Unable to log into administrator account after software update

I've done a clean installation of server 10.5 on a G5 Xserve using the simplified "workgroup" setting. Created a named administrator account as part of the setup. Once passed the initial setup screens I did a software update to 10.5.8. After reboot I'm locked out of the named administrator account. I can still log in as root and localadmin using the same password. However, I don't see any accounts listed under the Users tab in Server Preferences. I've done nothing to this system other than answer a few standard questions during install and then update software.
This result is repeatable as I tried simply reinstalling the server OS figuring I must have done something wrong the first time. In fact the reason I'm reinstalling in the first place is related to this problem. Something caused all my admin and user accounts to go away on the original server setup. Couldn't figure it out so I decided to do a fresh install. I realize now it was likely related to a software update.
When logged in as root and using Console I see errors like "'No LDAP Master' while processing a command of type: 'readSettings' in plug-in: 'servermgr_accounts'". I'm a newbie to the server world and I'm not sure what that means.
There should be nothing remotely fancy going on here. Simply a stand alone server getting a fixed IP from a router. A single admin account, no directory services. Before the software update everything seemed fine.
Any help would be appreciated.

Hi,
I have same issue and i have resolve so.
login as root and password
Verify if you have in /Users/xyz : your admin home folder
if yes, create a new user with : Preference System, Account, create new user
set as Administrator, give same name as your /Users/xyz home folder
then click OK, a message will appeart that the folder exist, click YES.
that's resolve my issue

Similar Messages

  • Unable to log into the portal-After Upgrade from NetWeaver 7.0 to 7.3EHP1

    Dear Experts,
    We have poltal landscape(NW 7.0 Dualstack SPS27) with our customozed themes and par files(Company name,logos and colours)
    Recently we upgraded the one of portal from NW 7.0 to NW 7.3EHP1 . Upgrade has been successfilly completed with small issue.
    After upgrade all urls are working(/nwa, /sld) except /irj/portal.We know that NW 7.3 EHp1 accepts only ear file i.e we converted the our customized log on par file to ear file through par migration tool and the same was deployed successfully through NWDS 7.3 version.After deploying we are able to access the
    /irj/portal url with our customized par(means ear file) without issues,
    We are unable to log into the portal after giving the correct user id and password,getting the portal runtime error as foloows.
    Portal runtime error
    An exception occured while processing your request.Send the exception ID your administrator
    Exception id:
    see log files for details about this exception
    Default.trc log file(/server0/log)
    #EP-PIN-PRT#tc~epbc~prtc~api#C00061FD2733006C00000005000056CB#9034950000000004#sap.com/com.sap.portal.runtime.system.hooks#com.sap.portal.prt.
    runtime#J2EE_ADMIN#4##43E00B85A79911E380F800000089DCC6#3a483a0fa79911e3903000000089dcc6#3a483a0fa79911e3903000000089dcc6#0#Thread[HTTP Worker
    [@900472845],5,Dedicated_Application_Thread]#Plain##
    08:14_09/03/14_0005_9034950
    [EXCEPTION]
    java.lang.RuntimeException: Could not create Resource Repository root folder in PCD
    at com.sap.portal.resource.repository.ResourceRepositorySrv.initRepositoryRootContext(ResourceRepositorySrv.java:140)
    at com.sap.portal.resource.repository.ResourceRepositorySrv.init(ResourceRepositorySrv.java:93)
    at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher$3.service(RequestDispatcherFactory.java:518)
    at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
    at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
    at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
    at com.sap.portal.prt.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:210)
    at com.sap.portal.prt.broker.PortalServiceItem.load(PortalServiceItem.java:578)
    at com.sap.portal.prt.om.ObjectsManager.createObejctHandle(ObjectsManager.java:234)
    at com.sap.portal.prt.om.ObjectsManager.getObjectHandle(ObjectsManager.java:147)
    at com.sap.portal.prt.broker.PortalAppBroker.getPortalService(PortalAppBroker.java:498)
    at com.sap.portal.prt.service.ServiceManager.getPortalServiceItem(ServiceManager.java:431)
    at com.sap.portal.prt.service.ServiceManager.get(ServiceManager.java:220)
    at com.sap.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:130)
    at com.sap.portal.resource.repository.WebResourceRepositorySrv.init(WebResourceRepositorySrv.java:71)
    at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher$3.service(RequestDispatcherFactory.java:518)
    at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
    at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
    at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
    at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
    at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
    at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
            at com.sap.portal.prt.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:210)
            at com.sap.portal.prt.broker.PortalServiceItem.load(PortalServiceItem.java:578)
            at com.sap.portal.prt.om.ObjectsManager.createObejctHandle(ObjectsManager.java:234)
            at com.sap.portal.prt.om.ObjectsManager.getObjectHandle(ObjectsManager.java:147)
            at com.sap.portal.prt.broker.PortalAppBroker.getPortalService(PortalAppBroker.java:498)
            at com.sap.portal.prt.service.ServiceManager.getPortalServiceItem(ServiceManager.java:431)
            at com.sap.portal.prt.service.ServiceManager.get(ServiceManager.java:220)
            at com.sap.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:130)
            at com.sap.portal.resource.repository.WebResourceImportService$ResourceImporter.<init>(WebResourceImportService.java:248)
            at com.sap.portal.resource.repository.WebResourceImportService.importApplicationResources(WebResourceImportService.java:172)
            at com.sapportals.portal.navigation.NavigationMimeRepositoryService.loadAllPicsToWRR(NavigationMimeRepositoryService.java:186)
            at com.sapportals.portal.navigation.NavigationMimeRepositoryService.init(NavigationMimeRepositoryService.java:160)
            at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher$3.service(RequestDispatcherFactory.java:518)
            at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
            at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
            at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
            at com.sap.portal.prt.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:210)
            at com.sap.portal.prt.broker.PortalServiceItem.load(PortalServiceItem.java:578)
            at com.sap.portal.prt.om.ObjectsManager.createObejctHandle(ObjectsManager.java:234)
            at com.sap.portal.prt.om.ObjectsManager.getObjectHandle(ObjectsManager.java:147)
            at com.sap.portal.prt.broker.PortalAppBroker.getPortalService(PortalAppBroker.java:498)
            at com.sap.portal.prt.service.ServiceManager.getPortalServiceItem(ServiceManager.java:431)
            at com.sap.portal.prt.service.ServiceManager.get(ServiceManager.java:220)
    at com.sap.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:130)
            at com.sap.portal.pcm.iview.admin.PcmIviewCommon.getAdditionalAttributes(PcmIviewCommon.java:358)
            at com.sap.portal.pcm.iview.admin.PcmIviewCommon.initLayers(PcmIviewCommon.java:173)
            at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:177)
            at com.sap.portal.pcm.page.admin.AdminBasePage.getCustomImplementation(AdminBasePage.java:76)
            at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:642)
            at com.sapportals.portal.navigation.LightningHelperService.getFrameworkPageAttributesValues(LightningHelperService.java:143)
            at com.sapportals.portal.navigation.LightningHelperService.getFrameworkPageAttributesValues(LightningHelperService.java:171)
            at com.sapportals.portal.navigation.fpm.util.PhaseConfiguration.prepareAttributes(PhaseConfiguration.java:71)
            at com.sapportals.portal.navigation.fpm.util.PhaseConfiguration.storeRelatedAttributesInSharedStorage(PhaseConfiguration.java:35)
            at com.sapportals.portal.navigation.fpm.NavigationFpmListener.doFrameworkPhase(NavigationFpmListener.java:535)
            at com.sapportals.portal.navigation.fpm.NavigationFpmListener.doPhase(NavigationFpmListener.java:122)
            at com.sapportals.portal.pb.fpm.FPMContainer.distributeEvent(FPMContainer.java:63)
            at com.sapportals.portal.pb.fpm.FPM.doDocumentHook(FPM.java:179)
            at com.sapportals.portal.prt.service.document.DocumentHookMulticaster.doDocumentHook(DocumentHookMulticaster.java:100)
            at com.sapportals.portal.prt.service.document.DocumentHookService.doDocumentHook(DocumentHookService.java:119)
            at com.sapportals.portal.prt.service.document.DocumentHookServiceNew.doDocumentHook(DocumentHookServiceNew.java:186)
            at com.sapportals.portal.prt.connection.PortalHook.doDocumentHook(PortalHook.java:665)
            at com.sap.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:183)
            at com.sap.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:107)
            at com.sap.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:141)
            at com.sap.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:206)
            at com.sapportals.portal.navigation.PortalLauncher.doContent(PortalLauncher.java:116)
            at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:213)
            at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:129)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
            at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
            at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
            at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
            at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
            at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
            at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
            at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
            at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
            at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
            at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
            at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
            at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
    Caused by: javax.naming.InvalidNameException: Character not allowed: ':' in 'pcd:resource_repository'
    at com.sapportals.portal.pcd.pl.PcdName.checkComponent(PcdName.java:64)
            at com.sapportals.portal.pcd.pl.PcdName.checkNameComponent(PcdName.java:39)
            at com.sapportals.portal.pcd.pl.PcdName.padd(PcdName.java:636)
            at com.sapportals.portal.pcd.pl.PcdName.add(PcdName.java:626)
            at com.sapportals.portal.pcd.gl.util.StringUtils.tokenizeIntoPcdName(StringUtils.java:112)
            at com.sapportals.portal.pcd.pl.PcdName.appendUrlInternal(PcdName.java:408)
            at com.sapportals.portal.pcd.pl.PcdName.<init>(PcdName.java:245)
            at com.sap.portal.resource.repository.ResourceRepositorySrv.initRepositoryRootContext(ResourceRepositorySrv.java:121)
            ... 132 more
    1)We are suspecting this issue is related to the theme issue.How to update the theme in the upgraded portal(have a backup of themes)
    2)Want to know if we update a theme where it stored at the operating system level(in NW 7.3 EHP1 as well as NW 7.0)
    3)Is there any post steps after portal upgrade.
    Request you suggest.
    Regards
    Maruthi

    Hi
    Refer the SAP Notes
    1942399 - Fix usage of unregistered class loader while processing HTTP request in an application being updated or stopped at the same time
    1744820 - Migration 7.3 fails while executing migration of pcd_upgrade
    1703578 - WPC migration stops during connection creation
    1918086 - ERROR: Unable to get iView
    Regards
    Ram

  • Cannot Log into AIM account after multiple tries

    This problem is a nightmare. I really do appreciate the support. Unfortunatly the fix is only temporary. Here is what is going on and what Fixes I have tried.
    The problem is on my parents G5 power PC (~2006)
    They have an AOL AIM account.
    Ichat worked great for about 4 months.
    Then the problems occurred (Can not log into AIM account after mutliple tries).
    We have tried:
    Switching to port 443 - this has not worked ever time we have tried it.
    Deleting iChat.plist, iChatAgent.plist, and iChatAIM.plist (left the other ichat plists alone like Jabber, Agent, Subnet,etc)
    This this restores ichat for about a day then back to the same problem.
    We have also tried running disk utlity and repairing permissions and get it going for day some times.
    Not sure what else is causing it to drop out and having to delete this times again and again? Any ideas?

    On the Netgear
    The Access IP is normally 192.168.0.1 and the User ID is admin and the password is password when the pop down appears.
    ----Under SYSTEM PREFERENCES>NETWORK It shows Airport Connected to "Netgear 192.168.1.3" do not see User ID or password on the screen?
    In the menu on the left the last (or near last item) is UPnP.
    Check this is Enabled.
    ----Do not see this listed anywhere
    About two thirds of the way down the menu is WAN Set up
    In hear Disable the Port Scan Line (It will read DOS (or SPI) and Port Scan)
    There is another Line about "Blocking Responses to Ping on the WAN port" this needs to be Disabled as well (IChat sends a Ping to confirm where the Visible Invite went to is where the SIP stuff (In the Log about the error) is coming back from).
    On the DNS info.
    This should be two IP address normally that are on the Internet.
    These should appear on the RCA if it is accessible in a web Browser but more likely on the Router's Set Up pages (or Some sort of Summary page).
    A 192.168.x.x address points to the Router (I would guess in this case) and whilst some routes can be DNS servers as well it is not that common and is only really useful to link a MAC (Ethernet and/or WiFi Card - Media Access Card Address) info to a Name for the Computers that are attached.
    ----Not sure where to find all this in OS 10.5.8
    ----Under System Preferences>Network with Airport highlighted I click advanced and go to TCP/IP is see two addresses the ipv4 = 192.168.1.3 and the router=192.168.1.1
    (I have presumed that there are no other DNS servers are listed and the 192.166 bit was a typo)
    ---Correct i put a typo as i was not sure if it was secure to post.
    If the Computer can do Wifi as well as Ethernet it should not have both Connected to the Router at the same time. (iChat "Sees" it as two Connections to the Internet).
    --- The computer is only connected via Airport to the netgear router.

  • 10.6.8 Unable to log into the network after update

    07-31-2011
    Server: 10.6.8
    Client 10.6.8
    Just installed the latest updates for my snow leopard server and it will not accept my network login. I have quadruple checked the credentials and then some but it appears to accept the username and pass, displays the user avatar and then the dialogue box shakes displaying the error message:
    "Logging into the account failed because an error ocurred"
    It's not a very descriptive message but I checked online for some help but couldn't find much. This issue specifically happened after the latest server updates. I know I could use time machine and fix it, I fixed it before that way, but I would like to find a resolution for this issue if there is one.
    Any help would be much appreciated.

    After contacting Apple support I was told to rebind the machine to the server which did work initially. I was able to log in with my network login but when i shut down the machine later and tried to boot up and log back in, i was presented with the same error.
    I attempted the same resolution and rebinded the machine but this time it didn't work. I tried multiple times but have had no success.

  • Can't log into User Account after disrupting external hard drive

    I keep my account (Admin) on an external hard drive due to the large volume of data. I mistakenly pulled out the USB cable to the drive while trying to resolve another issue. Subsequently, it appeared a lot of my data was missing. I restarted the computer and couldn't log into my user account. It seems pulling the USB cable to the external drive corrupted something. I verified both disks (internal & external) and all was OK. I ran Disk Permissions and tried to repair. The resultant information is attached at the bottom of this message.
    I can access my data on the hard drive from my laptop over the network. I just can't get into my user account directly. Any ideas on how I can address this issue?
    Repairing permissions for “Macintosh HD”
    Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
    Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/classlist" , should be 0, user is 95.
    Permissions differ on "Library/Frameworks/HPPml.framework", should be drwxrwxr-x , they are drwxr-xr-x .
    Permissions differ on "Library/Frameworks/HPServicesInterface.framework", should be drwxrwxr-x , they are drwxr-xr-x .
    Permissions differ on "Library/Printers/hp/Frameworks/Matterhorn.framework/Versions/DI_MH.A.05.01.001 /Resources/Info.plist", should be -rw-rw-r-- , they are -rwxrwxr-x .
    Permissions differ on "Library/Printers/hp/Frameworks/ResourceManager.framework/Versions/DI_RM.A.04.0 7.000/Resources/Info.plist", should be -rw-rw-r-- , they are -rwxrwxr-x .

    There may have been another solution to this problem but I went the route of creating another user name and migrated the data over to that name. Thank you!

  • Cannot log into iTunes account after reinstalling Vista

    I just reinstalled Vista on my friends laptop, and now it wont let me log into iTunes. It just keeps saying that the network connection is down, and to check my settings. ANyone know what the problem is?
    COuld it be related to this:
    http://discussions.apple.com/thread.jspa?threadID=1698845&tstart=0
    Stuart

    On the Netgear
    The Access IP is normally 192.168.0.1 and the User ID is admin and the password is password when the pop down appears.
    ----Under SYSTEM PREFERENCES>NETWORK It shows Airport Connected to "Netgear 192.168.1.3" do not see User ID or password on the screen?
    In the menu on the left the last (or near last item) is UPnP.
    Check this is Enabled.
    ----Do not see this listed anywhere
    About two thirds of the way down the menu is WAN Set up
    In hear Disable the Port Scan Line (It will read DOS (or SPI) and Port Scan)
    There is another Line about "Blocking Responses to Ping on the WAN port" this needs to be Disabled as well (IChat sends a Ping to confirm where the Visible Invite went to is where the SIP stuff (In the Log about the error) is coming back from).
    On the DNS info.
    This should be two IP address normally that are on the Internet.
    These should appear on the RCA if it is accessible in a web Browser but more likely on the Router's Set Up pages (or Some sort of Summary page).
    A 192.168.x.x address points to the Router (I would guess in this case) and whilst some routes can be DNS servers as well it is not that common and is only really useful to link a MAC (Ethernet and/or WiFi Card - Media Access Card Address) info to a Name for the Computers that are attached.
    ----Not sure where to find all this in OS 10.5.8
    ----Under System Preferences>Network with Airport highlighted I click advanced and go to TCP/IP is see two addresses the ipv4 = 192.168.1.3 and the router=192.168.1.1
    (I have presumed that there are no other DNS servers are listed and the 192.166 bit was a typo)
    ---Correct i put a typo as i was not sure if it was secure to post.
    If the Computer can do Wifi as well as Ethernet it should not have both Connected to the Router at the same time. (iChat "Sees" it as two Connections to the Internet).
    --- The computer is only connected via Airport to the netgear router.

  • Unable to log into itunes store (0x80092013) and update problems

    I am having problems logging into the itunes store using itunes 10.6.0.40 in Wndows 7 in the uk  which results in the error message shown below:
    'We could not complete your itunes store request.  An unknown error occurred (0x80092013).  There was an error in the itunes store please try again later"
    However, I am able to browse the itunes store without any problems (this does not require logging in).
    In addition selecting the menu item Help > Check for updates in itunes results in the message "The itunes server could not be contacted.  Please check your internet connection or try again later'
    I also have two ipods and an ipad and clicking on the <Check For Update> button on each of them within itunes results in the error message "The ipod update server could not be contacted.  Make sure your network settings are correct and your network connectivity is active or try again later". 
    In trying to fix the above problems I have tried the following:
    Re-installed itunes
    Ran ipconfig /flushdns
    Changed my dns entries to use dynamic dns entries and also tried googles settings (8.8.8.8 and 8.8.4.4)
    Put entries in the hosts file for gs.apple.com etc
    Reset the winsock using the command netsh winsock reset
    Turned Norton smart firewall off completely
    Ensured interent settings were set to 'Check for server certificate revocation' was unticked and "SSL 3.0" and "TLS 1.0." were both ticked
    General internet connectivity is working fine it is just itunes where the problems are.
    I can also log onto the itunes store from the ipad itself without a problem.
    I also have a Windows Vista laptop which can connect to the itunes store without a problem and can also run the menu item Help > Check for updates and results in a message saying itunes is the latest version.  This also runs Norton Smart Firewall and is having no problems.  So I am assuming from this that my setup is not at fault and it is not an isp issue.
    I have also noticed that a number of other people are reporting problems logging into the itunes store and also error 0x80092013.
    The results of an itunes diagnostic test (Help > Run Diagnostics) are shown below (this shows that the itunes store can be browsed but attempts at prurchasing etc cannot be completed)
      Microsoft Windows 7 Ultimate Edition Service Pack 1 (Build 7601)
    System manufacturer System Product Name
    iTunes 10.6.0.40
    QuickTime 7.7.1
    FairPlay 1.14.34
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.1.1.4
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0012AF0402B0FA18
    Current user is an administrator.
    The current local date and time is 2012-03-11 18:01:37.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Advanced Micro Devices, Inc., ATI Radeon HD 4870
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.6.0.40 is currently running.
    iTunesHelper 10.6.0.40 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name: {46932D17-49B1-4170-9CA8-EA1A00438097}
    Description: Microsoft Loopback Adapter
    IP Address: 169.254.183.23
    Subnet Mask: 255.255.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server: 0.0.0.0
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers:
    Adapter Name: {58D508FD-AACB-4B61-B19B-D91F9FD1F400}
    Description: Bluetooth Device (Personal Area Network) #2
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers:
    Adapter Name: {4C3DB141-4DA2-4484-A598-E5B7ACD6E684}
    Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller(NDIS6.20)
    IP Address: 192.168.1.2
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Sun Mar 11 17:05:46 2012
    Lease Expires: Sun Mar 11 17:05:45 2012
    DNS Servers: 192.168.1.1
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was unsuccessful.
    An unknown error occurred (0x80092013).
    Connection attempt to iPhone activation server was unsuccessful.
    An unknown error occurred (0x80092013).
    Connection attempt to firmware update server was unsuccessful.
    An unknown error occurred (0x80092013).
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-03-11 17:58:25.

    I have spoken directly with Apple over the last couple of hours.  They are aware of the problem and are going to ask their engineering department to investigate.  It is perhaps not a big priority at the moment as they say they only have 30 confirmed reports of the issue worldwide.
    Is it possible that there are other people who are having the same problem and are watching the forums waiting for answers?  If so, please report the problem.  This is the only way for Apple to understand the scale of the problem (if indeed it is a big problem) and to be able to escalate the issue and allocate suitable resources.  The issue we are seeing is:
    I mentioned what you said about downgrading - I have also contemplated this but I am expecting I will need to run 10.6 for HD media and syncing with the new iPad.  Apple agree downgrading is not an acceptable solution, and there must be a way forward, but if you dont need 10.6 then why not downgrade until the problems are resolved.
    My take on the problem is this:
    The error code is the same as a Windows error code that suggests the issue is with accessing the certificate revovation lists (CRL).  iTunes 10.6 is a signed application that needs to access a CRL to determine whether its certificate is still active.   iTunes own diagnostic tool points in the same direction too.  The network connectivity test (see image below) shows the network interface and internet connection are fine.  It is just the secure link that is failing.  It is possible to view the apple store, and download podcasts etc.. but it is not possible to sign into an account or make purchases.
    One person has replied to many of these postings suggesting the problem can be fixed by updating DNS settings, which could add weight to this theory.  The person who posted this didnt explain why this worked for them, but if DNS settings have not propogated fully for a new CRL this could be causing problems for some users.  If so this could just fix itself in the coming days, or it may work if you can connect to the internet from a different connection like a public wifi hotspot.
    I will post updates if I get anywhere or hear anything back from Apple.

  • Unable to connect to wireless network after software update

    on updating the software on my Ipad 3 I am unable to connect to my office wireless network

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Any new user creation gets: unable to log into user account error

    Sort of reposting from http://discussions.apple.com/thread.jspa?threadID=2795507&tstart=0 as that initial question was answered.
    Anyway, running an xserve managing all network accounts (only local accounts are a local admin on each system). DNS checks out and all current users can log in fine. However, it seems any new user I create keeps getting this wonderfully ambiguous error. I've tried Guest (but figured it probably interfered with the Guest Account), Student (but thought it might be interfering with a group of the same name), Guest Student, and Temp User.

    Just making sure, you have selected the home location, and then actually pressed the "Create home" button? I have missed it few times and then wondered why it is not working. Then check the home folder location that it is actually there and created successfully.
    Yeah, and then hit Save!
    Message was edited by: VincensoXFIN

  • Some accounts on iMac unable to log into Gmail (OS X 10.6.4, Safari 5.0)

    I have 5 accounts configured on my Intel iMac.
    After upgrading to Snow Leopard (OS X 10.6.4), some of the accounts are unable to log into Gmail directly from a browser (not using the Mac mail client). It seems to time out. These accounts were not previously using the Mac mail client.
    The accounts that previously used the Mac mail client can still successfully retrieve their Gmail via the Mac mail client, and they can still log directly into Gmail from a browser also.
    Operating system: OS X 10.6.4 (Snow Leopard)
    Program and version you use to access Gmail: Safari 5.0
    Your antivirus software (e.g. Norton 2007): None
    Any extensions, toolbars or plug-ins: None

    Hi,
    Your antivirus software (e.g. Norton 2007): None
    I hope that means you do not have Norton a/v software installed.
    For Gmail. From the Safari Menu Bar click Safari/Preferences then select the Security tab. Click: Show Cookies. Delete all Gmail related cookies. Relaunch Safari.
    If you still can't login to Gmail, open Keychain Access (Applications/Utilities). Select Passwords on the left. Delete the Gmail keychain.
    Relaunch Safari. Login to Gmail as you normally do with your user name and password. When prompted, click Yes.
    Carolyn

  • Even though I am logged into the apple website with my apple id, I am unable to log into the App Store.  It's the same account.

    Even though I am logged into the apple website with my apple id, I am unable to log into the App Store.  It's the same account.

    Back up all data.
    Step 1
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    Log out, log back in, and test. If there's no improvement, continue.
    Step 2
    Reset your computer’s PRAM.

  • I am trying to use Photoshop 10. After my catalog loads. I am told to log into my account. My user name is correct and I use a new password. That password lets me log in to my Adobe account and even allowed me to loadp

    I am trying to use Photoshop 10. After my catalog loads. I am told to log into my account. My user name is correct and I use a new password. That password lets me log in to my Adobe account and even allowed me to load a 30 day trial of PS14i After I enter  the password I am never allowed to go any further, What do I need to do to get into my catalog?

    I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
    DionM_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • 1st-I was able to log into my account but was not able to open any applications, tried another account and same thing.  was able to log out and restart but now am unable to use mouse.  g5 dual core

    1st-I was able to log into my account but was not able to open any applications, tried another account and same thing.  was able to log out and restart but now am unable to use mouse.  g5 dual core, can't remember the os without seeing it.

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Let us know how far you get, or results.

  • I have been trying to get the full version of lightroom after using a trial version but it says something about "GB" ? And i need to log into different account or set up a new one? Please help?

    I have been trying to get the full version of lightroom after using a trial version but it says something about "GB" ? And i need to log into different account or set up a new one? Please help?

    I would love to give you more information but i cannot access that page again? i can add Lightroom to my cart but when i go into my cart it says there is nothing in there? I have a red bubble above "my cart" with a number 4 in it to show there is something there but there is not? It just wont let me buy anything?

  • I cannot log into user account with old password after using migration assistant.

    I used Migration Assistant to move only my Settings and Users from my Power PC (User name RLE 5) to my Mac Pro.  Because of what I have read in these forums I did not migrate applications or and files/folders. I will do that manually.  After migrating I tried logging in to my user account RLE 5 on my Mac Pro, but it is telling me I am using the wrong password.  I used the same password I used on my Power PC, but with no luck.  On my Mac Pro I went into System Preferences>Accounts>RLE 5 account and changed the password.  I then rebooted and tried again.  No luck.
    Can somebody help me with this problem?
    Thank you.

    What you propose would not solve the problem I am having.  I must not have been clear about it.  So I will elaborate. 
    I have a Power PC with 10.5.8.  The admin user account name is RLE 5.  I need a password to log into my root user account on my Power PC. 
    Then I bought a used Mac Pro with a clean install of 10.7.5 and no password set up yet for my admin user account.  The admin user account name is Mac Pro.  When I turn on the computer it opens to my admin user account where I have access to everything. 
    I used Migrations Assistant to move my Settings and Users from my Power PC to my Mac Pro.  That seemed to to successfully. 
    So I now have four users on my Mac Pro:  RLE 5 (the admin user from my Power PC with the password), Mac Pro (my admin user which does not require a password), and two guest user accounts.
    I turn on my Mac Pro and it opens to my Mac Pro admin user account.  I don't need to sign in.  No problem. 
    I log out of Mac Pro.  On my screen are the four user accounts.  I click on RLE 5 (which was my admin user account on my Power PC that I migrated over to my Mac Pro) to log into that account and it asks me for a password.  I type in the password I used for my Power PC.  It keeps telling me it is the incorrect password.
    I cannot log into my user account RLE 5 on the Mac Pro.  I am being told I have the incorrect password. I've gone to System Preferences>Accounts and changed the password.  It doesn't make a difference. 
    Also I cannot log into the Guest User account that migrated from the Power PC to the Mac Pro for the same reason.  I have also tried to change the password for that Guest User account also but with no luck. 
    Another interesting thing has happened.  I decided to give my Mac Pro admin user account a password by going to System Preferences>Accounts.  But when I do a test to sign into my admin user account Mac Pro it tells me it is the wrong password.  Luckily I can reboot the computer and it opens to my Mac Pro user without asking for a password.  But if I log out of Mac Pro and try to then sign back in with the password it tells me it is the incorrect password.
    Any suggestions would be appreciated.

Maybe you are looking for