trash.

You can delete them but it may take days or weeks to complete. Backup your files.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years

My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years and I can't recall how.

If you had stored your catalog files on an external drive, then all you have to do is double-click on them to open them and use them.
Or you could move them to the internal drive and double-click on them once the move is completed.
To create a single catalog file from multiple ones, you could use File->Import from Another Catalog

How do install program from external drive to mac book air

how do install program from external drive to mac book air

DVD or CD sharing: Using Remote Disc - Apple Support

Elements 12, trouble restoring the catalogue from an external drive on my new Mac to another external drive - catalog too big for Mac HD.

I have completed a backup onto an external drive using Elements 12 on my PC running Windows XP. I am now trying to restore this backup onto my new Mac using another external drive as the destination as the catalog is too big to fit onto the Mac internal HD. All seems OK until I click the restore button then I get an error message "The Disc Drive in Mac HD does not contain a valid backup" The file names on the backup drive are visible on the Mac so I presume this backup must be valid so why is there a reference to the Mac HD?

System Preferences - Sharing. If you cannot find System Preferences, then use Command - Spacebar and type System Preference and when you see it in Spotlight (uper right) hit return.

How to reinstall iTunes and not lose everything from external drive.

I had to reformat my hard drive. All my iTunes files were (and still are) on an external drive.
When I download the latest version of iTunes, I installed and set up my preferences to change the location of iTunes Media File to External Drive J:\iTunes\iTunes Music.
When iTunes installs, it creates files and folders in C:\Users\Userxyz\Music\itunes
So....Because iTunes didn't show any of my music, playlists, apps, etc. and because I had changed where to keep media files,
I selected the "Add Folder to Library" option
iTunes successfully displays all the music from this external drive and left the music files where they were.
But....it also copied all of this music to a folder on my desktop called "Copy of Itunes". Now, I have 3 *itl and "xlm files. One on External Drive J, another in Music\iTunes on Drive C, and a 2nd in Copy of iTunes on the desktop.
Missing from iTunes are my purchases. All apps, purchased and free. Playlists.
I have a folder "Mobile Applications" on the external drive and in Copy of iTunes, but both are empty.
I wonder if I already lost my purchases.
I would also like to keep my files on an external drive because I don't have enough space to keep iTunes on my main drive.
I also use Vista.....
I hope someone can help. This is all very confusing
Jeri

When you say all of your iTunes files were on the external drive, do you mean all, or only the stuff that's inside the red outline below. The most important part of your library is the database file iTunes Library.itl which holds the records of your playlists, ratings and all other data that doesn't get stored in tags.
Typical layout of iTunes folders:
When the media folder is inside the main iTunes folder as shown above then the library is portable, and if the library is relocated to an external drive it will survive a wipe of the internal drive. However most users typically split their library when they find they are running out of room on the internal drive by choosing a new locaton for the media folder and then consolidating.
If this is what you have done, and you don't have a backup of the library files, the iTunes Library.itl file in particicular, then your old library is lost forever. If you do have the files then it may be possible to get the right library file reconnected to the media provided you haven't been moving things around randomly.
You can check each of the .itl files that you have on your computer in turn using the hold-down-shift-when-starting-iTunes method. If one of these has the correct playlists, and the drive letter of the external drive is the same as before, then it should all work.
tt2

Can I move a sparsebundle from external drive to bootcamp for temp backup?

i am in my windows 7 boot camp install and I am trying to move a sparsebundle /off/ a Mac OSX journaled external drive to the Boot Camp drive but I am getting an error that says:
could not find this item. this is no longer located in the G:\Data...your sparsebundle...\bands.
is it not possible to move a sparsebundle like this? I'd like to move it off the drive so I can use the external drive and I have the space on my internal drives...
thanks
background: i moved a sparesebundle to an external drive (from within Disk Utility as I recall) so that I would have a backup when I had to reformat my Time Capsule due to some issue. Now I need the external drive to run a clone to but I'd still like to hang onto this sparsebundle in case I deleted a dumptruck worth of data moving info around and playing with dropox.

hotwheels 22 wrote:
you're the man.
for future reference can i please just ask you if there are any restrictions on moving these from mac hd to mac hd in any way? I remember when I had to get it off the TC that I did this through Disk Utility for some reason.
Not that I know of. It will take quite a while, of course, especially over a network.
The complication with copying from a TC via the Finder is, you have to locate it via the Finder by clicking on the Time Capsule in a Finder Sidebar or on your desktop, then double-click the volume to be able to see the sparse bundle. Then you can drag it.
/Also/ can I please ask you if I should /see/ a Time Capsule from a boot camp partition or from a windows virtual machine or even from a laptop on the network?
As I mentioned earlier, I don't do Windoze.
I think you should be able to see the TC itself from any computer on the network, and the HD as well (unless, perhaps, it's protected by a password), but I have no idea how to do that in Windoze.
Perhaps one of our networking gurus will pop in with a better answer . . .

Broken in Logic 9?: Reindex loops from external drive

Adding loops from an external drive in Logic 9 does not seem to work any longer. It used to work great in L8. Anyone have similar experiences? Know any work arounds? Is it a bug? If it's a bug I'll file it with Apple.
Previously in Logic 8 it was easy to reindex loops on an external drive:
(1) Delete the loop indexes from root/Library/Audio/Apple Loops Index
(2) Use Finder to locate the loops on the external
(3) Drag the loop folders into the L8 media browser.
(4) L8 asks if you want to copy the loops or use them from their present location. Select present location intsead of copy locally.
(5) L8 takes 5-20 minutes to build index of loops from external drive
I have tried this procedure several times in L9 without success. Instead I get the following:
(1) Delete the loop indexes from root/Library/Audio/Apple Loops
(2) Use Finder to locate the loops on the external
(3) Drag the loop folders into the L8 media browser.
(4) L9 ask for my admin password.
(5) Enter my password
(6) I'm NOT asked if I want to copy loops locally or use them in their present location. Instead a reindex progress dialog comes up for 2 seconds then goes away.
(7) In the end nothing happened. No loops copied, indexed, or anything
There is only one way I managed to get loops into L9 but it is exactly what I'm NOT looking for:
(1) In the folder with all my loops spotlight search ".CAF" (In this case want to reindex Apple content which is all CAF)
(2) Make sure to click "show more" at the bottom of the search results.
(3) Drag the search results to the loop browser.
(4) L9 indexes them all right, AND also copies them to my user library! All 30 GBs worth. Definitely not what I want.
In the end, I had to reinstall the Loops from the DVDs and specify an external location for them. (This whole mess got started when I tried to move the GarageBand and iLife loops to an external drive. The installer does not let you specify a location for them.)
Just so you know I've done some homework:
I've scoured other Logic forums and found these relevant threads that in the end did not solve the issue. They mostly seem to refer to Logic 8 which does not have this issue.
@ LUG
Thread 1
@ Logic Pro Help
Thread 1
Thread 2
Thread 3 this fellow seems to have a similar problem as I. He drags folders into the loop browser but nothing happens.
@ Apple Discussions
Thread 1
Thread 2

I just installed LP9 and all my loops and samples are on external drives. The drag and drop onto the browser method worked fine and I WAS given the option to move the files or not. The only exception to the above is Ultrabeat samples. They seem to want to be on the System drive.
RW

Problems booting from external drives

Ever since I got this 6-core 2013 MacPro (January 2015), I have had strange problems and glitches, but for this posting, I am talking about problems being able to boot up from external drives. I took the 4 external drives out of my old 2009 MacPro and put them into a 4-bay Thunderbolt enclosure. This enclosure can be configured as a RAID if all drives are the same (which they are not) or it can just be a place to be able to access all 4 drives. I used to be able to boot from each of those drives on the older MacPro but I am unable to do so now. They show up in the System Preferences/Startup Disk but if I choose one, it just reboots into the new MacPro drive. I even tried pulling out a couple of the drives and mounting each into a USB 3.0 (Sabrent) dock and still I could not boot from those drives which have the latest version of Yosemite. Yes, they are formatted correctly. I used to boot from them. I was able to clone one of the drives to a Seagate USB 3.0 hard drive and boot from that. Although, the clone was not perfect. It didn't transfer all my settings so I could recover some logins and serial numbers I wanted that I have never been able to retrieve since I got this new Mac.
Yesterday, I formatted a 32GB flash drive and tried to install Yosemite on it. I planned to put DiskWarrior on it. When I started to install Yosemite (from a saved download) it let me choose that drive, but when it restarted before installing, I was right back where I started on my MacPro's hard drive.
Is this normal behavior for the 2013 MacPro? Or is it just mine? I am beginning to think I may have a lemon since I have had other strange problems that don't go away.

Not all external devices are bootable. First stop would be involve whoever handles the 4-bay Thunderbolt. Seeing how it has a bridge most likely in order to support RAID mode that may not have the correct frmware or other reasons.
https://bombich.com/kb/ccc4
https://bombich.com/kb/ccc4/search/bootable%20volume
CCC is the only program I would be using.

Importing iTunes library from external drive

Cannot play iTunes after importing library from PC into Mac.

Simply highlight and delete
But doing so it will also trash all playlists, data added, ratings, etc. Something the OP said about having to rename lots of files during a previous library rebuild suggests to me they may even be stored in WAV format. If the OP deletes them from the library all the labels will be lost, they will get added back with only file names as track information and they will have to be renamed again.
This will delete not only the reference to the file, but the library.itl file that Limnos refers to.
I don't think so. The file will still be there, it will just be stripped of any entries.
Now you should have an empty iTunes.
Now go to where the files are on your external drive. Two options. Choose the one you prefer:
In iTunes, go to >> Preferences >> Advanced -- Select the location of your files on the external drive. Tick OK and iTunes should re-add all the files. Depending on how many, it may take some time as it organises everything. But your files will remain on the ext drive. Any new songs you get will get added to your external drive by default now.
Changing this preference setting will not get iTunes to inventory the files in the media folder, nor add them. It simply tells iTunes to put any new media added in the location selected.
Or, select the files on your ext drive, hold down OPTION and drag the files into iTunes. It will add them to your library, but leave the files on your external drive. Note that any new files you add directly to iTunes (like from the store) will be added to your default iTunes folder, not the external drive.
Well, yes, it will do it, essentially creating a brand new library that the OP will have to organize again vs. using the existing organization. My reservations about the need to rebuild the library from scratch still exist.
If the OP desires to keep storing media on the external drive in the long run it is best simply changing the preferece to use the external drive for media storage.

Can't read iPhoto library from external drive

I suddenly can't can't read iPhoto library from external drive. I have talked to WD and nohing is wrong with the network drive. I can open images and files from it. But, I can't read in iPhoto Library.

Network Drive? a NAS?
iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, exporting, saving edits and sharing the photos.
Basically, you need to move the library to a correctly formatted disk.

External Drive with Time Machine, booting from external drive with utilitie

I'm using Time Machine now with
a LaCie 1TB external hard drive.
Everything works fine.
But, I've been wondering:
Can I place a program like TechTool
on the external drive (that Time Machine uses)
and boot from that external drive.
I would like to be able to do that,
because diagnostics and repair programs
only works properly and fully when they run from
external drives. Anything on the internal drive can be repaired
and examine. Impossible to do if Techtool is on the same
drive that's been examined.
Any thoughts as to what I should do?
Thanks
iMac, Leopard, Time Machine, Lacie Quadra 1TB drive.
P.S. Stupid question: If my computer crashes, and I reboot from Time Machine
(from the external drive) how does the computer know which backup to take ?!?
Isn't there many versions of the OS on the Time Machine backup taken at different times?

pitou wrote:
P.S. Stupid question: If my computer crashes, and I reboot from Time Machine
(from the external drive) how does the computer know which backup to take ?!?
Isn't there many versions of the OS on the Time Machine backup taken at different times?
As V.K. says, you can't boot from TM backups.
But you can restore your entire system from any one of them, per the procedure in #14 of the Frequently Asked Questions *User Tip,* also at the top of this forum.
You can also selectively restore from them, while running normally. See #15 in the FAQ Tip.
You might want to review these:
Time Machine Tutorial
Time Machine 101
How to back up and restore your files
Time Machine Features
Apple - Support - Mac OSX v10.5 Leopard Time Machine
and perhaps browse the rest of the FAQ Tip.

Can Disk Utility get SMART status from external drives?

I recently updated my backup plan with a NewerTech quad-interface dock and a WD Caviar Green hd. I'm using the FW800 interface to connect to my iMac (10.6.7) Everything works perfectly, as expected. I noticed, though, that Disk Utility cannot report the SMART status on the new WD drive. DU simply says "Not Supported" under SMART Status.
Is Disk Utility telling me that it doesn't read SMART status from external drives? Or is it telling me that the new drive doesn't support SMART (which I would find highly unusual)? And, if it's Disk Utility that can't read the status, are there any third-party apps that can report the SMART status on an external drive?
Thanks,
JimC

Unfortunately I cannot speak to the NewerTech enclosure, but in principle it appears to be possible to have SMART information displayed even for external drives if the enclosure's bridge controller chip allows it.
My experience:
I've used two MacPower Pleiades FW800/400/USB/eSATA enclosures for several years and I've now supplemented them with two additional inXtron enclosures. They all work as expected daisy-chained to the iMac.
The interesting thing is that the inXtron enclosures came with a CD with some software on it ("Smart AP") which is not available for download, notably a Dashboard Widget for displaying actual and maximum temperatures, total hours of operation, start/stop cycles, drive model and serial number.
This widget is complete garbage, though – it is a nauseating nightmare of extreme over-design at the expense of even basic usability:
http://www.inxtron.com/information-center/smart-ap-for-external-hard-drives
To make matters even worse, it can only display the above information for the first external drive connected.
BUT: This Widget internally calls a command line utility which does the actual parameter retrieval, and that one can be called from the terminal as well.
So after installing the software from CD and effectively discarding the Widget, I checked out the command line utility in the Terminal and found that this utility actually reported data about ALL my enclosures, both the inXtron and the MacPower ones (there seems to be firmware compatibility across these):
(The '$' is supposed to be Terminal's bash prompt – type in only the rest of the respective line.)
$ /Applications/MacpowerAP/GetSMART 1
29 50 13 8
53 67 645 15829
52 53 90 7105
51 52 18 13
Each line reports the following for one connected enclosure:
[temp] [maxtemp] [cycles] [hours]
The drives are reported first USB, then FireWire drives, each in the order of first connection / mounting.
$ /Applications/MacpowerAP/GetSMART 2
WD-WCA**************
WDC WD30EZRX-00MMMB0
5TE09***************
ST31000333AS-00MMMB0
5TE09***************
ST31000333AS-00MMMB0
WD-WMA**************
WDC WD30EZRS-00J99B0
Each drive gets two lines reported, first the drive's serial number ("***" blocking out my exact ones), then the drive model.
$ /Applications/MacpowerAP/GetSMART 3
29 50 13 8
WD-WCA**************
WDC WD30EZRX-00MMMB0
53 67 645 15829
5TE09***************
ST31000333AS-00MMMB0
52 53 90 7105
5TE09***************
ST31000333AS-00MMMB0
51 52 18 13
WD-WMA**************
WDC WD30EZRS-00J99B0
This combines both of the above.
$ /Applications/MacpowerAP/GetSMART 5
disk4
disk1
disk2
disk3
This reports the mounted disk names (referring not to the volume names but to the internal Unix names as in /dev/[drive]); Numbering is in connection / mounting order, the actual sequence is as always USB drives, then FireWire drives.
$ /Applications/MacpowerAP/GetSMART 6
USB
1394
1394
1394
This reports the connection interface for each drive in the same sequence as all other commands.
$ /Applications/MacpowerAP/GetSMART 7
MPT934DS1.20.0104.00
MPT934DS1.20.0104.00
This might report the firmware revision or something like that.
These are the commands I know about, and they apply only to the "Smart AP" software supplied with current inXtron enclosures, but it may be possible that other brands use it as well.
I have not been able to identify information about the self-test (early(?) failure warning), but it might be contained as well in the data reported above.
As always, your mileage may vary and you should never do such experiments without FIRST making sure you've got backups of your data and that such backup is not connected during experimentation!
Maybe this can help some people getting the information they need; And maybe there are similar capabilities with other enclosures. At the very least it demonstrates that with the proper firmware in the enclosures themselves and some software on the Mac it IS possible to get at least some of the SMART information from the drive in an external FireWire- or USB-connected enclosure.
None of that is fed into the system's "official" SMART mechanism, though, so no luck using standard mechanisms or applications for it. It's strictly a command-line affair (deservedly disregarding the mishappen Widget).
Good luck!

Why won't photos from external drive stay on my computer (iPhoto) once I disconnect the external drive?

I'm trying to move photos from my external drive to my new computer. When I connect the external drive, I'm able to view all the photos in iPhoto, and I'm able to drag photos to a desktop folder and/or directly into iPhoto. But, when I disconnect the external drive, I no longer have access to the photos on my computer. I'm sure there's a step I may be overlooking but I'm using the same process I've used in the past and cannot determine next steps.

Thanks so far.
I'm currently working on a 2012 MacBook Air 13", running OSX 10.8.
Upon opening my external drive, I've dragged the iPhoto Library to my computer's desktop. When I've opened iPhoto and tried to import the library (from external drive and/or from the desktop), I'm unable to do so, i.e., the library is not highlighted (it won't allow me to click on it).
I can open and view the library from my external drive in iPhoto when the external drive is connected to the computer. But, once the external drive is disconnected from the computer, I'm unable to view the library
I've tried all of the aforementioned when the "Copy Imported Item(s) to the iPhoto Library" is checked.

When trying to transfer a folder from external drive to "users" folder, it says it cannot be modified because it is required by OS X. What does this mean?

When trying to transfer a folder from external drive to "users" folder, it says it cannot be modified because it is required by OS X. What does this mean? How can I transfer the folder?

It sounds like you're trying to replace a home folder. Replace the contents of the folder instead, or use Migration Assistant.
OS X: How to migrate data from another Mac using Mavericks

Unable to locate folders on mac moved from external drive

Similar Messages

Maybe you are looking for