Unable to log in to newly create client copy

I 'm attempting to create a new client from a newly installed ECC 6.0 IDES system. I go into SCC4 and create a new lient '200' and log off.
I try to log in to client 200 using sap* and pass and get wrong username or password error.
I can see the client listed in scc4, but can't log into it.
Any ideas?
Bob

Hello,
Having the previous question answered helped alot, but I do have another question:
Can I put the client copy on a different drive than the original?
I have SAP installed on the E: drive and would like to place the new copy client on the F: drive, can I do that?
Bob

Similar Messages

Problem in logging in to newly created client in IDES mySAPERP ECC 6.0

Hi,
I have installed IDES mySAP ERP 2005 ECC6.0 and using client 800.I want to make a copy of the client 800.I created a new client 910 using SCC4.When I try to login to 910 using SAP* and password PASS (I tried both upper case and lower case) it does not allow. I also tried user SAP* with master password, 06071992, 19920706 and also the userid: idadmin and password: ides123 .But nothing worked. So I cannot proceed further in copying the client from 800 thro' SCCL. Can any one pls let me know what is the login ID and password that I need to use to get into the newly craeted client 910?
Thanks in advance,
V. Revathy

HI dear,
before logging into newly created cllient 910 you have to change the activate the kernal user SAP*
a) Set the profile parameter login/no_automatic_user_sapstar to 0.
b) Restart the application server.
c) Log on to the new client with kernel user SAP* and password PASS.
now do client copy. after finishing client copy again deactivate the kernel user SAP*
a) Reset login/no_automatic_user_sapstar to 1.
b) Restart the application server.
regards
abuzar

How to login with ddic in newly created client

dear all,
I am using SAP NETWEAVER 7.0 EHP1. I have created a client 400 in production and i want to login with ddic but i dont understand what will be the password for that.As for sap* is pass and for ddic=? . I also use 19920706 for ddic but still it is not allowing to log on.please tell me is it possible to log on with ddic in newly created client. and sap* is working but not ddic.
thanks

Dear Abhishek,
Before you proceed to Create Jobs & Positions first you check whether the Personnel Actions (PA40) is configured or not. Then after uploading the employeee master data you can proceed to other process.
if PA40 is not configured then Configure in SPRO using PA/PM/Customizing procudures/ Infotype Menus etc. You can also maintain user profile using Tcode. SU3.
All the best.
Rgds,
Vikrant

Default username and password for newly created client in minisap

Hi all,
I am using the free SAP minisap provided by SAP. In this system i tried to create a user from tcode scc4 . when i try to login to the new client with the username SAP* and password minisap i am not able to login. What will be the default username and password for the newly created client in minisap.

In the new installation
The parameter
login/no_automatic_user_sapstar is set to " 1"
You create the parameter with value "0" & restart application server.
& Try to login into New client as SAP* with password "pass" - ( For a Standard System) - I don't what will be the default password in minisap.
Rgds
PR

Can I use Solution Builder on newly created Client?

Dear Experts,
I have an existing SAP system and I created new client via SCC4 without doing any client copy (means it's blank).
Can I logon to the newly created client via SAP* (since there's no other user id) and run Solution Builder to activate those SAP best practices Building Block? Will that affect other existing client (what I mean, will there be a cross-client customizing?
regards,
Abraham

Hi Abraham,
Can I logon to the newly created client via SAP* (since there's no other user id) and run Solution Builder to activate those SAP best practices Building Block? Will that affect other existing client (what I mean, will there be a cross-client customizing?
Yes, You can login to newly created client via SAP*. However, running or activation on empty client is not advisable.
Please copy the Newly created client from 000 or 001 and start the activation.
Refer to below link for SAP best practices Activation.
http://help.sap.com/saap/sap_bp/HCM_ERP605_US/html/installation_page_EN_US.htm
IMPLEMENT - Solution Builder Simplified path to activate SAP Best Practices.
Graphical scenario selection; Standard scope templates
http://help.sap.com/bp_dm603/BBlibrary/General/SAP_Best_Practices_overview_EN.ppt
Regards,
Sravanthi

Unable to login to IDES system after client copy

Hi guys
the IDES system which i was using was working fine. I was trying CLient copy today morning and was trying to create a new client in the IDES system.
The client copy failed due to a shortdump in the process.
Now i am unable to login to the client 800 as it says the user password is incorrect.
How do i get back my 800 client? is there a way to get back the client 800 or do i have any other optionn to re-set the password without logging on to the client?
i do have access to client 000.
please guide me what should i do? i need the client 800 back and should be able to login too.

hi,
i cannot login to client 800. I need to login first in the client 800 to go to su01 to re-set the password.
I want to login to client 800 which i am unable to do as a result of client copy. So the other option i am looking at is reset the password from client 000.
anyways thanks for your inputs
Hi guys,
any idea?
Edited by: Workflow learner on Jun 2, 2008 10:48 AM

How i can create client copy

how i can create client copy .
pls tell me step by step procedure to create client.
and client copy.

For client copy login to source client with t-code scc4 and create the new client. Provide the details for new clients.
Create the new logical client for new client.
check for the the profile parameter
login/no_automatic_user_sapstar = 0
login to destination client with sap* and p/w as pass.
run t-code sccl for local client copy with sap_all.
Kindly provide the points if issue solve.
Regards,
Rohit mehta

Create client copy

Hi all,
How to create client copy within system? Can you help me??
Thanks

Shahril,
Please follow the below instructions
1. Go to the transaction SCCL, Select the source client as 001, a target client (e.g 100)
2. The client copy does not take care sxmb_adm configuration, connection objects and exchange profile. These steps have to be performed manually.
a) Logon to the old client, and run sxmb_adm. Deregister the queues and set the role of the business system to " not yet configured".
b)Logon on to the new client register the queues and set the Business system to "Integration Server".
c) Register all Queues
d)Changes to Connections
3)
ABAP Stack
In the ABAP stack execute the transaction SM59 and locate the HTTP connection - INTEGRATION_DIRECTORY_HMI
Change the Client from 001 to 100 (as mentioned in the example)
4) Java Stack
There are a couple of places to change the logon client in the JAVA stack
1) In the Java stack -
Logon to the NW administrator and go to the Destinations
Configuration Management -> Security -> Destinations
Change the client in
a) I18NBackendConnection
b) I18NBackendConnection
f) The JCo RFC destination
The client has to changed for the four connection objects show below.
5)
Exchange Profile :
The Exchange profile defaults to the client 001 if a client copy is not performed. Go ahead and change the client for the following entries -
com.sap.aii.connect.integrationserver.r3.client
com.sap.aii.connect.rwb.r3.client
com.sap.aii.ib.server.connect.webas.r3.client
com.sap.aii.rwb.server.centralmonitoring.r3.client
The Final Step -
Change your client in your SLD business system. I found that it is better to delete the existing BS and create a new one with the same name.
Restart the system and you are ready to operate from your new system
Let me know if any issues.
Thanks
Sekhar

Can't log in with newly created user on new install of Arch [solved]

Hi all,
Yesterday I installed Arch anew (because I had a hardware failure that took out my hard drive), but now I'm encountering an issue with logging in.
After following the installation guide, and creating a new user, I find that I'm unable to log in as said user.
It complains about wrong password, but it's the exact same password that I entered mere moments before that, when creating the new user.
I can "log in" as said user by first logging in as root (which does work) and doing "su - <username>" (though then it doesn't ask for a password).
Can someone point me in the right direction to fix this problem?
Last edited by madjo (2013-07-03 20:19:43)

I think cfr meant to say you shouldn't "fix" bash path - as some users did. Unfortunately there's a bit confusion wrt which paths should be used - see this ML thread.
Some say we should keep /bin/foo for compatibility, others say that we should boldly move to /usr/bin/foo.

Unable to move mailbox to newly created database in exchange 2013

Hi, i created a new database in our existing exchange server 2013 sp1 and i was trying to move my mailbox to the newly created one using the EAC. But the mailbox is not getting moved and i am not receiving any errors. Is there anything else i need to do
after creating the database.
Please advise.

Hello
lets play again:
new-moverequest -identity useremailaddress -targetdatabase new database
after two minute get move req log
get-moverequest -identity useremailaddress |get-moverequeststatistics -includereport |fl
or if have got more DC specified one Dc with -domincontroller DCname
sorry my english

Cannot Create Client Copy

Hi All;
I am setting up CRM on AIX with DB2, and am in the process of creating my Client 300. I was able to create the client in scc4, logged out of the system and then logged into the new 300 client with SAP*. When I tried using the SCCL to copy from 001 to 300 I get the following error
"A client copy run is currently active" If I click on the check mark, it takes me back to the main screen. If I try to display the client information with SCC4, and select edit, I get
"System error: Unable to lock table/view T000" Message no SV050
A system error occurred in lock administration. The data could not be
locked as requested.
Not finding much help with googling the error, so I am at a loss for now.
Any suggestions would be appreciated.

Dear Les,
I am facing the same error. Could you please pass the solution you have received?
I would appreciate it.
Latest Update:
Ask yourself the following questions:
1. Did you modify any profile parameter before starting client copy?
2. Check whether sappfpar pf=<Instance Profile> check at OS level, this should give you if shared memory is sufficient or not.
3. Are you able to Launch RZ10?
4. Are you seeing errors in SM21 similar to
9:28:52 DIA 002 000 SAPSYS                GE F Error setting up the lock table
9:28:52 DIA 002 000 SAPSYS                GZ Z > Initialization of Shared Memory enxxmini584#
9:28:52 DIA 002 000 SAPSYS                GZ Z > ShmCreate(34, 20480000, SHM_CREATE, ..) rtc=1 enxxmini586#
9:28:52 DIA 002 000 SAPSYS                GE I Enqueue: Initialization error
9:28:52 DIA 002 000 SAPSYS                GE F Error setting up the lock table
9:28:52 DIA 002 000 SAPSYS                GZ Z > Initialization of Shared Memory enxxmini584#
9:28:52 DIA 002 000 SAPSYS                GZ Z > ShmCreate(34, 20480000, SHM_CREATE, ..) rtc=1 enxxmini586#
9:28:52 DIA 002 000 SAPSYS                GE I Enqueue: Initialization error
9:28:52 DIA 002 000 SAPSYS                GI 0 Error calling the central lock handler
9:28:52 DIA 002 000 SAPSYS                GI 4 > Dequeue All call failed
9:28:52 DIA 002 000 SAPSYS                GE F Error setting up the lock table
9:28:52 DIA 002 000 SAPSYS                GZ Z > Initialization of Shared Memory enxxmini584#
9:28:52 DIA 002 000 SAPSYS                GZ Z > ShmCreate(34, 20480000, SHM_CREATE, ..) rtc=1 enxxmini586#
9:28:52 DIA 002 000 SAPSYS                GE I Enqueue: Initialization error
9:28:52 DIA 002 000 SAPSYS                GI 0 Error calling the central lock handler
9:28:52 DIA 002 000 SAPSYS                GI 4 > Dequeue All call failed
9:29:18 S-A      000 zdcadm                E0 2 Program rslgsend Ended: o.k., SIGINT
I would suggest you taking a good look at the profile parameters changed or go back to your working Instance profile. This should resolve the issue.
Regards,
Ramanathan EKAMBARAM
Edited by: Ekambaram Ramanathan on May 28, 2009 4:49 AM

Unable to log in to portal after system copy

Good day
I have copied my production portal system to a test system. I am using an ECC Abap system as my user store. The portal start successfully and I am able to access the Visual administrator.
I am however unable to log on to the portal. The error I get is "User authentication error".
Below is an extract from the security log:
#1.5#0011259C05FB0054000002F500001B9800043F56F6157AED#1195542635224#/System/Security/Authentication#sap.com/irj#com.sap.engine.services.security.authentication.logincontext#Guest#0##sapsep.sap.lonmin_SEP_32623050#Guest#af93b280973711dc980a0011259c05fb#SAPEngine_Application_Thread[impl:3]_35##0#0#Error#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.FAILED
User: N/A
Authentication Stack: ticket
Login Module                                                            Flag        Initialize Login      Commit     Abort      Details
com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false      false      true
com.sap.security.core.server.jaas.CreateTicketLoginModule               SUFFICIENT ok          false      false      true
com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          true       true       true
com.sap.security.core.server.jaas.CreateTicketLoginModule               REQUISITE   ok          true       exception true       null#
#1.5#0011259C05FB0054000002F700001B9800043F56F61580BC#1195542635240#/System/Security/Audit#sap.com/irj#com.sap.security.core.util.SecurityAudit#Guest#0##sapsep.sap.lonmin_SEP_32623050#Guest#af93b280973711dc980a0011259c05fb#SAPEngine_Application_Thread[impl:3]_35##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest     | LOGIN.ERROR     | null     |      | Login Method=[default], UserID=[oostw], IP Address=[172.27.2.137], Reason=[Access Denied.]#
Please can someone assist.
Thanks
Wilhelm

Hello!
It looks like your system is configured for ticket authentication. As you did a system copy the SSO-ticket might not be working anymore. If this is the case you need fix the SSO or you need to re-configure your Portal (at least temporarily) to allow other authentication methods (like basic password authentication).
You can configure the order of the authentication methods in VisualAdmin and set the 'levels' (Required/Sufficient/etc.) there as well.
Hope this helps,
Jörg

Create Client copy only with Master data

hi friends,
we are going for SAP Re-Implementation.
we want client copy only with master data without having transactional data
Is it possible to copy the master data from production to production.
can we transfer the data using ALE/I DOCS...?
Is there is any standard BAPI to transfer data across client....?
if there is any solution please give me guidance.
i have searched in SDN and SAP technical but i can't find the proper solution.
Thanks in advance.
regards,
karunakar

Hi Karunakar,
1) Make a client copy ready 2) Use Idoc and moved the master data. I am not sure how much data it is.We did the same before.
Check these links form Peter.
[TDMS|http://204.154.71.138/images/whiterhino/fp/tstsym5/testdatamigrationserver.pdf]
[TDMS Wiki|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b43e2b4d-0b01-0010-c191-cba32880cb95?QuickLink=index&overridelayout=true]
Regards,
Madhu.

I can't log into a newly created Aim name for Ichat

It says you cant change account settings while youre logged in in the accounts tab area, but I am offline still and the log in box repeatedly pops up. It says my username or password is incorrect. But i just created it and know it is correct. iMessage logs in fine as well. I have search for hours, and tried many different solutions with no luck. very frustrated. thanks for any help

Make sure that you haven't saved Uppercase and Lowercase versions of that name and password.
Remove saved Password(s): Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"

Unable to send email to newly created maillist.

I created a maillist in my iPlanet Messaging Server. The list exists in my ldap and my console views. When I try to send email to the list, I get an error: "SMTP Error: 5.1.1 unknown or illegal alias: [email protected]".
It is a mail enabled list. Why can't I send to it?
Anyone else had similiar problems??

There are several edits to other files, including
imta.cnf
job_controller.cnf.
Please also note, that there is a typo in the existing imta.cnf in every install. You will need to follow the instructions given in Appendix B of the Admin Guide, in order to get Direct LDAP working properly:
http://docs.sun.com/source/816-6009-10/dirldap.htm

Unable to log in to newly create client copy

Similar Messages

Maybe you are looking for