Unable to log in to MDT - tabs

In RWB, I am able to display MDT window.
I am not able to log into the other tabs of MDT - Message Content, Inbound adapter, Outbound Adapter, Queue Monitor.
SSO is not enabled yet.
My user id has almost all the authorizations.
Reg,
-Naveen.

Moorthy,
On one of tabs when I tried to log on, it asks me for user name and PW. After entering PW for 3 times, it fails and gives the following error message.
<b>Client, name, or password is not correct; log on again</b>
Do u think this link is related to my issue.
http://help.sap.com/saphelp_nw04/helpdata/en/b4/e3f741a550c717e10000000a155106/frameset.htm
Thanks,
-Naveen.

Similar Messages

  • Unable to Log In iChat

    Hi,
    So I have had a macbook for a while and quite a bit ago I had a problem with iChat. It was unable to log me in one day, it would constantly try and try until I got the error that I had attempted too many times. I'm not quite sure what is wrong. I called support and they couldn't help me diagnose it so I ended up downloading Adium. Well I just recently bought a Mac Book Pro and I transfered everything over to the Pro, and I am still having the same error with iChat. I'm guessing it's some where in my settings but I can't find it. My log in and pass word are correct...
    Please help
    Sylv

    Hi
    Try logging on to AIM on port 443 rather than port 5190.
    Go to IChat in the menu bar > Preferences > Accounts.
    Log out of AIM and then use the Server Settings tab
    Set the port to 443.
    Log back in again.
    Tony

  • Unable to see Applcation under navigate tab in Hyperion(9.3.1) workspace

    Hi,
    I am new to Hyperion products. I have installed all Hyperion 9.3.1 products as per installation documnet. I could connect to workspace. I am unable to see APPLICATION under NAVIGATE tab. Can somebody help on this.
    Thanks
    SP

    Hi John,
    Now we are able to start the service "Hyperion S9 EPM Architect Process Manager".
    Also we are able to start "Performance Management Architect Web (tomcat 5)" .
    Still unable to open Dimension Library from the below navigation.
    Navigate-->administer-->Dimesion Library
    Able to open AwbConfig.xml (url : http://hyperion01.in.corp.sa:19000/awb/conf/AwbConfig.xml)
    Getting the below error.
    Trace: com.hyperion.awb.web.common.BaseService.openSession(BaseService.java:112)
    com.hyperion.awb.web.common.BaseAction.checkWebSession(BaseAction.java:64)
    com.hyperion.bpm.web.common.BaseAction.execute(BaseAction.java:65)
    org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
    org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
    Exception org.apache.axis.AxisFault rethrown
    java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(Unknown Source)
         at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
         at java.net.PlainSocketImpl.connect(Unknown Source)
         at java.net.SocksSocketImpl.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:153)
         at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:120)
         at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
         at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
         at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
         at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
         at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
         at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
         at org.apache.axis.client.Call.invoke(Call.java:2767)
         at org.apache.axis.client.Call.invoke(Call.java:2443)
         at org.apache.axis.client.Call.invoke(Call.java:2366)
         at org.apache.axis.client.Call.invoke(Call.java:1812)
         at com.hyperion.awb.webservice.sessions.SessionsSoapStub.createSessionFromToken(SessionsSoapStub.java:253)
         at com.hyperion.awb.web.common.BaseService.openSession(BaseService.java:106)
         at com.hyperion.awb.web.common.BaseAction.checkWebSession(BaseAction.java:64)
         at com.hyperion.bpm.web.common.BaseAction.execute(BaseAction.java:65)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1158)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:415)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:300)
         at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)
         at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)
         at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:675)
         at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Unknown Source)
    Exception java.net.ConnectException rethrown
    java.net.PlainSocketImpl.socketConnect(Native Method)
    java.net.PlainSocketImpl.doConnect(Unknown Source)
    java.net.PlainSocketImpl.connectToAddress(Unknown Source)
    java.net.PlainSocketImpl.connect(Unknown Source)
    java.net.SocksSocketImpl.connect(Unknown Source)
    Also find the contents of the bpma.log below
    2008-04-25 17:17:49,686 [main] INFO com.hyperion.awb.web.util.WebAppListener - initWebServices(ServletContext) - start
    2008-04-25 17:17:49,686 [main] INFO com.hyperion.awb.web.util.WebAppListener - getClusterController(ServletContext) - start
    2008-04-25 17:17:49,811 [main] INFO com.hyperion.awb.web.util.WebAppListener - getClusterController(ServletContext) - end
    2008-04-25 17:17:49,936 [main] DEBUG com.hyperion.awb.web.util.WebAppListener - checkWebSession(HttpServletRequest) - Getting server DimServer.)
    2008-04-25 17:17:49,967 [main] INFO com.hyperion.awb.web.util.WebAppListener - initWebServices(ServletContext) - end
    2008-04-25 17:17:50,030 [main] INFO com.hyperion.awb.web.util.WebAppListener - contextInitialized(ServletContextEvent) - end
    2008-04-25 17:18:31,218 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - execute(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - start : com.hyperion.awb.web.dimeditor.Action
    2008-04-25 17:18:31,218 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - checkWebSession(HttpServletRequest) - start
    2008-04-25 17:18:31,218 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - getWebSession(HttpServletRequest) - start
    2008-04-25 17:18:31,218 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - getWebSession(HttpServletRequest) - end
    2008-04-25 17:18:31,218 [TP-Processor3] DEBUG com.hyperion.awb.web.dimeditor.Action - checkWebSession(HttpServletRequest) - Found CSS Token in the request.)
    2008-04-25 17:18:31,234 [TP-Processor3] INFO com.hyperion.awb.web.css.CSSConfigApp - getConfigFile() - start
    2008-04-25 17:18:31,234 [TP-Processor3] INFO com.hyperion.awb.web.css.CSSConfigApp - Configuring CSS using URL : http://HYPERION01:58080/interop/framework/getCSSConfigFile
    2008-04-25 17:18:31,234 [TP-Processor3] INFO com.hyperion.awb.web.css.CSSConfigApp - getConfigFile() - end
    2008-04-25 17:18:32,390 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService() - start
    2008-04-25 17:18:32,390 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService() - end
    2008-04-25 17:18:32,390 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService(Server) - start
    2008-04-25 17:18:32,390 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService(Server) - end
    2008-04-25 17:18:32,390 [TP-Processor3] INFO com.hyperion.awb.webservice.util.ConnectionPoolFactory - getServiceUrl(ServiceType) - start
    2008-04-25 17:18:32,390 [TP-Processor3] INFO com.hyperion.awb.webservice.util.ConnectionPoolFactory - getServiceUrl(ServiceType) - end : http://HYPERION01/hyperion-bpma-server/Sessions.asmx
    2008-04-25 17:18:32,390 [TP-Processor3] INFO com.hyperion.awb.webservice.util.ConnectionPoolFactory - createService(ServiceType) - start : http://HYPERION01/hyperion-bpma-server/Sessions.asmx
    2008-04-25 17:18:32,390 [TP-Processor3] INFO com.hyperion.awb.webservice.util.ConnectionPoolFactory - getServiceUrl(ServiceType) - start
    2008-04-25 17:18:32,390 [TP-Processor3] INFO com.hyperion.awb.webservice.util.ConnectionPoolFactory - getServiceUrl(ServiceType) - end : http://HYPERION01/hyperion-bpma-server/Sessions.asmx
    2008-04-25 17:18:32,890 [TP-Processor3] INFO com.hyperion.awb.webservice.util.ConnectionPoolFactory - createService(ServiceType) - end
    2008-04-25 17:18:34,109 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - BaseServiceException(Exception) - start
    2008-04-25 17:18:34,109 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - BaseServiceException(Exception) - end
    2008-04-25 17:18:37,859 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - start
    2008-04-25 17:18:37,875 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - end
    2008-04-25 17:18:37,875 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - start
    2008-04-25 17:18:37,875 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getType() - start
    2008-04-25 17:18:37,875 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getType() - end
    2008-04-25 17:18:37,875 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getAction() - start
    2008-04-25 17:18:37,875 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getAction() - end
    2008-04-25 17:18:37,875 [TP-Processor3] WARN com.hyperion.awb.web.common.DimensionServiceException - errMessage1: java.net.ConnectException: Connection refused: connect
    2008-04-25 17:18:37,875 [TP-Processor3] WARN com.hyperion.awb.web.common.DimensionServiceException - errMessage2: ; nested exception is:
         java.net.ConnectException: Connection refused: connect
    2008-04-25 17:18:37,890 [TP-Processor3] WARN com.hyperion.awb.web.common.DimensionServiceException - exception: <BpmResponse type='error'><actor>none</actor><code>org.apache.axis.AxisFault</code><desc>; nested exception is:
         java.net.ConnectException: Connection refused: connect</desc><trace>com.hyperion.awb.web.common.BaseService.openSession(BaseService.java:112)
    com.hyperion.awb.web.common.BaseAction.checkWebSession(BaseAction.java:64)
    com.hyperion.bpm.web.common.BaseAction.execute(BaseAction.java:65)
    org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
    org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
    Exception org.apache.axis.AxisFault rethrown
    java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(Unknown Source)
         at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
         at java.net.PlainSocketImpl.connect(Unknown Source)
         at java.net.SocksSocketImpl.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:153)
         at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:120)
         at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
         at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
         at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
         at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
         at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
         at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
         at org.apache.axis.client.Call.invoke(Call.java:2767)
         at org.apache.axis.client.Call.invoke(Call.java:2443)
         at org.apache.axis.client.Call.invoke(Call.java:2366)
         at org.apache.axis.client.Call.invoke(Call.java:1812)
         at com.hyperion.awb.webservice.sessions.SessionsSoapStub.createSessionFromToken(SessionsSoapStub.java:253)
         at com.hyperion.awb.web.common.BaseService.openSession(BaseService.java:106)
         at com.hyperion.awb.web.common.BaseAction.checkWebSession(BaseAction.java:64)
         at com.hyperion.bpm.web.common.BaseAction.execute(BaseAction.java:65)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1158)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:415)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:300)
         at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)
         at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)
         at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:675)
         at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Unknown Source)
    Exception java.net.ConnectException rethrown
    java.net.PlainSocketImpl.socketConnect(Native Method)
    java.net.PlainSocketImpl.doConnect(Unknown Source)
    java.net.PlainSocketImpl.connectToAddress(Unknown Source)
    java.net.PlainSocketImpl.connect(Unknown Source)
    java.net.SocksSocketImpl.connect(Unknown Source)
    </trace></BpmResponse>
    2008-04-25 17:18:37,890 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - end
    2008-04-25 17:20:35,940 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - execute(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - start : com.hyperion.awb.web.logon.LogoffAction
    2008-04-25 17:20:35,940 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - preprocess(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - start
    2008-04-25 17:20:35,940 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - preprocess(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - end
    2008-04-25 17:20:35,940 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - getWebSession(HttpServletRequest) - start
    2008-04-25 17:20:35,940 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - getWebSession(HttpServletRequest) - end
    2008-04-25 17:20:35,940 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - execute(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - end
    2008-04-25 17:21:13,504 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - execute(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - start : com.hyperion.awb.web.dimeditor.Action
    2008-04-25 17:21:13,504 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - checkWebSession(HttpServletRequest) - start
    2008-04-25 17:21:13,504 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - getWebSession(HttpServletRequest) - start
    2008-04-25 17:21:13,504 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - getWebSession(HttpServletRequest) - end
    2008-04-25 17:21:13,504 [TP-Processor3] DEBUG com.hyperion.awb.web.dimeditor.Action - checkWebSession(HttpServletRequest) - Found CSS Token in the request.)
    2008-04-25 17:21:14,176 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService() - start
    2008-04-25 17:21:14,176 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService() - end
    2008-04-25 17:21:14,176 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService(Server) - start
    2008-04-25 17:21:14,176 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService(Server) - end
    2008-04-25 17:21:15,144 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - BaseServiceException(Exception) - start
    2008-04-25 17:21:15,144 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - BaseServiceException(Exception) - end
    2008-04-25 17:21:15,160 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - start
    2008-04-25 17:21:15,160 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - end
    2008-04-25 17:21:15,160 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - start
    2008-04-25 17:21:15,160 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getType() - start
    2008-04-25 17:21:15,160 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getType() - end
    2008-04-25 17:21:15,160 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getAction() - start
    2008-04-25 17:21:15,160 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getAction() - end
    2008-04-25 17:21:15,160 [TP-Processor3] WARN com.hyperion.awb.web.common.DimensionServiceException - errMessage1: java.net.ConnectException: Connection refused: connect
    2008-04-25 17:21:15,160 [TP-Processor3] WARN com.hyperion.awb.web.common.DimensionServiceException - errMessage2: ; nested exception is:
         java.net.ConnectException: Connection refused: connect
    2008-04-25 17:21:15,160 [TP-Processor3] WARN com.hyperion.awb.web.common.DimensionServiceException - exception: <BpmResponse type='error'><actor>none</actor><code>org.apache.axis.AxisFault</code><desc>; nested exception is:
         java.net.ConnectException: Connection refused: connect</desc><trace>com.hyperion.awb.web.common.BaseService.openSession(BaseService.java:112)
    com.hyperion.awb.web.common.BaseAction.checkWebSession(BaseAction.java:64)
    com.hyperion.bpm.web.common.BaseAction.execute(BaseAction.java:65)
    org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
    org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
    Exception org.apache.axis.AxisFault rethrown
    java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(Unknown Source)
         at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
         at java.net.PlainSocketImpl.connect(Unknown Source)
         at java.net.SocksSocketImpl.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:153)
         at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:120)
         at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
         at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
         at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
         at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
         at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
         at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
         at org.apache.axis.client.Call.invoke(Call.java:2767)
         at org.apache.axis.client.Call.invoke(Call.java:2443)
         at org.apache.axis.client.Call.invoke(Call.java:2366)
         at org.apache.axis.client.Call.invoke(Call.java:1812)
         at com.hyperion.awb.webservice.sessions.SessionsSoapStub.createSessionFromToken(SessionsSoapStub.java:253)
         at com.hyperion.awb.web.common.BaseService.openSession(BaseService.java:106)
         at com.hyperion.awb.web.common.BaseAction.checkWebSession(BaseAction.java:64)
         at com.hyperion.bpm.web.common.BaseAction.execute(BaseAction.java:65)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1158)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:415)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:300)
         at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)
         at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)
         at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:675)
         at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Unknown Source)
    Exception java.net.ConnectException rethrown
    java.net.PlainSocketImpl.socketConnect(Native Method)
    java.net.PlainSocketImpl.doConnect(Unknown Source)
    java.net.PlainSocketImpl.connectToAddress(Unknown Source)
    java.net.PlainSocketImpl.connect(Unknown Source)
    java.net.SocksSocketImpl.connect(Unknown Source)
    </trace></BpmResponse>
    2008-04-25 17:21:15,160 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - end
    2008-04-25 17:22:12,021 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - execute(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - start : com.hyperion.awb.web.logon.LogoffAction
    2008-04-25 17:22:12,021 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - preprocess(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - start
    2008-04-25 17:22:12,021 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - preprocess(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - end
    2008-04-25 17:22:12,021 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - getWebSession(HttpServletRequest) - start
    2008-04-25 17:22:12,021 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - getWebSession(HttpServletRequest) - end
    2008-04-25 17:22:12,021 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - execute(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - end
    2008-04-25 17:22:29,256 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - execute(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - start : com.hyperion.awb.web.dimeditor.Action
    2008-04-25 17:22:29,256 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - checkWebSession(HttpServletRequest) - start
    2008-04-25 17:22:29,256 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - getWebSession(HttpServletRequest) - start
    2008-04-25 17:22:29,256 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - getWebSession(HttpServletRequest) - end
    2008-04-25 17:22:29,256 [TP-Processor3] DEBUG com.hyperion.awb.web.dimeditor.Action - checkWebSession(HttpServletRequest) - Found CSS Token in the request.)
    2008-04-25 17:22:30,037 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService() - start
    2008-04-25 17:22:30,037 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService() - end
    2008-04-25 17:22:30,037 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService(Server) - start
    2008-04-25 17:22:30,037 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService(Server) - end
    2008-04-25 17:22:45,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - BaseServiceException(Exception) - start
    2008-04-25 17:22:45,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - BaseServiceException(Exception) - end
    2008-04-25 17:22:45,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - start
    2008-04-25 17:22:45,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - end
    2008-04-25 17:22:45,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - start
    2008-04-25 17:22:45,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getType() - start
    2008-04-25 17:22:45,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getType() - end
    2008-04-25 17:22:45,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getAction() - start
    2008-04-25 17:22:45,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getAction() - end
    2008-04-25 17:22:45,413 [TP-Processor3] WARN com.hyperion.awb.web.common.DimensionServiceException - errMessage1: (404)Not Found
    2008-04-25 17:22:45,413 [TP-Processor3] WARN com.hyperion.awb.web.common.DimensionServiceException - errMessage2: (404)Not Found
    2008-04-25 17:22:45,413 [TP-Processor3] WARN com.hyperion.awb.web.common.DimensionServiceException - exception: <BpmResponse type='error'><actor>none</actor><code>org.apache.axis.AxisFault</code><desc>(404)Not Found</desc><trace>com.hyperion.awb.web.common.BaseService.openSession(BaseService.java:112)
    com.hyperion.awb.web.common.BaseAction.checkWebSession(BaseAction.java:64)
    com.hyperion.bpm.web.common.BaseAction.execute(BaseAction.java:65)
    org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
    org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
    Exception org.apache.axis.AxisFault rethrown
    </trace></BpmResponse>
    2008-04-25 17:22:45,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - end
    2008-04-25 17:23:06,851 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - execute(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - start : com.hyperion.awb.web.dimeditor.Action
    2008-04-25 17:23:06,851 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - checkWebSession(HttpServletRequest) - start
    2008-04-25 17:23:06,851 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - getWebSession(HttpServletRequest) - start
    2008-04-25 17:23:06,851 [TP-Processor3] INFO com.hyperion.awb.web.dimeditor.Action - getWebSession(HttpServletRequest) - end
    2008-04-25 17:23:06,851 [TP-Processor3] DEBUG com.hyperion.awb.web.dimeditor.Action - checkWebSession(HttpServletRequest) - Found CSS Token in the request.)
    2008-04-25 17:23:07,335 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService() - start
    2008-04-25 17:23:07,335 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService() - end
    2008-04-25 17:23:07,335 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService(Server) - start
    2008-04-25 17:23:07,351 [TP-Processor3] INFO com.hyperion.awb.web.common.BaseService - BaseService(Server) - end
    2008-04-25 17:23:08,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - BaseServiceException(Exception) - start
    2008-04-25 17:23:08,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - BaseServiceException(Exception) - end
    2008-04-25 17:23:08,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - start
    2008-04-25 17:23:08,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - end
    2008-04-25 17:23:08,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - start
    2008-04-25 17:23:08,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getType() - start
    2008-04-25 17:23:08,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getType() - end
    2008-04-25 17:23:08,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getAction() - start
    2008-04-25 17:23:08,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getAction() - end
    2008-04-25 17:23:08,413 [TP-Processor3] WARN com.hyperion.awb.web.common.DimensionServiceException - errMessage1: java.net.ConnectException: Connection refused: connect
    2008-04-25 17:23:08,413 [TP-Processor3] WARN com.hyperion.awb.web.common.DimensionServiceException - errMessage2: ; nested exception is:
         java.net.ConnectException: Connection refused: connect
    2008-04-25 17:23:08,413 [TP-Processor3] WARN com.hyperion.awb.web.common.DimensionServiceException - exception: <BpmResponse type='error'><actor>none</actor><code>org.apache.axis.AxisFault</code><desc>; nested exception is:
         java.net.ConnectException: Connection refused: connect</desc><trace>com.hyperion.awb.web.common.BaseService.openSession(BaseService.java:112)
    com.hyperion.awb.web.common.BaseAction.checkWebSession(BaseAction.java:64)
    com.hyperion.bpm.web.common.BaseAction.execute(BaseAction.java:65)
    org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
    org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
    Exception org.apache.axis.AxisFault rethrown
    java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(Unknown Source)
         at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
         at java.net.PlainSocketImpl.connect(Unknown Source)
         at java.net.SocksSocketImpl.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:153)
         at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:120)
         at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
         at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
         at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
         at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
         at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
         at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
         at org.apache.axis.client.Call.invoke(Call.java:2767)
         at org.apache.axis.client.Call.invoke(Call.java:2443)
         at org.apache.axis.client.Call.invoke(Call.java:2366)
         at org.apache.axis.client.Call.invoke(Call.java:1812)
         at com.hyperion.awb.webservice.sessions.SessionsSoapStub.createSessionFromToken(SessionsSoapStub.java:253)
         at com.hyperion.awb.web.common.BaseService.openSession(BaseService.java:106)
         at com.hyperion.awb.web.common.BaseAction.checkWebSession(BaseAction.java:64)
         at com.hyperion.bpm.web.common.BaseAction.execute(BaseAction.java:65)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1158)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:415)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:300)
         at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:374)
         at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:743)
         at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:675)
         at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:866)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Unknown Source)
    Exception java.net.ConnectException rethrown
    java.net.PlainSocketImpl.socketConnect(Native Method)
    java.net.PlainSocketImpl.doConnect(Unknown Source)
    java.net.PlainSocketImpl.connectToAddress(Unknown Source)
    java.net.PlainSocketImpl.connect(Unknown Source)
    java.net.SocksSocketImpl.connect(Unknown Source)
    </trace></BpmResponse>
    2008-04-25 17:23:08,413 [TP-Processor3] INFO com.hyperion.awb.web.common.DimensionServiceException - getXml() - end
    2008-04-25 17:34:28,851 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - execute(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - start : com.hyperion.awb.web.logon.LogoffAction
    2008-04-25 17:34:28,851 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - preprocess(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - start
    2008-04-25 17:34:28,851 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - preprocess(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - end
    2008-04-25 17:34:28,851 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - getWebSession(HttpServletRequest) - start
    2008-04-25 17:34:28,851 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - getWebSession(HttpServletRequest) - end
    2008-04-25 17:34:28,851 [TP-Processor3] INFO com.hyperion.awb.web.logon.LogoffAction - execute(ActionMapping, ActionForm, HttpServletRequest, HttpServletResponse) - end
    Thanks & Regards
    Siva

  • I am unable to log in, I am unable to find help for thisz is there any employee that aciutallty can help, is there a link to some actual help from Mozilla orir

    I am very frustrated with Firefox help, there doesn't appear to be any. ,
    PLEASE HELP ME
    I am unable to log into Firefox to be able to sync my new laptop with my Desktop.
    There is more to explain if I could just speak or chat with a real person?
    Please.

    hello,
    thanks for tying to help.
    I followed your advice but it did nothing to change the sync.
    check your SYNC Progress and SYNC Log
    '''''Type the following in URL
    about:sync-log
    about:sync-tabs
    about:sync-progress '''''''
    No change at all.
    How can I "re-sync"?
    any ideas are appreciated

  • "Sorry, we are unable to log you in" message when trying to purchase a product. Any help please?

    I am trying to purchase (or even use a trial version at least) a product in extension manager and it gives me "Sorry we are unable to log you in" message no matter how many times I press "Log in" button.
    Would appreciate any help please

    Hi Alwaysadobe,
    Glad to hear that you have solved the problem. We also got the help from Adobe Exchange team. They gave the steps below for this issue. If you have any other problems, please let us know. Thanks.
    Xiaoyi
    ========================================================================================== ============================
    If the user has already created a new AdobeID and tried to deleted file at the Application Support/Adobe/opm.db and it is still not working he should try this.
    you could suggest that the user closes all applications and Repair Disk Permissions on OSX:
    2. Open Disk Utility, located at /Applications/Utilities/Disk Utility
    3. Select your startup disk on the left of the Disk Utility window
    4. Select First Aid from the tabs
    Click the "Repair Disk Permissions" button
    It is always a good idea to run Repair Disk Permissions on OSX after an update, say from 10.8 to 10.8.x.
    On Windows he can Run sfc /scannow In the command prompt.
    1. Type sfc /scannow and hit Enter.
    He could also try and disable any 3rd party firewall, antivirus programs. I hope this helps.

  • Some accounts on iMac unable to log into Gmail (OS X 10.6.4, Safari 5.0)

    I have 5 accounts configured on my Intel iMac.
    After upgrading to Snow Leopard (OS X 10.6.4), some of the accounts are unable to log into Gmail directly from a browser (not using the Mac mail client). It seems to time out. These accounts were not previously using the Mac mail client.
    The accounts that previously used the Mac mail client can still successfully retrieve their Gmail via the Mac mail client, and they can still log directly into Gmail from a browser also.
    Operating system: OS X 10.6.4 (Snow Leopard)
    Program and version you use to access Gmail: Safari 5.0
    Your antivirus software (e.g. Norton 2007): None
    Any extensions, toolbars or plug-ins: None

    Hi,
    Your antivirus software (e.g. Norton 2007): None
    I hope that means you do not have Norton a/v software installed.
    For Gmail. From the Safari Menu Bar click Safari/Preferences then select the Security tab. Click: Show Cookies. Delete all Gmail related cookies. Relaunch Safari.
    If you still can't login to Gmail, open Keychain Access (Applications/Utilities). Select Passwords on the left. Delete the Gmail keychain.
    Relaunch Safari. Login to Gmail as you normally do with your user name and password. When prompted, click Yes.
    Carolyn

  • Logged out and unable to log back in

    While working on my Mac the computer suddenly logged me out and I am now unable to log back in. When I try to log back on the system logs in for 1/2 seconds before kicking me out to the initial log in page and asking again for the password. I tried shutting down and restarting and safe boot mode but nothing works.
    I am however able to log in the account I set up for my son (which is the one I am connecting from).
    Anyone knows how to log back in the master account either directly or through my son's account?
    Thanks

    Hi mazde, and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Let us know where that leaves us.
    Is it a Filevault account?

  • Firefighter unable to log in

    Hi Guys,
    WE are on GRC 5.3 SP 6
    when I try to execute FF transaction i got message saying " Destination TMSSUP VA8.DOMAIN_GRC is not defined as trusted RFC"  After creating a trusted RFC with above name I was able to execute
    Firefighter transaction but still I was unable to log into the system using FF id.
    Anybody has any guess
    Parveen

    Hi Parveen,
    Please let me know when you execute /n/virsa/vfat tcode what do you see?
    Are you able to see the below buttons?
    Owner,Firefighter,Controllers,Security,Reason Code,Configuration,Critical Tcodes
    If you can see the above buttons then configure those with appropriate data.
    First of all fill up the Configuration tab like this-
    Retrieve Change Log     YES
    Critical Transaction Table from Compliance Calibrator(VRAT)     NO
    Firefighter Owner Additional Authorization     YES
    Configuration Change Comment Mandatory     YES
    Firefighter Controller Additional Authorization     YES
    Send Log Report with Critical Transactions Only     YES
    Send Log Report Execution Notification Immediately     YES
    Send Log Report Execution Notification     YES
    Send Firefighter Login Notification Immediately     YES
    Assign FF Roles Instead of FF IDs     NO
    Send FirefightId Login Notification     YES
    Remote Function Call     FF_RFC (This is the RFC name which is created for it's own system)
    Connector Id for Risk Analysis     SID of the system
    Then you can configure Other buttons by refering SAP documentation.
    Else let me know for any help.
    Thanks,
    Sudip.

  • Can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

    can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

    I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

    You don't need to upgrade your software.  But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
    If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3.  It's easy to use in DW CS4, 5, 6 or CC.  More importantly, it's bullet proof and works in all devices. 
    Pop-Menu  Magic3 by PVII (commercial DW extension)
    http://www.projectseven.com/products/menusystems/pmm3/index.htm
    If you don't have a budget to work with, you can roll your own menus with jQuery plugins.  A bit more effort on your part, but they perform better than Spry.
    jQuery Superfish
    http://users.tpg.com.au/j_birch/plugins/superfish/
    jQuery MegaMenu2
    DEMO:
    http://www.geektantra.com/projects/jquery-megamenu-2/
    DOWNLOAD:
    http://code.google.com/p/jquery-megamenu/
    Nancy O.

  • Unable to log in to the user account [username] at this time

    My Powerbook G4 is running Mac OS X 10.4.11
    Processor: 1.5 GHz PowerPC G4
    Memory: 768 MB DDR SDRAM
    Startup Disk Macintosh HD
    Serial # 4H511OAJRJ5
    Capacity 74.4 GB
    Available: 2.3 GB
    My problems began when I had a warning message that read something like, “your startup disk is getting full. Delete some files”
    Around the same time my battery was showing signs of being spent (wouldn’t take a full charge) and would shutdown my powerbook in the middle of operation. I replaced the battery within 12 hours, rebooted, and everything seemed normal; I could log in and access all programs, files, photos, music, etc. The error message reappeared to deletes some files. I ran TechTool Deluxes and it suggested repairing my Volume Directory. There were a few suggestions in green and one in red. I accepted the ones in green and made the changes. It reopened TechTool and ran again, this time everything showed up as a “red” (drastic) directory change. I did not accept. I shut down. I rebooted, and that is when my heart sank.
    My account log in screen appeared (I have my master account and a “test” account available) and I entered my log in password. After several moments, the message “You are unable to log in to the user account [username] at this time.” I can log in to my “test” account but I have not been able to access any of my files from that account. Also, my Test account appears to be running Panther instead of Tiger; could that be? Anyway, I read some similar problem posts here and was hopeful that DiskWarrior could help restore me. I purchased and ran it successfully (at least DiskWarrior said it was a success) but I still have the same results.
    I tried to access both my caches folder and my Desktop folder from my “test” account, but these are the error messages I received:
    The folder “Caches” could not be opened because you do not have sufficient access privileges.
    The folder “Desktop” could not be opened because you do not have sufficient access privileges.
    I was shocked to see my Available space was only 2.5 GB. I don’t know how that can be right.
    I’m open to anything to retrieve my files – Any suggestions?

    Around the same time my battery was showing signs of being spent (wouldn’t take a full charge) and would shutdown my powerbook in the middle of operation. I replaced the battery within 12 hours, rebooted, and everything seemed normal; I could log in and access all programs, files, photos, music, etc. The error message reappeared to deletes some files.
    You need to delete some file not try to repair the disk volume. but anyway...
    I ran TechTool Deluxes and it suggested repairing my Volume Directory. There were a few suggestions in green and one in red. I accepted the ones in green and made the changes. It reopened TechTool and ran again, this time everything showed up as a “red” (drastic) directory change. I did not accept. I shut down. I rebooted, and that is when my heart sank.
    You need to develop a full backup plan. Get an external hd and backup to it.
    My account log in screen appeared (I have my master account and a “test” account available) and I entered my log in password. After several moments, the message “You are unable to log in to the user account [username] at this time.”
    Would you be using filevault? Which would mean you need more space.
    I can log in to my “test” account but I have not been able to access any of my files from that account. Also, my Test account appears to be running Panther instead of Tiger; could that be?
    Doubtful. What does apple > about this mac say?
    Anyway, I read some similar problem posts here and was hopeful that DiskWarrior could help restore me. I purchased and ran it successfully (at least DiskWarrior said it was a success) but I still have the same results.
    I tried to access both my caches folder and my Desktop folder from my “test” account, but these are the error messages I received:
    The folder “Caches” could not be opened because you do not have sufficient access privileges.
    The folder “Desktop” could not be opened because you do not have sufficient access privileges.
    Which desktop folder? these are normal messages.
    I was shocked to see my Available space was only 2.5 GB. I don’t know how that can be right.
    Why?
    I’m open to anything to retrieve my files – Any suggestions?
    I buy an external disk with both fireware & usb and use carbon copy cloner to duplicate you hd.
    run batcmd from an admin account to let you change permissions.
    From an administrator account enable root & be careful. This will let you look at any file on the system & delete everything!!!
    Get a new admin id.
    "BatChmod is a Cocoa utility for manipulating file and folder privileges in Mac OS X. It allows the manipulation of ownership as well as the privileges associated to the Owner, Group or others."
    http://www.macchampion.com/arbysoft/Welcome.html
    As an aside, I just noticed that the button to "apply to all enclosed items' is greyed out. I started checking other folders and best I can tell, all folders on my startup volume will not allow me to apply any permission changes to all enclosed items. Think this might have something to do with the alias issue?
    I noticed that my "apply to all enclosed items' button is greyed out too. I use BatChmod fps instead.
    Get the Mac to set up an additional administrative account. You can then change the password on your old account.
    Start with your computer power off. Hold down command-s. Power on your computer.
    Type in the following:
    The first two commands will depend on your release of Mac OS X. Look at what is typed out in the console to determine the exact format.
    # Type the follow two instructions to access the startup disk in read/write. Press return after each command.
    /sbin/fsck -fy
    /sbin/mount -uw /
    cd /var/db
    pwd
    #List all files. The l is a lower case L.
    ls -a
    #The move command acts as a rename command in this format.
    mv -i .applesetupdone .applesetupdone.old
    reboot
    Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
    Limnos adds detailed explainations:
    http://discussions.apple.com/message.jspa?messageID=8441597#8441597
    The above the idea came from a post by JoseAranda at September 9, 2006 3:48 AM
    http://www.askdavetaylor.com/howdo_i_reset_my_mac_os_x_admin_rootpassword.html
    You will need to scroll down to see this post. Search for applesetupdone
    Or see:
    http://superpixel.ch/articles/running-setup-assistant-again/
    Once you have a new administrative account, you can change the password of your old administrative account
    blue apple > System Preferences > Accounts

  • Unable to "Log and Capture" with Canopus

    Hello all -
    Recently bought a Canopus ADVC700.
    Connected it to my Apple G4, running FCP HD 4.5 and to my Sony DSR20 VTR.
    Audio and video can be caputred using the "Capture Now" method, but I'm unable to log shots and then capture.
    Tried several work-araounds, using "Easy Setup" and "Capture Settings", but I have zero control on the Sony deck.
    What am I doing wrong?
    I've contacted Canopus and awaiting a reply...also checked their website to see if I needed a driver (which there appairently isn't one).
    Thanks!

    I kinda think you've configured this all wrong and Canopus is now part of Thomson/Grass Valley so I'm not at all surprised that the support on this product is a little, umm, lacking.
    I would try this to start and then start on other variations if it don't work.
    DSR20 - Firewire - ADVC700
    DSR20 - RS422 Dsub cable - ADVC700
    ADVC700 - Firewire - Apple G4
    FCP's capture/control configs should be set to firewire, logically.
    DSR20 control menu should be set to rs422
    ADVC700 should be set to rs422 control
    Thinking through what you have going on this sounds logical to me.
    I don't understand why you're using S-video between the DSR20 and the ADVC700. You're undergoing a conversion of DV25 to analog if you use S-Video as well as the bnc composite spigot and then converting back to DV25 in the 700.
    Do you need a frame sync or just RS422 control?
    Is there any reason you can't use a [Keyspan 28X|http://www.keyspan.com/products/usa28xg> with an [Addenda|http://www.addenda-elect.com/product.htm] Mac to RS422 cable? I used this set up for a long time on my G4 and it worked great with my JVC vtr.

  • Unable to log in

    My enviroment is ERP6.0/Oracle 10.2.0.2/Solaris 10
    I just done a system copy which concluded without errors
    however I'm unable to log into one client. The message name or password is incorrect (repeat logon) results. I can succesfull loginto other clients.
    Kindly assist
    Andale

    Message is Clear
    name or password is incorrect (repeat logon)
    You can activate emergency User SAP* .
    Regards,

  • Unable to log in to the user account (name) at this time

    I get this error message when I try to log-in in my main admin account. And this is not a lost password issue I know im typing the write password because when I type a wrong one the box shakes when I type the right one it gives me that message.
    I tried alot of stuff to gain access to it but I cannot, the only thing that I can do is go in as root user and extract the files that I had in there, but I have no physcial access to the login it self, I started making a different account name for it but I dont want to lose all my prefrenses although I think the only thing that is making it this way is File Vault (its swtiched on for the locked out account)
    Any thoughts?

    I'm also getting the dreaded "You are unable to log in to the user account __ at this time" but believe this happened when I inadvertently tuned off an external hard drive without ejecting it first. At first, I thought it was a File Vault problem, but my user.sparseimage file is still there and accessible once I changed the permissions to those of another user account.
    What I have come to believe, based on other postings I have read on this topic, at least in my case, is that I must have corrupted the logged in user on the netinfo file. The solutions I've seen so far for fixing the netinfo file seem pretty complicated, though I do have a backup of that file.
    I have yet to decide whether the netinfo problem is easily fixable or if I would better employ my time moving my iTunes and iPhoto files off that sparse image and into another user account. I'm open to suggestions.
    Bill
    iBook G-4   Mac OS X (10.4.7)   1.33 GHz, 768 MB memory, 60 GB HD, iPod Shuffle

  • Unable to Log In to ES Workplace

    Hello,
    I am unable to log on to ES Workplace [HU2 SAP ERP 6.0 (ECC 6.00 EhP4)]. I recieve the message  "Password Login no longer possible - too many failed attempts", other systems are OK. I have tried to re-register as per the trips and tricks, but it does not correct the issue on the ERP system.
    Please Help.
    Thanks,
    J

    Hi Raj,
    It sounds like your access is expired. Have you tried re-registering?
    Best Regards, Trevor

Maybe you are looking for

  • How do I Force a playlist play order?

    I want to make a playlist to play in a particular order, so I can burn a CD for playback with that same order. I don't see a way to change the order in the BURN list, so is there way to change the playlist play order? I don't want to force it by chan

  • Best practice for running multiple instances?

    Hi! I have a MMPRPG interface that currently uses shared objects to store several pages of information per account.  A lot of users have several accounts (some as many as 50 or more) and may access only one or several different game servers..  I am b

  • How do you send contacts from iphone 3gs (ios 5.0.1) via bluetooth to my car?

    My JVC KW-NT30HD is capable of importing my contacts, and in fact has a set procedure. When I get to the step that involves the phone it says see phone instructions. Other than marking share contacts under blue tooth, is there a way to push it to the

  • Photo Booth background problem

    On my Mac when I go on Photo Booth all the effects work apart from the backgrounds with the roller coaster and the fish ext. It just loads the background then dosent put me in it   I have a logitech c270 webcam.

  • How do you save videos from iPhoto to a USB flash drive?

    Hello! Could someone please help me? I am trying to save vidoes from iPhoto to a USB flash drive. After I export them, I open my flash drive to play them back and they are all zero seconds long in Quick Time Player. What am I doing wrong?